Ferrite Core Noise Filters Set of 4 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Ferrite Core Noise Filters Set of 10 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Unspecified set of 4 banana plugs If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Set of 4 An ideal acoustic damping material (sorbosane) is used. It helps improve the sound quality of players, amplifiers, etc. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: load capacity 80 kg; size: diameter: 50/5 mm thick
*Set of 2 Acoliba RCA short pins. A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. It is not covered by the warranty even if the sound stops coming out or if it breaks down by any chance (Kobayashi Hitoshi)
Accessories: none
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker, amplifier, etc. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: original box
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
It is a USB-connected bus-powered D/D converter that uses the C-Media “CM6642” as the digital audio control IC and is compatible with high-resolution sound sources (maximum 24 bit/192 kHz) (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, original box
Main specifications: digital input: USB TypeB terminal USB 1.1/2.0 compatible, USBAudioClass 1.0/2.0 compatible digital output: coaxial digital audio output (COAXIAL) optical digital audio input (square) compatible format: PCM maximum 24 bit 192 kHz W40 x H25 x 81 mm 90 g
Set of 4 A beautiful banana plug with a no-waste design. Sound quality without loss is attractive (Daiki Goto)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Main specifications: insert pin, phosphor bronze body, copper alloy, non-magnetic rhodium-plated cable, suitable diameter ~ 5.5 mm, insert pin length 19.5 x diameter 4.3 mm, outer diameter 10.8 mm, total length 49.6 mm
Short plug for balanced input terminals. It can be inserted into an empty input terminal such as an amplifier or D/A converter to achieve a noise reduction effect. An item that also reinforces the back plate of the equipment, enhances damping against external vibrations, and greatly improves sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
By placing this plate between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Satoshi Yonejima)
Short plug for balanced input terminals. It can be inserted into an empty input terminal such as an amplifier or D/A converter to achieve a noise reduction effect. An item that also reinforces the back plate of the equipment, enhances damping against external vibrations, and greatly improves sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Set of 4 A beautiful banana plug with a no-waste design. Sound quality without loss is attractive (Daiki Goto)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Main specifications: insert pin, phosphor bronze body, copper alloy, non-magnetic rhodium-plated cable, suitable diameter ~ 5.5 mm, insert pin length 19.5 x diameter 4.3 mm, outer diameter 10.8 mm, total length 49.6 mm
Set of 4 Audio-Technica insulators with height adjustment It is a convenient item for leveling record players, etc. The exterior has dullness etc. (Satoshi Yonejima)
Accessories: No accessories
A wireworld RCA cable that uses OFC copper as the 1.0 m pair conductor of the RCA cable, perfect for a basic model. It is a cable with the feel of a wire world, with thickness in the mid range and glamor in the high range. As for the exterior, there is a screw on the plug (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Digital XLR cable equipped with a 1.2m hyperdigital isolator. The separation is good, and the sound quality is clean and sharp, typical of Saek. The exterior has dullness and disappearing characters (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box,
Optical digital cable 1.5m high sampling compatible model It is an optical cable that uses a special plastic material with high speed and high capacity, and is high quality for an optical transmission system SSI type, and is compatible with high sampling high speed links. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
The 2.0m RCA terminal stress-free 6ncU digital cable is bright and has an attractive character. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
RCA cable 2.0m pair, solid high resolution even though it is MIT entry class. The cable has just the right amount of sound pressure and is easy to use (Tamura Eiji)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
An entry model for the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
A stand for small speakers with a simple design. With a height of 57 cm, this stand is easy to use. Scratches, dullness, and a feeling of use can be seen on the exterior and top plate (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 50 kg, external dimensions W280 x H570 x D295 mm, top plate size W190 x D230 mm, weight approx. 4 kg
Mid-size model of 1.0 m XLO digital XLR cable. A unique cable that is smooth and has a high texture in the mid to high range, yet also has a high sense of sound pressure. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Optical digital cable 1.0 m. 41 pure quartz cables are bundled and stored in a metal flexible pipe. A stable optical cable that eliminates return light reflection, which is the cause of sound quality deterioration. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
The price has been reduced. 2024/6/9 sales price 10,000 yen ※Since the video has not been checked, it is currently on sale. Multi-function AV amplifier equipped with high sound quality surround circuit D.D.S.C. Digital, uses high sound quality technology AL24 Processing Plus for all channels, and is equipped with a high image quality 1080p compatible digital video interface HDMI. The exterior is dull and there are line marks on the front panel. Serial 7041502162 (Tomonori Asaine)
Maintenance information: 2024.6.8 Operation confirmed ※The video has not been checked.
Accessories: Remote control*LCD is dim, power cable
Main specifications: Equipped with a 192 kHz/24 bit compatible digital interface receiver, A/D converter, and D/A converter; Rated output: 8 ohms; 120 W x 7; size: W434 x H171 x D429 mm; weight: 18 kg
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please go back and forth on the label side 1 to 2 times (Daiki Goto)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
Perfect for use with the horn section of the JBL tweeter stand 075, 2405, 077. In addition to yellowing throughout the exterior, tobacco smell, dullness, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: mounting screws
Main specifications: W110 x H120 x D120 mm (actual measurement)
By converting light into magnetism with the 1.5m signal path of a digital RCA cable, the fate of digital, common mode noise is shut out! There is dullness on the plug (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Digital RCA cable 1.0m TARA LABS digital cable This cable is popular among enthusiasts for its clear and straight sound. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
USB cable The core model of the company's USB cable using a 2.0m S2AB Silver-Clad OFC conductor. If you switch from a general-purpose USB cable used for data, etc., you will be amazed at the three-dimensional, realistic, and dynamic sense of sound. Recommended for those who do not have an audio USB cable (Kojima Yosuke)
Accessories: none
Power cable 1.5m PSE standard product Uses “SUPRA LoRad,” a world-patented audio power cable developed by JENVING in Sweden. Neutral, unobtrusive sound quality. Compatible with a wide range of music genres. On the exterior, there is dullness on the connector (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/24 sales price 29,800 yen ※1 wooden horn is compatible not only with FOSTEX drivers, but also with JBL 1-inch drivers (stop 3 points). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Takahashi Nobuyuki)
Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch wood parallel plywood W444 × H90 × D293 mm 3.1 kg (actual measurement)
Power cable 1.5m PSE standard product Uses “SUPRA LoRad,” a world-patented audio power cable developed by JENVING in Sweden. Neutral, unobtrusive sound quality. Compatible with a wide range of music genres. On the exterior, there is dullness on the connector (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Case included. Y-lug exclusive banana plug set of 4 has a monocoque structure, so there is no deterioration in sound quality inside the plug. The entire body from the tip to the cable clamp is pink gold plated, so each contact part does not deteriorate even during long-term use (Oikawa Tetsuji)
Accessories: case
Main specifications: Compatible with Y-lugs of approx. 6 mm to approx. 8 mm
※Inexpensive because it is in poor condition. Currently sold. This is a tall boy model of the Reference41MKII. The tuning focuses on the mid-range, so you can enjoy it regardless of genre. You can see a feeling of use on the exterior, holes in the saran net, peeling veneer, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 Operation confirmed
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, 10W to 150W, 20 cm cone type, 10 cm cone type, medium range, 1 cm dome type, W254 x H870 x D307 mm, 16 kg
Digital cable 1.0m RCA terminal Teflon/air insulator A golden cross digital cable that strongly reflects the sound of Caldas. The sound is thick and rich, and removes the thinness of the digital system. On the exterior, oxidation and darkening can be seen on the terminals (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: instruction manual
Stress-free processing that maintains the atomic arrangement in a healthy state at all times due to the unique self-annealing of the 1.0 m pair of RCA cables. It is a cable that enables strict and extremely accurate digital transmission. On the exterior, there is a small scratch on the terminal (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
The price has been reduced! 2024/6/6 sales price 19,800 yen This graphic equalizer has excellent basic performance and a 2ch/31-band configuration that enables high-quality equalization with a 45mm fader. The inputs and outputs are electronically balanced, compatible with XLR, standard phone jacks (3P), and screw terminals, and a built-in power transformer. It helps with detailed sound quality correction, which is now valuable. The exterior is dull and has a feeling of use. Serial 01015239 (Tomonori Asaine)
Maintenance information: 2024.6.6 operation confirmed
Accessories: power cable original box
Main specifications: 31 bands 10Hz to 50kHz (+0.5/-3dB) 18W XLR x 2, TRS phone x 2, screw-locked input terminal W483 x H123 x D201 mm 5.1 kg
A standard wire world model with a wide 1.5m pair range and a smooth RCA cable. It allows you to enjoy music in the glossy, colorful mid- to high-frequency range. The exterior is dull and slightly sticky (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The exterior is dull. Serial 5997 (Yonejima Satoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Audio-only charging eraser. This is the 3rd generation developed through repeated improvements. The charge is reduced to zero by discharging even the slightest amount of static electricity to the human body more quickly. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: original instruction manual box
Main specifications: W345 x D340 x H25 mm
digital line transformer It has a 1:1.3 times boosting effect, and gives an analog-like thickness, good texture, and a sense of depth. It is recommended for those who want to make the CD sound more analog-like. Please use it by sandwiching it between the amplifier and CD player.
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: W124 x H80 x D170 mm 1.3 kg
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which combines resolution with a natural, good tone. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Set of 2 Hybrid audio board with wooden structure plus iron ball sand. The low frequencies, which are well-balanced and have a sense of volume, are tones that cannot be produced with a board such as granite. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: No accessories
Main specifications: load capacity 100 kg W300 x H44 x D 400 mm 5.5 kg/1 sheet
SP cable BW (Y lug → banana) 2.0m pair early 90s Synergistic Research
cable You can fully feel the sound unique to SOLID and thick Synergy with this entry cable. The exterior is dull due to aging (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. The logo plate is curved, and there is a large repair mark one step below (Oikawa Tetsuji)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
Set of 4 insulators It is effective for player and rack feet. There are scratches and bumps on the exterior (Tamura Eiji)
Accessories: none
Main specifications: height 19 mm x diameter 95 mm weight 109 g
Balance cable 1.0 m pair XLR cable using a huge network that is synonymous with MIT. The fact that the transparency is clearly increased is a word. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 1000061118 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Mid-range model of the 1.0 m pad digital RCA cable. A high CP model with excellent smooth, textured mid-high range and three-dimensional spatial expression. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories