A model commemorating the 40th anniversary of Accuphase's founding. The precision of sound unique to high-end products has increased dramatically. The “Balanced AAVA” with AAVA as a 2-circuit balanced drive is installed for the first time, and high-purity signal transmission is possible, making it possible to maintain highly accurate music playback, high signal-to-noise ratio, and low strain rate. Serial B1Y362 (Itsuro Mizushima)
Maintenance information: 2022.12.16 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: 6 analog unbalanced input terminals, 2 analog unbalanced output terminals, 4 analog balanced input terminals, 2 analog balanced output terminals, dimensions W477 x H156 x D412 mm weight 24.8 kg
※It is inexpensive because it has tobacco smell and tar stains. Manufacturer maintenance completed! The flagship model at the time when analog was in its heyday. The PHONO input is MM/MC compatible, and it is equipped with a head amplifier of excellent quality. The outstanding amount of information is attractive only for products from the night before the CD appeared. The sound quality of the line system also has a soft texture, and the expression is milder and more supple than later series. There is a feeling of use such as small scratches on the main body and small scratches and chips on the cabinet. Serial J3Y718 (Takasaki Atsushi)
Maintenance information: 2022.12.6 Manufacturer maintained (replaced with capacitors due to battery deterioration in Logic Ass'y. Replace the logo lamp. Replace the capacitor on the High Level Amp ASS'Y. The mode switch and others were replaced due to poor contact. Disassemble and clean the contacts of each volume and switch. Internal and external cleaning (tobacco smell cannot be removed). You can check each function and performance. Pressure resistance, safety check OK.)
Accessories: manual copy
Main specifications: 2 phono input systems (MM/MC) head amplifier switching (10 ohm/30 ohm/100 ohms) line input 3 systems output 3 systems (balanced/unbalanced x 2) W468 x H171 x D396 mm 18.1 kg
Clearance sale! (previous price: 348,000JPY)
Stereo pre-amplifier which is specified to play analogue sound. Phono is compatible with both MM/MC and impedance and gain could be switched to connect with various kinds of MC cartridges. This model produces rich and thick bass and amorous mid&high pitch. The top and corners of the body has some scratches.
Disposal price cut! (Member discounts are not applicable) 2021/7/4 sales price 168,000 yen maintained! Masterpiece preamp that can be said to be the culmination of the C-200 series! A model where the roughness of the sound is sharpened and delicacy stands out. It has an honest and clear sound quality that will add acuphase sound quality to any system. Equipped with a MC head amplifier, you can play records with high quality. The appearance has dullness and small scratches. Serial B2W600 (Satoshi Yoneshima)
Maintenance information: 2021.7.8 Maintained (input selector mechanism modification, bus treble SW cleaning, solder repair, tape copy, tape monitor, disk impedance SW ( DISC1 FRONT DISC) Disassembly polishing, Signal relay exchange, MM/MC switching relay exchange, Film capacitor exchange, Transistor modification, VR/SW cleaning, Internal inspection cleaning, Operation check )
Accessories: Instruction manual, power cable
Main specifications: Input/phono, 3 lines, 3 tapes W445 × H160 × D373mm 13.4kg
Disposal price has been reduced. Member discounts are not applicable. 2021/06/18 selling price 698,000 yen. The shadow of sound, and the expressiveness of motion and static are truly real. Delicate and clear high range, overall high clarity sound. The amplification unit and volume regulator are integrated, and the “AAVA” type volume is adopted without mechanical contacts. There are many benefits such as improved signal-to-noise ratio, reduced distortion rate, reduced frequency characteristics change, and no left and right volume errors. There are small scratches in appearance, but there are no noticeable scratches (Shota Sasaki)
Maintenance Information: 2021.6.18 Operation confirmed
Accessories: Remote control, description, power cable, connection cable
Main specifications: 7 input/unbalanced (RCA) systems (but two inputs can be used with OP board), 2 balanced (XLR) outputs and 2 balanced (XLR) and unbalanced (RCA) W477 × H156 x D412mm 21.6kg
※Since the MC head amplifier circuit cannot be repaired, an MC amplifier was created. Maintained! The C-240 was introduced in the latter half of the 1970s and has an eye-catching, button-type design. You can enjoy a relaxing sound with a high sense of transparency. It has two analog inputs and is equipped with an excellent head amplifier, making it a great specification for analog fans. There are scratches and scuffs on the exterior. (TAMURA Eiji)
Maintenance Information: 2023.6.15 Maintained (HF volume contact cleaning adjustment. Check each input/output operation again.) 2023.5.17 Maintained (MC circuit is defective and cannot be repaired, so the MC amplifier creation module was embedded. TAPE 2 and the switch lock are unstable, so the grease on the switch mechanism has been increased. Condensers have been maintained. Input/output operation check.)
Accessories: copy of instruction manual, power cable
Main specifications: 2 phono inputs, equipped with MC head amplifier, W466 x H188 x D391 mm, 18 kg
A/V control center where high-end home theaters can be built. Aiming for the highest quality with high sound quality and image quality in the audio and video parts, it achieves the same high sound quality playback as pure audio. Large scuffs under the front panel volume and sliding doors, rust on the glass panel mounting part and mounting screws, remote control battery holder lid and the entire interior dirt and scuffs (Yoichi Murakoshi)
Maintenance Information: 2021.5.15 Operation confirmed
Accessories: Remote control, instruction manual, power cord, adjustment microphone, microphone holder, microphone cable, source box
Main specifications: Two DSPs for 32-bit ultra-fast computational processing MDS Plus conversion method D/A converter W475×H195 × D452mm 20.1kg
The disposal price has been reduced! (Member discount is not applicable) 2022/4/3 sales price 198,000 yen All-stage cascode A grade push-pull configuration preamplifier. A clear, clear tone. The separation of the mid and low frequencies is particularly good, and the resolution of the bass and drums is exceptional. PHONO is compatible with MM. The appearance has threads and dullness. Serial D7X073 (Satoshi Yonejima)
Maintenance information: 2021.5.12 Manufacturer maintained (input switch disassembly contact cleaning. Wrapped Replacement and pattern inspection to improve performance of mica capacitors in each unit amplifier (line, balance, equalizer). Re-solder (Internal inspection cleaning, characteristic check)
Accessories: Copy of instruction manual
Main specifications: Input terminal: PHONO (MM) × 1, RCA × 6, XLR (CD BAL) × 1, TAPE × 2 Output terminal: RCA × 2, XLR × 1 W470 × H145 × D373mm 15.6kg