The SINTRA series, which is Lloyd's hidden masterpiece, and the rare SINTRA IMPROVED have arrived. Using a dome tweeter jointly developed with SCAN SPEAK, a uniquely designed bass reflex port reproduces clear sound with reduced resonance. The sound absorbing material around the tweeter is peeling off, there are small scratches, and dents (Daiki Goto)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: original box
Main specifications: 2 way 2 speakers, 8 ohms, W305 x H203 x D190 mm, weight 7.8 kg (actual measurement)
This is Sun Valley's Western 91 300B single amp. It plays an expansive and powerful sound, and although it has an output of 8W+8W, it is a very practical and high quality model. The balanced yet glossy tone from low to high frequencies is attractive. The internal relay has been modified, and the power supply can be switched on and off with a single switch. There is writing on the main body (Sasaki Shota)
Maintenance information: 2024.5.18 Maintained (missing screws added. Subchassis installation defect correction. Fix solder defects. Vacuum tube pin cleaning. Condenser position correction. Solder dregs and wire breakage scum removed* Bias checked and output sound checked. (Current load IMP is set to 8 ohms)
Accessories: manual, power cable
Main specifications: output 8W+8W vacuum tube 300B ✕ 2 310A x 4 5U4G ✕ 1 W400 x H210 x D300 mm weight 23 kg
Scarce! Vintage join Made In GDR (former East Germany) 20cm full range speaker. I immediately rang it at the storefront. It's an old full range speaker, so to be honest, the high and low frequencies don't come out at all compared to modern speakers, but the old piano trio is a perfect match and the mid-range is rich. The speaker has an attractive, soft, and deafening sound without making a harsh sound. There are scratches on the corner of the cabinet, and there are small scratches and line scratches overall (Sasaki Shota)
Maintenance information: 2024.5.18 Sound output operation confirmed
Accessories: none
Main specifications: 20cm full range 5Ω W315 x H525 x D210 mm 9.1 kg (actual measurement)
Maintained by the manufacturer! It is inexpensive because it has 230V specifications. Please use the included step-up transformer. The sound with a firm outline and no hesitation is unique to VRDS. The freshness of the sound and the straight sound image are advantages that cannot be obtained on CDs in recent years (Sasaki Shota)
Maintenance information: 2024.5.18 Maintained by the manufacturer (The function switch has been replaced. Gears and belts have been replaced. Each part has been inspected and adjusted)
Accessories: remote control, manual, power cable, original box, step-up transformer, insulator
Main specifications: 20-bit DAC dimensions W442 x H145 (153 mm when using foot) x D344 mm weight 16.5 kg
A Sony ES class stereo integrated amplifier aimed at high-quality music playback. We are particular about high-resolution playback, and are reviewing basics such as high-capacity power supplies and high-rigidity symmetrical chassis. Also, there is impedance switching for headphone users, making it convenient as a high-end headphone amplifier. The sound quality is clear and clear. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: audio input RCA x 4, XLR x 1 (No. 2 HOT) practical maximum output 120+120W rated output 80+80W, speaker compatible impedance 4 to 16 ohms, W430 x H130 x D420 mm, 17 kg
Mono exclusive MC cartridge. It's not flashy, but it stretches and makes a gentle sound that is pleasant. There is a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.5 mV needle pressure 2.5 to 4.5 g dead weight 5 g
The disposal price has been reduced (member prices are not applicable). 2024/5/15 sales price 298,000 yen Orthophone Japan has been maintained! One owner item! It is a system equipped with the company's WTB-211 tonearm. The sound quality created by the wooden base and heavyweight metal turntable is a player that achieves well-balanced sound quality from low to high frequencies. It is a system that can be used stably without the need for frequency conversion (pulley), and allows you to fully sense not only the MM needle, but also the delicate nuances of the MC needle (Oikawa Tetsuji)
Maintenance information: Maintained by 2024.5.11 Orthophone (bearing replacement, correction process, operation confirmed)
Accessories: power cable, strobe, instruction manual
Main specifications: thread drive speed 45/33 W 470 x H250 x D370 mm 35.5 kg tone arm execution length 229 mm effective length 214 mm overhang 15 mm compatible cartridge weight 18 g to 26 g (shell cartridge included)
Maintained! The strength of the extrusion of the entire range and the clear sound are truly sounds unique to the heyday of JBL. The mid-high range with a unique sense of spaciousness and strong linearity makes hard bop and trumpet sounds pleasant. The sense of volume in the mid to low range is also attractive not found in modern speakers. The exterior has been beautifully finished due to maintenance (Mizusaki Ryo)
Maintenance information: 2024.5.11 maintained (exterior repair/polishing/oil finish, front and rear baffle/horn repair/painting, saran net replacement/frame repair, woofer edge replacement, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, unit detachment)
Accessories: saran net
Main specifications: 2-way bass reflex, 30cm woofer, frequency band, 40Hz to 16kHz, impedance, 8Ω, sound pressure level, 91 dB, dimensions W406 x H635 x D311 mm, weight 26 kg/book
Maintained! A power amplifier using the AB/LR independent power supply system, which is a further development of the A class B class 2 independent power supply system. Contrary to its solid appearance, it has a beautiful sound with a sense of transparency. The sound quality is moderately tight and firm, and it naturally handles crisp and energetic intonation expressions. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.12 Maintained (replacement of defective output relay contacts. (Replace deteriorated capacitors in power supply circuits and other circuits)
Accessories: none
Main specifications: 100W+100W (8Ω) compatible speakers 4Ω to 16Ω SNR 110dB W420 x H166.5 x D300 mm 19.2 kg
The price has been drastically reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply unit
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
The price has been drastically reduced. 2024/5/15 sales price 398,000 yen Maintained! Kelly's SACD player. The high-class exterior is impressive with its sturdy aluminum housing and large spike equipment. The sound it creates is also bright and precise. In particular, when the CD software is upconverted to 96 kHz or 192 kHz, you can enjoy precise sound with a unique lightness. There are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (The servo mechanism Assy has been replaced. The uneven parts of the top plate have been corrected as much as possible. The CD mechanism is removed from the chassis, the tray drive part is repaired, the grease on each part is removed due to dust adhesion, and Gushi-Mochi is re-coated. The damaged tray suppression mechanism has been repaired.
The cable has been fixed because the wiring styling is sandwiched between the shield case.)
Accessories: instruction manual, power cable, remote control
Key Specifications: SACD Player D/A Converter: Barbrown 1782u, 8 pieces parallel operation. Digital filter: using Pacific MicroSonic PMD200 W457xH127xD380mm 22.7kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi)
Accessories: none
Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its rich sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches, dullness, and discoloration in places (Kojima Yosuke)
Maintenance information: Maintained on 2020.8.26 (2 input volumes, 4 semi-fixed volumes, 2 RCA plugs, 12 lamps, 8 electrolytic capacitors, replacement input mode switch disassembly cleaning, card edge cleaning, soldering, bias and offset check, output sound check)
(*The interior and exterior have been cleaned.)
Accessories: power cable
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ/7 kΩ secondary: 4/8/16 Ω W56 x D50 x H80 mm 0.79 kg/piece with original box (Kojima Yosuke)
Accessories: original box
Sold 1 bottle, 6SL7 high-reliability tube, made in America, red brown base, black plate, measured value 58 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Power transformer hammer tone color primary: 100V/FUSE1A secondary: 280-250-0-250-280V/AC0.12A 5-6.3V/2A 6.3V/1.5A x 2 W85 x H76 x D71 mm approx. 2.3 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Pair tube EL34 compatible sphere made in Japan black plate measured value 54/54 (rejected value 30) with white box, the printing design is different on the left and right, but the internal structure is the same ※Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Choke transformer 0.9 H/260 mA DC resistance 26.8 ohm (actual measurement) choke transformer mounted on A3600, etc. W55 x H71 x D50 mm 0.7 kg (actual measurement, not including protrusions) There are scratches and paint peeling in places (Kojima Yosuke)
Accessories: none
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ secondary: 4-6-8 Ω W50 x H81 x D58 x 57 mm 0.86 kg (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Digital cable, 1.0m, RCA terminal, zero crystal silver conductor, has good sound accuracy for faint sounds, and is characterized by a steady sound. It is a cable that can be obtained at a relatively low price among the company's cables, which have many high price ranges (Kojima Yosuke)
Accessories: none
Speaker cable, 1.5 m pair by wire specification, EQB8, Y lug specification at both ends, 7N-OCC Copper conductor top model, high CP cable with sound quality close to Eclipse 8 while keeping the price low. This cable is excellent for SN and has just the right amount of softness for sound (Kojima Yosuke)
Accessories: special case
Pair tube, ambient heat beam tube, 5881 equivalent tube, made in America, JAN brown base measurement value 42/42 (rejected value 25) with white box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube EL34 compatible ball, black plate, made in Japan, measured value 54/54 (rejected value 30) with original box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Power transformer hammer tone color primary: 100V/FUSE1A secondary: 280-250-0-250-280V/AC0.12A 5-6.3V/2A 6.3V/1.5A x 2 W85 x H76 x D71 mm approx. 2.3 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Sold 1 bottle EL34 compatible ball, made in Japan, black plate, measured value 52 (rejected value 30) with original box, there is a slight getter burn ※ pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Power transformer primary: 100V secondary: CT-6.3V/3A x 2, 5-6.3V/3A, 350-310-40-0-310-350V/20mA DC200mA W104 x H92 x D88 mm approx. 4 kg (actual measurement, not including protrusions) There are small abrasions and paint peeling in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 90-100-110V secondary: CT-6.3V/1.2A, 5V/2A, 6.3V/2A, CT-6.3V/1.2A, 250-220-0-220-250V/DC130mA W85 × H68 × D71 mm approx. 1.8 kg (actual measurement, not including protrusions) with original box (with writing on the box) (Kojima Yosuke)
Accessories: original box
※Only 1 output transformer push-pull output primary: 4 kΩ Secondary: 4-8-16 Ω W53 × H65 × D69 mm 0.8 kg (actual measurement, not including protrusions) There are paint peeling and rust spots in places (Kojima Yosuke)
Accessories: none
The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The Fostex 20cm double woofer enclosure D-70 is a plywood cut service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in stereo magazines at the time, and this is not a genuine assembly kit. There is no difference in dimensions or material. Wiring, SP terminals, detailed instructions, etc. are not included. If you can understand it, and if you are a self-made person, how about DIY this summer!? *The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications:20cm Backload Enclosure for Double Woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight approx. 93.6 kg
The primary side of the self-made MC step-up transformer equipped with TANGO's MCT-999 is connected to 40 ohms, and the sound output has been confirmed with the DL-103. It has a well-made, thick vintage sound. There is a feeling of use on the exterior such as scratches and threads (Tomoho Asaine)
Maintenance information: 2024.5.13 sound output confirmed
Main specifications: 1st order: 2.5/10/40 Ω boost ratio: 40/20/10 2nd order: 1 Vrms 0.8 kg (actual measurement)
The price has been drastically reduced! 2024/4/27 sales price 298,000 yen Interior and exterior maintenance completed! English studio monitor with TANNOY HPD385 installed. It's deep and you can feel that the scale is wide, and the size is clean, so the room's layout will expand. The exterior has been beautifully finished due to maintenance (Tomoho Asaine)
Maintenance information: 2024.4.27 Maintained (exterior cleaning/repair
Saran net replacement unit maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, fastener polishing) unit detachment network maintenance frequency characteristic check ATT cleaning high range capacitor replacement (3.3 uf, 4.8 uf) 4 pin terminal contact cleaning)
Accessories: none
Main specifications: size W510xH769xD380mm weight 32.2 kg (actual measurement)
Maintained! A power amplifier with a characteristic large meter. A straightforward tone with no peculiarities. There is momentum unique to the 80s, and you can enjoy crisp sound quality. It is also ideal as an introduction to separate amplifiers. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.14 maintained (output relay, meter relay replacement, indicator lamp replacement, meter lamp replacement, volume replacement, operational amplifier replacement, solder repair, interior and exterior inspection and cleaning, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) 170W+170W (4Ω) frequency characteristics 1Hz to 100kHz impedance 4Ω to 16Ω W450 × H174 × D422mm 18.5 kg
Refresh yourself with internal and external maintenance! This is an attractive mid-size model with the large 38cm HPD385 unit pressed into a compact enclosure. It has good phase characteristics and plays classical music and vocals in a pleasant tone with a high texture and a good, moist tone (Mizusaki Ryo)
Maintenance information: 2024.5.11 Maintained (exterior repair/cleaning
unit assembly)
2019.12.30 Maintained (input terminal rust removal (pickling) treatment, cleaning. Internal connection terminal (faston) replaced with a new one. Output terminal polish cleaning. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Exterior repair/polishing/oil finish. Front and rear baffle/hakama paint Saran net replacement. Unit maintenance (low range side: edge exchange, magnetic circuit gap cleaning center adjustment, high range side: magnetic circuit gap cleaning center adjustment) unit detachment)
Accessories: none
Main specifications: coaxial 2-way speaker, front bass reflex system, 8Ω, 91 dB, W540 x H840 x D310 mm, 32 kg
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. The exterior has scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance information: 2024.4.15 Maintained (1 deteriorated transistor has been replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. (Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, Remo pin x 2, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The Luxman selected tube set 12AX7 x 3/12 AU7 x 5 (with LUXMAN logo) 12AX7 is a GE print with the same structure as Siemens from the same period made in Yugoslavia, and the 12AU7 is a high-reliability type (6189) measuring instrument made by GE and seems to be an unused item due to the state of the tube measured by the TV-7 measuring instrument TV-7 made by GE! (KOJIMA Yosuke)
Accessories: original box, warranty card
MQ-360 vacuum tube set Lux selected product 6550A x 4, 12AU7 x 2, and 6FQ7 x 2 configurations 6550A is made by GE, 1 12AU7 is made in Yugoslavia, the other is a GE black plate specification, and the 6FQ7 all seem to be made by GE, and the printing is peeling due to aging, but it seems that it is an unused item due to tube condition! Both spheres have already been measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box, warranty card
There was no problem with the sound output, but it's cheap because the woofer center caps are dented on both sides. Comes with a genuine stand! 77XG series bookshelf Equipped with a P.P.D.D. woofer using a glass fiber cone and a super tweeter that can play up to 120 kHz, the clean and clear sound is attractive (Sasaki Shota)
Maintenance information: 2024.5.16 sweep test good
Accessories: genuine stand
Main specifications: 3-way 3-speaker bass reflex type anti-magnetic design frequency band 40Hz to 120kHz impedance 6Ω sound pressure level 88dB dimensions W210 x H360 x D273 mm weight 6.7 kg/book
※The woofer cap has a dent, so it's cheap. Denon tall boy speaker It is a model with high cost performance for both theater use and pure audio use. Since it has a double woofer configuration, you can enjoy low frequencies larger than its size. It plays any genre, such as jazz, pop, or rock. The exterior is dull overall, paint is chipped on the front corner, and there are conspicuous line scratches on the back side (Mizusaki Ryo)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: jumper plate
Main specifications: 3-way 4-speaker bass reflex crossover 2kHz, 13kHz 90dB W270 x H1130 x D325 mm 24.8 kg
Maintained by the manufacturer! Marantz Primaine has an attractive thin and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers also go well together, so you can choose any music genre. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.16 Checked by the manufacturer
2023.12.3 Maintained by the manufacturer (Source Direct has gaps. No parts are available. Contact cleaning. Power switch movement correction (because it is not available). (Other operation checks)
Accessories: remote control, instruction manual, power cable
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
Granite speaker stand by Ishizo Unkei. It has been mirrored and has a careful finish. It contributes to damping the vibration and tightening of the sound of small speakers (Ryo Mizusaki)
Accessories: none
Main specifications: top plate W160 x D220 mm bottom surface W220 x D270 mm height 605 mm weight 17.3 kg
※The spikes are out of stock, so it's cheap. A perfectly sized round top plate is used for B&W's “805 Series”. This speaker stand is made of lightweight magnesium alloy with a high vibration absorption rate (Shota Sasaki)
Accessories: none
Main specifications: top plate W226 x D304 mm bottom plate W238 x D317 mm height 600 mm weight 14 kg
Speaker cable, 1.9 m pair, sold out type, untreated ends, Acrolink 6N series, which is natural and has no habit. At first glance, it's no different from the S1000/2, but the sheath diameter is one size larger and the conductor is extremely thick. The sense of transparency, moderate sound pressure, and a flat yet firm, thick sound are attractive. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/9 sales price 128,000 yen One side tweeter has been replaced! The successor model to the super popular “IKON Series.” It is equipped with a unit that uses wood fiber cone paper. The mid and low frequencies are rich, and the high frequencies sound smooth. You can feel the depth of the sound clearly (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: original box, jumper plate
Main specifications: 3 way 4 speakers, frequency characteristics, 39 Hz to 30 kHz, crossover 700 Hz, 2.6 kHz, 14 kHz, efficiency 89 dB impedance 6 ohms size W188 x D352 x H1028 mm weight 17.8 kg
The price has been drastically reduced. 2024/3/11 sales price 80,000 yen The MEDIUM/LONG knob doesn't work, so it rotates idle, but it's a specification. QUAD tubular AM tuner. It is designed to take power from QUAD 2. Also, although the meter is an overseas specification, it is a domestic band specification. ※This is a mono specification. In order to play on 2 channels, it is necessary to connect the pin jack to the RADIO 2 terminal of QUAD2 and press the MONO and STEREO switches simultaneously (Daiki Goto)
Maintenance information: 2024.3.11 Maintained (・AM antenna ASSY added/IF/RF readjusted*Other operation checked. *When tuning with TUNE, the LCD on the right edge will open. After tuning in, it is common to listen on WIDE RANGE. Also, since the LONG WAVE circuit in this model has been removed, the LONG/MEDIUM selector is invalid and the knobs are dummy.)
Accessories: antenna cable
Main specifications: W270 x H95 x D15 mm 2.6 kg (actual measurement)
The price has been reduced. 2024/5/3 sales price 27,800 yen This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed)
Accessories: power cable
Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
The price has been drastically reduced. 2024/5/3 sales price 99,800 yen Hi-Res compatible USB-DAC, DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg