Maintained. An impressive pre-main with a glossy, elegant sound. The advantage of being equipped with MOS-FET is that visibility is good, and the good balance without feeling a sense of loss in sound is attractive. It is a model that can be enjoyed regardless of genre. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (speaker relay replacement, push SW replacement due to sound interruption when switching MUTING switches, replacement volume with replacement volume for sound output, other INPUT selector electric SW, Cartrich LOADSW, speaker rotation switch, direct INPUT switch, polishing and cleaning grease application for each disassembly contact, DC balance DC bias adjustment, due to large internal dirt (Since it is a VR replacement for cleaning and volume, the volume cannot be changed with the remote control since it is not electric)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) W470 × H165 × D435 mm 21.3 kg
Piezoelectric film super tweeter. With ultra-high frequency playback up to 120 kHz, I get the impression that you can hear the ultra-high range, realism, and even breathing. The exterior has a feeling of use such as dullness and small scratches (Tomoho Asaine)
Maintenance information: 2021.4.22 operation confirmed
Accessories: instruction manual, connection cable, AC adapter adjustment CD
Main specifications: Tweeter part: W125 x H88 x D93 mm body: W120 x H60 x D260 mm
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
The price has been drastically reduced! 2023/5/9 sales price 69,800 yen Maintained! It's a simple and easy to use preamp. Compared to the C-2, it has a clearer impression and allows you to listen to acoustic sources such as vocals and violin with a smooth sound. PHONO is also fully compatible with MM and MC. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.5.9 Maintained (replacement of faulty capacitors in the power supply circuit, replacement of power lamps. Solder correction on all circuit boards. (Disassemble switches, polish contacts and apply contact cleaner)
Accessories: none
Main specifications: PHONO2 system (MM/MC) LINE 2 system TAPE2 system size W435 x H96 x D369 mm weight 7.5 kg
All internal deteriorated capacitors and parts have been replaced! Furthermore, a new dust cover has also been created so you can use it comfortably. A masterpiece model of a semi-auto player. The torque and braking power of the motor are excellent, and the stability of operation is impressive. The sound quality, which is delicate and has an excellent sense of resolution, brings out the performance of the cartridge well. There are thin threads on the exterior. Serial 10700499 (Yonejima Satoshi)
Maintenance information: 2024.2.29 Maintained (new dust cover created, motor part removed, shaft and bearing cleaned and lubricated. The tact SW on the operation part and the electrolytic capacitor on the internal board were replaced with a new one. Resolder the board. Remove the area around the arm, clean each part after disassembly, replace the shaft bearing, inspect the internal lead wire, and reassemble. Dust cover hinge reinforcement bracket created. Exterior cleaning, cabinet scratch polishing, rotation speed check, operation test of each part, sound test)
Accessories: instruction manual, screws, EP adapter
Main Specifications: Quartz Lock DD Drive Auto Lift Up Static Balance Type Compatible Cartridge Weight 2 to 12 g Needle Pressure Range 0 to 3 g W490 x H182 x D410 mm 14.5 kg
The price has been reduced. 2024/4/27 sales price 79,800 yen This is a 3-way center speaker with the tuning that best matches the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
It's early plastic shell, but the interior has been replaced with a new one. The rich, rich SPU-like sound is attractive. The built-in transformer gives the impression that transparency and clarity have been improved. The exterior is broken into the plastic cover, and there is a feeling of use such as dullness. Serial 624056 (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: original box
Main specifications: MC type with built-in transformer, output 10 mV, needle pressure 3 to 4.5 g, dead weight 32 g
Both the interior and exterior have been maintained and brushed up! The OLYMPUS S8R representing JBL has arrived. The combination of thick, dry low frequencies, the sound of a driver that seems to blow fire, and the 075, which leaves a gritty feeling of realism, is impressive. Please enjoy the real thrill of vintage audio. The exterior is also beautifully finished (Yonejima Satoshi)
Maintenance information: 2024.5.11 Maintained (network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, exterior cleaning. Woofer maintenance: edge replacement, cone paper coating, passive cone paper coating. Exterior repair/polishing/oil finish, front and rear baffle/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. (Detaching the unit, repairing the diffuser)
Accessories: saran net
Main specifications: 3-way 3-speaker passive radiator system low range unit 38cm cone type (LE15A) mid range unit horn type (375) high range unit (075) passive radiator 38cm cone type (PR15) network LX5/N7000 sound pressure level 95dB allowable input 125W dimensions W1,020 x H670 x D510 mm weight 82 kg
Disposal price has been reduced (member prices are not applicable) 2024/4/13 sales price 35,000 yen Maintained! A premain amplifier with an impressive warm color sound while keeping the clear, easy-to-see sound typical of ONKYO. Recommended for classical music, female vocals, etc. There are dullness over time, scratches, etc. (Daiki Goto)
Maintenance information: 2023.10.17 Maintained (maintenance contents/tone, reck-out, MM/MC switch disassembly, polishing grease application, main amplifier part solder repair, output relay replacement, volume, switch cleaning, pin jack polishing, input/output confirmation, operation confirmation. (Even after tone SW decomposition and polishing treatment, a small pop sound is made when turned on and off, but there are no interruptions in the sound.)
Accessories: copy of instruction manual
Main specifications: W435 x H164 x D434 mm 14.9 kg
※The wood cabinet is being repaired. Maintained! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Oxygen-free copper (OFC) is used as the untreated conductor at the 6.0 m end of the speaker cable, and the 4-core structure reduces radiation noise. The sound quality has a relatively flat impression, so you can easily feel the sound quality a notch higher (Tomoho Asaine)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/1/20 sales price 99,800 yen ※The output terminals have been remodeled and 1 system has been added. This D/A converter has an impressive natural and supple texture. Another DAC board has been added to lock up to 48kHz. Equipped with a TOS optical input terminal, it is equipped with an Analog Devices 20-bit resolution DAC chip. It contributes to a rich amount of information. Soft and warm sound (Sasaki Shota)
Maintenance information: 2024.1.20 Operation confirmed
Accessories: power cord, BNC conversion plug
Main specifications: 20 bit 8 times oversampling 32 kHz, 44.1 kHz, 48 kHz digital input = BNC3 system, optical 1 system digital output = BNC1 system, TOS optical 1 system analog output = RCA1 system size W483 x H65 x D312 mm 5.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/10 sales price 69,800 yen Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: output 45W+45W (8Ω, Class B operation) 10W+10W (8Ω, Class A operation) 20Hz-20kHz power consumption rating 190W maximum 300W external dimensions 436 x H144 x D323 mm weight 13.5 kg
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
※1 bottle only. TOA large metal radial horn. In terms of sound quality, it has a narrower impression than Altec's sectional horn 311, but it has a bright sound with a sense of overhang unique to radial horns. *The diameter of the mounting hole seems to be slightly smaller than ALTEC, so there is a possibility that ALTEC's 1.5-inch drivers will not fit depending on individual differences. Overall, there are wounds, dullness, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: cross 500 Hz or more, horizontal 90 degrees, vertical 40 degrees, throat diameter 35.5 mm, compatible driver HFD-651, width 720 mm, height 220 mm, depth 580 mm, 10.9 kg
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.0 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.6 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.5 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
※1 bottle only. Speaker cable 2.0m is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and features a tight sound (Murakoshi Yoichi)
Maintenance information: 2024.3.29 continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2024/1/18 sales price 118,000 yen Maintained! QUAD's first transistor preamp. The deep sound image and the impression that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier. Of course, it's a combination with the 303, and the sound doesn't feel out of place even when paired with a vacuum tube power amplifier. BAL knobs are worn out (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (front push button contact failure → cleaning, PHONO/LINE in-board coupling capacitor replacement. AC spark killer capacitor broken → replaced, each VOL cleaned, power cable created)
Accessories: copy of instruction manual
Main specifications: external dimensions W550 x H110 x D220 mm, weight approx. 7.4 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
※1 bottle only. This is a 10 cm full range unit from FOSTEX. It is a very popular model for those who make their own speakers. The sound quality is bright and has an impression of tension. Dull, there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.8.11 sound output tested
Accessories: manual, original box
Main specifications: full range aperture 10 cm maximum input 15 W 8 ohms magnetic flux density 13000 gauss baffle aperture diameter 9 cm recommended enclosure volume 15 L
Since the condition is poor, such as cracks in the body, it is currently being sold. A small full-range speaker that is compact, can be placed freely, and has a gentle impression. The sound quality is soft and the sound is relaxed. You can see a feeling of use such as cracks, dullness, and abrasions on the exterior and body (Kobayashi Hitoshi)
Maintenance Information:2023.6.5 Operation confirmed
Accessories: none
Main specifications: full range compact speaker 8ohm maximum input 40W W230 x H150 x D163 mm 1.6 kg
Disposal prices have been reduced. Member prices are not applicable. 2013/7/23 sales price 298,000 yen ※ longitudinal vibration SP special gramophone. serial 6083. The Thomas Edison Sound is now being revived after 100 years. I am impressed by the well-conceived metal horn system, rotation adjustment mechanism, volume adjustment mechanism, etc. in the old fashioned way. There are scratches etc. on the cabinet that make it feel old. It has been repaired to a level where there is no anxiety about playback. Can be used normally (Yasuhito Koshihama)
Maintenance information: 2013.2.17 Maintained (sound box repair, spring repair, rotation adjustment mechanism repair, brake repair) 2013.7.23 operation checked
Accessories: handle, snail
Key Specifications: The needle tip of the sound box is a diamond. Horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)