Weight main weight for SME/3009S2IMP It can handle cartridge+headshell weights of 20.5 to 28.5 g, and the range of cartridges that can be used also expands. The exterior has dullness and small scratches (Kobayashi Hitoshi)
Accessories: none
Main specifications: Diameter approx. 32mm, dead weight approx. 163 g
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Choke Transformer 30H/100mA DC Resistance 251Ω (Actual Measurement) W81 x H102 x D69 mm 1.66 kg (Actual Measurement, Protrusions Not Included) (Kojima Yosuke)
Accessories: none
Choke Transformer 30H/100mA DC Resistance 249Ω (Actual Measurement) W81 x H102 x D69 mm 1.66 kg (Actual Measurement, Protrusions Not Included) (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 5V/3A, 2.5-6.3V/5.2A × 2, 6.3V/3A, 360-400-450V/170mA W120 × H95 × D105mm 5.3 kg ( There are some scratches and abrasions (not including protrusions) (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 5-6.3V 250-0-250V The current value is not specified. It looks like a custom-made item from the model number W85 × H110 × D75 mm approx. 2.9 kg (actual measurement, protrusions not included) (Kojima Yosuke)
Accessories: none
Choke transformer 5H/350mA DC resistance 60 ohms (actual measurement) W90 × H105 × D81 mm 3 kg (actual measurement, not including protrusions) There are abrasions and paint peeling (Kojima Yosuke)
Accessories: none
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Output transparency sold for push-pull primary: 3.5 kΩ Secondary: 4-6-8-10-16 Ω W117 × H110 × D117 mm 4.6 kg/piece (actual measurement, not including protrusions) left and right side of the locking screw The number is different, some screw holes are distorted, and there are abrasions and paint peeling, so they are inexpensive (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 400-370-0-370-400V/0.35A, 5V/6A, 5V/5A × 2, 6.3-10V/3A W120 × H104 × D105 mm 6.5 kg There are hooks, abrasions, and paint peeling in places (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
The price has been reduced. 2021/9/7 sales price 7,000 yen. TANGO power transformers are sold as 1 piece, and the exterior leaves a feeling of use such as solder marks. Primary 100-110V Secondary 17.5-27-35V/3.6A × 2 50-0-50V/0.36A (Kondo Hirotsugu)
Maintenance Information: 2021.9.7 Continuity Confirmed
Accessories: none
Main specifications: W120 × H95 × D105 mm 5.7 kg
The price has been reduced. 2022 10/16 Sales price 188,000 yen Output transparent sale single use R core transformer oil filled type (makes a shabby sound when shaking) Primary: 3KΩ Secondary: 4-8-16Ω Uses: 300B, 2A3, etc. Details such as other output values are unknown W100 × H150 × D100 mm approx. 3.6 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
The power transformer terminal seems to be made by Tektron due to its shape and appearance. Primary: 100V, Secondary: 5V/3A, 5-10V/2A, 6.3-10V/2A, 360-340-0-340-360V/150mA It seems that it was used to drive a 300B single amplifier. There are scratches in some places (Yosuke Kojima)
Accessories: none
Main specifications: W100 × H150 × D100 mm approx. 4.6 kg/piece (actual measurement, not including protrusions)
The power transformer terminal seems to be made by Tektron due to its shape and appearance. Primary: 100V, Secondary: 5V/3A, 5-10V/2A, 6.3-10V/2A, 360-340-0-340-360V/150mA It seems that it was used to drive a 300B single amplifier. There are scratches in some places (Yosuke Kojima)
Accessories: none
Main specifications: W100 × H150 × D100 mm approx. 4.6 kg/piece (actual measurement, not including protrusions)
1 power transformer sold primary: 100V secondary: 4-6.3V/3.6A × 2, 5V/3.8A, 5-7.5V/3A, 4-5V/3A, 400-360-120-0-360-400V/ 250mA W90 x D100 x H158 mm approx. 4.6 kg/piece There are a lot of scratches on the whole (Yosuke Kojima)
Accessories: none
The price has been reduced. The 2020/3/11 selling price is 1,400 yen. Power transformer sold as 1 AC LINE/100V, 26V/1.2A, rust, scratches, torn paper labels, etc. (Murakoshi Yoichi)
Maintenance Information: 2020.3.11 Continuity Confirmed
Accessories: none
Main specifications: W50 × H85 × D85 mm
The price has been reduced! It is an air core coil for speaker networks with a selling price of 8,000 yen on 2022 9/22. The copper wire uses OFC and a copper foil Hi-μ (Hi-Mew) core, and is a special product aiming for low loss and high sound quality (Mizusaki Ryo)
Accessories: original box
Key Specifications: Capacity 0.47mH
It is a transformer that can use Japanese products up to 60W in 220V regions such as Switzerland, Germany, China, etc., and products from 220V regions up to 60W in Japan (Tomoho Asaine)
Accessories: none
Main specifications: 60W, body size, W71 x H85 x D116 mm, mass: 1.8 kg
Choke transformer nickel alloy core actual measurement DC resistance 111.1Ω Other specifications are unknown W90 × H95 × D70 mm approx. 2.2 kg (actual measurement, not including protrusions) with mounting screws (Kojima Yosuke)
Accessories: with mounting screws
There were no conduction problems, but they are inexpensive because there are small dents and wrinkles. Adopts a diamond edge with clear high frequencies! diaphragm for JBL2440/2441 If you are a user, how about taking this opportunity (Sasaki Shota)
Maintenance information: 2022.9.26 conductivity confirmed (measured resistance value 8.1 ohm/8.1 ohm)
Accessories: original box
Key Specifications: 2 inch diaphragm for JBL 2440/2441
Power transformer primary: 85-100-115V secondary: 370-0-370V/250mA, 5V/3A, 6.3V-CT/1A, 6.3V-CT/4A W120 × H162 × D143mm approx. 8kg (actual measurement, not including protrusions) There are scratches, abrasions, and paint peeling in places (Kojima Yosuke)
Accessories: none
The power transformer badge is not attached, but it is probably made by YAMAGISHI due to the shape etc. Primary: 85-100-115V Secondary: 370-0-370V/200mA, 5V/2A, 6.3V-CT/1A, 6.3V-CT/4A W105 × H132 × D123 mm 5.6 kg (actual measurement, not including protrusions) There are scratches and paint peeling in some places (Kojima Yosuke)
Accessories: none
This is a matching transformer for speakers. By combining it with a low impedance speaker, it can be used in systems with low voltage transmission. The degree is generally good (Murakoshi Yoichi)
Maintenance Information: 2022.9.24 Continuity Confirmed
Accessories: instruction manual, original box
Key Specifications: At 6 ohms: 880/1280/2440/5050 ohms
Driver transformer pair sold response frequency: 200 to 15,000 Hz only conduction confirmed, other specifications unknown W58 × H74 × D55 mm approx. 0.5 kg/piece (actual measurement, not including protrusions) abrasion There is paint peeling, but the terminals are in good condition (Kojima Yosuke)
Accessories: none
Speaker Terminal Set of 4 This is a standard SP terminal that can be used not only with banana plugs, but also with Y lag terminals (Mizusaki Ryo)
Accessories: terminal base, tools
Main specifications: outer diameter 17.0 mm length 46.0 mm overhang (inside) 9.5-14.0 mm overhang (outside) 30.0 mm boring diameter 2 x 11.0 mm compatible cable diameter 5.5 mmPhi
A rare item is in stock. Bass reflex port for EC series enclosures by Sansui. Set of 4 in total: 2 90mm hole diameters and 2 120mm hole diameters. If you are looking for one, please come (Fujisawa Yukishi)
Accessories: none
Main specifications: W149 × H49 × D120 mm W149 × H49 × D90 mm screw pitch actual measurement 162 mm hole diameter 90 mm/120 mm
Matching transparent pair sold primary (secondary): 500-333-250-200-125-50Ω maximum +20dB W79 x H83 x D77 mm approx. 0.9 kg (actual measurement, not including protrusions) with specifications The paint is peeled off on one side, and there is a bend near the mounting hole (Kojima Yosuke)
Accessories: none
Output transparency sold primary (secondary): 50/125/200/333/500Ω Response frequency: 0 to 50000 Hz W38 × H49 × D38 mm approx. 0.26 kg (actual measurement, protrusions not included) One side mounting screw is not attached. There is a lot of paint peeling, but the terminal part is good (Kojima Yosuke)
Accessories: none
The price has been reduced. 2022 6/10 sales price 3,000 yen The network used for the Sansui SP-70 attached to a wooden board. The high frequencies are cleared by switching the switch. It switches between 3 levels: natural and soft. Sound has been confirmed (Murakoshi Yoichi)
Maintenance information: 2022.6.10 sound confirmed
Accessories: none
Main specifications: attenuation 12dB/oct crossover frequency 6000 Hz 8Ω 97dB W170 × H133 × D71 mm
This is a genuine standard weight for the FR-64S, which is rarely available as a single item. It is essential for those who have lost it and those who only have option weights (Murakoshi Yoichi)
Accessories: none
Main specifications: 227g
Output transparency sold for push-pull output 60W primary: 3.5kΩ (8Ω only), 5kΩ secondary: 4-8-16Ω Actual measurement drawer line length: primary side 70-100mm, secondary side 100-140mm W86 x 103 x 93 mm approx. 2.8 kg (actual measurement) There is some paint peeling, and there are scratches in some places (Yosuke Kojima)
Accessories: Specifications/wiring diagram (with writing)
Output transparency, sold for push-pull, output 15W, primary: 4.5 kΩ, secondary: 4-8-16 Ω, W96 x H79 x 85 mm, approx. 1.9 kg (actual measurement, not including protrusions), scratches, paint marks I have baldness (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 500-450-400-350-300-0-300-350-400-450-500V/DC120mA, 6.3-5V/3A, 6.3V/2A, 7.5-6.3-5-4-2.5V/3A x 2 system W120 x H92 x D105 mm 4.8 kg seems to be an unused item from the original boxed state! (Kojima Yosuke)
Accessories: original box
Power transformer primary: 100-110V secondary: 10-0-85-105V/0.7A, 6.3V/2A × 4, 32V/30mA W105 × H80 × D92 mm approx. 3.6 kg (actual measurement, protrusions not included ) There are abrasions and paint peeling in some places (Yosuke Kojima)
Accessories: none
Power transformer input 100V output A power supply: 6.3V/1A B power supply: 260V/30mA (with CT), 15,17V/2A (bridge only) W85 × H57 × D70 mm approx. 1.5 kg (actual measurement, protrusion There are abrasions and bruises (not including parts) (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 5V/0.6A, 6.3V/3A × 2, 300-280-0-280-300V/AC140mA, 5-6.3V/3A W100 × H111 × D83mm 2.5 kg (actual measurement, including protrusions) There are minor scratches and thin abrasions (Kojima Yosuke)
Accessories: none
The price has been reduced. 2020/9/5 sales price 5,000 yen heater transformer sold as 1 piece 100V 6.3V-2.0A heater for pilots and small output amplifiers W93 × H45 × D60 mm 740 g (Kondo Hirotsugu)
Maintenance Information: 2020.9.5 Continuity Confirmed
Accessories: original box
The price has been reduced. 2018/10/24 sales price is 3,000 yen. This is a power transformer with no PSE and unknown details. There is rust, dirt, etc. (Murakoshi Yoichi)
Maintenance information: 2018.10.24 continuity confirmed
Accessories: none
Output transformer output 50W for push-pull primary: 5 kΩ secondary: 4/8/16 Ω W90 × H145 × D101 mm 5.1 kg/piece (actual measurement, not including protrusions) No badge, abrasions in some places, paint chips There is (Kojima Yosuke)
Accessories: none
1 power transformer sold primary: 100V secondary: 320-280-0-80-280-320V/200mA 6.3V/3A 1-2.3V/3A 4V/3A 2.5-4V/5A 2.5V/ 5A W90 × D98 × H145 mm 4.3 kg There are bruises in some places (Yosuke Kojima)
Accessories: none
Manufacturer unknown, 8mm thick arm base for SME. It is useful when you want a little height, such as when setting it on a garrard. There is a little rust on the inside of the frame (Yoichi Murakoshi)
Accessories: none
Main specifications: W82 × H8 × 49 mm Weight 115 g
Output Transparency Pair Sale Push-Pull Output 60W Primary: 6.6kΩ Secondary: 4-8-16Ω W122 × H163 × D133 mm Approx. 8.4 kg/piece (actual measurement, not including protrusions) Some large bruising Yes, there are bruises and abrasions in other places (Yosuke Kojima)
Accessories: none
Choke Transformer Hammer Tone Finish 15H/150mA DC Resistance 155Ω (Actual Measurement 154.5Ω) W84 × H105 × D75mm 2.3 kg It seems to be an unused item from the state with the original box! (Yosuke Kojima)
Accessories: original box
Choke Transformer Hammer Tone Finish 10H/200mA DC Resistance 95Ω (Actual Measurement 96.4Ω) W83 × 109 × D75mm 2.4kg It seems to be an unused item from the state with the original box! (Yosuke Kojima)
Accessories: original box
Choke Transformer Hammer Tone Finish 1.5H/500mA DC Resistance 20Ω (Actual Measurement 20.3Ω) W83 × D75 × H105 mm 2.4 kg (Not Including Protrusions) Thought to be an unused item from the state with the original box It will be! (Yosuke Kojima)
Accessories: original box
Choke Transformer Hammer Tone Finish 1.5H/500mA DC Resistance 20Ω (Actual Measurement 20.2 Ω) W83 × D75 × H105 mm 2.4 kg (Not Including Protrusions) Thought to be an unused item from the state with the original box It will be! (Yosuke Kojima)
Accessories: original box