Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Network players
- Integrated amplifiers
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Cables
- Insulators
- Racks
- Parts
- Tubes
- Manual
- Audio set
- Other audio
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other records
- Other soft
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
Manufacture:DYNACO
Price: JPY 90,727 Sold Out
- description
- Disposal prices have been reduced. Member prices are not applicable. 2023/5/21 sales price 128,000 yen maintenance completed. This is Dynaco's tube control amplifier. This is an amplifier where you can enjoy the warm and comfortable sound unique to vintage. While the microwave feel is moderate, the nostalgic sound that emphasizes the atmosphere has a unique flavor that is hard to get. The top plate is dull and stained, but it is a pretty clean individual (Oikawa Tetsuji) Maintenance information: 2023.5.21 Maintained (4 additional rubber feet, tape switch contact instability repair, spark killer addition, block capacitor 30/20/20/10 μF deterioration replacement, switching noise reduction measures → 1/2 W additional resistors, 2 additional resistors, vacuum tube sockets and RCA jack cab repairs ※ operation has been checked with other AC100 to 117 V) Accessories: none Main specifications: vacuum tube 12AX7 x 4, 12X4 line input 5 system phono 1 system (MM) pre-out 1 system W385 x H134 x D230 mm 7 kg
- description
- Triode tube preamp. It is a control amplifier that uses 274B as the rectifier tube and is equipped with a phono equalizer without a phono equalizer and is equipped with a 4-band equalizer that can control the sound field in detail. As for the exterior, there is a feeling of use such as scratches and dullness on the sides. *Only one part of the rubber foot attached under the insulator is not genuine. Serial 101000151 (Asae Tomonori) Maintenance information: 2023.5.22 operation confirmed Accessories: remote control instruction manual power cable Main specifications: Vacuum tube/12AX7 (ECC83S) x 4, 274B x 1, frequency characteristics approx. 10 Hz to 100 kHz to 100 kHz to 100 kHz SNR 96 dB input terminal 5 system output terminal 3 system power consumption 30W W340 x D315 x H187 mm weight 8 kg
Manufacture:McIntosh
Price: JPY 407,273 Sold Out
- description
- Maintained! Late model of the C20. Among McKin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only the jazz, but also the vocal sounds are excellent. The unique deep, lustrous, and highly artistic tone shows a particularly good compatibility with vintage speakers. As for the exterior, there is an overall sense of use due to aging. Serial 130A6 (Hiroki Aso) Maintenance Information: 2023.5.20 Maintained (Electrolytic Capacitor 8μF Deterioration Replacement Oil Capacitor 0.5μF Deterioration Replacement 2 Resistors 1/2W Deterioration Replacement Vacuum Tube Socket and RCA Jack Recasimation Repair Other Operation Checked with AC 100 to 117 V) Accessories: copy of instruction manual Main specifications: Tubular phono 2 system phono equalizer curve variable W440 x H165 x D316 mm 8.7 kg vacuum tube ECC83 x 5 (made by TELEFUNKEN) ECC82 x 2 (made by TELEFUNKEN) EZ90 x 1 (made by Mullard)
- description
- Maintained! Original Model 7 You can enjoy the deep, exquisite balance between the glossy mid-high range tone with a high sense of transparency. For analog fans, it's a model that's been over half a century since it went on sale, but it's still one they admire. The lustrous and indescribable tone is a charm that cannot be enjoyed on modern machines. There are scratches and bumps on the exterior. Serial 7-14836 (Satoshi Yonejima) Maintenance information: 2023.5.20 maintained (balanced volume B curve → replaced with MN curve · block capacitor 50 μF × 3 defective replacement · oil capacitor 0.1 μF other deterioration exchange 8 · electrolytic capacitor 200 μF deterioration exchange 2 · vacuum tube 12 AX7 deterioration replacement 2 · shield case crack replacement 2 · high pressure selenium deterioration countermeasures → diode addition · side pad deterioration replacement · vacuum tube socket and RCA Jack caulk repair. (*Operation has also been checked with AC 100 to 117 V) Accessories: no accessories Main specifications: tube type control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, weight 7.5 kg
Manufacture:Chriskit
Price: JPY 81,636 Sold Out
- description
- This is Chris Kitt's first vacuum tube preamp from Hi-Fi. This model was created based on Macintosh's C22 circuit. The sound is rich and natural with a rich, natural touch, and rich in flavor. The mid range is glossy, and it really vividly expresses wind instruments and vocals. The exterior has dirt, scratches, threads, stains, etc. (Satoshi Yonejima) Maintenance information: 2023.5.13 Maintained (power cord INLET processed and installed. Main volume replacement. Replace 1 vacuum tube socket. In-circuit capacitor and coupling capacitor deterioration replacement. I/O pin jack polish. Since this unit is a vacuum tube preamp, there will be slight cirrhosis until it stabilizes, so after a little while it fits and can be used without problems) Accessories: power cable Main specifications: Input: Phono 1 system, 3 lines, W526 x H165 x D295 mm, weight 8.4 kg
Manufacture:K.A.LAB
Price: JPY 31,818 Sold Out
- description
- *Currently on sale. A control amplifier dedicated to K.A.Lab's tubular line that hasn't arrived easily. There is stickiness and richness in the mid range, and the tuning is easy to listen to. The cost performance is high. If you have been looking for it, please take this opportunity! On the exterior, there is a circular mark on the top plate, and there is a feeling of use such as dirt (Tomonori Asae) Maintenance information: 2023.5.2 operation confirmed Accessories: power cable Main specifications: vacuum tube used 59EX9×2 6X4WA ×1 W330 × H95×D280mm 6.26 kg (actual measurement)
- description
- The price has been drastically reduced. 2023/4/22 sales price 258,000 yen. Maintained! This is Yoshiro Uesugi's first control amplifier. The beautiful and delicate tone also expresses the nuances that drift through each song. Furthermore, it has a reputation for phono, and the overhang is exquisite, making it a superb item that can be recommended to analog fans. On the exterior, there are scratches and abrasions on the cabinet, and the main body is smudged, and there is a feeling of use. Serial 073 (Kanai Hidetsugu) Maintenance information: 2023.4.22 Maintained (AC cord, neon tube, NF circuit capacitor replaced, rotary switch polished and cleaned, contact protector applied, and each input/output checked.) Accessories: power supply unit, power cable, connection cable Main specifications: Vacuum tube ECC83/12AX7 AUX input 3 system phono input 3 system line input system 2 system output system [main unit] W532 x H146 x D360 mm 10.7 kg [power supply unit] W127 x H146 x D314 mm 4.3 kg
- description
- This is a full restoration model where all internal deteriorated capacitors have been replaced, and all levers and switches have been disassembled and cleaned. More than 50 years have already passed since it went on sale, but you can comfortably listen to the sound from that time with a reassuring 2-year warranty. A classic vacuum tube preamp that is supple and thick. The relaxed, high musical sound quality is an original character from the old days of love. It is a historic amplifier that richly and softly expresses a wide range of music genres (Murakoshi Yoichi) Maintenance information: 2023.1.27 Maintained (cabinet exterior repair, polishing, oil finish. (Vacuum tube sockets, electrolytic capacitors, oil capacitors, film capacitors, rectifier diodes, DIN terminals, power supply SW/monitor SW exchange, RCA terminal polishing, volume VR, balance VR, tone VR, rear panel VR, lever SWs disassembly, cleaning, and oxidation/sulfation prevention grease application, input/output waveform confirmation, sound output confirmation OK) Accessories: instruction manual (copy), power cord Main specifications: Lux method NF type tone control frequency band 10 to 30,000 Hz SN ratio 60 dB or more, vacuum tubes 12 ax7 x 5, ECC 83 x 2, W476 x H190 x D275 mm, 12 kg
- description
- *The McIntosh C22 design model is a cost-effective amplifier that allows you to enjoy thick, thick sound in the mid-range. The MC/MM has a built-in phono recorder, and the records are thick and full. It is also possible to activate LOW boost with an internal switch (Kojima Yosuke) Maintenance information: 2023.4.21 operation confirmed Accessories: instruction manual, power cable, manufacturer measurement results table (2017) Main specifications: 12AX7 × 6 LINE 3 system PHONO (mm · MC · high · MC /low) W420 × H140 × D330 mm 7 kg
- description
- Disposal prices have been reduced. Member prices are not applicable. 2023/4/15 sale price 278,000 yen This is an eye-catching SUN AUDIO preamp with a black face and bronze panel. All transformers are custom-made by Tamura, and the printed circuit boards are not used and seem to be particular about being lead wire types. There are dullness and fine bruises here and there (Kojima Yosuke) Maintenance information: 2023.4.15 Maintained (MONO circuit, balanced volume circuit, normal/balanced output circuit, TAPE input/output circuit do not function, and many circuits have been changed, so connection analysis, correction, switch, contact cleaning, capacitor inspection, operation of each input/output has been checked) Accessories: power cable Main specifications: 4 line inputs, phono (MM), 1 system, tape system, 1 system, vacuum tube: 12AX7 × 1, 12 AU7 × 5, 6X4 × 1 ※This is not a mounted vacuum tube W430/H90/D250mm 8kg
- description
- The price has been drastically reduced! 2023/4/15 sale price 598,000 yen Imai Shoji genuine product. This is the bestselling SL-1 Ultimate MK2, a high-end ball-type preamp. A popular preamp that sells high-SN that matches modern SP in addition to the rich tone typical of a tube type. The MC phono cartridge load method is also interesting, and the impedance can be changed by replacing the road short pin for the MC needle. There are small scratches on the exterior. 100V specification Serial 10264 (Satoshi Yonejima) Maintenance information: 2023.4.15 operation confirmed Accessories: power cord, RCA plug, original box Main specifications: 2 line input systems, 1 phono input system, 2 pre-output systems, maximum power consumption 80 W size, main unit W480 x H130 x D380 mm/power supply unit W150 x H100 x D310 mm, weight 29 kg
- description
- Disposal prices have been reduced. Member discounts are not applicable. 2023/4/12 sales price: 188,000 yen Preamp for Wasugi's vacuum tube type line. It's not a printed circuit board, but old-fashioned lug board wiring, and manual wiring made by veteran craftsmen, which is truly beautiful. You can enjoy the clear and neat Japanese cedar sound. There are scratches on the exterior wood cab (Oikawa Tetsuji) Maintenance information: 2014.4.12 Maintained (volume, pin jack, tubular electrolytic capacitor, 2W gold coating resistor, power switch replacement. knob front panel, wood case cleaning, performance measurement, sound check) Accessories: none Main specifications: 5 input systems, 2 output systems, W435 x H146 x D360 mm, 13 kg
- description
- Disposal prices have been reduced! (Member discounts are not applicable) 2023/4/10 sales price 698,000 yen 2022/11 maintenance completed! ORIGINAL MODEL 7. You can enjoy the deep, exquisite balance between the glossy mid-high range tone with a high sense of transparency. For analog fans, it's a model that's been over half a century since it went on sale, but it's still one they admire. Please enjoy the glossy and indescribable atmosphere. The exterior is dull and small scratches over time, and there are repair marks on the cabinet. Serial 7-20001 (Asae Tomonori) Maintenance information: 2023.4.4 operation confirmed 2022.11.29 maintenance (MODE SELECTOR disassembly repair, vacuum tube socket recasement repair, RCA jack polish and recasement repair. Operation has also been checked with AC100V (the power transformer has been rewound exclusively for AC100V by other companies) *Since the main volume is an A curve, OUT LEVEL has been narrowed down.) Accessories: none Main specifications: tube type control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, weight 7.5 kg
- description
- The price has been drastically reduced! 2023/4/15 The HP-200 model equipped with a phono amplifier has arrived at a sale price of 498,000 yen! Vacuum tube control amplifier with full function remote control. A Hovland “Generation 3” silver-plated interconnect is used for the wiring of the main part, and you can experience a beautiful appearance, a flat, warm sound, and a surprising sense of silence. If you remove the side panel, you can set the phono amplifier. The exterior has dullness and scuffs. Serial 08125007 (Tamura Eiji) Maintenance information: 2023.4.15 operation confirmed Accessories: remote control, power cable, copy of instruction manual Main specifications: W464×H124×D394mm weight 13kg
- description
- Maintained! This is Yoshiro Uesugi's first control amplifier. The beautiful and delicate tone also expresses the nuances that drift through each song. Furthermore, it has a reputation for phono, and the overhang is exquisite, making it a superb item that can be recommended to analog fans. On the exterior, there are scratches and small scratches on the cabinet and the top of the power supply unit. Serial 832 (Yonejima Satoshi) Maintenance information: 2023.4.6 maintained (main volume replacement EQ circuit socket replaced due to corrosion AC cord insulating tape replacement vacuum tube pin cleaning each input and output sound check.) 2019.1.23 Maintained (SW/VR disassembly contacts repolished, oxidizing/sulfation prevention grease applied. Input/output waveform confirmation, sound output test) Accessories: copy of instruction manual, power cord, connection cord Main specifications: Vacuum tube ECC83/12AX7 AUX input 3 system phono input 3 system line input system 2 system output system [main unit] W532 x H146 x D360 mm 10.7 kg [power supply unit] W127 x H146 x D314 mm 4.3 kg
- description
- A convenient preamp with phono equalizer and tone control. Beautiful hand-wiring without using printed circuit boards. Designed to make you feel thorough noise countermeasures, the vacuum tube uses ECC83, which was specially designed in the latter half of the 1970s, and every detail, such as independent tone control for left and right, is carefully crafted. Perfect to pair with U-BROS-30 The sound is natural and high quality. On the exterior, there is a feeling of use such as dullness and small scratches. Serial 076 (Hiroki Aso) Maintenance information: 2023.4.2 operation confirmed Accessories: none Main specifications: Vacuum tube used: 12AX7×4 phono equalizer (MM) equipped with tone control line, 4 system inputs, W375 x H146 x D360 mm, 9.0 kg
- description
- This is a full restoration model where all internal deteriorated capacitors have been replaced, and all levers and switches have been disassembled and cleaned. More than 50 years have already passed since it went on sale, but you can comfortably listen to the sound from that time with a reassuring 2-year warranty. A classic vacuum tube preamp that is supple and thick. The relaxed, high musical sound quality is an original character from the old days of love. It is a historic amplifier that richly and softly expresses a wide range of music genres (Sasaki Shota) Maintenance information: 2023.1.27 Maintained (cabinet exterior repair, polishing, oil finish. (Vacuum tube sockets, electrolytic capacitors, oil capacitors, film capacitors, rectifier diodes, DIN terminals, power supply SW/monitor SW exchange, RCA terminal polishing, volume VR, balance VR, tone VR, rear panel VR, lever SWs disassembly, cleaning, and oxidation/sulfation prevention grease application, input/output waveform confirmation, sound output confirmation OK) Accessories: manual copy, power cable Main specifications: Lux method NF type tone control frequency band 10 to 30,000 Hz SN ratio 60 dB or more, vacuum tubes 12 ax7 x 5, ECC 83 x 2, W476 x H190 x D275 mm, 12 kg
Manufacture:McIntosh
Price: JPY 219,091 Sold Out
- description
- Disposal prices have been reduced. Member discounts do not apply. 2023/3/31 sales price 298,000 yen maintenance completed! The one-sided ch is a rare model called a mass-produced prototype. Comes with a power supply unit so you can use it right away. You can change the equalizer curve, which is a must-see for old record fans. An early Macintosh tube mono preamp. Please enjoy the honest and rich Old McKin sound. There is rust, dullness, and a feeling of use due to aging (Kobayashi Hitoshi) Maintenance information: 2023.1.28 maintenance (power supply circuit change and rectifier tube 6V4 addition. Block capacitors 30/30/20 μF x 2, electrolytic capacitors 50 μF 3 x 2, resistors 1W and 1/2W 2 x 2 are replaced. Short pin added, vacuum tube socket and RCA jack cab repair. Serial No. 2441 0.033 μF oil capacitor and 6 others, main volume, resistor 1/2 W replaced. Operation has also been checked with AC100V (this model is a mass-produced prototype on one side, so the internal circuit and parts arrangement etc. are different). Accessories: power supply unit Main specifications: Vacuum tube with LINE phono (MM) input 12AX7 x 3 main body W280 x D190 x H110 mm power supply unit W181 x H116 x 153 mm
Manufacture:McIntosh
Price: JPY 452,727 Sold Out
- description
- The rare early C20 has arrived, where the deteriorated main volume, block capacitors, oil capacitors, and electrolytic capacitors have all been replaced and refreshed. It's been over 60 years since it went on sale, but it's a safe 2-year warranty. The tone is thick and soft to the touch unique to the Old Mackin, and it vividly depicts music in the mid to high range with a different luster from the C22. There are dullness and small scratches appropriate to the model year (Sasaki Shota) Maintenance information: 2023.3.4 Maintained (starting current inspection and PSE inspection · main volume galley replacement · block capacitor 40/20/20/20 μF other defective and deteriorated replacement 2 pieces · 1000 μF 2 electrolytic capacitors replaced for the original circuit · 0.1 μF film capacitors replaced with other oil capacitors and ceramic capacitors 33 pieces · electrolytic capacitors 50 μF replaced with other oil capacitors and ceramic capacitors made by Sprague, 4 etc. Vacuum tube 12AU7 noise exchange/lamp deterioration exchange/RCA jack and vacuum tube socket caulk repair*Other operation has been checked with AC100 to 117 V*If the volume is moved after the power is turned on, it will crackle for about 1 minute due to the effects of capacitor charging and discharging) Accessories: nothing Main specifications: vacuum tubes used 6X4, 12AX7, 12AU7 dimensions W390 x H146 x D315 mm, weight 8.3 kg
- description
- Maintained! Vacuum tube preamp equipped with a CR type equalizer. Carefully designed using an all-stage non-feedback phono circuit. It is characterized by high clarity in the midrange, and the good separation of sounds leaves an impression on me. The surface is plated in silver. The exterior has oxidation, dullness, and small scratches (Satoshi Yonejima) Maintenance information: 2023.3.31 Maintained (there is a level difference of about 35 dB in OUT1/2. There is a high resistance between the terminals, so I fixed it. Since the low filter circuit is disconnected, the capacitor addition circuit has been corrected. Vacuum tube socket replacement. Additional solder for each part. foot mount (Check the operation of each input/output) Accessories: power cord Main specifications: Input: PHONO ✕ 1, CD ✕ 1, AUX ✕ 1, Radio ✕ 1 Vacuum tube: 12AT7/ECC81 ✕ 6 W430 × D300 × H166 mm Weight approx. 6 kg
- description
- Thorough maintenance has been completed with attention to detail, such as replacing 39 capacitors, replacing 9 vacuum tube sockets, replacing switches, and repairing the exterior of the cabinet! It's a lax sound that is soft and has a strong mid-range sound. The sound becomes more familiar depending on how you play it in, so it's an amp I want you to stick with for a long time (Hiura Katsutsugu) Maintenance information: 2023.2.16 Maintained (Master volume, tantalum block electrolytic/film capacitors, diodes, vacuum tube sockets, and DIN terminals have been replaced. Cabinet exterior repair/polishing/oil finish) Accessories: instruction manual power cable Main specifications: vacuum tube/12AX7×6, 12AU7×1 input/phono 2 system, line system 3, tape system 2 output/2 systems W476×H190 ×D275mm 12kg
- description
- Maintenance completed! Black type with VU meter. The famous ONLIFE U-22 control amplifier. The rich, delicate, clean, and elegant sound typical of a tube amp is attractive. Sound quality deterioration is eliminated as much as possible with a simple circuit design. Recommended for vintage fans and analog enthusiasts. As for the external condition, dullness and small scratches can be seen over time. Serial 30325 (Yamato Yuki) Maintenance information: 2023.3.31 Maintained (vacuum tube 12AU7 defective replacement TONE switch and volume disassembly repair and semi-fixed resistor readjustment gang error improvement measures → resistor 1/4 W addition AC cord disconnection, oil capacitor 0.5 μF, other deterioration replacement, 10 electrolytic capacitors, 22 μF, other deterioration replacement, 8 tubes, vacuum tube socket and RCA jack cab repair (*Operation has been checked with 100V AC for others) Accessories: original box Main specifications: tube preamp 12AX7×4, 12AU7×2 with UV meter size W430×H145×D245mm weight 6.5 kg
Manufacture:DYNACO
Price: JPY 77,091 Sold Out
- description
- The price has been drastically reduced! 2023/3/7 sales price 99,800 yen with cabinet This is a DYNACO tube control amplifier. This is an amplifier where you can enjoy the warm and comfortable sound unique to vintage. While the microwave feel is moderate, the nostalgic sound that emphasizes the atmosphere has a unique flavor that is hard to get. There are scratches, dents, and some letters missing on the cabinet. Also, there is no top lid on the main unit. (Miura Kimiya) Maintenance Information: 2022.9.9 Maintained (AC cord replacement. Two 2000μF electrolytic capacitors replaced. Block capacitor 30/20/20/10 μF deterioration replacement. Vacuum tube socket and RCA jack cab repair. Other than that, operation has been checked with AC 100 to 117 V. (*This model does not have a top lid) Accessories: no accessories Main specifications: vacuum tube 12AX7 x 4, 12X4 line input 5 system phono 1 system (MM) pre-out 1 system W385 x H134 x D230 mm 7 kg
- description
- Disposal prices have been reduced. Member discounts do not apply. 2023/3/22 sales price 148,000 yen. ※There is a slight sound even when the right channel or voll is narrowed down the most, but this is the current situation. Maintained! Direct tube 3A5 control amplifier designed by Mr. Atsushi Arata, who is familiar with the tube kingdom. It seems that it was used in the audition reference preamp for the Gukyu Kingdom magazine. Due to the nature of the vacuum tubes used, they are easily affected by external vibrations, so we recommend installing them in places where there is little vibration. There is a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2023.3.22 maintained (right channel vacuum tube replacement, anti-vibration material removal switch, looseness, tightening, nut replacement, RCA jack, cleaning, sound check for each input and output.) Accessories: power cable Main specifications: 3 input lines W430 x H80 x D230 mm 6.5 kg (actual measurement)
- description
- A reprint of Marantz's famous model 7. In addition to the good graininess of the sound and the glossy and rich sound quality, the excellent quality of the mid-range is brilliantly inherited. You can enjoy a feeling that transcends ages and genres. Serial F020533 (Atsushi Takasaki) Maintenance information：2023.3.24 sound output confirmed Accessories: instruction manual, power cord Main specifications: vacuum tube used 12AX7×6 W455×H178×D261mm 8kg
Manufacture:K.A.LAB
Price: JPY 31,818 Sold Out
- description
- *Currently on sale. A control amplifier dedicated to K.A.Lab's tubular line that hasn't arrived easily. There is stickiness and richness in the mid range, and the tuning is easy to listen to. The cost performance is high. If you have been looking for it, please take this opportunity! There are thin circular stains on the exterior, dullness, and top plate (Kobayashi Hitoshi) Maintenance information: 2023.3.20 operation confirmed Accessories: power cable Main specifications: vacuum tube used 59EX9×2 6X4WA ×1 W330 × H95×D280mm 6.26 kg (actual measurement)
Manufacture:McIntosh
Price: JPY 543,636 Sold Out
- description
- Maintenance has been completed, including replacing the deteriorated capacitor with a BlackBeauty capacitor! The original C22 is a famous machine admired by enthusiasts. The thick, soft, and extruded, strong tone is a pleasant tone that can only be enjoyed at Old Macin. It has a rich tone centered on the middle range with a high concentration, and makes a sound full of realism. The exterior is dull and has small scratches due to aging (Kobayashi Hitoshi) Maintenance information: 2023.3.13 maintenance (missing bottom foot added, oil capacitor replaced with 0.01 μF BlackBeauty, electrolytic capacitor 40 μF and others replaced, resistor 1/4 W, short pin added, input ground protection treatment, vacuum tube socket and RCA jack cab repair. Operation has been checked with AC 100 to 117 V (OUT LEVEL on the top surface has been narrowed down to prevent sound leakage when volume is minimal.) Accessories: none Main specifications: 4 input systems, 2 phono systems, frequency characteristics 20 Hz to 20 kHz (±0.5 dB), SNR 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
- description
- Drastic price cut 2023/3/10 sales price 230,000 yen manufacturer maintenance completed! It is a preamp that combines a modern sense of speed while also having the moisture unique to vacuum tubes. The exterior design is inspired by a vintage LUXMAN model, but the sound quality is a modern sound that feels sharp and fresh. It is a versatile type that covers a wide range of music genres. Serial G50400613B (Takasaki Atsushi) Maintenance information: 2023.3.10 manufacturer maintenance completed (power circuit (B power) fuse resistor replaced due to disconnection, PHONO equalizer circuit vacuum tube (V2) replacement due to poor operation, inspection of other parts, operation test OK) Accessories: remote control, manual, power cord, original box Main specifications: 1 input phono system (MM/MC) line 4 systems 2 output systems W400 x H169 x D307 mm 13.5 kg
- description
- The price has been reduced! 2023/3/5 sales price 698,000 yen Furen regular imported product. OCTAVE's vacuum tube and transistor hybrid preamp. While it has the warmth unique to vacuum tubes, the sound is extremely clear and easy to see. The high texture in the mid to high range and the high resolution over the entire range are particularly impressive. By adopting an external power supply unit, it is designed to reduce noise to the extreme, so you can enjoy music comfortably. The fact that it has a gain switching function and can be applied to any power amplifier is also attractive. *The remote control is a replacement. There are small scratches and dullness on the exterior. Serial PSE4051 (Satoshi Yonejima) Maintenance information: 2023.3.5 operation confirmed Accessories: replacement remote control, power cable Main specifications: Vacuum tube preamp amplification degree (high) 17.5 dB amplification degree (low) 9.5 dB frequency characteristics 3 Hz to 500 kHz (1.5 dB) 2 hot specification preamp section weight 10.0 kg preamp section dimensions H435 x H147 x D460 mm power supply unit weight 4.0 kg power supply unit dimensions W180 x H100 x D280 mm
- description
- *LINE exclusive model. This is a QUAD control amplifier with a modern design. The characteristic of the sound quality is that it brings out the thickness of the sound with a bouncy texture even when it is simple and straightforward. A high signal-to-noise ratio is achieved with a simple configuration by adopting a dual triode 6111WA as the central control device. The exterior has a feeling of use such as dullness (Kobayashi Hitoshi) Maintenance information：2023.3.7 operation confirmed Accessories: power cable Main specifications: Vacuum tube used 6111WA x 1 (double triode) LINE input/RCA x 5 system, TAPE input/output/RCA x 2 system Unit, W300 x H88 x D125 mm weight 3.4 kg
- description
- The price has been reduced. 2023/2/16 sales price 398,000 yen maintenance completed. A replica model that faithfully reproduces the famous Model 7 from yesteryear at Marantz's North Carolina plant as faithfully as possible. The glossy mid-high range with a high sense of transparency has been firmly inherited, and you can enjoy the perfect balance between good cuts and thickness unique to 7. The cabinet is fixed on the bottom (Sasaki Shota) Maintenance information: 2023.2.16 Maintained (vacuum tube 12AX7 deterioration replacement. (Front lamp defect replacement, vacuum tube shield case cracked replacement, fuse holder replacement, fuse 2A → 0.63A replacement, input ground reinforcement repair, RCA jack and vacuum tube socket caress repair ※ others with AC100V) Accessories: power cable Main specifications: 12AX7/6 vacuum tubes used, W391 x H155 x D261 mm, 5 kg
- description
- Maintenance has been completed, such as replacing 15 capacitors! Original Model 7 with serial 13178. You can enjoy the deep, exquisite balance between the glossy mid-high range tone with a high sense of transparency. For analog fans, it's a model that's been over half a century since it went on sale, but it's still one they admire. Please enjoy the glossy and indescribable atmosphere (Takasaki Atsushi) Maintenance information: 2023.2.15 maintained (vacuum tube 12AX7 defective replacement/balance and main volume disassembly, cleaning and repair · subchassis rubber pad detachment replacement 3 pieces · block capacitor 20 μF × 3 other defects and deterioration replacement 2 bottles · electrolytic capacitor 100 μF other deterioration replacement 4 bottles · oil capacitor 0.01 μF vitamin etc. Inq→Blackcat replacement 8 tubes · resistor 1/2W deterioration replacement 4 · side pads Deterioration replacement, 4 additional short pins, vacuum tube socket and RCA jack cab repair. *Operation has also been checked with AC 100 to 117 volts. *The main volume has been replaced by Allen Bradley by another company (narrowing down the OUT LEVEL will bring it closer to the original curve)) Accessories: manual copy Main specifications: tube type control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, weight 7.5 kg
- description
- The price has been reduced! 2023/2/11 sales price 298,000 yen maintenance completed! Line-only model. A hybrid control amplifier that became the first work and masterpiece of Hovland, which made a name for itself with MUSIC CAP, a masterpiece of audio capacitors. It has a beautiful appearance, a flat and warm sound, and a sense of silence that makes you feel amazed. Starting with the attenuator volume with 31 silver contacts, the handmade construction that makes you stunned even when you look at the interior is also attractive. Authentic Akka product. (Mizusaki Ryo) Maintenance information: 2023.2.11 maintained (complete connector replacement, lamp replacement volume, balance, function switch cleaning, contact grease application, light guide plate removal, cleaning position adjustment. The interior and exterior of each input/output check were cleaned. The mute time after powering on is approximately 30 seconds. The balance volume cannot be squeezed out (specification)) Accessories: instruction manual, power cord Main specifications: analog input/unbalance (RCA) 8 analog output/unbalance (RCA) 2 tape output/unbalance (RCA) 1 system vacuum tube using 1 system 12ax7 x 2/12AT7 x 1 size W464×H128 × D427mm 12.2 kg
Manufacture:McIntosh
Price: JPY 480,000 Sold Out
- description
- Comes with wood cabinet! Refreshing maintenance has been completed by replacing 14 resistors, etc.! The original C22 is a famous machine admired by enthusiasts. The thick, soft, and strong, extruded sound is a comfort that can only be enjoyed at Old McKinn. It has a rich tone centered on the middle range with a high concentration, and makes a sound full of realism. There is a feeling of use such as dullness, rust, and slight dirt on each VOL. Serial 64A32 (Takasaki Atsushi) Maintenance information: 2023.2.9 Maintained (· Each switch and selector contact defect repair · switching noise improvement measures → 1/4 W additional 6 resistors · 8 resistors 1W and 1/2 W noise exchanges · 2 side lamp lights off replacements · vacuum tube 12AX7 deterioration replacement · RCA jack and vacuum tube socket recessing repair ※ operation checked with AC 100 to 117 V as a countermeasure against sound leakage at minimum volume, out of the top surface as a countermeasure against sound leakage at minimum volume LEVEL is narrowed down.)) Accessories: wood cabinet Main Specifications: [Main Unit] Vacuum Tube Preamp Input 4 Systems Phono 2 Systems W406 x H138 x D330 mm 7.3 kg
Manufacture:McIntosh
Price: JPY 227,273(pair)Sold Out
- description
- Maintained! The one-sided ch is a rare model called a mass-produced prototype. Comes with a power supply unit so you can use it right away. You can change the equalizer curve, which is a must-see for old record fans. An early Macintosh tube mono preamp. Please enjoy the honest and rich Old McKin sound. There is rust, dullness, and a feeling of use due to aging (Murakoshi Yoichi) Maintenance information: 2023.1.28 maintenance (power supply circuit change and rectifier tube 6V4 addition. Block capacitors 30/30/20 μF x 2, electrolytic capacitors 50 μF 3 x 2, resistors 1W and 1/2W 2 x 2 are replaced. Short pin added, vacuum tube socket and RCA jack cab repair. Serial No. 2441 0.033 μF oil capacitor and 6 others, main volume, resistor 1/2 W replaced. Operation has also been checked with AC100V (this model is a mass-produced prototype on one side, so the internal circuit and parts arrangement etc. are different). Accessories: power supply unit Main specifications: Vacuum tube with LINE phono (MM) input 12AX7 x 3 main body W280 x D190 x H110 mm power supply unit W181 x H116 x 153 mm
Manufacture:Mcintosh
Price: JPY 408,182 Sold Out
- description
- Disposal prices have been reduced. Member prices are not applicable. 2022/12/29 sales price 498,000 yen maintenance completed! This is a rare early C20 that has been refreshed by undergoing maintenance such as replacing capacitors. The tone is thick and soft to the touch unique to the Old Mackin, and it vividly depicts music in the mid to high range with a different luster from the C22. The exterior has rust, small scratches, stains, etc. appropriate for the model year (Oikawa Tetsuji) Maintenance information: 2022.12.29 Maintained (main volume terminal defect repair ※ other operation checked (about 1 minute after turning on the power, a small amount of dust will come out due to the effects of charging and discharging the capacitor.) 2022.12.21 Maintained (main volume disassembly, cleaning, repair, oil condenser 0.022 μF, etc., replaced with Blackcat and Cornell dubilier (green) 14, block capacitors 20 μF x 4, etc., deterioration replacement 2, resistors 1W and 1/2 W deterioration replacement, 6 vacuum tube sockets and RCA jack cab repairs (*Operation has also been checked with AC 100 to 117 V) Accessories: none Main specifications: vacuum tubes used 6X4, 12AX7, 12AU7 dimensions W390 x H146 x D315 mm, weight 8.3 kg
Manufacture:ACROSOUND
Price: JPY 116,364 Sold Out
- description
- Maintained! Rare Acrosound tube control amplifier. The deep, deep, and muscular sound quality is exactly like a 50s US tune. If you look inside, the large selenium and careful mono structure are quite eye-catching. JAZZ is particularly cool! There is a feeling of use such as dullness and scratches on the exterior. *Noise may occur when the switch, volume, etc. are operated immediately after the power is turned on (Kobayashi Hitoshi) Maintenance information: 2023.1.17 Maintained (vacuum tube socket replacement, AC cord replacement, AC outlet terminal blocked at one place, rear panel FM MULT volume replacement, tone, main volume contact cleaning) Accessories: none Main specifications: Vacuum tube used: 7199 x 2, 7247 x 2 input phono x 2 (78, LP, RIAA with equalizer switch), AM, FM, AUX, tape, microphone input W350 x H113 x D170 mm 3.5 kg (actual measurement)
Manufacture:marantz
Price: JPY 361,818 Sold Out
- description
- The remodeled part has been restored to its original form and refreshed maintenance has been performed! Kit version of the famous instrument model 7. It is a model that appeared to commemorate the 25th anniversary. It has almost the same structure as the original, and as a vacuum tube preamp, you can hear a slightly different tone from other models. I cleaned it, but there are stains left on the panel. *The OUTPUT LEVEL on the back has been squeezed out to bring it closer to the original curve. We recommend that you use it as is. Serial F030080 (Itsuro Mizushima) Maintenance information: 2023.1.14 maintenance (power transformer cut core → replacement to original and power circuit changed to original, vacuum tube 12AX7 · resistor 1W replacement, gag error countermeasures → 1/2W resistance added, short pin added, vacuum tube socket and RCA jack cab repair, etc. Operation checked with AC100V ※ In order to bring the volume curve closer to the original, OUT LEVEL on the back has been narrowed down ) Accessories: wood cabinet Main specifications: kit model tube type control amplifier input line 4 systems, TAPE1 system, PHONO (MM) 2 system, MIC 1 system vacuum tube 12AX7 x 6 W453 x H185 x D260 mm 7.9 kg
Manufacture:FX-AUDIO
Price: JPY 2,727 Sold Out
- description
- FX-AUDIO brand vacuum tube line preamp. Incorporating technology cultivated in successive models, it drives well even though it is small. Can be driven by a 12V AC adapter (Fujisawa Yukishi) Maintenance information: 2023.1.15 operation confirmed Accessories: none Main specifications: W98 x H33 x D99 mm (excluding protrusions) 279 g
- description
- It is a preamp that combines the moisture unique to vacuum tubes while also having a modern sense of speed. The exterior design is inspired by a vintage LUXMAN model, but the sound quality is a modern sound that feels sharp and fresh. It is a versatile type that covers a wide range of music genres. The exterior is good with no noticeable scratches. Serial G610R0068 (Satoshi Yonejima) Maintenance information: 2023.1.6 operation confirmed Accessories: remote control, instruction manual, power cord, original box Main specifications: 1 input phono system (MM/MC) line 4 system output 2 system using ball dimensions W400 x H169 x D307 mm weight 13.5 kg
- description
- A small control amplifier for the Sanei Denpa vacuum tube amplifier kit Aralgand series line. Use an output transformer to easily drive a power amplifier. There is a REC OUT terminal (Murakoshi Yoichi) Maintenance information: 2022.12.27 sound output confirmed Accessories: power cord Main specifications: Vacuum tube used ECC82 × 4 input 4 systems W290 × H160 × D180 mm 4.3 kg
- description
- Maintained! ORIGINAL MODEL 7. You can enjoy the deep, exquisite balance between the glossy mid-high range tone with a high sense of transparency. For analog fans, it's a model that's been over half a century since it went on sale, but it's still one they admire. Please enjoy the glossy and indescribable atmosphere. Serial 7-20126 (Kimiya Miura) Maintenance information: 2022.12.27 Maintained (each switch and selector contact defect repair. Balance disassembly cleaning repair. Low pressure selenium deterioration countermeasures → 4 additional diodes. 4 1W resistors replaced. 2 replacement short pins. Vacuum tube socket and RCA jack recalibration repair *Operation has also been checked with AC 100 to 117 V (please do not change the order of vacuum tubes as much as possible (noise levels etc. are optimized)) Accessories: no accessories Main specifications: tube type control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, weight 7.5 kg
- description
- Maintained! An attractive preamp with a glossy, shadowy expression, and a sound that makes you feel the high level of musicality. Equipped with an original EAR boost transformer designed by Pallavicini for MC cartridges, it is a product where you can enjoy vivid analog sound quality. Scratches and corrosive spots on the front panel and knob appear (Daiki Goto) Maintenance information: 2022.12.14 Maintained (operation check, internal inspection, cleaning) Accessories: power cable, instruction manual Main specifications: 4 line inputs & 1 phono input system, 1 balanced input terminal via a transformer PHONO MM/MC compatible W390 x D330 (including terminals) x H105 mm 10 kg
- description
- *Currently on sale. 115V specification (operation confirmed at 100V). Tube preamp with phono equalizer. It is suitable as an introduction to vacuum tube amplifiers. MM/MC compatible, great for analog users (Itsuro Mizushima) Maintenance information: 2022.12.11 sound output confirmed Accessories: power cord, instruction manual Main specifications: 12AU7/2 vacuum tubes used, W252 x H73 x D270 mm, 3.1 kg
- description
- A vacuum tube type control amplifier designed so that the potential of the entire audio device can be demonstrated. The most standard basic amplifier circuit for vacuum tubes was improved using a method unique to McCton, and it is the top model of McCton's preamp at the time. The exterior has front scratches and dents. Serial 9H05 (Miura Kimiya) Maintenance information: 2022.12.3 operation confirmed Accessories: power cable Main specifications: Vacuum tube used exclusively for spherical control amplifiers Philips ECG/5814A × 8 W470 × H150 × D370 mm 15 kg
- description
- It is a preamp that combines the moisture unique to vacuum tubes, yet has a modern sense of speed. The exterior design is based on the image of a vintage LUXMAN model, but the sound quality is a modern sound that feels sharp and fresh, and it is a versatile type that covers a wide range of music genres. Serial G610R0068 Generally good (Katsutsugu Hiura) Maintenance information: 2022.12.3 sound output confirmed Accessories: remote control, instruction manual, power cord, original box Main specifications: Input phono 1 system (MM/MC) line 4 system output 2 system used ball dimensions W400 x H169 x D307 mm Weight 13.5 kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
