Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Network players
- Integrated amplifiers
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Cables
- Insulators
- Racks
- Parts
- Tubes
- Manual
- Audio set
- Other audio
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other records
- Other soft
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2022 7/15 Sales price 79,800 yen An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural, deep sound. It is a relatively mild and supple expression for JBL. The exterior has been peeled off in some places, and there are simple repair marks. Serial 27589 31280 (Yamato Yuki) Maintenance Information: 2022.7.15 Operation confirmed Accessories: none Main specifications: 1 inch driver 8 ohm crossover 500 Hz 108 dB diameter 114 x D98 mm weight 4.1 kg
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2022/7/14 Selling price 498,000 yen Maintained by Goto Unit! Rare drivers are in stock. A driver unit for the mid-high range developed based on the know-how of the SG-370BL. It has the same configuration as the SG-370BL, but the diaphragm is made of titanium. The exterior has paint baldness, rust floats, scratches, etc. (Satoshi Yonejima) Maintenance information: 2022.7.13 Manufacturer maintained (edge correction, disassembly inspection, impedance check, edge tension check, diaphragm check, voice coil check, (Equalizer adjustment, readjustment) Accessories: No accessories Main specifications: Driver frequency for medium and high pitches 400 to 20,000 Hz Recommended crossover 500 Hz Impedance 8 Ω Sound pressure 120 dB Titanium diaphragm adopted Compatible with the company's S series horn Permenjoule specification for magnetic circuit
- description
- The price has been reduced. A 1.5-inch ferrite driver from Altec with a sales price of 99,800 yen on 2022 7/13. The American sound is clear and powerful. The wide-area characteristics unique to Altec that are rounded yet stretch quickly resonate comfortably. There is a small scratch on one side of the diaphragm (Oikawa Tetsuji) Maintenance Information: 2022.6.21 Operation confirmed Accessories: none Main specifications: 1.5 inch coaxial unit 8Ω playback frequency band 500-15,000 Hz maximum input 100W 13.8kg
- description
- * Currently sold item. A horn driver that was also mounted on the scepter 120. The sound quality is clear and stretchy, and it is attractive that it is smooth but not too loose. The exterior has dark spots, small scratches, and paint peeling (Hitoshi Kobayashi) Maintenance information: 2022.7.12 Operation confirmed Accessories: none Main specifications: Maximum input 30W (rated 15W) Playback frequency band 700-20,000 Hz Cutoff frequency 500Hz Recommended crossover frequency 700Hz or more Sound pressure level 111dB W297× H121 × D318mm 2.5kg
- description
- Low mid-range 2-inch driver with high power tolerance and high efficiency. It can be used from 300Hz. Phenol impregnated linen is used for the diaphragm, and the sound is a little calmer than the aluminum one (Fujisawa Yukishi) Maintenance information: 2022.7.10 Maintained (diaphragm mounting adjustment, insulation washer, screw, pad damper replacement) Accessories: none Main specifications: 16Ω Sound pressure level 118 dB Frequency characteristics 300 Hz or more Diameter 178 x Depth 136 mm 11.3 kg
- description
- It is inexpensive due to uneven painting and poor external condition. Low mid-range 2-inch driver with high power tolerance and high efficiency. It can be used from 300Hz. Phenol impregnated linen is used for the diaphragm, and the sound is a little calmer than the aluminum one (Fujisawa Yukishi) Maintenance information: 2022.7.10 Maintained (diaphragm mounting adjustment, insulation washer, screw, pad damper replacement) Accessories: none Main specifications: 16Ω Sound pressure level 118 dB Frequency characteristics 300 Hz or more Diameter 178 x Depth 136 mm 11.3 kg
- description
- *1 bottle only Low mid-range 2-inch driver with high power tolerance and high efficiency. It can be used from 300Hz. Phenolic impregnated linen is used for the diaphragm, and the sound is a little calmer than the aluminum one. The exterior is painted, and the paint is peeled off (Oikawa Tetsuji) Maintenance information: 2022.7.10 maintained (diaphragm mounting adjustment Screw, insulating washer, pad damper replacement, DCR (SN unknown/9.2Ω diaphragm no scratch), terminal, internal cable replacement) Accessories: none Main specifications: 16Ω Sound pressure level 118 dB Frequency characteristics 300 Hz or more Diameter 178 x Depth 136 mm 11.3 kg
- description
- Rare mid-low range compression driver unit. The diaphragm diameter is enlarged to 57 mm and a large ring magnet with a 60 mm pie is adopted. The magnetic gap uses high-grade materials such as permenjoules to achieve a profound and clear sound quality. The exterior has floating rust and thread scratches (Satoshi Yonejima) Maintenance info: 2022.7.8 Oscillator check Good Accessories: No accessories Main specifications: Driver frequency for medium tones 80 to 6,000 Hz Recommended crossover 150Hz/4,000 Hz Impedance 8Ω Sound pressure 116dB Titanium diaphragm mylar edge adopted Company B Compatible with series horns 13kg
- description
- The price has been drastically reduced. 2022/7/6 sales price 79,800 yen Maintened*There is a scratch on the serial 12423 diaphragm. Professional 1" Alnico Screwdriver It was also used in the early 4344, and the thick mid-high range with good texture is attractive. The paint color is slightly different on the left and right (Oikawa Tetsuji) Maintenance information: 2022.7.6 maintained (diaphragm installation adjustment. Insulating washer, screw, pad dampener replacement, DCR sn.12423/6.8ohm diaphragm scratch, DCR sn.14153/6.2 ohm diaphragm scratch none) Accessories: none Main specifications: 16 ohms, maximum allowable input, 60 W, frequency band, 800 Hz to 20 kHz, W146 x H146 x D98 mm
- description
- The price has been drastically reduced. 2022/7/6 sales price 79,800 yen Maintened*There is a thin dent in the serial 10952 diaphragm. Professional 1" Alnico Screwdriver It was also used in the early 4344, and the thick mid-high range with good texture is attractive. The paint color is slightly different on the left and right (Oikawa Tetsuji) Maintenance information: 2022.7.6 maintained (diaphragm installation adjustment. Insulating washer, screw, pad dampener replacement, DCR (10952/6.1 ohm diaphragm scratch), DCR (14779/6.3 ohm diaphragm scratch) Accessories: none Main specifications: 16 ohms, maximum allowable input, 60 W, frequency band, 800 Hz to 20 kHz, W146 x H146 x D98 mm
- description
- The price has been reduced! 2022 7/4 sales price 79,800 yen maintenance completed! Representative of JBL's 1-inch driver units. The playback bandwidth is wide, so you can freely change the network cross and enjoy it. Tough neffness, sound pressure, and full mid-high sounds that don't make sense for a bit of input are attractive. The exterior has a feeling of use such as scratches and dullness over time. Serial 6175 6210 (Asane Tomonori) Maintenance information: 2022.7.4 Maintained (vibration field installation adjustment*The diaphragm seems to be compatible with Altec. DCR 6175/6.8Ω diaphragm scratched DCR 6210/6.9Ω diaphragm scratched) Accessories: none Main specifications: 1 inch driver 500-20,000 Hz 16Ω W145 x D97 mm 5.1 kg/book
- description
- Sony's commercial 2-inch screwdriver made during the bubble period. By all means, please play it together with the ghost horn that is in stock at the same time! There is a dent in the net part of the opening, and the speaker terminals are different on the left and right (Oikawa Tetsuji) Maintenance information: 2022.7.2 Operation confirmed Accessories: none Main Specifications: Titanium Diaphragm Crossover Frequency: 500Hz 110dB Compatible Horn: EV HP9040/HP6040, JBL 2360A/2365A/2366A
- description
- TAD treble driver The compression driver technology inherited by ALTEC and JBL is faithfully reproduced with the current precision processing technology. It has a sharp and powerful sound with good sound skipping. The maximum input has been improved to 500W, and sound quality unique to a hard and well-overhanging TAD can be expected (Oikawa Tetsuji) Maintenance information: 2022.7.2 Operation confirmed Accessories: original box, instruction manual Main specifications: Playback frequency band 500 to 22,000 Hz Crossover 800Hz 8Ω Beryllium diaphragm 109dB Triple Slit Rear Type Equalizer Throat 2.54cm W140 ×H140×D110 mm Weight 6.4 kg
- description
- Driver for YL acoustics mid and low frequencies. Playback is possible from 60Hz. If you combine it with a folding horn such as the MB90, you can expect soft and elongated low-frequency reproduction. The deep sound that cannot be produced by a cone-shaped woofer is attractive. There are small scratches, dullness, and paint peeling corresponding to the year (Tetsuji Oikawa) Maintenance information: 2022.6.21 operation confirmed Main specifications: Frequency band 60～3000Hz impedance 16Ω (measured DC value 17.4/17.6Ω) Maximum input 20W
- description
- Rare mid-low frequency driver of YL acoustics It is a rare unit in the world that can play 200Hz or less, which cannot be produced by general drivers. There are scratches, paint peeling, etc. (Oikawa Tetsuji) Maintenance information: 2022.6.21 operation confirmed Accessories: None Main specifications: Driver playback frequency band for medium and low frequencies 100-800Hz Maximum input 40W 8Ω (measured DCR8.6/8.0Ω) 103dB Horn mounting screws: 40mm Titanium diaphragm/magnetic circuit Parmender use diameter 140 × D132 mm 7.2 kg
- description
- This is a super popular YL acoustic driver D-55000. The sense of density and omission in the midrange is reminiscent of a field-type tone. There are small scratches and paint peeling on the whole (Tetsuji Oikawa) Maintenance information: 2022.6.21 operation confirmed Accessories: None Main specifications: driver for medium tone Playback frequency 150～7,000Hz 8Ω (measured DC resistance 9.1Ω/9.8Ω) Output sound pressure level 102dB/W/m Titanium diaphragm 140ΦXD118mm 6.3 kg/book
- description
- The price has been reduced! 2022/6/16 sales price 89,800 yen maintained! Popular 1 inch screwdriver It is a familiar model from A7, MODEL19, etc. The mid-high range, which is light and easy to remove, is unique to ALTEC. You can experience a clear American sound. The exterior has a rust float (Satoshi Yonejima) Maintenance Information: 2022.6.16 Maintained (distortion repair, lead wire repair. (Inspection and testing of each part OK) Accessories: No accessories Main specifications: Alnico magnet frequency band 1,200Hz to 20,000Hz recommended crossover 1,200Hz 114×94mm 3.2kg
- description
- Comes with an original box! A driver for middle and treble sounds from Coral that boasts a strong popularity. You can enjoy the delicate tone that seems to be made in Japan. In addition, it is possible to attach it to a 1-inch horn made by JBL without using an adapter etc. There are no noticeable scratches (Sasaki Shota) Maintenance Information: 2022.5.29 Operation confirmed Accessories: original box Main specifications: Throat diameter 25.4 mm (1 inch) Playback frequency band 500 to 18,000 Hz Impedance 8Ω Maximum input 150W Sound pressure 105 dB W116 × H116 × D104 mm 4.2 kg/book
- description
- TAD's popular 2-inch driver that allows you to enjoy a powerful sense of energy in the exhilarating high range and the sound field that spreads naturally. You can enjoy precise vocals and sharp tones with beryllium diaphragm and expensive alnico magnet. The appearance has a lot of rust, scratches and dullness. Serial 1G7037/1G7068 (Yoichi Murakoshi) Maintenance information: 2022.5.29 sound confirmed Accessories: mounting screws Main specifications: Mid-high frequency driver Beryllium diaphragm aperture 49.2 mm 600 to 20,000 Hz Recommended crossover frequency 600 Hz Alnico magnet impedance 16 Ω efficiency 110dB W178×H178×D156mm 12.6kg
- description
- The price has been drastically reduced. 2022/5/28 selling price 79,800 yen. JBL professional 2" screwdriver It is an item that continues to be used even now in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat of the drum, the outstanding reality is attractive no matter which one you take. Serial 41101/82734 The exterior has some dullness, scratches, and paint peeling (Yoichi Murakoshi) Maintenance information: 2022.5.8 Sound output confirmed Accessories: mounting screws Main specifications: Measured impedance 82734 side 12ω/41101 side 14Ω throat diameter 5cm allowable input 100W sound pressure level 111dB/W/m frequency characteristic 500Hz to 20kHz Crossover frequency 500Hz or more 16Ω Diameter 235 x Depth 132 mm 13.6 kg/1 bottle
- description
- The specifications of the left and right SP terminals are different, and there is no emblem on one side, so it is inexpensive. A compression driver also adopted in the S9500. The combination of a titanium diaphragm and a neodymium magnet is characterized by a sound with a sense of speed with good response (Yoichi Murakoshi) Maintenance information: Sound has been confirmed Accessories: mounting screws Main specifications: Allowable input 150W 500Hz to 20kHz Crossover frequency 500Hz Diameter 168×Depth 142mm 4.8kg/actual measured impedance 12/18Ω
Manufacture:YL音響
Price: JPY 134,545(pair)Sold Out
- description
- Driver for YL acoustics mid and low frequencies. Playback is possible from 60Hz. If you combine it with a folding horn such as the MB90, you can expect soft and elongated low-frequency reproduction. The deep sound that cannot be produced by a cone-shaped woofer is attractive. There is dullness appropriate to the age (Yoichi Murakoshi) Maintenance information: 2022.4.1 sound confirmed Accessories: None Main specifications: Frequency band 60 ~ 3000 Hz impedance 16Ω (measured DC value 17.4/17.6Ω) Maximum input 20W approx. 8kg (wooden box)
Manufacture:Great Plains Audio
Price: JPY 45,273(pair)Sold Out
- description
- GPA (Great Plains Audio) is a manufacturer that took over ALTEC's production facilities and currently maintains ALTEC units. A 1-inch throat driver unit that employs a PASCALITE diaphragm. It is a driver that is also used in the late A7. The PASCALITE structure diaphragm assembly developed in 299 is adopted, and a high-heat-resistant voice coil bobbin of aramid fiber is adopted for the voice coil, for long-term high-power operation It is supported (Oikawa Tetsuji) Maintenance Information: 2022.5.16 Operation confirmed Accessories: none Main specifications: 1 inch driver Frequency characteristic 500Hz to 20kHz Output sound pressure level 108dB Impedance 8Ω External dimensions Diameter 140 ✕ Depth 69mm Weight 2.9kg
- description
- 1.5" ferrite driver from Altec A clear and powerful American sound in the chest. The wide-area characteristic that stretches smoothly while being rounded unique to Artec resonates comfortably. Both diaphragms are logoed. The appearance may be scratched and paint peeling. (Kimiya Miura) Maintenance Information: 2022.5.10 Operation confirmed Accessories: No accessories Main specifications: 1.5 inch coaxial unit 8Ω playback frequency band 500 ~ 15,000 Hz maximum input 100 W 13.8 kg
- description
- The 8Ω specification of 288 with few arrivals. The horn sound, which gives a sense of overhang and thick energy, is attractive. Since it is 8Ω, it can also be combined with woofers of other companies (Yoichi Murakoshi) Maintenance Information: 2022.4.30 Maintenance (cleaning center adjustment in the magnetic circuit gap, terminal contact cleaning.) Accessories: None Main specifications: Frequency band 500Hz to 15kHz Maximum input 60W 111dB Impedance 8Ω (measured DC value 5.1Ω/5.4Ω) Appropriate crossover 500Hz or more Diameter 179×D148mm 13.3 kg
- description
- The disposal price has been reduced. Member discounts are not applicable. 2022/5/1 selling price 148,000 yen. It's been maintained! 16Ω!! BLUE FRAME!!! Comes with horn H91!!!! Representative of 1 inch driver units. Since the playback band is wide, you can freely change the network cross and enjoy it. The toughness, sound pressure feeling, and fulfilling mid and high tones that are uncommon to some input are attractive. Maintenance Information: 2022.4.29 Maintenance (cleaning center adjustment in the magnetic circuit gap, terminal contact cleaning.) Accessories: None Main specifications: 16Ω 500-20,000 Hz W145 × D97 mm 5.1kg/book (LE85) directional characteristic 90° (horizontal) /45° (vertical) throat diameter 2.5cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1 bottle (H91)
- description
- It's cheap because it's in poor condition. A high-efficiency driver unit adopted in the A7-500, etc. Further broadband playback is possible by combining it with the 511B sectoral horn. One terminal on one side has been replaced (Kanai Hidetsugu) Maintenance information: 2022.4.28 sound confirmed Accessories: None Main specifications: Alnico 8Ω Allowable input 50W 105dB Frequency characteristic 500Hz to 20kHz W114 × H114 × D94 mm 3.0 kg
Manufacture:ALTEC
Price: JPY 361,818(pair)Sold Out
- description
- Miraculous condition with beautiful goods! A vintage driver from Artec from the 1950s. It has a very strong sense of energy, but it has a unique ear-feel. If you have an early Altec system in Yonematsu, please take this opportunity! Serial 6182 6184 (Yoichi Murakoshi) Maintenance information: 2022.4.24 sound output confirmed Accessories: None Main Specifications: Frequency Characteristics 500Hz ~ 12,000 Hz Impedance 24Ω Sensitivity 115.2dB Allowable Input 40W Recommendation Network N-500-C Recommended Crossover 500Hz Recommended Horn H150/H804/1005B Diameter 165 × 12.4 mm Weight 9kg
Manufacture:ALTEC
Price: JPY 207,273(pair)Sold Out
- description
- A 1.5-inch driver that is famous for being built into the A5 system. It is characterized by the thickness of the mid-high range and the approaching sound. It makes me feel the good strength of a tightly packed atrium. Considering the year, it's in pretty good condition (Yoichi Murakoshi) Maintenance information: 2022.4.22 sound output confirmed Main specifications: throat diameter 1.5 inches Frequency characteristics 500 ~ 16000 Hz Impedance 24Ω Sound pressure 115dB Allowable input 40W Recommendation network N500C recommendation horn H1505/H804 Size Diameter 165 x 124 mm Weight 9.0 kg
- description
- The price has been reduced. 2022/4/11 sales price 198,000 yen. TAD treble driver The compression driver technology inherited by ALTEC and JBL is faithfully reproduced with the current precision processing technology. The sound skips well, and it's a powerful sound with sharpness. The maximum input has been improved to 500W, and the sound quality unique to TAD with good overhang can be expected (Yoichi Murakoshi) Maintenance information: 2022.4.2 sound output confirmed Accessories: None Main Specifications: Playback Frequency Band 500 ~ 22,000 Hz Crossover 800Hz 8Ω Beryllium Diaphragm 109dB Triple Slit Rear Type Equalizer Slow 2.54cm W140 × H140 × D110 mm Weight 6.4 kg
- description
- A rare item! Gauss large magnet 2" screwdriver The density of the mid-high range, which is a bit different from ALTEC and JBL drivers, is a masterpiece. The condensed sound and extruded mid-range go great with rock and jazz-making! There are dullness and small scratches (Sasaki Shota) Maintenance information: 2022.4.4 sweep test good, diaphragm OK Accessories: Nothing Main specifications: Aperture 2 inches Throat diameter 4.83 cm 16 Ω Maximum input 40 W Output sound pressure level 110.5 dB Frequency band 500 ~ 13,000 Hz Magnetic flux density 18,000 Gauss weight 15.8 kg
- description
- This is a driver for the middle sound of the YL Acoustic Laboratory. It can be renewed from 100Hz, and low-frequency reproduction with soft and elongated ferrite magnets can be expected. The deep sound unique to YL acoustics is attractive. Is there dullness and rust floating (Sasaki Shota) Maintenance information: 2022.4.4 sweep test good Accessories: Nothing Main specifications: Playback frequency band 100Hz to 7kHz 8Ω Maximum input 20W 125φ×120mm 4.8kg
- description
- The price has been reduced. 2022/4/3 sales price 60,000 yen mid-range driver 2470. Although it is 1 inch, it is a driver that can come out at 500 Hz, and it resonates with a very supple and good expression. The screw on the lid is crushed and I can't open it. Serial 6544 6521 (Takasaki Atsushi) Maintenance information: 2022.4.3 sound output confirmed Accessories: none Main specifications: playback frequency band 500 to 12,000 Hz recommended crossover 500 Hz 16 ohms maximum input 50 W 117 dB slot diameter 2.5 cm
- description
- A compression driver unit for high frequencies with a throat diameter of 1 inch (25.4 mm) using a pure titanium diaphragm. With the sharpness and figure thickness unique to JBL for business use, it stretches to the top with good response. There are no noticeable scratches or stains (Sasaki Shota) Maintenance information: 2022.3.29 operation confirmed Accessories: None Main specifications: Titanium diaphragm frequency band 800 to 20kHz 110dB crossover 800Hz or more 16Ω (measured DC resistance 3.5Ω/3.5Ω) W147 × H147 × D105mm 4.3 kg
- description
- The price has been drastically reduced! 2022/3/24 Sales price 79,800 yen JBL's professional 2-inch screwdriver. It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms, the breath of the vocals and the hi-hat on the drums, are attractive with outstanding reality. There are some dullness, scratches, and paint peeling on the exterior. Serial 76852/76866 (Eiji Tamura) Maintenance information: 2022.3.24 Oscillator check OK Accessories: No accessories Main specifications: Throat diameter 5cm Allowable input 100W Sound pressure level 111dB/W/m Frequency characteristic 500Hz to 20kHz Crossover frequency 500Hz or more 16Ω Diameter 235 × Depth 132mm 13.6 kg/1 bottle
Manufacture:YL音響
Price: JPY 63,455(only one piece)Sold Out
- description
- * Currently sold items. Only one Compression driver for YL acoustics It will be the same oral sutra as Western's 555. It has a deep sound typical of the company, and it sounds thick without exaggeration. You can get a sound with a high sense of transparency due to its precision. There is overall paint baldness and dullness, and deterioration due to rust in the opening (Yoichi Murakoshi) Maintenance information: 2022.3.11 sound output confirmed Accessories: None Main specifications: 16Ω 20W diameter 110 × depth 118 mm
- description
- The price has been reduced! 2022/3/17 sales price 79,800 yen maintained! A representative of JBL's 1-inch driver unit. Since the playback band is wide, you can freely change the network cross and enjoy it. The toughness, sound pressure feeling, and fulfilling mid and high tones that are uncommon to some input are attractive. The appearance has a feeling of use such as aging scratches, dullness, etc. Serial 40215 44698 (Hiroki Aso) Maintenance Information: 2022.3.17 Maintained (Vibration plate mounting adjustment (The vibrating plate has D16R421.) Parts Replacement DCR (40215/6.5ohm Vibration Plate No Scratch) DCR (44698/6.5ohm No Vibration Plate Scratch) Sound Out Checked) Accessories: None Main specifications: 1 inch driver 500-20,000 Hz 8Ω W145 × D97 mm 5.1 kg/book
- description
- A popular 1-inch driver installed in A7 and MODEL19! The mid-high range, which is easy to lose and light, is unique to ALTEC. You can experience a clear American sound. There are small scratches and dullness (Hitoshi Kobayashi) Maintenance information: 2022.3.14 Maintenance completed (half-disconnection and terminal looseness correction) Accessories: None Main specifications: Alnico magnet frequency band 1200Hz to 20000Hz Recommended crossover 1200Hz 114×94mm 3.2kg DC resistance 02680 6Ω/05257 7Ω (actual measurement )
- description
- The price has been drastically reduced. 2022/2/25 Sales price 650,000 yen A huge driver of Yale Acoustics! It is 7550DE for medium and high tones. A famous machine that combines an overwhelming amount of information and a lustrous tone. It is a driver who is still popular with enthusiasts. There are some small scratches (Yoichi Murakoshi) Maintenance information: 2022.2.25 sound output confirmed Accessories: none Main specifications: Impedance 8 Ω, playback frequency band 100 to 10,000 Hz, outer diameter 160 × depth 170 mm, weight 23 kg
- description
- The price has been drastically reduced! 2022/2/12 selling price 79,800 yen JBL professional 2-inch screwdriver. It is an item that continues to be used even now in large horn systems, etc. With the quality unique to titanium diaphragms, vocal breathing, drum hi-hats, etc., the outstanding reality is attractive. The appearance has a feeling of use such as scratches and dullness. Serial 87238 87258 (Asaine Tomoho) Maintenance Information: 2022.2.12 Operation confirmed Accessories: None Main specifications: Throat diameter 5cm Allowable input 100W Sound pressure level 111dB/W/m Frequency characteristic 500Hz to 20kHz Crossover frequency 500Hz or more 16Ω Diameter 235×Depth 132mm 13.6 kg/1 bottle
- description
- The price has been drastically reduced! 2022/2/1 selling price 178,000 yen JBL's 2-inch screwdriver, professional model. A driver that is thick but also good at expressing delicate touches. There is only 2 inches, and the sound pressure sensation in the middle range is outstanding. There are paint peeling and small scratches on the exterior (Satoshi Yoneshima) Maintenance Information: 2022.2.1 Maintained (Replace 28 screws, insulation washer, pat dampener replaced. (Diaphragm mounting adjustment) Accessories: No accessories Key Specifications: 2" Driver Alnico Magnet 16Ω 500Hz to 18,000 Hz Recommended Crossover Frequency 500Hz Diameter 178 x Depth 137mm Weight 11.3kg
- description
- The price has been reduced! 2021/12/28 Sales price 79,800 yen Maintained! A representative of JBL's 1-inch driver unit. Since the playback bandwidth is wide, you can freely change the network cross and enjoy it. The toughness, the sound pressure feeling, and the middle and high tones that are full of stuffiness are attractive. There is a feeling of use such as aged scratches and dullness. Serial 36371 36177 (Yamato Yuki) Maintenance information: 2021.12.28 Maintained (Diaphragm Mounting Adjustment (Insulation washer, screw, pad dampener replacement operation confirmed) Accessories: none Main specifications: 1 inch screwdriver 500-20,000 Hz 8Ω W145×D97mm 5.1kg/book
- description
- The price has been reduced! 2021/12/23 selling price 79,800 yen A high-efficiency driver unit adopted for A7-500, etc. Further broadband playback is possible by combining it with the 511B sectoral horn. The appearance is dull, etc., but it is a beautiful individual for the age. Serial 2615/2649 (Satoshi Yonejima) Maintenance information: 2021.12.23 oscillator test good Accessories: No accessories Main specifications: Alnico 8Ω Allowable input 50W 105dB Frequency characteristics 500Hz to 20kHz W114 × H114 × D94mm 3.0kg
- description
- The price has been reduced. 2021/12/22 sales price 99,800 yen ※The diaphragm is a compatible product and the impedance seems to be 8 ohms, so it's cheap. A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals are played with a sound that makes you think of jazz. There are paint peeling, small scratches, etc. (Oikawa Tetsuji) Maintenance information: 2021.12.22 operation confirmed 2020.1.24 Maintained (partial rework adjustment due to diaphragm damage. Insulating washer, pad dampener, screw replacement. (*The diaphragm is a compatible product and the impedance seems to be 8 ohms) Accessories: none Main specifications: frequency characteristics 500 to 18 kHz crossover 500 Hz 16 ohms diameter 175 mm height 145 mm approx. 11.8 kg/book
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
