Line matching transparent pair sold primary: 600 ohms, output 10 dBm, frequency range 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, is Tamura's OEM specification (Yosuke Kojima)
Accessories: none
Power transformer primary: 100-110V Secondary: 40V/50mA 6.3V/3.5A × 2 6.3 V/1.2A × 2 10-115-135-115V/AC0.9 A W120 × H72 × D104 mm approx. 4.2 kg (actual measurement, not including protrusions) There are places where some terminals have come off (there is no problem with conduction) There are paint peeling and scratches in places (Yosuke Kojima)
Accessories: none
Choke transformer 15H/150mA DC resistance 155 ohms (actual measurement 157.8 ohms) W84 x H105 x D75 mm 2.3 kg with original box, some paint is peeled off, and there are scratches (Kojima Yosuke)
Accessories: original box
AC100V/0.6A 15V/1.5A 5V/2A 6.3V/1A 260V/35mA Center Tap Rectifier W95 x D95 x H64 mm 1.84 kg for Power Transformer Tube Preamp Some of the drawer lines with the original box are short, and there is some rust on the main body (Kojima Yosuke)
Accessories: original box
Choke transformer 5H/120mA (maximum 160 mA) DC resistance 155 ohms (actual measurement 158.7 ohms) W54 x H80 x D69 mm 0.7 kg/piece Rubbed against the nameplate, and the printing has disappeared (Kojima Yosuke)
Accessories: none
Input transparent pair sales primary: 600 ohms secondary: 60 kΩ boost ratio 1:10 W 25 x D43 mm approx. 70 g/piece There is overall dullness (Kojima Yosuke)
Accessories: none
Choke transformer 10H/200mA DC resistance 95Ω (actual measurement 95.5Ω) W83 x 109 x D75 mm 2.4 kg There are hits and scratches and paint peeling in places on the main body (Kojima Yosuke)
Accessories: none
Output transparent pair for push-pull, output 10W, primary: 8kΩ, secondary: 4-8-16 ohms, W62 x H89 x D63 mm, approx. 1 kg/piece, paint is peeled off, and there are scratches (Kojima Yosuke)
Accessories: none
Input transparent pair sales Permalloy core primary allowable DC current 60 mA (for 2 primary PPs), 1.5 mA (unbalance) transformation ratio 1+1:2+2 primary impedance 7 kΩ primary impedance 170 H (5 V/50 Hz) driver tube example 6SN7, 76, 6350, ECC81, etc. (primary single), 6V6, 6F6, etc. (primary push-pull) W50 x H80 x D86 mm approx. 0.8 kg/piece on the edge of the mounting surface There is rust on it, and there are scratches in places. Copy of instruction manual, TANGO badge included ※nameplate not attached (Kojima Yosuke)
Accessories: copy of instruction manual, TANGO badge (unused)
Power transformer primary: 100V secondary: 370-400V/AC0.6A, double voltage DC160mA 150-0-150V/60mA 10V/5A × 2 6.3 V/2A × 2 W125 × H140 × D125 mm approx. 8.9 kg (actual measurement, not including protrusions) Rust floats on the mounting surface side, and there is discoloration on the entire coating film (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-110V secondary: 6.3V-1A × 2 12.6-6.3/1A 270V/50mA W83 × H57 × D70 mm 1.4 kg There is rust mainly on the sides (Yosuke Kojima)
Accessories: none
※It is inexpensive because the lead wire on the coil side is broken in 1 place (the lead wire on the coil side is conductive) Power transformer primary: 90-100-110V secondary: 6.3 V/1A x 2 6.3 V/3A (with CT) 6.3 V/3A 5V/4A 385-340-0-50-340-385 V/20 mA Usage: 6CA7, 6GB8 push-pull, etc. W121 x H133 x D101 mm 6.1 kg (actual measurement, including protrusions) There are thin rust scuffs in places in places (Kojima Yosuke)
Accessories: none
※Only 1 output transformer push-pull output 10W primary: 8 kΩ secondary:: 4-8-16 ohms
W75 x H98 x D78 mm 1.54 kg (actual measurement, not including protrusions) There are abrasions and paint peeling (Kojima Yosuke)
Accessories: none
Line matching transparent pair sales primary side: 600 ohm CT (150 split) secondary side: 20 kωCT (5k split) W77 x H71 x D43 mm 0.54 kg/piece (actual measurement, not including protrusions) One side with the original box seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: original box
Power transformer primary: 85-100-110V secondary: 5V/3A 6.3V-CT/3A 6.3V/3A 2.5V-CT/6A 380-0-280-380V/DC120mA W108 × H74 × D94 mm 3.2 kg (actual measurement, not including protrusions) There are abrasions and paint peeling (Kojima Yosuke)
Accessories: none
Power transformer silver hammer tone primary: 100V secondary: 6.3-5 V/2A x 3 280-240-200-0-200-240-280V/DC0.1 A W92 x H68 x D78 mm approx. 2 kg/piece (measured not including protrusions) (Kojima Yosuke)
Accessories: none
Vacuum tube socket pair sold A small UV socket with the same rotating-fixed mechanism as the 845 and 211 sockets. Can be used for 300B, 2A3, etc. Comes with fixing screws (Yosuke Kojima)
Accessories: fixing screws
* Some terminals are missing, and there is a lot of repainting and paint peeling, so it's inexpensive. Power transformer primary: 100V secondary: 530-400-250-0-250-400-530V/0.15A 5V/3A x 2 6.3 V/3A 7.5 V/4.5 A x 2 W120 x D113 x H120 mm (max) 5.24 kg (Kojima Yosuke)
Accessories: none
It seems to be a set of 2 choke transformers, but the details are unknown. W31H95 x 44 mm 0.32 kg/piece (actual measurement, protrusions not included) Only conduction by the tester has been confirmed (Kojima Yosuke)
Accessories: none
It seems to be a set of 2 choke transformers, but the details are unknown. W31H95 x 44 mm 0.32 kg/piece (actual measurement, protrusions not included) Only conduction by the tester has been confirmed (Kojima Yosuke)
Accessories: none
Power transformer silver hammer tone primary: 100V secondary: 6.3-5 V/2A x 3 280-240-200-0-200-240-280V/DC0.1 A W92 x H68 x D78 mm approx. 2 kg/piece (measured not including protrusions) (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: CT-7.5V/1.5A × 4 CT-12.6V/2A 190-200-210V/AC1A W122 × H103 × D104 mm 5.8 kg (actual measurement, not including protrusions) Similar to a transformer made by Noguchi from the design, but details are unknown (Kojima Yosuke)
Choke transformer 5H/230mA maximum 380 mA W85 x H96 x D96 mm 2.6 kg (actual measurement, not including protrusions) There are scuffs, bumps, and paint peeling in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-110V secondary: 6.3 V/2A × 2 6.3 V/3A × 2 40 V/30mA 10-135-155-175V/0.73 A W120 × H127 × D100 mm 5.0 kg (actual measurement, including protrusions) with original box (there is a lot of damage to the outer box, but there is no problem with the inner cushioning material) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: original box
* Since the terminal board is cracked and bent, it is inexpensive. Power transformer primary: 90-100-110V secondary: C.T-6.3/3A x 2 5-6.3V/3A 350-310-0-40-310-350V/20mA W100 x H125 x D84 mm approx. 3.8 kg (actual measurement) rust floats and paint peels off a lot (Kojima Yosuke)
Accessories: none
Choke transformer 10H/180mA measured DCR166.6Ω W94 x H66 x D62 mm approx. 0.8 kg with original box, paint is peeled off, and there is a bend in the stay part (Kojima Yosuke)
Accessories: original box
How about a set of 2 air core coils of 3.30 mH for a self-made network, etc.? (TAMURA Eiji)
Maintenance information: 2023.9.13 Conductivity confirmed
Accessories: original box
How about a set of 2 air core coils of 3.00 mH for a self-made network, etc.? (TAMURA Eiji)
Maintenance information: 2023.9.13 Conductivity confirmed
Accessories: original box
An Acrotech balance connector that uses an XLR plug (male) pair Neutrick balanced 3-pin type connector. Easy assembly is achieved with a minimum number of components. The pins are gold-plated. There are no solder marks on the terminals and it is generally good (Murakoshi Yoichi)
Maintenance Information: 23.8.14
Accessories: none
Power transformer primary: 100-110V secondary: 6.3V/5A 6.3V/2A x 2 6.3V-CT/3A 270-0-250-270V/130mA W100 x H72 x D87 mm approx. 2.6 kg (actual measurement, not including protrusions) There is a lot of paint peeling due to rust floating (Kojima Yosuke)
Accessories: none
Choke transformer 10H/maximum 300mA DC resistance 81 ohms (actual measurement 80 ohms) W68 x H82 x D79 mm approx. 1.5 kg (actual measurement, not including protrusions) with original box, good appearance (Kojima Yosuke)
Accessories: original box
Power supply transformer input 100V output A power source: 6.3V/1A B power supply: 260V/30mA (with CT) 15,17V/2A (bridge only) W85 x H57 x D70 mm approx. 1.5 kg (actual measurement, not including protrusions) There are abrasions and blows (Kojima Yosuke)
Accessories: none
Power transformer primary: 90V/100V/110V secondary: 450-380-380-450V/DC220mA 15V/0.3A 12.6V/0.3A 6.3V/6A 5V/3A W134 × H98 × D112 mm approx. 6.5 kg (actual measurement, not including protrusions) There are abrasions and paint peeling in places (Yosuke Kojima)