The price has been drastically reduced. 2021/10/28 sales price 278,000 yen Maintenance was completed in 2024/7. An attractive 2-way floor type speaker with clear sound image localization and a wide sound field. Although it has a design that exudes a high-quality atmosphere, it is a model that does not hurt even when purchased due to its design, and its ability as a speaker also shines. There are repair marks on the top plate (Oikawa Tetsuji),
Maintenance information: 2024.10.28 Operation confirmed
2024.7.25 Maintained (exterior repair/cleaning. Saran net replacement.. Single side woofer frame repair Driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal/vise cleaning)
Accessories: jumper plate (on order)
Main specifications: 2 way 2 speakers, frequency band, 30 Hz to 20 kHz, crossover, 750 Hz, sound pressure level, 94 dB, impedance 6 ohms, maximum input, 200 W, W561 x H1,115 x D406 mm, 56.8 kg/book
The price has been drastically reduced. 2024/10/28 sales price 258,000 yen 2020 maintenance completed. There are some scratches, so it's cheap. An attractive 2-way floor type speaker with clear sound image localization and a wide sound field. It is a model with a design that exudes a high-quality atmosphere, so it won't hurt even when bought, and its ability as a speaker also shines. The exterior has dullness, dirt, and small scratches (Oikawa Tetsuji)
Maintenance information: 2020.10.31 maintenance completed (exterior repair/cleaning, saran net replacement, woofer edge replacement, driver magnetic circuit slit cleaning/center adjustment, sound-absorbing material replacement, terminal contact cleaning)
Accessories: jumper plate
Main specifications: 2 way 2 speakers, frequency band, 30 Hz to 20 kHz, crossover, 750 Hz, sound pressure level, 94 dB, impedance 6 ohms, maximum input, 200 W, W561 x H1,115 x D406 mm, 56.8 kg/book
Interior and exterior maintenance has been completed, including edge replacement! A 2-way system equipped with a large horn and professional driver typical of JBL. You can enjoy the exhilarating feeling unique to JBL with good extrusion in the mid and low frequencies and wide dynamic range of sound reproduction. It is an attractive speaker that makes sounds with good momentum, and is also easy to play. Serial J090-010404 J090-010404 (Kobayashi Hitoshi)
Maintenance information: 20.24.10.30 maintenance completed (exterior repair/cleaning saran net replacement woofer edge replacement driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning)
Accessories: saran net, jumper plate
Main specifications: 2 way, 2 speakers, bass reflex system, floor type frequency band 32 to 2 kHz, crossover 950 Hz, sound pressure level 92 dB, 6 ohms, W561 x H985 x D406 mm, 52.3 kg/book
The price has been drastically reduced. 2024/10/20 sales price 29,800 yen. Currently sold. This D/A converter is compatible with ORB CD and high-resolution DSD format playback. By adopting Barbrown's PCM1792A and R-core transformers that are compatible with both PCM and DSD, etc., I have the impression that they reproduce clear and thick mid-high frequencies and spacious low frequencies compatible with full genres. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.10.20 sound output confirmed
Accessories: instruction manual, power cord, original box
Main specifications: input terminal: 1 USB B terminal, 1 RCA terminal, 1 system output terminal: RCA terminal 1 system compatible sampling frequency: USB PCM, 32 kHz to 192 kHz (16, 24 bit) DSD, 2.82 MHz, 5.64 MHz (1 bit) coaxial: PCM, 32 kHz to 192 kHz (16, 20, 24 bit) W220 x H50 x D220 mm Weight approx. 1.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/10/20 sales price 348,000 yen Interior and exterior fully maintained, including woofer edge replacement! floor-mounted speaker system. The enclosure also has plenty of capacity, so you can enjoy low frequencies with a sense of volume. Equipped with a 175 DLH, the excellent blow up is excellent. It features a well-balanced sound that you won't get tired of, and you can feel the power of the bass and the depth of the sound. Serial 9976, 9978 (Fujisawa Yukishi)
Maintenance information: 2024.10.20 Maintained (exterior repair/polishing/clear finish, front and rear baffle repair/painting, woofer maintenance: edge replacement, cone paper coating, terminal cleaning/screw replacement, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement
Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning, screw replacement)
Accessories: saran net (not original)
Main specifications: bass reflex LE14+175DLH+LX10 8Ω W550 x H750 x D390 mm (net not included) weight approx. 38 kg
The price has been drastically reduced. 2024/10/21 sales price 22,800 yen. XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.10.20 Continuity confirmed (No. 1 has continuity regardless of the selector)
Accessories: none
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
Uses the 2.0m power cable “PCOCC-A,” which has a reputation for high sound quality. By using silk thread as an intermediary, it absorbs ultra-fine vibrations and is compatible with high-resolution sound sources in the high sound quality music distribution (HQM) era. It has high S/N, a wide range, good sound loss, and a clear outline, and good visibility, but it's also soft, so I don't feel stressed when listening to it. There are abrasions and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.10.26 continuity confirmed
Accessories: original box
Comes with original box! Analog disc warpage correction machine. By achieving accurate temperature control and time control, it is an audio accessory that corrects warping and distortion on vinyl records without being affected by the ambient temperature due to the season or region, and makes it possible to play back. The exterior has a feeling of use such as dullness. Serial 234201575 (Tomonori Asaine)
Maintenance information: 2024.10.28 Operation confirmed
Accessories: instruction manual, copy, power cord, cloth, original box
Main specifications: size W471 x H93 x 493 mm weight 11 kg
24K gold plating with a purity of 99.9% or higher, used for jewelry use, is applied to the 1.5m power cable terminal to improve conductivity and connection stability. The clear and delicate sound field is nice. The exterior is good with little feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.10.27 continuity confirmed
Accessories: original box
Uses the 2.0m power cable “PCOCC-A,” which has a reputation for high sound quality. By using silk thread as an intermediary, it absorbs ultra-fine vibrations and is compatible with high-resolution sound sources in the high sound quality music distribution (HQM) era. It has high S/N, a wide range, good sound loss, and a clear outline, and good visibility, but it's also soft, so I don't feel stressed when listening to it. There are abrasions and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.10.26 continuity confirmed
Accessories: original box
The degree is good! Orb's super dreadnought power strip. The 70mm thick aluminum body provides high rigidity, and the amorphous shielding performance enables clear and speedy sound. There are wipes, but the condition is generally good (Murakoshi Yoichi)
Maintenance information: 2024.10.27 continuity confirmed
Accessories: original box, instruction manual
Main specifications: 100V maximum 1500W inlet x 2, outlet x 8 configuration W350 x H70 x D190 mm kg
ORB's 3-channel power amplifier speaker selector. The high cost performance is attractive. There are scratches and stains (Daiki Goto)
Maintenance information: 2024.10.2 operation confirmed
Accessories: none
Main specifications: 1 input 3 output, 3 input 1 output compatible terminal, gold-plated multi-binding post, silver-plated contact mechanical (rotary) switch W250 x H64 x D142 mm (including protrusions), approx. 2.4 kg
The price has been reduced. 2024/10/20 sales price 25,000 yen. Currently sold. ORB's pre-main amplifier with built-in tube headphone amplifier. A vacuum tube 6922 (E88CC) is used for the first stage of the pre-section, and IcePower, which has a reputation for clear sound quality, is used for the power section, and the sound quality combines softness and subtlety. Also, the body uses thick aluminum material (2.5 mm) with excellent electromagnetic shielding effects for the front and rear panels, and attention has been paid to noise blocking efficiency, which makes a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.10.20 Operation confirmed
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: input terminal, analog (rear), RCA terminal, 1 system, analog (front) stereo mini jack, 1 system, recommended load impedance 3 to 8 ohms, headphones, φ6.3, stereo jack x 1, recommended load impedance 16 to 600 ohms, rated output 35 W+35 W (4 ohms), 20 W+20 W (8 ohms), W139 x H171 x D171 mm, approx. 1.5 kg
The disposal price has been reduced (member prices are not applicable). 2024/7/25 sales price 1,480,000 yen driver, network maintenance completed! A domestically produced box model of Paragon's younger brother Metrogon has appeared. The unit configuration is 130A, LE175, H5040, and N1200. When an analog record and a vacuum tube amplifier are connected, an indescribably subdued and tasteful sound spreads. The exterior is entirely glossy, and there are tape marks and bumps (Sasaki Shota)
Maintenance information: 2024.7.25 Maintained (driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: none
Main specifications: 2 way 2 speakers 130A, LE175, H5040, N1200 W1870 x H775 x D630 mm, weight cannot be measured, 100 kg or more
The price has been reduced! 2024/10/13 sales price 18,000 yen A balance line selector that uses high quality parts everywhere. There are 3 types: 1 input and 1 output. The terminal uses a high quality gold-plated XLR jack, and it is a very high quality selector that is particular about sound quality at a low price, and does not make you feel any deterioration in sound quality. (YONEJIMA Satoshi)
Maintenance information: 2024.10.13 operation confirmed
Accessories: instruction manual
Main specifications: multi-changer (1 input, 3 output types), gold-plated XLR terminal, mechanical (rotary) switch/non-shorting switching/simultaneous H/L/COM switching, W200 x H70 x D142 mm, 1.05 kg
The disposal price has been reduced! (Not eligible for member discounts) 2024/9/5 sales price 75,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The supports are filled with filler (sand). The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
A record cleaner that indirectly imparts moisture to the case by adsorbing liquid onto the sponge inside the case. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2024/5/13 sales price 75,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the goal of suppressing speaker stress by absorbing and releasing it without applying a load due to the diamond formation structure (Daiki Goto)
Accessories: spikes, T-PROP
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg