Fostex metallized polypropylene film capacitors, used set of 2. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unchecked
Accessories: none
Key Specifications: 1.0 μF capacity
Unspecified AC inlet. It appears to be unused. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 6A 250V
Set of 4 Unspecified speaker terminal. Compatible with banana plugs. It appears to be unused. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Set of 12 red and white. RCA terminal with unknown details. It appears to be unused. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Output transformer pair sold, output for push pull, 100W, primary: 3.5kΩ, secondary: 4-8-16Ω, W125 × H114 × D125 × H138 mm, approx. 6 kg/piece (actual measurement, not including protrusions) There are minor hits in places (Kojima Yosuke)
Accessories: none
Main specifications: W125 x H114 x D125 x H138 mm, approx. 6 kg/piece (actual measurement, not including protrusions)
Choke transformer 5H/250 mA (maximum 330 mA) DC resistance 67 Ω (measured 65.0 Ω) W84 x H105 x D76 mm 2.3 kg There are small hits in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-105V secondary: 20-220-420-440V/0.7A 6.3V/4A ×3 70V/60mA W127 × H115 ×D127 mm 8.1 kg (actual measurement, not including protrusions) There are minor scratches (Kojima Yosuke)
Accessories: none
Large transformer amplifier chassis Originally, the TANGO MS-380DR, FW-100-3.5R, and MC-5-250D were attached to the transformer; many attachments are also included; there are scratches on the top angle ※ fixing screws are not attached (Kojima Yosuke)
Accessories: Attachments
Main specifications: W500 x H85 x D275mm 5.5 kg (attachment included)
Exclusive arm base for Nottingham's Hyper Space HD long arm. Arriving alone is rare. If you are thinking about upgrading to a long arm, please take this opportunity (Sasaki Shota)
Accessories: none
7,000 Hz module for the rare LNC-2. It is a module that can be converted to 3 ways simply by attaching it to the LNC-2 center board. Be sure to use the 43 series 3-way version or the original system (Tamura Eiji)
Maintenance information: 2023.11.10 Operation confirmed (sound output checked with LNC-2)
Accessories: none
Output transformer spare for single sale 1st: 2-2.5-3.5-5kΩ 2:4-8Ω (1st time: 2-2.5 kΩ) 8-16 Ω (1st time: 3.5-5 kΩ) W92 x H81 x D81 mm 1.8 kg/piece Rust floats on the stay part, and there is rubbing and scratches on the main body (Kojima Yosuke)
Accessories: none
Power transformer sold 1 piece primary: 100-110V secondary: 8 (CT) -12-14-16V/2A W99 x H67 x D70 mm 1 kg with original box (Kojima Yosuke)
Accessories: original box
Output transformer pair sold, horizontal shape type, output for push pull, 5 W, primary: 5 kΩ, secondary: 4-6-8-12-16 Ω with SG tap, W69 x H59 x D73 mm, 1 kg/piece (actual measurement, not including protrusions), the lead line on the secondary side is short (approx. 70 mm) (Kojima Yosuke)
Accessories: none
Power supply transformer input 100V output A power source: 6.3V/1A B power supply: 260V/30mA (with CT), 15,17V/2A (bridge only) W85 x H57 x D70 mm approx. 1.5 kg (actual measurement, not including protrusions) There is dullness in places on the body, but it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: original box
Power transformer 1st order: 100V 2nd order: 350V-320V-290V-70V-320V-350V-350V/DC170mA 6.3V-2.5V/3A 6.3V-2.5V/3A 6.3 V-5V/3A 103 × 86 × 85 mm 3.8 kg There are paint peeling and scratches in places (Kojima Yosuke)
Accessories: none
Interstage driver transformer sales matching impedance 1st: 10 kΩ 2nd: 40 kΩ W67 x D70 x H90 mm approx. 1.4 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Repeat coil pair sales lot: 6V70/6V70 W44 x H91 x D43 mm 0.56 kg/piece (actual measurement, not including protrusions) There are paint peeling and bumps ※Only conduction checks with a tester were carried out (Yosuke Kojima)
Accessories: none
Output transparent pair for push-pull primary: 5 kΩ secondary: 4-6-8-10-16 ohms W73 x H93 x D69 mm approx. 1.5 kg/piece (actual measurement, not including protrusions) There is a hit on the corner on one side (Yosuke Kojima)
Accessories: none
Disposal prices have been reduced! (Member discount does not apply) 2023/8/26 sales price 2,000 yen how about a rubber type woofer edge pair DS-600Z, etc. The exterior is generally good (Asaina Satoshi method)
Accessories: water-based bond brush
Main specifications: Overall edge diameter 247 mm Edge roll outer diameter 226 mm Cone diameter 190 mm Edge inner diameter 179 mm
Power transformer primary: 100V secondary: 320-280-0-80-280-320V/200mA 6.3V/3A 1-2.3V/3A 4V/3A 2.5-4V/5A 2.5V/5A W90 × D98 × H145 mm 4.3 kg There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 320-280-0-80-280-320V/200mA 6.3V/3A 1-2.3V/3A 4V/3A 2.5-4V/5A 2.5V/5A W90 × D98 × H145 mm 4.3 kg There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Output transparent pair for single primary: 2.5 KΩ secondary: 4-8-16 ohms output 12 W/ch W65 x H90 x D80 mm 1.14 kg/piece There are marks where the corners of the terminal plate were cut, and there are scratches and rust on the main body (Kojima Yosuke)
Choke transformer 5H/120mA (maximum 160 mA) DC resistance 155 ohms (actual measurement 157.5 ohms) W54 x H80 x D69 mm 0.7 kg/piece Rubbed against the nameplate, and there are paint peeling and snags on the main body (Kojima Yosuke)
Accessories: none
Choke transformer 10H/110mA maximum DC resistance 195Ω (actual measurement 195.7Ω) W66 x H72 x D72 mm approx. 1.1 kg Rust floats in places and there is paint peeling (Kojima Yosuke)
Accessories: none
Output transformer only 1 push-pull output 10 W primary: 10 kΩ secondary: 4-8-16 ohms W61 x H79 x D63 mm approx. 0.9 kg (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ohm-CT Secondary: 10 kΩ Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approximately 0.1 kg There is rust in places (Yosuke Kojima)
Accessories: none
Choke transformer 5H/200mA DC resistance 70Ω (actual measurement 66.3Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
Line matching transparent pair sold primary: 600 ohms, output 10 dBm, frequency range 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, is Tamura's OEM specification (Yosuke Kojima)
Accessories: none
Power transformer primary: 100-110V Secondary: 40V/50mA 6.3V/3.5A × 2 6.3 V/1.2A × 2 10-115-135-115V/AC0.9 A W120 × H72 × D104 mm approx. 4.2 kg (actual measurement, not including protrusions) There are places where some terminals have come off (there is no problem with conduction) There are paint peeling and scratches in places (Yosuke Kojima)
Accessories: none
Choke transformer 15H/150mA DC resistance 155 ohms (actual measurement 157.8 ohms) W84 x H105 x D75 mm 2.3 kg with original box, some paint is peeled off, and there are scratches (Kojima Yosuke)
Accessories: original box
AC100V/0.6A 15V/1.5A 5V/2A 6.3V/1A 260V/35mA Center Tap Rectifier W95 x D95 x H64 mm 1.84 kg for Power Transformer Tube Preamp Some of the drawer lines with the original box are short, and there is some rust on the main body (Kojima Yosuke)
Accessories: original box
Choke transformer 5H/120mA (maximum 160 mA) DC resistance 155 ohms (actual measurement 158.7 ohms) W54 x H80 x D69 mm 0.7 kg/piece Rubbed against the nameplate, and the printing has disappeared (Kojima Yosuke)
Accessories: none
Input transparent pair sales primary: 600 ohms secondary: 60 kΩ boost ratio 1:10 W 25 x D43 mm approx. 70 g/piece There is overall dullness (Kojima Yosuke)
Accessories: none
Choke transformer 10H/200mA DC resistance 95Ω (actual measurement 95.5Ω) W83 x 109 x D75 mm 2.4 kg There are hits and scratches and paint peeling in places on the main body (Kojima Yosuke)
Accessories: none
Output transparent pair for push-pull, output 10W, primary: 8kΩ, secondary: 4-8-16 ohms, W62 x H89 x D63 mm, approx. 1 kg/piece, paint is peeled off, and there are scratches (Kojima Yosuke)
Accessories: none
Input transparent pair sales Permalloy core primary allowable DC current 60 mA (for 2 primary PPs), 1.5 mA (unbalance) transformation ratio 1+1:2+2 primary impedance 7 kΩ primary impedance 170 H (5 V/50 Hz) driver tube example 6SN7, 76, 6350, ECC81, etc. (primary single), 6V6, 6F6, etc. (primary push-pull) W50 x H80 x D86 mm approx. 0.8 kg/piece on the edge of the mounting surface There is rust on it, and there are scratches in places. Copy of instruction manual, TANGO badge included ※nameplate not attached (Kojima Yosuke)
Accessories: copy of instruction manual, TANGO badge (unused)
Power transformer primary: 100V secondary: 370-400V/AC0.6A, double voltage DC160mA 150-0-150V/60mA 10V/5A × 2 6.3 V/2A × 2 W125 × H140 × D125 mm approx. 8.9 kg (actual measurement, not including protrusions) Rust floats on the mounting surface side, and there is discoloration on the entire coating film (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-110V secondary: 6.3V-1A × 2 12.6-6.3/1A 270V/50mA W83 × H57 × D70 mm 1.4 kg There is rust mainly on the sides (Yosuke Kojima)
Accessories: none
※It is inexpensive because the lead wire on the coil side is broken in 1 place (the lead wire on the coil side is conductive) Power transformer primary: 90-100-110V secondary: 6.3 V/1A x 2 6.3 V/3A (with CT) 6.3 V/3A 5V/4A 385-340-0-50-340-385 V/20 mA Usage: 6CA7, 6GB8 push-pull, etc. W121 x H133 x D101 mm 6.1 kg (actual measurement, including protrusions) There are thin rust scuffs in places in places (Kojima Yosuke)
Accessories: none
※Only 1 output transformer push-pull output 10W primary: 8 kΩ secondary:: 4-8-16 ohms
W75 x H98 x D78 mm 1.54 kg (actual measurement, not including protrusions) There are abrasions and paint peeling (Kojima Yosuke)
Accessories: none
Line matching transparent pair sales primary side: 600 ohm CT (150 split) secondary side: 20 kωCT (5k split) W77 x H71 x D43 mm 0.54 kg/piece (actual measurement, not including protrusions) One side with the original box seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: original box