There is no label, so it is inexpensive. The consumer model tweeter unit used in the L300. Compared to the 2405 aluminum diffuser, this model of acrylic diffuser has a sweet and clear JBL sound. It is a character that blends in naturally without compromising the taste of the company's system (Shota Sasaki)
Maintenance Information: 2022.8.16 Maintained (diaphragm mounting adjustment. DCR (A5.6ohm diaphragm scratch pear), DCR (B6.4ohm diaphragm scratch pear))
Accessories: none
Main specifications: Alnico magnet 8Ω Allowable input 20W Frequency characteristic 6,500 Hz to 21,500 Hz Crossover 6,500 Hz Sound pressure level 105dB Diameter 98mm Depth 83mm 2.3 kg/ unit
A popular Pioneer ribbon tweeter. The golden combination of beryllium diaphragms and Alnico magnets. In addition to correcting the sound quality of the ultra-high frequencies, the expansion of spatial expression, and the wide sound field feeling can be experienced prominently with classical sources. The exterior has dullness and small scratches. Serial 80138 (Satoshi Yonejima)
Maintenance info: 2022.8.13 oscillator test good
Accessories: instruction manual, pedestal, gasket, screws
Main specifications: Input impedance 8Ω Playback frequency band 5,000 Hz to 120,000 Hz Maximum input 100W Output sound pressure level 97.5dB Crossover frequency 5,000 Hz or more Dimensions W134 × H89 × D179 mm Weight 2.6 kg
A horn type tweeter that was also mounted on the CP93824 studio monitor speaker made by OPTONICA. Similar to its appearance, the powerful straight treble and the sense of sound pressure unique to high efficiency are attractive. The exterior has many rust and dents of the age. (Satoshi Yonejima)
Maintenance info: 2022.8.15 oscillator test good
Accessories: No accessories
Main specifications: Horn type tweeter Frequency band 2,500 to 20,000 Hz Impedance 8Ω Maximum input 60W Output sound pressure level 113dB/W/m Magnetic flux density 20,000 gauss VC diameter 3.81 cm 4.1 kg
A popular Pioneer ribbon tweeter. The golden combination of beryllium diaphragms and Alnico magnets. In addition to correcting the sound quality of the ultra-high frequencies, the expansion of spatial expression, and the wide sound field feeling can be experienced prominently with classical sources. The exterior has dullness and small scratches. * The pedestal is out of stock. Serial 89847 (Satoshi Yonejima)
Maintenance information: 2022.8.13 Oscillator check OK
Accessories: instruction manual, gasket, screws
Main specifications: Input impedance 8Ω Playback frequency band 5,000 Hz to 120,000 Hz Maximum input 100W Output sound pressure level 97.5dB Crossover frequency 5,000 Hz or more Dimensions W134 × H89 × D179 mm Weight 2.6 kg
The price has been reduced! 2022/3/22 Selling price 5,000 yen* Currently sold item. TB soft dome tweeter The high range that extends to 25kHz at a reasonable price is attractive. Why don't you easily play with making 2-way speakers, etc.? The exterior is dusty and dull (Satoshi Yonejima)
Maintenance info: 2022.3.22 oscillator test good
Accessories: instruction manual, original box
Main specifications: Output sound pressure level 90db Impedance 6Ω Playback frequency band 775Hz to 25kHz Weight 0.08kg
A rare black type TANNOY domed super tweeter is in stock. Equipped with a high-pass filter, it demonstrates the best performance in combination with the Prestige series such as the Westminster Royal and Canterbury. You can experience a dramatic improvement in the sense of the sound field. There are small scratches on the exterior. Serial 532591 (Miura Kimiya)
Maintenance information: 2022.8.3 operation confirmed
Accessories: instruction manual, original box, pedestal, banana plug
Main specifications: Efficiency 95dB 8Ω Cutoff frequency 14kHz・16kHz・18kHz Cutoff frequency ~ 100kHz W150×H100×D162mm (including 3-point support base) Per weight 1.2 kg (including 3 point support base)
The price has been reduced. 2022/3/21 Selling price 69,800 yen* If you make a sound at a high volume, distortion will occur due to resonance in a certain band, but it will be handed over as it is. Equipped with a large wave panel and a dedicated network. This is the value model of the CLT-5. It is delicate and creates a sense of transparency and tightness. It is an easy-to-use unit that can be connected to the speaker as it is. appearance, dullness. There is a small wound (Hitoshi Kobayashi)
Maintenance information: 2022.3.20 Sound output confirmed
Accessories: manual, connection cord
Main specifications: Wave system flat panel speaker impedance 4Ω W162 × H170 × D150 mm Weight 2.2 kg
* Currently sold item. A cone-shaped tweeter provided by a speaker repair company located in Minnesota. It has a jarring sound quality without being flashy. There is a feeling of use such as solder marks on the terminals (Yoichi Murakoshi)
Maintenance information: 2022.7.29 Sound output confirmed
Accessories: original box
Key Specifications: Frequency Range 2000-15,000 Hz Rated Power 50 Watts Impedance 8Ω Sensitivity 90dB Voice Coil Diameter 0.75" (19mm) Outer Dimension 4.21" (107mm) Cutout Dimensions 2.95" (75mm) Threaded Hole Diagonal 3.94" (100mm)
*1 bottle only Hypersonic horn tweeter made by University The short horn made of aluminum makes it easy to pull out and has a tasteful sound that is attractive. There is a feeling of use corresponding to the year such as small scratches and screw fastening marks (Yoichi Murakoshi)
Maintenance information: 2022.6.25 Sound output confirmed
Accessories: none
Main specifications: Crossover 3,500 Hz Maximum input 25W 8Ω Dimensions W153 × H85 × D167 mm 1.2 kg
*The tweeter cover is out of stock. The deteriorated exterior has been removed, but it is inexpensive because stickiness remains. Dome-shaped super tweeter equipped with a high-pass filter. By adding it to the speaker, the sound separation improves, and it moves lightly (Yoichi Murakoshi)
Maintenance information: 2022.7.16 Sound output confirmed
Accessories: felt
Main Specifications: Unit/25mm Aperture (24K Evaporation Gold Diaphragm) /Neodymium Magnet Efficiency 93dB 8Ω Cutoff Frequency/14KHz/16KHz/18KHz Cutoff Slope/18dB/Oct High Pass Level Adjustment 3 Steps (85dB/89DB/93DB) Frequency Characteristics Cutoff Frequency ~ 100kHz W130×H100×D170mm 0.8kg
There is no problem with the operation, but since it is cheap, it is passed as it is It is a soft dome-shaped tweeter that employs a diaphragm with a cloth base and a special braking material applied to it. The diaphragm aperture is 25mm, and since it has almost standard dimensions, it is easy to obtain excellent results in terms of characteristics such as playback frequency band, output sound pressure level, and allowable input. The exterior is dull and has small scratches (Kimiya Miura)
Maintenance info: 2022.7.19 Operation confirmed
Accessories: No accessories
Main specifications: Dome tweeter aperture 25mm Impedance 8Ω Playback frequency band 2,500 Hz to 22,000 Hz Output sound pressure level 90dB Input 40W Baffle hole diameter 74mm Magnet Weight 250g total weight 570g
ONKYO horn type tweeter The combination of an ultra-hard duralumin diaphragm and an aluminum hollow-out horn enables outstanding high-frequency reproduction. Rust floating, corrosion, and scratches due to aging are seen as a whole (Daiki Goto)
Maintenance info: 2022.7.20 Operation confirmed.
Accessories: original box, instruction manual
Main specifications: Horn type tweeter caliber 73mm Impedance 8Ω Playback frequency band 3000~20000Hz Output sound pressure level 109dB Input 30W Weight 1.9kg
The price has been drastically reduced! 2022/7/4 Selling price 118,000 yen* It is cheap because it is in poor condition. Murata Manufacturing's ceramic super eater. The natural resonance frequency is set higher than the regeneration band by spherical piezoelectric ceramics, and high followability of the diaphragm to the input signal is realized. It has excellent transient characteristics and enables delicate and immersive sound reproduction. Compatible with a wide range of speakers. There is a float on one side plate and a slight dent on the terminal. Dullness and thread can be seen on the exterior. Serial A1025/A1026 (Satoshi Yonejima)
Maintenance Info: 2022.7.4 Sweep Test Good
Accessories: case
Main specifications: 15kHz to 100kHz 90dB 8Ω Diameter 65mm x Length 110mm 1.1kg
It is inexpensive because there are collapse marks on the corners. Super tweeter with built-in network. You can select where to connect the high frequencies from the three types of inputs. Simply place it on top of a regular speaker and connect it as it is to use it. Bright, clear highs and carefree tones are the best match for JBL speakers (Shota Sasaki)
Maintenance Info: 2022.7.8 Sweep Tested
Accessories: none
Main specifications: 25mm sintered carbon graphite dome tweeter playback frequency band FC to 70kHz crossover 12kHz/16kHz/22kHz impedance 5Ω sound pressure level 90dB Dimensions W190 × H130 × D130 mm Weight 1.3kg/book
High efficiency horn tweeter It boasts a high efficiency that has exceeded 100db, which is valuable in recent years. If you are using a high-efficiency backload horn, you should pay attention to it. The delicate and sharp sound quality is attractive. There is overall dullness and fading (Fujisawa Yukishi)
Maintenance information: 2022.7.6 operation confirmed
Accessories: stand
Main specifications: 8Ω 40W 108dB frequency band 4-30kHz crossover frequency 5kHz 70×102mm 1.1kg
A professional tweeter from JBL. Since it is designed to make sound fly far away, the sound quality is solid and straight compared to the company's consumer model 077. It supports finishing the mid and high frequencies with a vivid and firm low range sound (Shota Sasaki)
Maintenance Information: 2022.7.5 Maintained (open the bar, unsolder the diaphragm wiring, unscrew the screws and replace the broken terminals with stock parts. Assemble as it was and check the sound output. (On the other side, check the screw part and check the sound output.)
Accessories: none
Main specifications: Horn type tweeter impedance 16Ω Playback frequency band 6,500-21,500Hz Crossover 7kHz Efficiency 105dB W100×D84mm 3kg/book (actual measurement)
* Currently sold item. Yamaha's popular horn type tweeter. The sound omission is good, and it has a crisp impression. It has a clear outline without moisture, and is characterized by a stretchy sound. It is recommended for high-frequency correction and for those who want to produce the sound of cymbals and pianos firmly. The appearance has a feeling of use such as dullness. Serial 75786 75820 (Asaine Tomoho)
Maintenance information: 2022.6.24 Operation confirmed (bandwidth check good)
Accessories: Pedestal connection cable
Main specifications: Frequency characteristics 3kHz to 20kHz 8Ω 109dB W78 × H78 × D87 mm 1.3 kg/unit (not including stand)
* Currently sold item. Comes with a flange for baffle mounting! A diffusion horn tweeter used for the high frequencies of the Scepter E-603A and E-804A. It plays a delicate sound with fine expressiveness. You can't feel the tightness peculiar to the horn type, and it's a tone that you won't get tired of listening to. Overall, there are a lot of wounds (Fujisawa Yukishi)
Maintenance Info: 2022.6.23 Sweep Tested
Accessories: none
Main specifications: 8Ω 102dB maximum input 30W 2,500Hz to 20,000 Hz recommended crossover 2,500Hz W127 × H125 × D143mm 3kg/unit
A tweeter with high cost performance that you can easily try out. The bandwidth is wide and easy to use. This model is recommended for self-made people who want to add sharpness to the sound or try 3WAY. The exterior has dullness and oxidation (Satoshi Yonejima)
Maintenance info: 2022.6.26 oscillator test good
Accessories: No accessories
Main specifications: Horn type tweeter frequency band 4,000 to 30,000 Hz recommended crossover 5kHz 8Ω 108dB 1kg/1
A tweeter unit that was also used in the HS-1500, which adopted a cascade horn. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2022.6.25 sound output operation confirmed
Accessories: none
Main specifications: Output sound pressure level 106dB/W/m 8Ω Playback frequency band 2.2kHz to 15kHz FO2.150Hz Weight 3.3kg
Comes with a pedestal. A popular tweeter from FOSTEX. The instantaneous sound quality of the alnico magnet is crispy and tight and has a very sense of speed, and the sound quality is natural and not too assertive, so it is a model that can be used widely. There are small wounds (Oikawa Tetsuji)
Maintenance information: 2022.6.21 operation confirmed
Accessories: pedestal
Main specifications: Alnico magnet Impedance: 8Ω Playback frequency band: 2,000 to 25,000 Hz Recommended crossover frequency: 5kHz or more (-12dB/oct.) or more Diameter 99× 137.2mm Weight: 4.7kg
The price has been reduced! 2022/5/16 Sales price 79,800 yen A classic tweeter that has been adopted by many famous JBL speakers. The sound is dry and smooth, and the vivid reality of cymbals and wind instruments is the unique appeal of this model. The overall appearance is noticeable dullness, and there are other chips and dirt on the plate (Ryo Mizusaki)
Maintenance information: 2022.5.16 sound confirmed
Accessories: none
Main specifications: Horn type tweeter unit Alnico magnet 8Ω crossover frequency 2,500 Hz allowable input 20W 2kg/book
* It is cheap because the horseshoe ring is out of stock. A classic tweeter that has been used in many famous JBL speakers. The sound is dry and smooth, and the vivid reality of cymbals and wind instruments is the unique appeal of this model. The appearance may include stains due to oxidation. Serial 77811/88345 (Satoshi Yonejima)
Maintenance Information: 2022.3.25 Oscillator check OK
Accessories: No accessories
Main specifications: Horn type tweeter unit Alnico magnet 8Ω crossover frequency 2,500 Hz allowable input 20W 2kg/book
* Since it is cheap, it will be handed over as it is. FOSTEX dome-shaped tweeter Why don't you try making your own 2-way speakers? Mostly good (Yoichi Murakoshi)
Maintenance information: 2022.6.12 sound confirmed
Accessories: original box, instruction manual
The ribbon tweeter mounted on the Pioneer system component speaker S-X77 is in stock. The unit can be rotated 90 degrees and can be placed vertically or horizontally. Detailed specs are unknown (Shota Sasaki)
Maintenance Information: 2022.6.10 sweep test OK
Accessories: nothing
Main specifications: 0.3 kg/1 piece (actual measurement)
A classic tweeter that has been used in many famous JBL speakers with a self-made pedestal. The vivid reality of cymbals and wind instruments with a dry, smooth sound is unique to this model. There is a slight dullness in the horn part (Yosuke Kojima)
Maintenance Information: 2022.5.28 Operation confirmed
Accessories: self-made pedestal
Main specifications: Horn type tweeter unit Alnico magnet 8Ω crossover frequency 2,500 Hz allowable input 20W 2kg/book
Electro voice's finest horn-shaped tweeter. The deluxe model horn of the T35 is a diffraction type unique to the Electro Voice, which is slightly larger than the T35. A phenolic diaphragm with silk attached to the core material, and an Alnico V magnet comparable to a squawker is adopted for the magnetic circuit. Green felt is affixed (Yoichi Murakoshi)
Maintenance Information: 2022.6.9 Maintenance (magnetic circuit and diaphragm separation, status check. Coil end position and slit position corrected. Coil bobbin, diaphragm stop squeal Magnetic circuit slit cleaning, dustproof. Center adjustment assembly, operation check. (Check the operation by inserting a sine wave from 1KHZ.)
Accessories: None
Main specifications: Playback frequency band 3,500 to 15 kHz Impedance 8Ω Recommended crossover frequency 3.5kHz or more W73 × H191 × D125mm 3.2kg
The tweeter used for ONKYO's bookshelf speaker M88 is in stock. The weight of the diaphragm is very light at 26 mg, and the high rigidity of the material is utilized, and the upper frequency of reproduction extends to 70 kHz. It's a very rare tweeter that arrives alone, so come on this device (Shota Sasaki)
Maintenance Information: 2022.6.10 sweep test OK
Accessories: nothing
Main specifications: 3cm direct drive type tweeter crossover frequency 4,500Hz 1.4kg
* Since there is no label on one side, it is inexpensive. A classic tweeter that has been used in many famous JBL speakers. The sound is dry and smooth, and the vivid reality of cymbals and wind instruments is the unique appeal of this model. Dullness and dirt are noticeable on the whole appearance (Ryo Mizusaki)
Maintenance information: 2022.6.5 operation confirmed
Accessories: none
Main specifications: Horn type tweeter unit Alnico magnet 8Ω crossover frequency 2,500 Hz allowable input 20W 2kg/book
Technics 5cm caliber horn type tweeter Titanium diaphragm and aluminum die-cast horn are adopted, and the sound quality is bright and hard with good cuts. Only one gasket has some dirt and small scratches (Katsuji Hiura)
Maintenance information: 2022.6.5 operation confirmed
Accessories: instruction manual, original box, gasket (only 1 piece), mounting screws
Main specifications: Horn type playback frequency 3,000 to 25,000 W70 × H70 × D60 mm 0.35 kg
* Currently sold products. TAKET's super tweeter with a playback capacity of 150kHz or more. The slide switch for switching crossover was removed from the original BATPRO, fixed it to the A position, and changed the terminals. The rotary switch can switch the efficiency to 5 stages, and it produces natural overtones (Itsuro Mizushima)
Maintenance Information: 2022.5.24 Operation confirmed
Accessories: instruction manual, original box
Main specifications: Maximum rated 35V impedance 8Ω Playback frequency band 18kHz to 150kHz W125×H90×D100mm approx. 260g
* Currently sold products. A rare tweeter is in stock. The sound has a smooth and crisp sound quality that seems to be used for business use, and I feel realistic in the sound. It combines well with vintages such as JBL and GAUSS, and brings out the lower frequencies. Serial 92B4000019 92B4000020 (Mizushima Itsuro)
Maintenance Information: 2022.5.28 Operation confirmed
Accessories: None
Main specifications: W92 × H110 × D101 mm (including dedicated stand) Horn tweeter 8Ω (measured DC value 7.0/6.6Ω) 105dB 5000 ~ 20000 Hz crossover frequency: 7kHz 2kg
The price has been reduced. 2022/5/4 sales price 99,800 yen The highest peak model of the BAT series. Cut the area below 15kHz that can be heard by humans as much as possible, and cut the cover with the main speaker. With a natural sense of spaciousness and a firm strength of the shaft, it has a light impression with good omission. Thick wooden cabinets, brass horns and brass inverted conical spikes ensure rigidity and beautiful form. * Rubber feet are attached (Fujisawa Koshi)
Maintenance Information: 2022.5.4 sweep tested
Accessories: None
Main specifications: Drive system/Bimorph polymer piezoelectric Heil type drive (TAT drive) Maximum rating/100V (However, test signals at 20kHz or higher are up to 20V) *Protection circuit operates for excessive input (power supply (It will return to the original after a few minutes after turning off) Impedance/Infinity ~ 140Ω ~ 28Ω (DC ~ 20kHz to 100kHz) Playback frequency band/18kHz to 150kHz or more (Hile structure and 0.1 μF (Capacitor cuts 18 kHz or less steeply) Maximum output sound pressure/100dB/W/m, 5-stage switching size about 110mm (width) 70mm (height) 100mm (depth not including terminals), 23mm (terminal depth) mass approx. 720 grams
* Currently sold products. It is a stationary tweeter that houses the JBL2405 in a self-made trapezoidal enclosure, and comes with an ATT from FOSTEX. Appearance, dullness, abrasions (Hitoshi Kobayashi)
Maintenance Information: 2022.4.18 Operation confirmed
Accessories: None
Main specifications: Horn type tweeter impedance 16 Ω playback frequency band 6,500 to 21,500 Hz crossover 7 kHz efficiency 105 dB actual measurement W270 × H150 × D207 mm 4.0 kg
Wave tweeter It does not emphasize the high frequencies like a super tweeter, but rather a tweeter that adds missing parts of the sound rise of conventional speakers. The attack sound becomes vivid, and the resolution of the high and low frequencies is also effective. * It is an auxiliary tweeter that operates by wave motion and cannot be used as a standalone tweeter, and does not require a network (Yoichi Murakoshi)
Maintenance information: 2022.5.18 sound confirmed
Accessories: None
Main specifications: W160 × H211 × D185mm 4.0kg
Scan Peak tweeter A beryllium diaphragm is used to create a crisp sound without stagnation. It makes you listen to the high frequencies with a natural texture. Serial 2987-41/2987-59 (Eiji Tamura)
Maintenance Information: 2022.5.18 Oscillator check OK
Accessories: original box
Main specifications: 25mm dome tweeter Fs: 500hz 91.5dB
It is a tweeter that was installed in the LANCER 77, etc., and it makes a light sound with a span span. It's small and easy to handle, so it's recommended for those who want to try making their own. You can easily enjoy the JBL sound. There is a slight feeling of use (Yoichi Murakoshi)
Maintenance Information: 2022.5.9 Confirmed
Accessories: None
Main specifications: cone type tweeter recommended crossover 2or2.5kHz 8Ω screw pitch (diagonal) 115mm W137×D52mm 1.2kg
Comes with original box. A popular Pioneer ribbon tweeter. A golden combination of beryllium diaphragm and alnico magnet. In addition to the sound quality correction of the ultra-high range, the expansion of spatial expression, and the wide sound field feeling can be experienced remarkably with classical sources. Serial 8-9835 (Mizushima Itsuro)
Maintenance information: 2022.4.4 operation confirmed
Accessories: instruction manual, original box, pedestal, gasket
Main specifications: Input impedance 8Ω Playback frequency band 5,000 Hz to 120,000 Hz Maximum input 100W Output sound pressure level 97.5 dB Crossover frequency 5,000 Hz or more Dimensions W134 × H89 × D179 mm Weight 2.6 kg
* It has been changed to an external stainless steel shot put horn like 075. Mounting flanges are not included. Supports making the mid and high frequencies vivid and firm in the low frequencies (Yoichi Murakoshi)
Maintenance information: 2022.4.2 sound confirmed
Accessories: None
Main specifications: Horn type tweeter impedance 16Ω playback frequency band 6,500 to 21,500 Hz crossover 7kHz efficiency 105 dB W100 × D84 mm 3kg/book (actual measurement)
A domed super tweeter with a beautiful design of solid walnut. Equipped with a high-pass filter, in combination with the Prestige series such as Westminster Royal and Canterbury, it delivers the best performance. You can experience a remarkable improvement in the sense of sound field. The appearance has a feeling of use such as dullness. (Nobuyuki Takahashi)
Maintenance information: 2022.4.18 operation confirmed
Accessories: Instruction manual, pedestal, banana plug, level gauge, hard case
Main specifications: Efficiency 95dB 8Ω cut-off frequency 14kHz/16kHz/18kHz cut-off frequency ~ 100kHz W150×H100×D162mm (including 3-point support base) per weight 1.2 kg (including 3-point support base)
A horn type super tweeter that uses a brass equalizer from Fostex. It achieves smooth and high-quality ultra-high frequency regeneration (Yoichi Murakoshi)
Maintenance information: 2022.4.2 sound output confirmed
Accessories: None
Main specifications: Impedance 8Ω Playback frequency band 4~40kHz Output sound pressure level 103dB/W/ (1m) Input 50W Cutoff frequency 39kHz Recommended crossover frequency 8kHz or more Magnet Weight 100g Baffle Opening Dimensions Diameter 61mm Total Weight 780g (actual measurement)
* The impedance is different on the left and right, and there is a sound pressure difference (measured DCR: 8Ω/16Ω) The sound pressure on the 16Ω side is lower, but when I tried to align the sound pressure with the attenuator of the JBL N8000, I felt the difference in hearing It was a pent. A horn-shaped tweeter incorporating a horn hollowed out in an oval shape on the inside. It features a large magnet part that does not match the size of the horn, and it has a dense and powerful sound. It is impressive that the breath sound of the trumpet can be heard firmly even though it was a tweeter (Ryo Mizusaki)
Maintenance information: 2022.4.14 Operation confirmed (sound output check with N8000, there is a sound pressure difference on the left and right)
Accessories: None
Main specifications: Horn type tweeter measured DCR8.0Ω/16Ω W125 × H125 × D120mm 4.5kg
Super tweeter made by Aurum Qantas, which has a reputation for ribbon tweeters. Built-in high-pass filter using Mundorf's M-Cap, etc. Crossover switches between 2 stages, and the gain is adjustable to 5 levels in 1.5dB increments, and is compatible with a variety of speakers. Light abrasions, dullness (Yoichi Murakoshi)
Maintenance information: 2022.4.12 sound output confirmed
Accessories: original box, instruction manual
Main specifications: Ribbon type playback frequency band 10kHz to 40kHz output sound pressure level 92dB/94dB crossover 10kHz, 16kHz switching W114 × H160 × D183mm 2.3kg
* Currently sold items. A horn type tweeter that can perform natural high frequency correction. The wide range of high range extended to 40 kHz has a wide range of uses, and it is an affordable and easy to handle model. Appearance has small scratches and dullness (Satoshi Yonejima)
Maintenance information:2022.4.11 oscillator test good
Accessories: No accessories
Main specifications: Horn type tweeter playback frequency band 4kHz to 40kHz Recommended crossover frequency 4kHz Impedance 8Ω (measured DC value 7.3/7.0Ω) 106dB horn diameter 63mm Screw Pitch 110mm (Diagonal) Plate Dimensions 102 × 102 mm D69mm 1.05 kg
Comes with a dedicated pedestal! Super tweeter with aluminum alloy thick cylindrical horn and ultra-light ring diaphragm. With a well-stretched and tight high range, it is useful for high frequency correction, etc. The appearance is dull and there are small scratches (Satoshi Yonejima)
Maintenance information:2022.4.11 oscillator test good
Accessories: pedestal
Main specifications: Alnico magnet used 8Ω playback frequency band 5kHz to 35kHz output sound pressure level 106dB recommended crossover 7kHz or higher input 50W 800g/1
The price has been drastically reduced. 2022/4/3 Sales price 118,000 yen Consumer model of the company's professional tweeter 2403. It is an elliptical horn type with a ring diaphragm unique to JBL, and the elongation and strength of the treble are very wonderful. If you are feeling lacking in the high range, etc., please come. There are no noticeable scratches (Yoichi Murakoshi)
Maintenance information: 2022.4.2 sound output confirmed
Accessories: None
Main specifications: 8Ω 105dB 5K to 21kHz Alnico magnet adopted W98 × H98 × D118 mm 2.2 kg
The consumer model tweeter unit used in the L300. Compared to the 2405 aluminum diffuser, this model of acrylic diffuser has a sweet and clear JBL sound. It is a character that blends naturally without compromising the taste of the company's system. Serial 62463 62366 (Takasaki Atsushi)
Maintenance information: 2022.4.3 sound output confirmed
Accessories: None
Main specifications: Alnico Magnet 8Ω Allowable Input 20W Frequency Characteristics 6,500Hz to 21,500Hz Crossover 6,500Hz Sound Pressure Level 105dB Diameter 98mm Depth 83mm 2.3kg/book
A popular Pioneer ribbon tweeter. The golden combination of beryllium diaphragm and alnico magnet. In addition to the ultra-high frequency sound quality correction, the expansion of spatial expression, and the wide sound field feeling can be experienced remarkably with classical sources. There are no noticeable scratches. There is no dedicated pedestal (Sasaki Shota)
Maintenance information: 2022.4.3 sweep test good
Accessories: None
Main specifications: Input impedance 8Ω Playback frequency band 5,000 Hz to 120,000 Hz Maximum input 100W Output sound pressure level 97.5dB Crossover frequency 5,000 Hz or more Dimensions W134 × H89 × D179 mm Weight 2.6 kg
※The ring is a horn type, not a horseshoe. A classic tweeter that has been adopted by many famous JBL speakers. It has a dry and clear sound, and the vivid reality of cymbals and wind instruments is unique to this model. There is a little darkening and dullness. Serial 148682 148681 (Takasaki Atsushi)
Maintenance information: 2022.4.3 sound output confirmed
Accessories: None
Main specifications: Horn type tweeter unit Alnico magnet 8Ω crossover frequency 2,500Hz allowable input 20W 2kg/book
A popular horseshoe type. A classic tweeter that has been used by many famous JBL speakers. The vivid reality of cymbals and wind instruments with a dry, clear sound is unique to this model. The exterior is somewhat dull (Yoichi Murakoshi)
Maintenance information: 2022.3.26 sound output confirmed
Accessories: None
Main specifications: 8Ω horn type tweeter unit Alnico magnet crossover frequency 2,500Hz allowable input 20W 2kg/book