Easily switch between 4 speaker systems with one touch. No power required. You can individually play 4 speakers with 1 premain amplifier. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: input/output terminals, one-touch speaker cable terminals x 10 (input 1/output 4, or input 4/output 1), can be connected, amplifier, maximum output, 250 w/ch, external dimensions: H53 x W240 x D182 mm, mass: 730 g
Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, square peeling, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
If you are looking for an AV switch selector, 4 ports, 4 inputs, 1 output, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 continuity confirmed
Accessories: instruction manual, original box
Main specifications: W136 x H43 x D88 mm 231 g (actual measurement)
The screw terminal block comes with a 4-pole cover, which is useful for extending and distributing speaker cables. The exterior is dull and there is a feeling of use such as writing (Tomoho Asaine)
Maintenance information: 2024.5.7 continuity confirmed
Main specifications: size W70 x H21 x D34 mm
※ Because it is cheap, it is currently sold. Switchable tone controller. You can adjust the low and mid high range tones according to the frequency characteristics of the system (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual, power cable
Main specifications: variable frequency low range 30/60/120 Hz, medium and high frequency range 5K/10K/15 kHz
An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By attaching it, the sound of a horn that is too strong is moderately diffused and calmed down. There is dirt, dullness, etc. (Oikawa Tetsuji)
LUXMAN's discrete premium line selector. You can select sources for up to 4 models. High-rigidity aluminum material is used for the housing, and 6N (99.99997% copper) wire with little information loss is used as the wiring material. The exterior is in good condition with no conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.6 continuity confirmed
Accessories: instruction manual
Main specifications: 6N copper wire, gold-plated internal wiring, 4 systems can be switched, W370 x H71 x D136 mm, 2.4 kg
Convenient digital needle pressure gauge. It is an excellent product that can measure up to 5g with a high accuracy of 0.01 g. (FUJISAWA KOSHI)
Maintenance information: 2024.5.6 operation confirmed
Accessories: No accessories
Main specifications: 5g dead weight
Cartridge case that can hold 2 bottles per shell with cartridges attached (model number unknown). The back case includes an overhang gauge and flathead screwdriver. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: screwdriver, overhang gauge
Main specifications: W130 x H100 x D50 mm 20.3 g (actual measurement)
Unspecified set of 7 insulators It is manufactured with materials thought to be pottery, but details are unknown. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 78 mm in diameter, 22 mm in height, 283 g
※The power has been turned on, but since there are no connected devices, the details have not been checked. Dedicated linear power supplies for the company's D50s+A50, DX3 Pro, etc. Since it is an ultra-low noise design, the frame is also made of hard aluminum blocks and has a high texture. If you've been looking for one, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: power input 115V/230V (50/60Hz) W110×H52×D110mm 0.88kg
※It is inexpensive because there are stains and scratches. Set of 8 DIATONE wooden block ACOUSTIC CUBE DK-5000. The dense composite material has an attractive natural sound. It can be used in a variety of ways, from medium to large speakers. The exterior is stained, scratched, etc. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W90 x H90 x D90 mm, weight approx. 360 g/piece
Stereo magazine appendix. By plugging it into the USB terminal of a PC or USB-compatible DAC, etc., USB power supply/signal noise is cut and sound quality is improved (Satoshi Yonejima)
Maintenance information: 2024.5.5 operation confirmed
Accessories: No accessories
Main specifications: W20×H12×D59mm 13g
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Mini plug to standard jack plug adapter Useful for connecting headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: original box
Set of 4 Technica cable terminator. OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Set of 4 stainless steel spike holders It is also useful for improving sound quality by firmly grasping the spike-shaped legs. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: stainless steel, diameter 35 x height 5 mm, approx. 39.5 g
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
Set of 4 unspecified metal type short pins The center pin is detachable and can also be used as an output terminal. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
※It has a cigarette smell, so it's cheap. Set of 4 WOOD BLOCK INSULATOR MADE BY CORAL. It is built with a sense of stability and can be used with a wide range of speakers from medium to large. The exterior is dirty, scratched, etc. ※Felt is attached to the top plate (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W100×H190×D390mm 5.2 kg/bottle
PSE standard product. Recommended parts for those looking for a high quality slim connector. It is a neutral character with no quirks. There are abrasions ※ cord bushing is missing (Tomoho Asaine)
Accessories: none
Main specifications: maximum diameter standard 8.5 mm/maximum 13.0 mm (when cord bushing is removed)
The company's SONICA DAC remote control unit*Please check the manufacturer's website for operating environments, etc. (https://www.oppodigital.jp/discontinued-product/sonica-dac/)(及川 Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
※Cleaning solution is not included. VPI's classic vacuum record cleaner. Attach the record to the turntable, apply cleaner liquid, clean it with a brush, and then use a vacuum method to strongly suck fine dust and dirt that has entered the disc's groove. There is a dent in the corner
Maintenance information: 2024.5.3 operation confirmed (rotation, vacuum OK)
Accessories: instruction manual, power cable
Main specifications: W394 x H235 x D362 mm 12.7 kg
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
Set of 4 Caldas jumper plates It is machined copper. There is an abrasion on the lug part (Murakoshi Yoichi)
Accessories: none
Main specifications: length from lug center to lug center: 37mm; lug inner diameter: 6mm
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
A set of 4 small mini pottery blocks made by Noritake, famous for its high-grade tableware. Compared to TAOC, etc., the impression is that the sound is gentle. The exterior has stains like tape marks on one side, dullness, and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: 80 x 100 x 200 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/5/3 sales price 25,000 yen ※It is cheap because it has a cigarette smell and tar stains. It is heavier than normal because there is filler in the struts. This speaker stand is optimized for the LS50 series and the company's bookshelf speakers and is tuned to maximize performance. There are scratches and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: spikes
Main specifications: Speaker stand dimensions W226 ✕ H657 ✕ D308 mm, weight 9.3 kg (actual measurement)
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. The exterior has line scratches and tape marks on the bottom (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W450 x D500 x H40 mm approx. 7 kg
The 2 shelves are missing and the dowels are missing and cannot be set. A horizontal AV rack designed with heat dissipation and wiring work in mind. Large TVs can be installed. Up to 6 amplifiers, devices, etc. can be stored. You can see the exterior, overall dullness, large abrasions, etc. (Kobayashi Hitoshi)
Accessories: 2 shelves (no missing dowels in the set)
Main specifications: W1202 x H732 x D582 mm load capacity/overall/top plate/shelf board/bottom plate 300/150/50/150 kg mass 83 kg
Jumper wire 18mm (High), 14mm (Low) pair end Y lug specification Caldas tri-wire jumper cable. The model number is unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Continuity confirmed
Accessories: none
This is a 12 dB/oct passive type filter used when playing back SP records on an ELP laser turntable. Removes noise in the high and low frequencies of SP records. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 sound output confirmed
Accessories: instruction manual
Main specifications: cutoff frequency continuously variable low 300 Hz or less, high 2 kHz or more continuously variable W200 x H68 x D170 mm kg
Strong casters are used, making it convenient to move heavy equipment and large speakers. In addition to peeling veneer on the exterior and sides, a feeling of use can be seen such as dullness, scratches, and abrasions (Kobayashi Hitoshi)
Accessories: none
Main specifications: W626 x H126 x D570 mm 14 kg
Speaker stand for YAMAHA NS-05 and NS-1 Perfect for other companies' small speakers (Takasaki Atsushi)
Accessories: none
Main Specifications: Speaker Stand External Dimensions W250 ✕ H385 ✕ D330 mm Weight 4.0 kg
※It is cheap because it is out of stock and is a spike replacement. A speaker stand that fits the top plate perfectly with JBL's signature speakers 4312, 4425, and 4428 series. Control the sound by filling the pillars with cast iron powder. The sound is like a control monitor with a sharp focus. The exterior has strokes and bruises (Tamura Eiji)
Accessories: spikes (replacement)
Main specifications: top plate W360 x D293 mm bottom plate W440 x H334 x D370 mm (actual measurement) weight 29 kg/bottle
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
The price has been reduced. 2024/4/29 sales price 45,000 yen Luxman high quality speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Heavyweight marble board Perfect as a speaker base or as a base for mono power amplifiers. The surface is polished, and the sides and back are not as smooth as the front. On the exterior, you can see a small chip on the back corner (Oikawa Tetsuji)
Accessories: none
Main specifications: Size: W400 x D500 x H50 mm 24.8 kg
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2222-5M2B (Fujisawa Yukishi)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
The price has been reduced. 2024/4/29 sales price 9,000 yen. ※Unused item. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low frequencies clear, and accurate sound images can be obtained (Hiura Katsuji)
Accessories: original box
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. The exterior has scuffs, dullness, and a feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W51×H85×D51mm