Current flagship aircraft! The circuit has been renewed from the previous D-08u, and the DAC is equipped with a ROHM high sound quality audio DAC and the analog circuit is equipped with an ODNF-U in a fully balanced configuration. Playback of MQA (MQA-CD/MQA files) is also fully decoded. The resolution, sound field, etc. make me listen to the dignity unique to the highest-end aircraft. The exterior is generally good with no noticeable scratches. Serial M20900311C (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: remote control instruction manual copy power cable original box
Main specifications: Compatible discs: SACD, CD digital input: USB x 1 system, COAX x 1 system, OPT x 2 system Digital output: COAX x 1 system, OPT x 1 system Compatible sampling frequency: USB input (PCM) 44.1k to 768 kHz (16, 24, 32 bits) /USB input (DSD) 2.8 m to 22.4 MHz (1 bit) /USB input (MQA) 44.1K/48 kHz (24 bit), (MQA) Dollar mode) 88.2 K/96 kHz (24 bits) /COAX/OPT input 44.1 k to 192 kHz (16, 20, 24 bits)
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources. There is a feeling of use on the exterior, such as minor corrosion and dullness (Kanai Hidetsugu)
Maintenance information: 2024.5.21 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. There are no visible scratches on the exterior, etc., and it is good with a slight dullness from the age (Kobayashi Hitoshi)
Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK)
Accessories: copy of instruction manual
Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
Fully maintained! The 38 series is the most popular 38FD. It has a warm tone with a warm tone, and there is plenty of warmth in the bass and mids, so you can enjoy the true essence of lackstone where you can enjoy the afterglow of the tone. There is slight rust on the back, but there are no major scratches other than that (Oikawa Tetsuji)
Maintenance information: 2024.5.22 maintained (solder correction, input/output waveform confirmation, load test (1kHz sine wave, at 8Ω load: 27W+27W), sound output test)
2023.12.17 Maintained (oil capacitor, block capacitor, electrolytic capacitor, film capacitor, fixed resistor, rectifier diode, DIN terminal, power supply SW, monitor SW, master VR, balance VR, rear panel VR, VR, rear panel VR replacement, RCA terminal polishing, lever SW disassembly and cleaning and application of grease to prevent oxidation and sulfation, replacement of 2 vacuum tube main parts, 50CA10 replacement, cabinet exterior repair/polishing/oil finish, input/output waveform Check, check for residual noise,
Load test (1 kHz sine wave, 27W+27W at 8 ohm load), sound output test)
Accessories: power cable, instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Luxpremain entry model. You can enjoy solid LUXMAN sound at an affordable price. We recommend combining it with European speakers that are glossy, soft, and have a good tone. The exterior is dull and there are abrasions and small scratches on the top plate. Serial M90410348A (Yonejima Satoshi)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) line input 4 systems (RCA x 4, XLR x 1), 1 phono system (MM), 2 tape systems W467 x H151 x D439 mm 13 kg
The price has been drastically reduced. 2024/5/19 sales price 158,000 yen Maintained. The Lux tubular premium FM/AM tuner WZ-30 was developed with the aim of being the ultimate FM stereo tuner. With the warm and thick sound quality typical of a tube ball, you can enjoy broadcasting in a relaxed atmosphere. The circle of the manufacturer logo on the front is off (Oikawa Tetsuji)
Maintenance information: 2024.5.19 Maintained (2 STEREO/MONO switching relays unstable replacement, 1 μF defective and deterioration replacement, 3 FM sensitivity improvement measures → vacuum tube 6CW4 replacement 3 (using supplies) · Noise improvement measures → 2 additional 0.002 μF Mylar capacitors · FM and AM circuit IF/RF/MPX re-adjustment
(*Operation has also been checked with AC 100V)
Accessories: copy of instruction manual
Main specifications: tubular FM/AM tuner W470 x H175 x D275 mm 10 kg
The RCA cable 2.3 m pair plug is a WBT 0101 rare LUXMAN 7N interconnect cable. The collet chuck plug ensures a secure connection. There is a slight slope at the + terminal on one side (Murakoshi Yoichi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
The price has been drastically reduced! 2024/5/19 sales price 320,000 yen A next-generation model with the L-550AX reviewed and refined from basic performance. We have introduced the latest technology comparable to the higher-level model L-590AX2, such as the unique ODNF 4.0 amplification feedback circuit, the new LECUA 1000, and a buffer circuit with a discrete configuration. It is a practical modern machine with enhanced resolution while acquiring sound with a sense of luster and density unique to pure A class amplification systems. The exterior is good with no conspicuous scratches. Serial G60500154 (Yonejima Satoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
※Since the terminal is broken in one place, it is inexpensive. Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. There are scratches and dullness on the exterior. Serial 121-1 G1 (Satoshi Yonejima)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2509-1G2 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
The Luxman selected tube set 12AX7 x 3/12 AU7 x 5 (with LUXMAN logo) 12AX7 is a GE print with the same structure as Siemens from the same period made in Yugoslavia, and the 12AU7 is a high-reliability type (6189) measuring instrument made by GE and seems to be an unused item due to the state of the tube measured by the TV-7 measuring instrument TV-7 made by GE! (KOJIMA Yosuke)
Accessories: original box, warranty card
MQ-360 vacuum tube set Lux selected product 6550A x 4, 12AU7 x 2, and 6FQ7 x 2 configurations 6550A is made by GE, 1 12AU7 is made in Yugoslavia, the other is a GE black plate specification, and the 6FQ7 all seem to be made by GE, and the printing is peeling due to aging, but it seems that it is an unused item due to tube condition! Both spheres have already been measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box, warranty card
Solid brass machined short pin for RCA terminals. Attach it to the input terminal of an audio device to stabilize the input circuit. The exterior has dullness and light threads (Satoshi Yonejima)
Accessories: original box
Main specifications: set of 8, solid machined brass, 24k gold plated, length 28.5 x diameter 12 mm, weight 12.5 g/piece
Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. Small scratches are scattered on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK)
Accessories: instruction manual (copy)
Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
Set of 4. High quality banana plugs made from machined solid brass. The terminals are machined from solid brass and finished with 24K gold plating. Since there are fixing screws at the tip and the root, the cable can be firmly fixed. The exterior has dullness on the plating part (Hiroki Aso)
Accessories: none
Main specifications: machined solid brass, 24K gold plating, 21.5g/piece
Set of 4. High quality banana plugs made from machined solid brass. The terminals are machined from solid brass and finished with 24K gold plating. Since there are fixing screws at the tip and the root, the cable can be firmly fixed. The exterior has dullness on the plating part (Hiroki Aso)
Main specifications: machined solid brass, 24K gold plating, 21.5g/piece
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/10 sales price 278,000 yen ※It is inexpensive because conspicuous scratches and other small scratches are scattered on the front panel. An advanced model of the company's SACD player with a beautiful blaster white body color. This is a powerful machine with a higher fidelity tone than conventional luckstones, sound images with high instantaneous power, and a vast sound field. The high resolution in the mid to low range is particularly attractive. In addition to front line scratches, there are small scratches on the lower left and right sides of the front panel (Yamato Yuki)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: remote control instruction manual power cord
Main specifications: SACD/CD player equipped with PCM1792 x 2 D/A converter W440 x H140 x D383 mm 15.5 kg
The price has been drastically reduced! 2024/5/10 sales price 138,000 yen Maintained by Luxman Service in 2022! LUXMAN pure A class power amplifier. A familiar luxe stone that combines a unique sense of temperature and smoothness. The construction unique to the bubble period gives a sense of scale and thickness in the low range. It allows me to thoroughly enjoy the music. The exterior has scratches and some cracks on the back of the cabinet. Serial A71210129 (Fujisawa Yukishi)
Maintenance information: 2022.11.25 manufacturer maintained (attenuator disassembly, contact cleaning. Attenuator and knob installation reworked. Foundation solder correction. Internal cleaning. (General adjustment)
Accessories: copy of instruction manual
Main specifications: stereo output 55 W+55 W (8 ohms) pure A grade operation, mono output, 220 W (balanced input), frequency characteristics, 5 Hz to 300 kHz, damping factor, 100 S/N ratio, 110 dB, balanced input terminal, direct reading type level indicator, W444 x H211 x D417 mm, 22 kg
Unopened item! Power cable 1.8 m LUXMAN reference cable JP series High-purity oxygen-free copper (OFC) 0.26 mm x 66 bars are used as conductors. It uses a 2-core non-twist structure to achieve smooth sound quality (Kojima Yosuke)
Accessories: original box
The price has been drastically reduced. 2024/5/10 sale price 398,000 yen one-owner item! Instantaneous power reality of up to 960W has been acquired from 120W (8Ω), which pursues drivability for all speakers, and is compatible with pure A class operation of up to 6W by setting bias current. A masterpiece that combines rich musical expression with high power. There is rust on the balance terminal, but it is good without any other noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.10 operation confirmed
Accessories: manual, power cable
Main specifications: rated output 120W+120W (8Ω) /stereo, 240W+240W (4Ω) /stereo, 480W (8Ω) /mono instantaneous maximum output/damping factor 960W+960W (1Ω) /stereo, 1920 W (2Ω) /mono time/350 input sensitivity/input impedance 1.1 V/120W (8 Ω) /unbalanced 51 kΩ, balanced 34 kΩ input/output unbalance 1 system, balance 1 System/large speaker terminal 1 system W440 x H190 x D427 mm 27.5 kg
LUXMAN's discrete premium line selector. You can select sources for up to 4 models. High-rigidity aluminum material is used for the housing, and 6N (99.99997% copper) wire with little information loss is used as the wiring material. The exterior is in good condition with no conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.6 continuity confirmed
Accessories: instruction manual
Main specifications: 6N copper wire, gold-plated internal wiring, 4 systems can be switched, W370 x H71 x D136 mm, 2.4 kg
Vacuum tube graphic equalizer in the ONTOMO MOOK appendix. 5 bands (55, 220, 880, 3.5 k, 14 kHz) can be adjusted by ±8 dB. It comes with an ON/OFF switch for the GEQ function, so you can play easily. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: power cord
Main specifications: input impedance: 500 kΩ output impedance: 330 Ω frequency characteristics: 20 to 100 kHz S/N ratio: 100 dB crosstalk: 80 dB or less W183 x H120 x D88 mm (including knobs and terminals)
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Luxman's blockbuster MM/MC phono equalizer amplifier is still highly popular. Clean sound with a good S/N ratio with a 3-circuit all-discrete configuration of MC head amplifiers, RIAA amplifiers, and output buffer amplifiers. The sound with excellent gain and a sense of relaxation is attractive. The exterior has dents, small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: instruction manual
Main specifications: mm/MC independent NF type equalizer gain mm36dB MC62dB input sensitivity mm4mV/MC0.2mV compatible impedance mm10kohm or less/MC40Ω or less input impedance mm50kΩ/mc200Ω w126 × H183 × D421 mm 6.8 kg
In September 2023, the capacitor was replaced and full maintenance was completed, such as overhauling SW models! A tubular control amplifier representative of Lux. It is soft and produces good mid-range sounds. As you play, the sound becomes more familiar, so I want this amplifier to stay with for a long time. There are black clouds on the exterior (Kobayashi Hitoshi)
Maintenance information: 2023.9.16 Maintained (stepUP transformer socket, tantalum capacitor, block capacitor, electrolytic capacitor, film capacitor, rectifier diode, DIN terminal, power supply SW, headphone volume exchange, RCA terminal polishing, tone VR, lever SW type decomposition cleaning and oxidation and sulfidation prevention grease application, some vacuum tube 12AX7 replacement, cabinet exterior repair/polishing/oil finish, input/output waveform (Check, check the residual noise, check the sound output)
Accessories: none
Main specifications: vacuum tube 12AX7 x 6/12 AU7 x 1 using a tubular control amplifier Input: 2 phono system, line system, 3 system, tape system, 2 system output: 2 systems W476 x H190 x D275 mm 12 kg
The price has been reduced. 2024/4/29 sales price 45,000 yen Luxman high quality speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
The price has been reduced! 2024/4/29 sales price around 298,000 yen is good! Luxman tube power amplifier. Using KT88 as the output stage, it is a powerful yet highly transparent amplifier. It is a vacuum tube amplifier with excellent modern resolution and a sense of speed while being based on classical designs from the past. Serial M20600470A (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 25W+25W (4.8/16Ω) input direct 1 system variable 1 system output 1 system (4, 8, 16 ohm independent) power consumption 150 W 440 x 184 x D230 mm 16.1 kg
The price has been reduced! 2024/4/29 sales price around 298,000 yen is good! A new-generation Lux vacuum tube control amplifier with completely new equipment, such as an exterior design and the addition of balance inputs. You can enjoy a nostalgic traditional design with modern high performance at the same time. Made in 2023 Serial 630600576B (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Vacuum tube/ECC83S x 3, ECC82 x 5 inputs/3 lines, 1 balanced system, 1 phono system, 1 phono system, 1 recording input/output/line 2 system output/line 2 systems, power consumption 32W, W440 x H169 x D307 mm, weight 13.3 kg
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2222-5M2B (Fujisawa Yukishi)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Classic speaker selector. It is a convenient car that outputs from 1 input system to 4 systems, or conversely, outputs from 4 input systems to 1 system (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/25 sales price 19,800 yen ※There is no problem with operation, but it is cheap because there is a lot of rust. LUXMAN's thin synthesizer tuner. The design matches the Luxman Primaine from the 80s, and has a nostalgic, nostalgic atmosphere. The exterior has dullness, small scratches, and rust, and there is a feeling of use, as the power cable has been changed to an external product. Serial G2701694 (Hiroki Aso)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: FM/AM tuner FM tuner part S/N stereo 80dB selectivity NARROW (±300kHz) 80dB
WIDE (±400kHz) 65dB AM tuner part S/N50dB dimensions W453 x H87 x D344 mm weight 4.8 kg
The price has been drastically reduced. 2024/4/24 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. The main unit is in good condition, but it is written in the instruction manual (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
Speaker selector that can be switched by operating a remote control. It is a 3-system switchable type using a large speaker relay, and can also be switched with the main unit button. The exterior is scratched and dull, and there is a feeling of use (Yamato Yuki)
Maintenance information: 2024.4.23 continuity confirmed
Accessories: remote control power cord
Main specifications: 3-system switching W297 x H79 x D137 mm 1.8 kg
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources (Mizushima Itsuro)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
The disposal price has been reduced. Member discounts are not applicable. 2024/4/21 sales price 148,000 yen ※ The hinge is damaged, but there are no replacement parts, so this is the current situation. Maintained! Armless PD444 Long arms and short arms can be set, and an original system can be built by placing an arm of your choice on it. The highly rigid chassis and flexible suspension create a tight, easy-to-see sound (Murakoshi Yoichi)
Maintenance information: 2024.4.20 maintenance (power supply circuit, motor servo circuit electrolytic capacitor replacement, power lamp LED replacement, each rotation lock check. (Arm base lock lever with E-ring attachment)
Accessories: motor fixing beads, EP adapter, dust cover, instruction manual, armrest
Main specifications: Direct drive system, quartz control, 30cm, die-cast aluminum turntable, 33/45 rpm, 2 speed switching, W664 x H160 x D392 mm, 22 kg
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources. There is a feeling of use on the exterior, such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/4/17 sales price 278,000 yen This is an advanced model of the company's SACD player with a beautiful blaster white body color. It has a higher fidelity tone than conventional luckstones, and the sound image with high instantaneous power, especially the elasticity in the mid and low frequencies, is attractive. On the exterior, there are scuffs scattered on the top plate and side plate. Serial G11100859D (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: SACD/CD player, D/A converter equipped with PCM1792 x 2, W440 x H140 x D383 mm, 15.5 kg
Set of 2 RCA short pin plugs from the “Stereo” magazine appendix. By shorting unused input terminals, the circuit is stabilized and sound quality is improved (Asaine Tomo)
Accessories: none
The price has been drastically reduced. 2024/4/9 sales price 238,000 yen Luxman wood cabinet series CD exclusive player. The output circuit is provided with 2 systems, a semiconductor and a vacuum tube, so you can switch and listen. The vacuum tube output uses a buffer circuit using the “ECC82” to achieve a smooth, musical analog-like sound with a full mid-range range. There is dullness in places (Kojima Yosuke)
Accessories: remote control, instruction manual, power cable
Main specifications: vacuum tube using 2 chCD ECC82 x 1 frequency characteristics · semiconductor 20 Hz to 20 kHz, vacuum tube 20 Hz to 20 kHz, vacuum tube 20 Hz to 20 kHz W440 x H167 ✕ D286 mm 10.8 kg
Maintained by the manufacturer! A true pure Class A amplifier that supplies constant bias current up to maximum output. Furious 100W+100W high power machine. Supported by a strong power source, this is a high-power, supple, and elegant sound typical of the company. There are small wounds, line wounds, etc. (Oikawa Tetsuji)
Maintenance information: 2024.4.6 Luxman headquarters maintained (cleaned due to poor attenuator contact. The BTL switch was replaced due to poor contact. internal inspection, cleaning. (General adjustment)
Accessories: copy of instruction manual
Main specifications: continuous effective output 100W+100W (8Ω, grade A) frequency characteristics 5Hz to 300,000 Hz SNR 120dB damping factor 500 power consumption 280W x 2 size W438 x H220 x D474 mm weight 52 kg
Maintained. An attractive pre-main amplifier with a thick sound that is a bit different from the current Lux. It is a high performance amplifier equipped with a Plus-X power supply with ample stabilization control and a phono straight function. It is a model that is compatible with MM/MC and is easy to use. There is a feeling of use on the cabinet, such as scratches and chipped veneers. Serial A2503701 (Mizushima Itsuro)
Maintenance information: 2024.4.4 maintenance completed (disassemble all lever switches, polish contacts, apply contact cleaner, replace defective output relay contacts, replace power lamp, polish input/output pin jacks)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) W464 x H156 x D332 mm 11 kg
Maintained. An eye-catching Lax pre-main amplifier with a unique indicator. It is a traditional lackstone, and the soft and warm mid-low range like a vacuum tube is attractive. The speakers, which have a solid sound quality, also play softly. There is a slight gap in the scale on the BASS dial. Serial 11400208 (Mizushima Itsuro)
Maintenance information: 2024.4.4 maintenance completed (replacement of deteriorated parts in each circuit, correction of switch and volume contacts, input/output pin jack polishing)
Accessories: none
Main specifications: 40W+40W (8Ω) W443 × H153 × D273 mm 9.3 kg
The price has been drastically reduced. 2024/4/3 sales price 298,000 yen A current belt drive type player equipped with Luxman's original tone arm. Dust coverless specification. The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 operation confirmed
Accessories: instruction manual, power cord, original box, shell (lead wire missing) EP adapter, screwdriver, 2 types of wrenches, handle
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
The Mark 2 model has a higher degree of perfection by drastically upgrading the power supply and preamp circuit. Higher grade technology comparable to separate amplifiers has been adopted, and the sense of density and glossy tone unique to pure A grade has been refined. The exterior has scratches etc. on the upper front, and there is a feeling of use. Serial G50900145 (Tomoho Asaine)
Maintenance information: 2024.4.2 operation confirmed
Accessories: instruction manual copy remote control power cable
Main specifications: pure A grade premain amplifier rated output 30W+30W (8Ω), 60W+60W (4Ω) input/line 4 systems, 1 phono system (MM/ MC switching), balance line 2 systems, recording input/output 1 system, separate input/output 1 system, speaker output A/B2 system (AB simultaneous output possible), damping factor 320 W440 x H193 x D463 mm 28.4 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/2 sales price 258,000 yen A CD/SACD player that inherits the performance of the company's flagship model D-08u and is compatible with playback of file sound sources via USB connection. It plays music well with a lot of information and clarity. A modern all-purpose machine with a high level of freshness and a good signal-to-noise ratio. The exterior has a feeling of use such as dullness. Serial G50700114 (Tomonori Asaine)
Maintenance information: 2024.4.2 operation confirmed
Accessories: Remote control instruction manual copy power cable
Main specifications: 2-channel SACD, CD player compatible sampling frequency USB input (PCM) 32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192k (16, 24, 32 bit) /USB input (DSD) 2.82M, 5.64 MHz (1 bit) /Coax/OPT input 32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192 kHz (16, 20, 24 bit) W440× H133×D410mm 14.8kg
Luxman's mid-level universal player. You can enjoy the difference between the tone with the full DAC function and the sound with the normal function. The smooth, soft-touch fullness DAC's tone is reminiscent of the luckstones of yesteryear. There are small scratches on the side, and there is dullness etc. (Oikawa Tetsuji)
Maintenance information: 2024.4.2 operation confirmed (CD/SACD playback OK, remote control OK)
Accessories: remote control, instruction manual, power cable (general purpose), connection cable
Main specifications: Playable disc/DVD audio, DVD video, CD, VIDEO-CD, CD-R, MP3, SACD (multi-channel, stereo) W467 x H132 x D370 mm 13 kg
Maintained by Luxman! This is a pure Class A premain amplifier that combines subtlety and strength. The sound unique to Lux Class A amplifiers, which is smooth, glossy, and has a sense of scale, is attractive. The low frequency playback also has a sense of volume, and it has a reputation for being compatible with European speakers such as TANNOY. There is a feeling of use over time, but there are no noticeable scratches (Sasaki Shota)
Maintenance Information: 2024.3.29 Manufacturer Maintained (Speaker Terminalum Contact Cleaning. (Internal cleaning, general adjustment)
Accessories: copy of the manual
Main specifications: 50W+50W (8Ω), pure A class operation, equipped with a high-capacity toroidal transformer, phono equalizer, MM/MC compatible, W438 x H176 x D467, 30 kg
Maintained by Luxman Service! Line-specific control amplifier. This control amplifier can be called Luxman's turning point. The volume is well built, and the sound quality is mild and makes you feel thick from low volume. It's soft and supple like a lux, so you can relax and listen for a long time. There are very minor scratches on the front and top plate, but there are no noticeable scratches overall (Sasaki Shota)
Maintenance information: 2024.3.29 manufacturer maintained (muting circuit, capacitor changed. Foundation solder correction. General adjustment) 2015.5.6 manufacturer maintenance completed (each volume contact cleaning main board solder correction lamp replacement, overall adjustment)
Accessories: manual
Main specifications: 1 CD input system (RCA/XLR switching), line input, 5 systems, frequency characteristics, 5 Hz to 100,000 Hz, SNR ratio, 110 dB or more, line phase sensor dimensions W444 x H120 x D414 mm weight 11 kg
A very rare Lux noise cutting transformer. It cuts harmful noise from the power supply and enables high-quality music playback. What is the exterior. There are threads and dullness. Serial 21030124 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: instruction manual
Main specifications: W231 x H137 x H207 mm 6.9 kg