*Since there is no manufacturer, it will be sold as is. Clean regulator with low noise power supply function for CSE notebook PCs and peripheral units. It supplies high quality power in place of the AC power adapter included with the laptop. These solve noise problems etc. caused by the included AC adapter, and you can enjoy high-quality sound playback with PC audio. You can see a feeling of use, such as appearance, dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: power cord, connection cord, plug adapter
Main specifications: PSE standard product W221 x H145 x D413 mm weight 11 kg
Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
A pioneer hard dome tweeter that uses a beryllium diaphragm as the diaphragm. It achieves flat characteristics and excellent transient characteristics up to 55 kHz, which greatly exceeds the audible band. The exterior has small scratches and dullness. (FUJISAWA KOSHI)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: No accessories
Main specifications: impedance 8 ohms frequency band 2.5 kHz to 55 kHz maximum input 40 W rated input 20 W output sound pressure level 91 dB body diameter 70 x 82 mm weight 1 kg (cover included)
Maintained. This model has been reproduced by utilizing Sansui's technology down to the smallest detail. It's a bold sound, but it also has a very clear outline and is also delicate. There are plenty of pleasant sounds of jazz, rock, soul, etc. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.14 Maintained (switch dismantling and polishing grease, etc. applied (tone, loudness, muting, subsonic, turnover, power amplifier direct, source direct, reck-out, tape switch), balance volume replacement, output relay, headphone relay replacement, power amplifier section transistor adjustment volume replacement, protector capacitor replacement , solder repair, volume, switch cleaning, interior and exterior inspection and cleaning, bias, DC adjustment, operation confirmation. (Balance volume is a reusable product)
Accessories: copy of instruction manual
Main specifications: effective output 6Ω160W+160W, 8Ω130W+130W power amplifier direct circuit (with both balanced and unbalanced inputs) PHONO (MM/MC) dimensions W460 x H159 x D446 mm weight 22.5 kg
Audio-Technica universal tone arm for broadcast stations. The lead wire inside the arm uses silver wire with a Teflon coating. This is such a masterpiece arm that was later reprinted for a limited time. The exterior is slightly dull, but it is good for the model year (Murakoshi Yoichi)
Maintenance information: 2024.5.13 operation confirmed 2024.2.27 operation confirmed, IFC weight thread replacement
Accessories: copy of instruction manual, connection cord, armrest, hex wrench
Main specifications: static balance type, execution length 257 mm, compatible cartridge, 13.5 to 33 g (including shell), needle pressure range 0 to 3 g
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Vibration-absorbing insulators, set of 8, type S with emphasis on vibration absorption, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Asaine Tomoho)
Accessories: none
Main specifications: W20mm×H5mm×D20mm
Nagaoka's self-adhesive record cleaner. This self-adhesive record cleaner uses special rubber to remove dust and dirt from the bottom of the sound groove. Dirt on the roller is removed by washing it with water, and it can be used over and over again. The exterior is relatively good (Yonejima Satoshi)
Accessories: storage case
Main specifications: case size W106 x H44 x 100 mm 133 g (including case)
*Currently sold. It is a CD player equipped with Victor's own DD converter and K2 interface. It is an ambitious work incorporating the manufacturer's unique technology even within the popular price range. The rich sound field expression and the supple texture of the sound are attractive. The exterior has small scratches and dullness. Serial 17405073 (Yonejima Satoshi)
Maintenance information: 2024.5.13 operation confirmed
Accessories: remote control, instruction manual
Main specifications: W435 × H130 × D341 mm 7.5 kg
I checked Blu-ray, DVD, and CD playback with a simple check. Since it is cheap, it will be sold as is. A high-end Blu-ray disc player from 2008. Equipped with a high image quality circuit CREAS with 14 bit processing. You can enjoy SONY-like sound quality that is clear and has good cuts (Murakoshi Yoichi)
Maintenance information: 2024.5.10 simple sound output, video output confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: compatible media · BD/DVD-R/-RW/+RW/+R card slot no LAN terminal · no DV terminal · D terminal x 1 · optical D audio x 1 · HDMI terminal x 1, no 3D video compatible W430 x H125 x D365 mm 10 kg
HDMI cable 1.0m 4K/8K, UltraHD, eARC, 48Gbps compatible HDMI cable It is backwards compatible and can also be used with devices older than HDMI 2.0 (Murakoshi Yoichi)
Accessories: none
Currently sold. The BEHRINGER DEQ2496 is a digital processor ideal for people who want to make quick and easy settings, since most of the equipment required for a PA system is completed with this one unit. It is a convenient item equipped not only with an equalizer and compressor/limiter, but also with functions that automatically remove frequency correction and feedback (Murakoshi Yoichi)
Maintenance information: 2024.5.9 sound output confirmed (details unchecked)
Accessories: instruction manual, power cord, original box
Main specifications: W480 x H42 x D210 mm 2 kg
Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. Small scratches are scattered on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK)
Accessories: instruction manual (copy)
Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
FOSTEX aluminum horn tweeter A horn tweeter with an Alnico magnet, horn type, and attractive specs with high efficiency. It is sharp and has excellent penetrating power. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: none
Main specifications: Hard aluminum alloy diaphragm, Alnico magnet, frequency characteristics, 5kHz to 35kHz, impedance 8Ω, output sound pressure level, 106 dB, recommended crossover, 7 kHz, baffle opening dimensions: 61 mm, weight: 720g
Comes with original box and is in excellent condition! Limited production of 2000 pieces, DL-103 special model. High-grade specifications that use pure gold for the coil and use a special resin containing carbon for the body. Compared to the normal 103, the thick, thick sound from bass to medium is attractive. Not only for collection purposes, this cartridge is worth listening to (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box
Main specifications: Generator coil, pure gold wire body, carbon fiber reinforced case, MC type, output voltage 0.25mV, proper needle pressure, 2.2 g to 2.8 g, dead weight 9.3 g
A horn type tweeter that is an improved model of the JA-0506. Alnico magnets are used for the magnetic circuit, and hollow-out aluminum is used for the horn part. A hard duralumin V-shaped ring diaphragm is used for the diaphragm. The sound is bright and clear (Daiki Goto)
Maintenance information: 2024.5.13 (operation confirmed)
Accessories: original box
Main specifications: horn type tweeter unit Alnico magnet 0.23 kg impedance 8 ohms playback frequency band 3 kHz to 20 kHz recommended usage band 5 kHz or more rated input 1 W maximum input 2 W sound pressure level 109 dB
Maintained by the manufacturer! A system in which Denon's DP-5000F phono motor and SAEC tonearm WE-308, which is highly regarded for its high accuracy, are mounted on the cabinet Lead-console Type2. The DP-5000F is a high-performance phono motor that inherits the elegant and unique design of the previous model DP-5000 and has the same performance as a commercial device, and also adds ease of use and reliability. The WE-308 uses hard rubies for double knife-edge bearings, and is characterized by crisp, clear sound and accurate sound image localization. Furthermore, heavyweight cartridges can also be used with self-made subweights by the previous owner (Oikawa Tetsuji)
Maintenance information: 2024.5.12 Denon maintained (30 defective transistors replaced, speed adjusted)
Accessories: Heavyweight
Main specifications: DP-5000F: servo type direct drive WE-308: double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g W510 x H210 x D456 mm (actual measurement)
Maintained by the manufacturer! Denon's highest-model phono motor at the time. They are orthodox and have a high sense of stability, such as a turntable with a double structure and DENON's traditional AC servo motors. There are dents in places (Oikawa Tetsuji)
Maintenance information: 2024.5.12 manufacturer maintained (head gap adjustment, speed adjustment. (Inspection of each part, operation test)
Accessories: copy of instruction manual
Main specifications: quartz lock direct drive, outer rotor, 3-phase AC servo motor, double structure, die-cast aluminum turntable, compatible with 33 and 45 rotations, approx. 10 kg
The first stereo power amplifier with audio design to arrive. I immediately played it at the storefront, and it expressed a very clear and realistic sound image. In particular, mid-high range vocals and pianos are vivid and powerful amplifiers. There is a small line scratch on the top plate on the exterior (Sasaki Shota)
Maintenance information: 2024.5.12 operation confirmed
Accessories: manual, power cable
Main specifications: 100W+100W (RCA, 8Ω) 270W+270W (XLR, 8Ω) W260 × H290 × D360 mm 18 kg
The price has been drastically reduced. 2024/5/12 sales price 238,000 yen Accuphase power conditioner. PS-500 upgraded model. The sense of transparency increases, and the way stillness and motion are drawn is more delicate. It is recommended for those who are thinking about upgrading the power supply area. There are dents and stroke marks on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, power cable
Main specifications: rated output capacity 510V (continuous) rated output voltage AC100V±2V rated output current 5.1A output frequency 50/60 Hz (synchronized with input frequency) instantaneous current supply capacity 70A input voltage range AC90 to 110V power consumption at no load 55 W 475 W x 180 H x 394 Dmm 23.8 kg
The price has been reduced. 2024/5/12 sales price 398,000 yen A popular model equipped with a diamond tweeter that rewrote the history of the 800 series. The color is rose. The excellent stretch that penetrates the high range without habit and the sense of volume in the mid to low range, which has a strong presence, are appealing not found in the current D3. The bass reflex port is sticky and there is rubbing on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, original box, jumper cable, cloth
Main specifications: 2 way 2 speakers bass reflex diamond dome tweeter 8 ohm crossover 4 kHz frequency characteristics 42 to 33 kHz W238 x H418 x D351 mm 12 kg
Pickups have already been exchanged with Denon Service! Denon's SACD player. It is a standard model equipped with the Advance AL32 Processor, the latest version of Denon's Alpha processing technology, and has generously introduced the latest technology. You can fully enjoy the depth of sound, and SN has been further improved compared to the previous model. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.12 manufacturer maintenance (CD traverse mechanism, loading belt replacement.)
Accessories: copy of manual, power cable, remote control
Main specifications: SACD compatible analog audio output/optical digital output x 1, coaxial digital output x 1 optical digital input x 1 USB (TypeB) x 1 USB (TypeA) x 1 D/A converter compatible sampling frequency 32 to 192 kHz size W434 x H138 x D335 mm weight 13.7 kg
Basic model of the M.C.D 300mk2 VDH-T series with 0.8 m pair of RCA cables, OFC conductors. Although it is a slender cable, the smoothness and softness of the sound is characteristic of lightness while being compared to higher-level models. There are dullness and abrasions around the plug (Kojima Yosuke)
Accessories: none
RCA cable 1.5 m pair high purity silver coated OFC M.C.D 310 line cable with an impressive thick sheath. The soft, smooth tone is attractive. The appeal is that it clearly and casually asserts individuality. There are scratches and discoloration on the plug (Kojima Yosuke)
Accessories: none
Phono cable 1.2 m 5 pin DIN-RCA terminal core wire 0.08 x 40 TW series phono cable sold in the 90s. It is positioned as a basic model among the company's cables and has a light sound with good sound loss. There are abrasions around the plug (Kojima Yosuke)
Accessories: none
Phono cable, 1.3 m, 5P-RCA specification, PCOCC conductor, the standard model of an easy phono cable, since it is a PCOCC conductor, the resolution is excellent. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
RCA cable, 1.2 m pair, silver coated copper wire, turn shield structure, Teflon insulator, is a high density and highly expressive cable with high sound quality (Kojima Yosuke)
Accessories: none
Speaker cable uses the company's own fully monocrystallized copper PSC+ and OFHC LGC with the lowest distortion rate for the 3.0 m pair of speakers cable. The expressive power of the sound field space is high, and you can feel the natural spread of sound. Since the cable is stiff, it is difficult to handle (Kojima Yosuke)
Accessories: none
Equipped with a 1.0m pair DBS36V RCA cable The internal structure is common to JAGUAR, but Teflon is used as the insulator for the internal core wire. Stable signal transmission is achieved by DBS (Dielectric Bias System). There are places where the coating near the base of the plug is frayed and becomes a ball (Kojima Yosuke)
Accessories: original box
Speaker cable 2.5 m pair EQS6 single specification Y lug to Y lug terminal OCC high purity copper is a mid-size model of the company's speaker cable. Dramming is suppressed compared to higher-level models, and the sound quality is cleaner. It can be combined without worrying about compatibility with speakers. A damping seal is attached to the cable branch on one side (Kojima Yosuke)
Accessories: original box, manual
The digital cable is equipped with a 1.0m RCA collect chuck plug-in impedance matching network. Equipped with 4 RF filters, noise is reduced by turning on switches 1 to 4 depending on the environment. There are scratches and paint peeling around the box and around the plug (Kojima Yosuke)
Accessories: none
Maintained! Standard ES Primain model released in 1986. It is also equipped with a cartridge load selector, making it a perfect car for those who want to use it in a wide range of ways. The sound has momentum and sharpness is attractive. The exterior has a line scratch on the back of the top plate (Sasaki Shota)
Maintenance information: 2024.5.12 maintained (speaker relay replaced due to poor contact, other volume volume replaced with sound, mute push SW poor contact replacement, other INPUT selector, Cartrich LOAD selector, speaker selector parts disassembly contact polishing and cleaning grease applied, and each input/output connection sound output will be checked. DC bias, DC balance adjustment)
Accessories: copy of the manual
Main specifications: 105W+105W (8Ω) phono input mm/MC compatible dimensions W470 x H161 x D436 mm weight 18.6 kg
This is a brass tweeter stand for the company's T900A, T925A, and T90A. The tweeter can be stably placed on top of the speaker system. The exterior has scratches, dullness, etc. (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W65 x H20 x D91 mm weight 471 g (actual measurement)
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Tamura Eiji)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: case
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
This is the green type of the company's Prestige series. It has high tracing ability and plays a sound with good localization (Tamura Eiji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: case, instruction manual, needle cover
Main specifications: frequency characteristics 10 to 50,000 Hz, suitable load, 47 kΩ, output, 5 mV, suitable needle pressure, 1.5 g, oval needle, dead weight 5.5 g
Maintained in 2023/4. The highest-grade cassette deck equipped with dbx. The power supply unit and amplifier section have been thoroughly strengthened, and the sound quality as a cassette deck has been further enhanced. The clean sound without exaggerating too much is attractive. As for the exterior, there are scratches and dents on the top plate. Serial 20315-11138 (Yonejima Satoshi)
Maintenance information: 2023.4.10 Maintained (replacement of consumables such as belts. Grease up moving parts, starting around the head. Tape path, head azimuth adjustment, tape speed inspection. Pinch roller and head cleaning)
Accessories: No accessories
Main specifications: 3 head frequency characteristics 20Hz to 21kHz W475 x H112 x D353 mm 7.3 kg
Maintained by the manufacturer! Accuphase mid-size model equipped with phono (MM/MC). Stable sound quality with high S/N, high resolution and high transparency. Also, just like this age, the bass has elasticity and energy, so you can enjoy it regardless of the music genre. There is a feeling of use on the exterior, such as dullness and small scratches. Serial K5X480 (Hiroki Aso)
Maintenance information: 2024.5.12 Accuphase maintenance completed (main volume contact cleaning, left channel, separate switch contact cleaning, foot, felt, capacitor replacement, Comp Subsonic switch replacement, insulation sheet replacement, meter logo, lamp replacement, internal and external cleaning, checking performance of each function, checking pressure-resistant safety)
Accessories: remote control instruction manual power cable
Main specifications: output 100W+100W (8Ω) power consumption 290W 8Ω load rated output 390W phono input 1 system (MM/MC switching) line input 7 systems (balanced x 2 systems, unbalanced x 5 systems) tape system 1 system dimensions W475 x H170 x D418 mm weight 20.2 kg
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
The uncompromising construction is excellent, with an aircraft-grade machined aluminum block chassis. I am amazed at its compactness and beauty. I'm only particular about the expressive power of the silent part, and the way the faint sound disappears is as clear as if you take your breath away. It's true that it makes me lament the warmth of human skin. Serial SE0950 (Fujisawa Yukishi)
Maintenance information: 2024.5.12 operation confirmed
Accessories: remote control, instruction manual, power cord
Main Specifications: Input Terminal Unbalance (RCA) 2 Systems/Balance (XLR) 2 Systems/Bypass, Unbalanced (RCA) 1 System Output Terminal Unbalance (RCA) 1 System/Balance (XLR) 1 System Input Impedance/Unbalance 48kΩ/Balance 48kΩ Dimensions W348 x H75 x D191 mm (maximum dimensions) Weight 4.2 kg
*Genuine Oba Shoji product. Although it is a low-end model, the integrated chassis made from a newly selected 6061 aircraft-grade hard aluminum block has an excellent design. The view is good, and the expression of silence gives a sense of comfort. There is a scratch on the front of the exterior. Serial SD1019 (Yonejima Satoshi)
Maintenance information: 2024.5.12 Operation confirmed.
Accessories: instruction manual, power cord
Main Specifications: Continuous Effective Output: 100W x 2 (8Ω) Frequency Band: 5Hz-65kHz, 3dB Dynamic Range: 110dBA Damping Factor: 1000 @1kHz8Ω Gain: 26dB Input Impedance: 40kΩ Input: Balanced (XLR) 1 System Output: 1 System (using CARDAS binding posts) Dimensions: W348 x H75 x D186 (mm) Weight 3.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 sales price 129,800 yen Sony 1TB HDD built-in audio player. It reproduces not only high-resolution sound sources such as DSD 5.6 MHz and 192 kHz/24 bits, but also compressed sound sources with high sound quality. If you install the software on your PC or smartphone, you can transfer and operate music data to the HDD. You can also enjoy CDs and MP3s ripped at home with high sound quality. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: remote control, instruction manual (simplified version), power cord, connection cord, original box
Main specifications: High-resolution sound source compatible internal HDD (1TB) playback compatible codec DSDIFF [DSD] /2.8 MHz/5.6 MHz) DSDIFF [DST] DSF/2.8 MHz/5.6 MHz) WAV/maximum 192 Hz/32 bit) AIFF/192 Hz/24 bit) FLAC/192 Hz/24 bit) ALAC/192 Hz/24 bit) WMA · MP3 · AAC · ATRAC (Non DRM) playback frequency Characteristics 2 Hz to 80 kHz audio output (XLR/RCA) EXT terminal (USB type A) W430 x H130 x D390 mm 14.5 kg
DL-103 limited model. “Class 1” LC-OFC wire, which boasts the highest grade of copper, is used for the power generation coil, and the body is made of a special ceramic fiber-reinforced resin with high rigidity, enhancing the purity of traditional monitor sounds. It has an even greater sense of range, and playback with excellent separation at high speed is possible (Murakoshi Yoichi)
Maintenance information: 2024.5.11 sound output confirmed
Accessories: needle cover
Main specifications: MC type 0.25 mV needle pressure 2.2 to 2.8 g Class 1 LC-OFC adopted
Maintained! A masterpiece of the UK Aura along with the original VA-40! Warm and high-quality sound quality has been achieved through thorough circuit simplification. The cleanliness of not using a protection circuit or even a relay switch is reflected in the sound, so you can enjoy clear and natural sound quality. There is a feeling of use such as disappearing characters and scattering on the front panel. Serial 010040 (Takasaki Atsushi)
Maintenance information: 2024.5.11 maintenance (INPUT selector slide SW disassembly contact polishing cleaning contact grease application, tape monitor entry and exit push switch replacement) 2024.1.20 operation confirmed
Accessories: copy of manual, power cord
Main specifications: execution output 50W+50W (8Ω) input/PHONO (MM), LINE 4 system, TAPE input/output equipment W430 × H56 × D313 mm 4 kg
The price has been reduced. 2024/5/12 sales price 128,000 yen Maintained! Line-only pre-main amplifier. The output stage is a single-ended, ultra-linear connection that makes the most simple use of the EL34. It has a gentle sound unique to vacuum tubes, and it can be said that it is an attractive product as an interior decoration. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 maintenance completed (main volume replacement, monitor switch replacement, cathode resistor replacement, solder correction, vacuum tube pin cleaning, bias check, each input and output check)
Accessories: instruction manual, cloth cover
Main specifications: output 12W+12W A grade single W275 x H165 x D375 mm 14.0 kg
Since it is cheap, it will be sold as is. SANSUI left and right independent 10-band equalizer. It is an equalizer that has a high amount of change and can drastically improve sound quality. The red LED for the slide volume is also nice, but above all, if you like the spectrum analyzer in the center, pay attention. The spare aner can switch back and forth between the 3 patterns of Lch, Rch, and both. The intuitive operation makes it easy to create sound quality, and it is a car that can also be enjoyed visually. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: center frequency 32 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz variable range ± 12 dB W430 × H112 × D223 mm weight 3.1 kg