Set of 4 stainless steel spike holders It is also useful for improving sound quality by firmly grasping the spike-shaped legs. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: stainless steel, diameter 35 x height 5 mm, approx. 39.5 g
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
Set of 4 Caldas jumper plates It is machined copper. There is an abrasion on the lug part (Murakoshi Yoichi)
Accessories: none
Main specifications: length from lug center to lug center: 37mm; lug inner diameter: 6mm
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
A set of 4 small mini pottery blocks made by Noritake, famous for its high-grade tableware. Compared to TAOC, etc., the impression is that the sound is gentle. The exterior has stains like tape marks on one side, dullness, and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: 80 x 100 x 200 mm
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. The exterior has line scratches and tape marks on the bottom (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W450 x D500 x H40 mm approx. 7 kg
The 2 shelves are missing and the dowels are missing and cannot be set. A horizontal AV rack designed with heat dissipation and wiring work in mind. Large TVs can be installed. Up to 6 amplifiers, devices, etc. can be stored. You can see the exterior, overall dullness, large abrasions, etc. (Kobayashi Hitoshi)
Accessories: 2 shelves (no missing dowels in the set)
Main specifications: W1202 x H732 x D582 mm load capacity/overall/top plate/shelf board/bottom plate 300/150/50/150 kg mass 83 kg
Jumper wire 18mm (High), 14mm (Low) pair end Y lug specification Caldas tri-wire jumper cable. The model number is unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Continuity confirmed
Accessories: none
Strong casters are used, making it convenient to move heavy equipment and large speakers. In addition to peeling veneer on the exterior and sides, a feeling of use can be seen such as dullness, scratches, and abrasions (Kobayashi Hitoshi)
Accessories: none
Main specifications: W626 x H126 x D570 mm 14 kg
Speaker stand for YAMAHA NS-05 and NS-1 Perfect for other companies' small speakers (Takasaki Atsushi)
Accessories: none
Main Specifications: Speaker Stand External Dimensions W250 ✕ H385 ✕ D330 mm Weight 4.0 kg
※It is cheap because it is out of stock and is a spike replacement. A speaker stand that fits the top plate perfectly with JBL's signature speakers 4312, 4425, and 4428 series. Control the sound by filling the pillars with cast iron powder. The sound is like a control monitor with a sharp focus. The exterior has strokes and bruises (Tamura Eiji)
Accessories: spikes (replacement)
Main specifications: top plate W360 x D293 mm bottom plate W440 x H334 x D370 mm (actual measurement) weight 29 kg/bottle
The price has been reduced. 2024/4/29 sales price 45,000 yen Luxman high quality speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Heavyweight marble board Perfect as a speaker base or as a base for mono power amplifiers. The surface is polished, and the sides and back are not as smooth as the front. On the exterior, you can see a small chip on the back corner (Oikawa Tetsuji)
Accessories: none
Main specifications: Size: W400 x D500 x H50 mm 24.8 kg
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2222-5M2B (Fujisawa Yukishi)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
The price has been reduced. 2024/4/29 sales price 9,000 yen. ※Unused item. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low frequencies clear, and accurate sound images can be obtained (Hiura Katsuji)
Accessories: original box
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. The exterior has scuffs, dullness, and a feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W51×H85×D51mm
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
PSE standard product. A 3P5 port power strip made by BELDEN. This is a long-selling model of audio taps. Equipped with a ground terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance Information: 2024.4.27
Accessories: original box
Main specifications: W51×H32×D278mm 0.6 kg
It is an audio selector (passive type) for Real Acoustics Studio. There are 4 input systems and 1 output system. It is an easy-to-use car with VOL. There are line marks on the exterior (Hiura Katsuji)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: instruction manual connection cable original box
Main specifications: W150 x H60 x D120 mm weight 464 g
KRIPTON line transformer. Use it by placing it between the CD player and the control amplifier. It changes smoothly into expressive power, so it is also suitable for long listening. There are some tape marks on the exterior. Serial 0607119 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main specifications: frequency characteristics 10 Hz to 100 kHz W135 x H90 x D126 mm, weight 1.2 kg
Built-in digital input board. Digital music signals from digital devices can be input. Equipped with coaxial and optical fiber input terminals. There is a feeling of use such as dullness. Serial G2Y425 (Takasaki Atsushi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
Main specifications: Sampling frequency 32 kHz to 96 kHz, 24 bit digital input optical, 1 coaxial system, automatic switching between coaxial/optical input, equipped with automatic recognition function for sampling frequency, bit rate, and de-emphasis compatible models C-2000, C-245, CX-260, E-213, E-307, E-308, E-408, E-530, E-550
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
A record stabilizer that can be used properly with an LP/EP board on the front and back. There is a hole so that the EP adapter fits, so you can use it while attached (Mizushima Itsuro)
Accessories: none
Main specifications: zinc alloy diameter 70×H35mm 710g
Krypton outlet plate By tightening the 3-layer neo-fade carbon matrix material with a stainless steel frame, it is designed to have ideal damping characteristics without resonance/vibration. You can bring out the merits of high-resolution sound sources, etc. (Mizushima Itsuro)
Accessories: original box, screws
Main specifications: W70.4 x H114.4 x D4.0 mm approx. 50 g
Since it is said that electrode resonance is attenuated and rectified by combining multiple different materials such as phosphor bronze, brass, aerospace-spec aluminum alloy, and natural smoky quartz as materials, it seems that the effect can be realized if you try it by attaching a clean power source to an outlet, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 37 mm, cover length 63 mm
The price has been reduced! 2024/4/27 sales price 29,800 yen Krypton speaker stand. It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W249 x H620 x D325 mm top plate W200 x D260 mm weight 7.2 kg/unit
A compact and easy-to-use Orthophone digital needle pressure gauge. The operability is also simple, and it is possible to easily adjust the needle pressure with high accuracy (Mizushima Itsuro)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: instruction manual, original box
Main specifications: Equipped with auto power off function, measurement range 0.1 to 200 g (0.1 g units) W59 x H17 x D120 mm 68 g
Audio-Technica Shell Keeper, commonly known as Tri-Capsule. 3 can be stored with the headshell attached (Asaine Tomoho)
Accessories: none
Main specifications: W152 x H88 x D50 mm 120 g
Center spindle oil for TECHNICS SP-10MK2. Lubricating 2-3 drops once every 2000 hours is sufficiently effective (Asaine Tomoho)
Accessories: original box
Comes with a stroboscope! Turntable seat made of butyl rubber and tungsten. Achieves clear, cloudy playback sound. It also has an excellent effect on preventing vinyl records from slipping. The exterior has slight stains, dullness, etc. and a feeling of use (Tomoho Asaine)
Accessories: none
Classic speaker selector. It is a convenient car that outputs from 1 input system to 4 systems, or conversely, outputs from 4 input systems to 1 system (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
The price has been reduced. 2024/4/26 sales price 20,000 yen A convenient speaker selector that can connect 3 sets of speakers to 1 amplifier. Also, it is possible to switch between 3 amplifiers for 1 set of speakers. A simultaneous bipolar switching system has been adopted, and low contact resistance has been achieved by silver plating on the switch contacts and gold plating on the terminals. There is dullness and strong discoloration in the terminal (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: W250 x H60 x D150 mm 1.2 kg
This overhang gauge is convenient for positioning cartridges. The A side can be used for the record needle side slip test, and the B side can calibrate the cartridge part (Murakoshi Yoichi)
Accessories: none
Main specifications: acrylic diameter 295mm, thickness 2mm 154g
2 pcs per pair A convenient plug adapter for tight spaces or when you want to convert. There is oxidation on the exterior (Yonejima Satoshi)
Accessories: No accessories
This is a large and medium speaker base using magnesium struts injected with ultra-fine sand. It also creates effective ensembles for other subwoofers. There are scratches and dullness on the exterior (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W100×D400×H300mm 8,2kg/1 bottle
Comes with an acrylic cover. A cartridge keeper that can hold 6 cartridge shells. The clearance is large and easy to handle. There are scratches and dirt on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W200 x H107 x D100 mm weight 450 g (actual measurement)
Set of 4 spike bases A spike bass for audio created with an emphasis on strength and non-resonance. High-strength 2000 series alloy (non-magnesium) is used. Sound strength, sense of positioning, etc. can be improved. There is oxidation on the exterior (Tamura Eiji)
Accessories: none
Set of 4 spike bases A spike bass for audio created with an emphasis on strength and non-resonance. High-strength 2000 series alloy (non-magnesium) is used. Sound strength, sense of positioning, etc. can be improved. There is oxidation on the exterior (Tamura Eiji)
Accessories: none
Quadra 180mm pole set of 4 The neck is curved rather than straight. There is oxidation on the exterior (Tamura Eiji)
Accessories: head part of the head
Y lug plug set of 4 have mirror-polished terminal contact parts made of leadless brass material with excellent conductivity, and rhodium plating treatment has been applied to the surface to further improve conductivity and durability (Tamura Eiji)
Accessories: original box, instruction manual
A sound field tuning panel with strong stainless steel ribs with a thickness of 3 mm attached to Cirlogic's wooden tuning panel to give it the ability to contain deep bass. The hollow structure of coniferous plywood and pine wood enhances the transparency of sound quality. There are various ways to use it depending on the installation method, and it is versatile, such as expanding the listening point and enjoying sound quality with a comfortable sound field even in the living room, or absorbing boomy sound quality and enjoying fresh sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: Dimensions W910 x H1300 x D61 mm 26.6 kg (actual measurement)
MARK LEVINSON JC-2 power supply box produced by Rizaye. Operation has been confirmed. The main unit connection cable is not included. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 Operation confirmed (sound output confirmed on JC-2)
Accessories: power cable
Main specifications: W140 x H83 x D204 mm 1.1 kg
A dedicated insulator developed for the company's CD player Njoe Tjoeb. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: 50 mm in diameter, 25 mm in height (actual measurement)
*Both the main body and ottoman are inexpensive because the leather is torn and leaves a feeling of use. Ottoman with optional swing table Scandinavian design stressless chair. It is the best recliner that reclines naturally by simply putting weight on the backrest, and lifts up the backrest at the same time as the body is raised ※Shipping is estimated separately. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, threads, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W75×H96-106×D75mm ottoman W55×H40×D41mm
A line transformer equipped with 2 WE repeat coil 111C transformers (transformers for telephone voice relay). Although the range is narrow, the thickness has increased and the analog-like sound quality is very pleasant to the ears. There is a small scar on the dust (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Main specifications: input/van lance x 1 system unbalance x 1 system output/van lance x 1 system unbalance x 1 system 150 x 160 x 155 mm 6.66 kg (actual measurement)
This is a rhodium-plated model of the long-selling FI-11 series L-type plug FI-12L series. Adopts a new plating method and a newly developed cable clamp to control stable grip and resonance. Improved sound quality and improved durability have been achieved (Kobayashi Hitoshi)
Accessories: none
Main specifications: L type power plug cable, suitable diameter 9.5 mm to 17.0 mm, dimensions: 42.2 x 55.0 x 66.4 mm