※Inexpensive because it is in slightly poor condition. Super tweeter with built-in network capable of playback up to 70kHz. You can select where to connect the high frequency range from 3 types of input. You can use it simply by placing it on top of a normal speaker and connecting it as is. The bright, clear high frequencies and carefree tone are the perfect match for JBL speakers. In addition to the exterior, there is a light float on the front baffle joint surface on one side, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: none
Main specifications: 25mm sintered carbon graphite dome tweeter playback frequency band FC to 70kHz crossover 12kHz/16kHz/22kHz impedance 5Ω sound pressure level 90dB dimensions W190 x H130 x D130 mm weight 1.3 kg
The best model in the BAT series. Cut the area below 15 kHz that can be heard by humans as much as possible, and cut the coverage with the main speaker. It has a natural sense of spaciousness and a firm, strong axle, and a light impression that is easy to remove. Thick wooden cabinets, brass horns, and brass inverted conical spikes are used to ensure rigidity and beautiful form. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: original box
Main specifications: Drive system/bimorph polymer piezoelectric hail type drive (TAT drive) maximum rating/100V (however, test signals at 20kHz or higher are up to 20V) protection circuit operates on excessive input (returns to normal after a few minutes of turning off the power) impedance/infinity ~ 140Ω to 28Ω (DC ~ 20kHz to 100kHz) playback frequency band/ 18 kHz to 150 kHz or more (18 kHz or less with a hail structure and 0.1 μF capacitor (It has been cut steeply) Maximum output sound pressure/100dB/W/m, 5-step switching W110 × H70 × D100 mm 720g
The price has been drastically reduced! 2024/4/25 sales price 118,000 yen ※The horn part and equalizer part have been replaced with brass ones. Comes with a horseshoe ring! 16 ohm specification A straight, carefree, and linear sound. It's great for applying sharp, edgy cymbal sounds and attack sounds. The impression is that the density has increased compared to the 8 ohm specification. The back plate is missing. The exterior has slight paint baldness and oxidation. (YONEJIMA Satoshi)
Maintenance information: 2024.4.25 Maintained (Fram pull-out wire disconnection repair (only repair only the fault location because the Fram drawer line is thin) Fram cleaning. DCR (? /6.5 ohm diaphragm no scratch) DCR (40886/6.6ohm diaphragm no scratch)
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
Comes with a stand. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. There is a feeling of use such as dullness and slight scratches over time (Yamato Yuki)
Maintenance information: 2024.4.16 sweep test good
Accessories: stand
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book (stand not included)
A popular ribbon-shaped super tweeter. Since it has a built-in network and high pass filter, it can be easily added to your system. Compatible with ultra-high frequency playback included in SACD and high-resolution sound sources. Rubber sheet marks remain on the top plate. The exterior has dullness, scratches, etc. Serial HI003337 HI003338 (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: Ribbon-type super tweeter 6Ω playback frequency band 9,000 Hz to 120,000 Hz W100 × H102 × D152 mm 1.3 kg/unit
Onyx ribbon tweeter It has a smooth tone unique to ribbons, and is compatible with European speakers that focus on spatial expression and atmosphere. It also has the advantage of not getting tired of listening, and the piano black finish looks good. The exterior is dull all over, and small scratches are conspicuous. Serial A12541/A12542 (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: Magnetic static supertweeter frequency band 8 to 45 kHz impedance 4 ohms sound pressure level 92 dB crossover 11 kHz/15 kHz 4 steps with attenuator Dimensions W120 x H128 x D130 mm weight 2 kg
※It is inexpensive because there are tar stains. A super tweeter capable of reproducing up to an ultra-high frequency of over 70 kHz. Both output and crossover can be switched in 3 stages. The excellent sound quality and three-dimensional spatial expression typical of JBL are attractive. It supports playback in the ultra-high range of SACD and high-resolution sound sources with plenty of room. ※ Spike holder is not included. The exterior has dullness, discoloration on the back panel, and small scratches. Serial C30391247/C30391248 (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: horn type tweeter built-in high pass filter 16/20/24kHz switching playback frequency band to 70kHz impedance 8Ω maximum input 50W output sound pressure level 95db W190 x H122 x D173 mm 2.1 kg/unit
Includes horseshoe ring A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. There is rust in places (Tomonori Asaine)
Maintenance information: 2024.4.2 operation confirmed
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
Lots of accessories! Pioneer's popular ribbon tweeter. Using lightweight and highly rigid beryllium diaphragms and Alnico magnets, the delicate, high-quality high range is still an attractive gem. Good product with little feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.3.29 sound output confirmed
Accessories: instruction manual, pedestal, original box, protective cover
Main specifications: ribbon tweeter with fuse protection circuit, playback frequency 5,000 Hz to 120,000 Hz, 8 ohms, sound pressure 97.5 dB, maximum input 100 W, rated input 50 W (both 5 kHz, -12 dB/when using an OCT network) W134 x H89 x D179 mm 2.6 kg
A popular professional tweeter used in many JBL systems. This is the 2405 ferrite model. The good sound of extrusion creates an outstanding sense of realism. The sense of speed and sharpness matches well with modern sauces*Since it is built into the pedestal, it cannot be removed (Tomoho Asaine)
Maintenance information: 2024.3.26 bandwidth check confirmed
Accessories: none
Main specifications: horn type tweeter ferrite magnet 8 ohms playback frequency band 6,500 to 21,500 Hz, crossover 7 kHz, efficiency 105 dB, dimensions W117 x D96 mm, weight 2.5 kg
Comes with original box and pedestal! Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It is useful for high frequency correction etc. in a well-stretched, tight high frequency range. There are small scratches and dullness on the exterior. (FUJISAWA KOSHI)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: instruction manual, original box, pedestal
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
The price has been reduced! 2024/3/17 sales price 10,000 yen It's a delicate sound that makes you feel the serious craftsmanship of Technics 8cm caliber vintage tweeter technics. It is also easy to pull out because it uses a horn type. There is a feeling of use such as abrasions and dirt on the inside of the horn (Jun Tamai)
Maintenance information: 2024.3.17 sound output confirmed
Accessories: none
Main specifications: 2 kHz to 20 kHz 8 Ω (measured DC value 7.0 Ω) 99 dB baffle opening diameter 81.5 mm W100 x D98 mm 0.75 kg
Technics' 8 cm caliber vintage tweeter It's a delicate sound that makes you feel the serious workmanship of Technics. It is also easy to pull out because it uses a horn type. There is a slight feeling of use on the exterior, such as small scratches (Tamai Jun)
Maintenance information: 2024.3.17 sound output confirmed
Accessories: original instruction manual box
Main specifications: 2 kHz to 20 kHz 8 Ω (measured DC value 7.0 Ω) 99 dB baffle opening diameter 81.5 mm W100 x D98 mm 0.75 kg
The price has been drastically reduced. 2024/3/17 sales price 1,000 yen. 1 bottle only Unspecified horn tweeter. Conduction was confirmed, and sound was confirmed (Murakoshi Yoichi)
Maintenance information: 2024.3.15 continuity confirmed
Accessories: none
Main specifications: 95 mm in diameter, screw pitch (diagonal): 86 mm, depth: 53 mm
Comes with a pedestal. It has been cut with a condenser and can be used as is. Recommended for correcting high frequencies or for those who want to add high frequencies (Tamura Eiji)
Maintenance information: 2024.3.14 sweep test good
Accessories: pedestal
Main specifications: horn type tweeter playback frequency 5,000 to 50,000 Hz cutoff frequency 2,600 kHz recommended crossover 5,000 Hz or more 8 Ω output sound pressure level 98.5 dB W100 x H105 x D110 mm
This is a rare Jensen horn tweeter. Details are unknown, but the impression is elegant and bright. The exterior has paint peeling and solder residue. (FUJISAWA KOSHI)
Maintenance information: 2024.3.9 operation confirmed
Accessories: No accessories
Main specifications: W185 x H76 x D160 mm 7.0 Ω/7.3 Ω (measured value)
The price has been reduced! 2024/3/8 sales price 79,800 yen Tweeter unit using Altec's multi-seller horn. Although it is not a wide range, you can get Altec sound with a firm and sharp sound image. The exterior has paint peeling and dullness. Serial 391819 (Fujisawa Yukishi)
Maintenance information: 2024.3.8 operation confirmed
Accessories: No accessories
Main specifications: horn type tweeter frequency characteristics 3kHz to 20kHz 35W 8Ω W80 × H55 × D80 mm 0.36 kg
Super tweeter ES-105 using spherical piezoelectric ceramics. Since it has a built-in network, it is designed to be highly convenient and easy to use. The wide sound field, especially the reproduction in the depth direction, is excellent, and it is a super tweeter with a large pocket that is compatible with a wide range of speakers (Mizusaki Ryo)
Maintenance information: 2024.3.8 operation confirmed
Accessories: none
Main specifications: average sound pressure level 90 dB playback frequency band 15 kHz to 100 kHz resonance frequency 105 kHz rated impedance 8 Ω directional forward +/- 45 degrees maximum allowable input 50 w dimensions W90 x H65 x D 118 mm weight 1.1 kg/1 piece
The price has been reduced! 2024/3/2 sales price 23,000 yen*Currently sold. A horn-shaped tweeter that is familiar to the ear. The appeal is that it's easy to read, but it doesn't hit your ears, so you won't get tired of listening. The condition is small scratches and dullness over time, as well as oxidation (Yamato Yuki)
Maintenance information: 2024.3.2 operation confirmed
Accessories: none
Main specifications: horn type tweeter frequency characteristics 2.5 kHz to 22 kHz 8 ohms cutoff frequency 2.3 kHz recommended crossover 3.5 kHz efficiency 105 dB W83 x H83 x D94 mm 1.1 kg
The price has been drastically reduced. 2024/3/1 sales price 298,000 yen A rare Alnico horn type tweeter unit from Onken (Onken). Equipped with an 18 mm, 8 micron thick titanium diaphragm. The high degree of perfection can be seen from the solid, sturdy construction and fresh sound. There is a feeling of use due to blows, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.3.1 sound output confirmed
Accessories: original box, self-made pedestal
Main specifications: horn type tweeter, 8 ohms, output sound pressure level, 105 dB, 7000 to 28,000 Hz, 6 kg
The price has been reduced. 2024/2/23 sales price 16,800 yen Technics 5cm caliber horn tweeter. Using titanium diaphragms and die-cast aluminum horns, it is hard and has bright sound quality with good cuts. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.2.23 Operation confirmed (bandwidth check)
Accessories: none
Main specifications: horn type playback frequency 3,000-25,000 W70 x H70 x D60 mm 0.35 kg
The price has been reduced. 2024/2/23 sales price 24,800 yen with box! It hasn't been in stock in a long time. FOSTEX Horn Super Tweeter FT50H It plays a role in expanding sound and improving the reproducibility of space. There is a feeling of use on the exterior due to small scratches, dullness, etc. ※ There is no bottom plate on one side (Asaine Tomoho)
Maintenance information: 2024.2.23 Operation confirmed (bandwidth check)
Accessories: original box
Main specifications: ferrite magnet impedance 8 ohms frequency band 5000 to 35000 Hz maximum input 50 W output sound pressure 102 dB recommended crossover 7 Khz W60 × H70 × D70 mm
The price has been reduced. 2024/2/18 sales price 16,000 yen. Victor's tweeter. Rust can be seen on the exterior and horn, and a feeling of use such as dullness and corrosion can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.2.17 Operation confirmed
Accessories: none
Main specifications: 8Ω 100W polyimide heat-resistant film base flat voice coil W145 x H88 x D70 mm (actual measurement)
A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. There are rust spots here and there (Oikawa Tetsuji)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: none
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
Dome tweeter This tweeter features a clear and unconventional sound. It's a 2-way or 3-way tweeter that's easy to use. There is a tape mark stain on the back side of the terminal (Sasaki Shota)
Maintenance information: 2024.2.8 operation confirmed
Accessories: original box
Main specifications: 40W 8Ω 2k to 30kHz 90dB baffle opening 9 cm screw pitch (diagonal) 101 mm
Currently sold. FOSTEX Super Tweeter It is an RP system with coils printed on extreme foil film, and you can feel the further realism of stringed instruments and female vocals with highly delicate textures. It is in good condition with no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.2.8 operation confirmed
Accessories: original box, manual
Main specifications: frequency band 3 kHz to 45 kHz 93 dB 8 ohms W75 x H88 x D43 mm weight 155 g
*Currently sold. The company's 3rd generation ribbon tweeter. How about a self-made person? The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2024.2.7 operation confirmed
Accessories: none
Main specifications: 8Ω 95dB 1200 to 40kHz Recommended cutoff frequency 2,000 Hz W70 × H145 × D80 mm 1.1 kg
A pioneer hard dome tweeter that uses a beryllium diaphragm as the diaphragm. It achieves flat characteristics and excellent transient characteristics up to 55 kHz, which greatly exceeds the audible band. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.2.5 operation confirmed
Accessories: none
Main specifications: impedance 8 ohms frequency band 2.5 kHz to 55 kHz maximum input 40 W rated input 20 W output sound pressure level 91 dB body diameter 70 x 82 mm weight 1 kg (cover included)
This aluminum tweeter was mounted on Hitachi's HS-500, which is still popular today. There is no harshness in the treble, and it makes an elegant sound. There is a slight feeling of use such as scuffs and dullness. Serial 91707163 91710378 (Mizushima Itsuro)
Maintenance information: 2024.2.6 operation confirmed
Accessories: none
Main specifications: impedance 8 ohms, rated input, 20 W, playback frequency band, 2 kHz to 20 kHz, crossover frequency 3 kHz or more, W73 x D153 mm, weight 1.7 kg
Isophon vintage tweeter L5964 is now in stock. It is a rare tweeter made in Germany that began to be manufactured in the 1960s, and you can fully enjoy the Isophon/Telefunken sound of that time. The exterior has different colors of felt around the frame, discoloration of corn paper, etc. (Satoshi Yonejima)
Maintenance information: 2024.2.6 oscillator test is good
Accessories: No accessories
Main specifications: 155 x 106 mm caliber, ultra-lightweight cone, fixed edge
*Currently sold. Yamaha's popular horn tweeter. The sound loss is good and the impression is cool. It has a clear outline without humidity, and features a stretchy sound. It is recommended for high frequency correction and for those who want to make a solid cymbal or piano sound. The exterior has a feeling of use such as dullness. Serial 76819, 76854 (Fujisawa Yukishi)
Maintenance information: 2024.2.3 oscillator test good
Accessories: stand, plug
Main specifications: frequency characteristics 3kHz to 20kHz 8Ω 109dB W78 × H78 × D87 mm 1.3 kg/unit (stand not included)
A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. There are scratches on the exterior. Serial 152132/152157 (Tamura Eiji)
Maintenance information: 2024.2.2 oscillator check OK
Accessories: none
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
Siemens cone tweeters are rarely in stock. It reproduces hard, clear, high-pitched sounds typical of Siemens. The exterior is dull, dirty, and oxidized (Tamura Eiji)
Maintenance information: 2024.2.1 sweep check OK
Accessories: none
Main specifications: Alnico V magnet cone tweeter, 5 ohms, playback band, 2 kHz to 20 kHz, diameter 100 x depth 60 mm, 200 g
*It is mounted in a JBL UT-205 enclosure. With a design that matches sensitivity with the company's PW80k, a 2-way system can be constructed without using an attenuator, and by matching the tone, you can select a wide range of crossover frequencies and create your own favorite sound, the unit's guard is defective, and there is a scratch on the front on one side. (FUJISAWA KOSHI)
Maintenance information: 2024.1.30 Operation confirmed
Accessories: No accessories
Main specifications: 20mm soft dome tweeter impedance 8Ω playback frequency band 3kHz to 32kHz output sound pressure level 84dB input 15W recommended crossover frequency 3kHz or higher
A tweeter with a built-in network for Utopia devices. Designed with the motif of the phantom driver tweeter JENSEN MODEL Q. A titanium alloy diaphragm is used to achieve vivid music playback. The exterior is dull. Serial 0117 (Yonejima Satoshi)
Maintenance information: 2024.1.29 sweep test good
Accessories: No accessories
Main specifications: 1,000 Hz to 20,000 Hz
A cost-effective tweeter that is easy to try out. This model has a wide band and is recommended for self-made people who want to try out 3-way, making the sound sharp. The logo plate on the back of the exterior is missing, and there are other threads and dullness (Mizusaki Ryo)
Maintenance information: 2024.1.25 sound output confirmed
Accessories: none
Main specifications: horn type tweeter frequency band 4,000 to 30,000 Hz, recommended crossover, 5 kHz, 8 ohms, 108 dB, 1 kg/1
The disposal price has been reduced. Member discounts are not applicable. 2024/1/24 sales price 168,000 yen*Felt and gauge missing. Since there is a noticeable dent on the upper front of the individual on one side, it is inexpensive. Maintained. A dome-shaped super tweeter with a beautiful solid walnut design. Equipped with a high pass filter, it demonstrates the best performance in combination with the Prestige series such as Westminster Royal and Canterbury. You can experience a drastic improvement in the sound field. The appearance, conspicuous scratches, cracks, slight wrinkles, dullness, etc. on the TW can be seen, and the color of the stand is different on the left and right (Kobayashi Hitoshi)
Maintenance information: 2024.1.24 Maintained (89dB pattern base repair correction earth pattern cleaning correction cleaning on one side ATT on the other side
(Network section Earthland cleaning, pattern correction)
Accessories: stand, instruction manual (copy)
Main specifications: efficiency 95dB 8Ω cutoff frequency 14kHz/16kHz/18kHz cutoff frequency to 100kHz W150 x H100 x D162 mm (3-point support base included) Weight 1.2 kg per bottle (3-point support base included)
*Currently sold. Yamaha's popular horn tweeter. The sound loss is good and the impression is cool. It has a clear outline without humidity, and features a stretchy sound. It is recommended for high frequency correction and for those who want to make a solid cymbal or piano sound. The exterior has a feeling of use such as dullness. Serial 76819, 76854 (Fujisawa Yukishi)
Maintenance information: 2024.1.22 operation confirmed
Accessories: external stand
Main specifications: frequency characteristics 3kHz to 20kHz 8Ω 109dB W78 × H78 × D87 mm 1.3 kg/unit (stand not included)
Beryllium diaphragm dome tweeter Titanium voice coil is used. This is a product that rarely appears. There are some screw marks, but the extent is not bad (Yasuhito Koshihama)
Maintenance information: 2024.1.9 storefront operation confirmed
Accessories: original box, manual
Main specifications: diaphragm aperture 26 mm impedance 8 ohms 2500 to 40,000 Hz efficiency 92 ddB screw to screw distance 108 mm
The price has been reduced! 2024/1/9 selling price 99,800 yen Fostex's popular horn type super tweeter. It is a tweeter full of new technology, equipped with a horn using a special brass alloy for the Alnico magnet. The exterior has dullness and small scratches (Tomoho Asaine)
Maintenance information: 2024.1.9 operation confirmed (bandwidth check)
Accessories: instruction manual stand
Main specifications: horn type super tweeter, 8 ohms, playback frequency, 5 kHz to 38 kHz, 106 dB, recommended crossover, 7 kHz or more, 2.75 kg
※Since there are multiple thin line scratches on the front, it is inexpensive. A super tweeter capable of reproducing up to an ultra-high frequency of over 70 kHz. Both output and crossover can be switched in 3 stages. The excellent sound quality and three-dimensional spatial expression typical of JBL are attractive. It supports playback in the ultra-high range of SACD and high-resolution sound sources with plenty of room. There are line wounds and small wounds (Oikawa Tetsuji)
Maintenance information: 2024.1.3 operation confirmed
Accessories: none
Main specifications: horn type tweeter built-in high pass filter 16/20/24kHz switching playback frequency band to 70kHz impedance 8Ω maximum input 50W output sound pressure level 95db W190 x H122 x D173 mm 2.1 kg/unit
The price has been reduced. 2023/12/29 sales price 99,800 yen ※There is a lot of rust on the horn part, so it's cheap. Comes with a horseshoe frame. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. On the exterior, oxidation can be seen on the horn (Murakoshi Yoichi)
Maintenance information: 2023.12.24 sound output confirmed
Accessories: none
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms (measured 14/14 ohms), crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/book
A horn type tweeter that is an improved model of the JA-0506. An Alnico magnet is used for the magnetic circuit, a precision horn hollowed out of aluminum is used for the horn part, and a V-shaped ring diaphragm with a hard duralumin shape is used for the diaphragm. It's a bright, clear sound that gained popularity along with its design. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.23 sound output confirmed
Accessories: wooden base
Main specifications: horn type tweeter unit Alnico magnet 0.23 kg impedance 8 ohms playback frequency band 3 kHz to 20 kHz recommended usage band 5 kHz or more rated input 1 W maximum input 2 W sound pressure level 109 dB
The price has been reduced. This super tweeter achieved high linearity and response by adopting a high driver tweeter called the Jet Tweeter for the 2023/12/22 sales price of 45,000 yen units. The crossover frequency can be switched between 11 kHz and 15 kHz by replacing the rear speaker terminal. Furthermore, it is equipped with an attenuator for gain adjustment, and the level can be adjusted to +/- 3dB in 4 levels. There are multiple line scratches on the top plate (Sasaki Shota)
Maintenance information: 2023.12.22 operation confirmed
Accessories: none
Main specifications: output sound pressure level: output sound pressure level 92 db (1 w/1 m) frequency characteristics: 8 kHz to 45 kHz (± 3 db)
Impedance: 4 ohms Crossover frequency: 11kHz, 15kHz
Level: 92 dB, 90.5 dB, 89 dB, 87.5 dB (1W/1m) W120 x D130 x H128 mm 2.0 kg
Comes with a dedicated pedestal! A super tweeter that uses an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It is useful for high frequency correction etc. with a well-extended, tight high range range (Mizusaki Ryo)
Maintenance information: 2023.12.16 sound output confirmed
Accessories: pedestal
Main specifications: using alnico magnets, 8 ohms, playback frequency band, 5 kHz to 35 kHz, output sound pressure level, 106 dB, recommended crossover, 7 kHz or more, input 50 W, 800 g/book
Disposal prices have been reduced! (Member discount is not applicable) 2023/12/16 sale price 298,000 yen GOTO luxury tweeter. 16Ω specification By combining a titanium dome diaphragm with a 130mm magnetic circuit, you can enjoy high frequencies that spread naturally and smoothly. The exterior has rust spots and paint peeling due to aging. (YONEJIMA Satoshi)
Maintenance information: 2023.12.16 band check is good
Accessories: no accessories
Main specifications: horn type tweeter unit, impedance, 16 ohms, output sound pressure level, 115 dB, playback frequency band, 4 kHz to 30 kHz, recommended crossover, 5 kHz, diaphragm, titanium, FRP edge diameter 130 x depth 120 mm, 6 kg
Comes with a wooden frame stand! JBL professional tweeters. Since it is designed to send sound far away, the sound quality is solid and straighter compared to the company's consumer model 077. It creates a vivid mid-high range and tightened the low frequencies (Fujisawa Yukishi)
Maintenance information: 2023.12.6 operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16Ω, playback frequency band, 6,500 to 21,500 Hz (manufacturer specified), crossover, 7 kHz, efficiency, 105 dB, W100 x D84 mm, 2.3 kg/book (not including frame), frame dimensions 110 x 100 mm
※This item is sold as it is. TAKET's supertweeters have a playback capacity of 150 kHz or more. The crossover slide switch was removed from the first BATPRO, fixed to the A position, and the terminals were changed. The efficiency can be switched between 5 levels with a rotary switch, creating natural overtones. The appearance is good in terms of dullness (Kobayashi Hitoshi)
Maintenance information: 2023.12.3 operation confirmation (sweep check ok)
Accessories: instruction manual, original box
Main specifications: maximum rated 35V, impedance, 8Ω, playback frequency band, 18kHz to 150kHz, W125 x H90 x D100 mm, approx. 260 g
※The sound output has been confirmed, but there is a break in 1 terminal, so it's cheap. It has been confirmed, but it is a luxury dome tweeter using beryllium from Denmark's prestigious Scanspeak that provides excellent units for Sonas Faber, Dinaudio, Dali, etc. (Murakoshi Yoichi)
Maintenance information: 2023.11.30 sound output confirmed
Accessories: original box
Main specifications: 4Ω 91.5dB 90W (RMS) 500Hz