Record stabilizer from unknown manufacturer. It has a gold-plated finish, and the design looks great. There is a slight feeling of use such as a thread (Yamato Yuki)
Main specifications: diameter 80 mm, height 30 mm, dead weight 289 g (both measured)
※It has a cigarette smell, so it's cheap. JOB's power conditioner will be in stock for the first time in about 4 years. Genuine Zephan product. Can be used up to 800W. AC noise reduction, sound energy, wide sound field, good sound quality of each one, and improvements in speed can be expected. There are dirt and scratches on the exterior. *One side outputs 100V and the other side outputs 110V. Serial 21103915 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: No accessories
Main specifications: capacity 800 W external dimensions W150 x H55 x D 208 mm 3.22 kg
※It is inexpensive because it is in poor condition such as scratches and dirt. An audio board that uses carbon, which is effective in absorbing slight vibrations. It brings out the smoothness and excellent resolution of the entire band. It's easy to feel the effects in a room with good SN. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: none
Key Specifications: W482 ✕ D380 ✕ H20mm Weight 5.6 kg
※It is inexpensive because it is in poor condition such as scratches and dirt. An audio board that uses carbon, which is effective in absorbing slight vibrations. It brings out the smoothness and excellent resolution of the entire band. It's easy to feel the effects in a room with good SN. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: none
Key Specifications: W482 ✕ D431 ✕ H20mm
The price has been reduced! 2024/4/12 sales price 84,800 yen This is a genuine manufacturer stand for B&W805D3. The logo on the bottom of the stand gives off a sense of luxury. It's designed with sound quality in mind, so I think it's worth trying it out. There is dullness and scuff marks. Serial 1942-0007869/1942-0007869 (Fujisawa Yukishi)
Accessories: instruction manual, rubber foot, spike, fixing screw, hex
Main specifications: W255 x H595 x D370 mm 13 kg
Unspecified CD storage case. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Main specifications: W305 x H290 x D172 mm 2.3 kg (actual measurement)
Unspecified CD storage case. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W305 x H290 x D172 mm 2.3 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/11 sales price 99,800 yen This is the ultimate version of the P-1. It is a pure A grade specification, which is rare for a headphone amplifier, and you can enjoy more detailed and clear playback sound. There is a thin line scratch on the top plate and a small scratch on the upper front, but there are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.1.11 Sound output operation confirmed
Accessories: copy of manual, power cable
Main specifications: 2W+2W (8Ω) 1W+1W (16Ω) high sound quality feedback circuit “ODNF3.0A”, 2 headphone outputs, 1 RCA/XLR input each, W440 x H82 x D408 mm 8.3 kg
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. There are slight stains, small scratches, and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: case
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
Kojo Seiko outlet tap. It consists of 3 parts: top cover, bottom chassis, and subchassis, which inherits the concept of the popular “Force Bar” series. A powerful machine that is particular about materials such as body materials, tin-plated internal wiring, and TAOC vibration-absorbing sheets. There are some small scratches (Murakoshi Yoichi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Main specifications: 3P outlet x 6, 2P outlet x 1 1,500VA AC100V (rated AC125V) W59 x H37 x D363 mm 1.089 kg
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
※Inexpensive because it smells like tobacco and is in poor condition. PSE certified product. A popular 6-prong power strip. The metal case has excellent rigidity and shielding, and Belden OFHC material is used for internal wiring. This best-selling model is popular for its thick sound image and ease of use. There is a strong feeling of use on the exterior, dirt, paint peeling, rust, etc. on the entire exterior (Murakoshi Yoichi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Main specifications: 3P type x 2, 2P type x 4 ports, cable length 2 m
※Inexpensive because it is in poor condition. A rare SD-45 under the name ULTRACRAFT. It has the same configuration as the same Audiocraft model. As is on the LP, it can also be used as a doughnut board if you turn it over and use it together with the adapter. There is red paint on the logo, paint has fallen all over, and there is a lot of dullness (Murakoshi Yoichi)
Accessories: 45 rotation adapter
Main specifications: brass material, self-weight 500g
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/3/6 sales price 45,000 yen Accuphase built-in phono equalizer board. For analog record playback, you can switch MM/MC equalizer gain, set MC input impedance, and subsonic filter ON/OFF with an internal dip switch. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main Specifications: Compatible Models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530,, *In the case of E-550/E-350/E-450/C-2110, MC/MM switching is performed on the panel surface, so there is no need for settings on the board. E-550 E-350 E-450 C-2110
The price has been reduced! 2024/4/13 sales price 5,000 yen LINN remote control. Details are unknown, but it is similar to EXOTIK and UNIDISK 1.1 remote controls. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.13 operation confirmed (infrared checked)
Accessories: none
The price has been reduced! 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
Unopened Unspecified spikes, set of 4 spike receivers The exterior is unopened, but it is dull (Kobayashi Hitoshi)
Accessories: none
Key Specifications: Spike length 40mm insulator W17mm H6mm
Unspecified transformer case. The exterior is probably an unused item (Kobayashi Hitoshi)
Accessories: screws
Main specifications: W110 x H115 x D130 mm weight 1.3 kg
A high-precision level gauge that is essential for leveling players. This is a long-selling model with an aluminum body (Tomoho Asae)
Accessories: none
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Set of 4 banana plugs There is a description of NAKAMICHI, but the details are unknown. It is small and seems to be easy to handle. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Set of 4 banana plugs There is a description of NAKAMICHI, but the details are unknown. It is small and seems to be easy to handle. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Set of 2 RCA short pin plugs from the “Stereo” magazine appendix. By shorting unused input terminals, the circuit is stabilized and sound quality is improved (Asaine Tomo)
Accessories: none
Unspecified spike receptacle set of 3 There is a feeling of use due to appearance, dullness, scratches, etc. (Asaine Tomoho)
Accessories: none
Main specifications: size 30φheight 10mm weight 16g
※It has a cigarette smell, so it's cheap. XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). The exterior has dirt and paint bald spots (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
※It is inexpensive because it has a cigarette smell, dirt, and deposits. Premium power amplifier/speaker selector. It uses a silver-plated contact mechanical switch to convey the original sound quality as it is. As a speaker selector, you can switch and select up to 3 pairs of speakers from one power amplifier output. Alternatively, as an amplifier selector, you can switch and select up to 3 power amplifier outputs for a pair of speakers. There are scratches, adhesions, and dirt on the exterior (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 3 inputs/1 output system, or 1 input/3 output systems, continuous passing power 250W (8Ω), W250 x D142 x H64 mm, weight 2.4 kg
Comes with original box A machined aluminum alloy separate structure and parallel wiring are realized at this price. The SAA-6SZ MK2 uses the latest independent wiring “super separate” and spike legs, and the center outlet uses a rhodium-plated outlet. Highly recommended for those who prefer vivid resolution. Serial A061411MR (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: original box
Main specifications: rhodium outlet x 1, BRYANT outlet x 2 W400 x H70 x D43 mm 2.5 kg
This is a collet chuck stabilizer. Since it is a type where the center spindle is tightened when the center push button is pressed, it can be fixed more reliably. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: 59 mm in diameter x 34 mm in height, weight 164 g
Audiocraft brass disc stabilizer. Stable playback is possible with a tight weight. Comes with a stroboscope for convenience. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: diameter 79 mm x height 20 mm weight 730 g
The exterior of the woofer mounting clamp seems to be self-made in a set of 5, and in addition to corrosion and mounting marks all over, there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Mounting part, claw depth approx. 12 mm, 27 x 24 x 18 mm
The price has been reduced! 2024/4/12 sales price 3,000 yen ※Since operation has not been checked, it is currently on sale. A power distribution system composed of PD2 power distributors and DC cords. If you are looking for one, please take this opportunity. Velcro is attached to the bottom. Serial 095PD2069 (Tomonori Asaine)
Maintenance Information: 2024.4.12 Operation Unchecked
Accessories: instruction manual, AC adapter, DC cord
Main specifications: size 160 mm 35 mm 110 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/15 sales price 1,000 yen It seems to be a VELA series saran net, but details are unknown. It is a 4-point magnetic type. The condition is generally good. If you've been looking for one, why don't you take this opportunity (Tomonori Asaine)
Accessories: none
Main specifications: 160 mm in diameter (actual measurement)
The price has been reduced! 2024/4/11 selling price 5,000 yen unspecified armrest and base set. It is similar to the micro RX-1. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
Main specifications: armrest size W15m x H75mm base hole inner diameter 17mm length 120mm (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/22 sales price 1,000 yen*1 is the pillar of the company's “CL Series” and “XL Series” racks. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: pole length 200mm
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
Self-made bulk capacitor with unknown details. Sound quality is enhanced, and response can be expected to improve. The exterior is generally good (Hiroki Aso)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: none
These are 6 outlet caps whose details are unknown. Definitely for those who like to write their own. In addition to being dull on the exterior, there is a feeling of use, such as the damping sheet being partially peeled off (Hiroki Aso)
Accessories: none
Main specifications: size: width 35 m x height 30 mm, total pin length 3.5 mm (actual measurement)
A set of non-original remote control and light receiver for Studer. Operation has been confirmed with the D730 at the store. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: none
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. There is dullness and dirt (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
A rare item has arrived. Carbon arm pipe with integrated shell for STAX UA-70N/UA-90N How about if you're looking for one? (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: overhang gauge