A tube type mono dedicated phono equalizer that employs a NO NFB circuit. Supports various SP and monaural LP playback by switching the cartridge impedance HIGH, MID, LOW three stages and the turnover+roll-off adjustment knob. There are two RCA pins on the input and output, but it is a mono 2 system. The fresh and refreshing sound is attractive (Yoichi Murakoshi)
Maintenance information: 2021.12.11 sound output confirmed
Accessories: power cable
Main specifications: Input/output monaural 2 system turnover 12 stages, roll-off 8 stages switching W400 × H110 × D310mm 10.9 kg
Luxman's phono equalizer was once called “one of Japan's top three phono eocos.” PC0CC is used as the transformer wire, and I feel the spirit of the long-established Lux store. The center of gravity is low, and the sound is glossy with thick, thick contours. There is a slight abrasion on the top surface (Murakoshi Yoichi)
Maintenance information: 2023.6.11 sound output confirmed
Accessories: original box
Main specifications: input level/impedance, MC LOW 0.07 mV/35 ohm, MC MID 0.2 mV/300 ohm, MM 2.5 mV/47 kΩ output level/impedance, 0.3 mV/20 Ω gain, MC LOW 73 dB, MC MID/64 dB, mm 42 dB with input balance/unbalance switching SW, W440 x H120 x D399 mm, weight 12 kg
We have drastically reduced the price! 2021/10/3 Selling price 378,000 yen The company's flagship control C-3800 eliminated the back slot and was announced as a standalone machine. It is easy to handle from impedance adjustment to GAIN adjustment, MM/MC switching on the front panel, and is finished to create a thick and supple sound. There are no noticeable scratches on the appearance. Serial L8Y039 (Kimiya Miura)
Maintenance information: 2021.10.3 operation confirmed
Accessories: instruction manual, power cable, cross
Main specifications: MM/MC compatible phono equalizer independent amplifier configuration dedicated to MM/MC Input impedance mm1kΩ, 47kΩ, 100kΩ/MC3Ω, 10Ω, 30Ω, 100Ω, 300Ω, 1KΩ W465×H121×D405mm 14.5kg
* The power supply is designed to be supplied from the company's Coherence and Synergy power supply, so standalone use is not possible. A very tough phono equalizer with only balanced terminals for both input and output. I have the impression that this is a gorgeous and sensual Jeff Rowland analog tune. In addition to abrasions on the exterior and top plate, there is a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information:2023.8.25 sound output confirmed
Accessories: connecting cable, original box
Main specifications: gain LO64dB, HI74dB W445 × H80 × D152 mm 11 kg
Genuine Stellar Very rare US KAB MM/MC compatible PHONO equalizer The biggest feature is the installation of all 11 types of equalizing curves such as RIAA, NAB, EAS, FFRR, etc., and can be as close as possible to the sound intended by the maker of the first LP board such as the SP board. The appearance is good without noticeable scratches. Serial EQS080501 (Satoshi Yoneshima)
Maintenance information: 2021.12.2 operation confirmed
Accessories: instruction manual, power supply
Main specifications: Input terminal: 2 system output terminal: 2 systems (RCA XLR PHONE) W483 × H44 × D208mm Weight 2.2 kg (body part)
Phonoi-collizer using ALTEC A428B and power supply P522B · P523B. It is a good thick sound that looks like ALTEC, and compatibility with jazzs on the west coast is exactly the best match. It is possible to switch MM/MC by switching the A428B throttle out the internal SW. Appearance, there are stains and scratches. (Eiji Tamura)
Maintenance Information: 2021.3.21 Maintenance (Attenuator Volume Internal Resolved. Added RCAJack as input terminal for MM and MC, output terminal is changed to RCA terminal. Added MM and MC switching switch in the unit. Vacuum Tube 6072 (Electro-Harmonix) ✕ 4 Replacement Unit connection connector ✕ 5, connecting cable exchange, wiring change around ground treatment to improve residual noise. Degraded coupling capacitor exchange, heater circuit diode. Sound out test was carried out. (* Balance will be unwired)
Accessories: Attache case
Main Specifications: Gain: 29dB (1kHz · mm) 50dB (1KHz · MC) Input impedance: mm43kΩ/MC250Ω Output Impedance 600Ω W530 ✕ H210 ✕ D330mm Weight 23.6 kg
Hi-Fi Hall is in stock for the first time! A KRELL phono equalizer amplifier designed on the assumption that it will be used in combination with the company's KBL preamp. The load resistance can be switched in 9 stages, making it possible to test various settings. Enjoy the sharp, thick sound typical of KRELL (Ryo Mizusaki)
Maintenance information: 2023.11.20 operation confirmed
Accessories: power cord, power supply unit, connection cord
Main specifications: gain MC67dB mm46dB input impedance 47.5kΩ 1kΩ 825Ω 475Ω 250Ω 100Ω 47.5Ω 25.5Ω 10Ω output impedance 20Ω RIAA deviation within 0.1 dB input 2 systems output 1 system power consumption 45 W external dimensions W485 x H65 x D364 mm weight 6.9 kg
Disposal Markdown. Member price is not applicable. 2021.4.11 Selling price 378,000 yen The company's flagship control C-3800 eliminated the rear slot and announced as a single machine domestically produced whole phono collaborator. It is finished with ease of handling that can be done from impedance adjustment to GAIN adjustment, MM/MC switching on the front panel, and creating a bone and supple sound. Appearance is top plate, front panel top drag scratches (Oikawa Tetsuji)
Maintenance Information: 2021.4.11 Operation confirmed
2020.2.18 Manufacturer Maintenance (Exchangeable parts for damage to load in piece switch, pressure resistance check OK)
Accessories: instruction manual, power cable, connection cable
Main Specifications: MM/MC compatible phono collizer Independent amplifier configuration dedicated to MM/MC Input impedance mm1kΩ, 47kΩ, 100kΩ/MC3Ω, 10Ω, 30Ω, 100Ω, 300 Ω, 1KΩ W465 × H121 × D405mm 14.5kg
The price has been drastically reduced. 2021/12/11 selling price 298,000 yen Stellar genuine product. A very rare MM/MC compatible PHONO equalizer from KAB in the United States. The biggest feature is the installation of 11 types of equalizing curves such as RIAA, NAB, EAS, and FFRR, etc., and it is possible to get as close as possible to the sound intended by the creator of the first LP board such as the SP board. Serial EQS080501 (Itsuro Mizushima)
Maintenance information: 2021.12.11 operation confirmed
Accessories: Instruction manual, power cable
Main specifications: Input terminal: 2 system Output terminal: 2 system (RCA XLR PHONE) W483 × H44 × D208mm Weight 2.2 kg (body part)
A phono equalizer dedicated to Uesugi's MM. The sound sounds fresh and glossy. This is dedicated to MM, so a separate step-up transformer is required when using MC cartridges. The exterior has paint peeling on the top plate of the power supply part, and there are abrasions, wire scratches, etc. on the cabinet of the main unit (Yoichi Murakoshi)
Maintenance information: 2022.3.23 sound output confirmed
Accessories: None
Main specifications: input impedance 2mV/47kΩ output/load impedance 0.2mV/600Ω used vacuum tube ECC83/12AX7 × 4 body part: W375 × H146 × D360mm weight 7kg Power supply part: W115 × H98 × D200mm Weight 3kg