A speaker stand that suppresses standing waves around the speaker by placing the speaker at an angle to the horizontal or vertical direction. Acoustical characteristics can be obtained so that the entire room is enveloped in sound. Comes with exclusive sorbocaine (Kojima Yosuke)
Accessories: none
Main specifications: bottom surface W125 x D125 mm top plate φ60 height 190/145/110/90 mm weight 1.5 to 1.6 kg (actual measurement) /book
Set of 4. Popular TAOC speaker base This stand is the best match for those using large speakers such as 4343. Uses high-carbon cast iron. There is no logo, there are scratches and stains (Takasaki Atsushi)
Accessories: none
Main specifications: W120×D400×H200mm 14kg/bottle
It's a small digital interface that fits in the palm of your hand. The input uses a Type-C USB interface. The output is I2S/optical/coaxial. The sampling rate is PCM32 bit/768 kHz compatible, DSD native, DOP64 compatible (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: original box, connection cable
Main specifications: W80 x H13 x D60 mm dead weight 120 g
High position small speaker stand High density compression boards are used, and rigidity can be expected. The round curved silhouette on the front side is also a point. There are abrasions in places (Kojima Yosuke)
Accessories: none
Main specifications: height 500 mm top plate W240 x D270 (W200 x D250) mm bottom plate W280 x D330 mm weight 6.0 kg/book
marble turntable seat Its own weight is approximately 1.8 kg, so it is recommended for turntables with high torque. The exterior has a feeling of use such as dullness and dirt (Takahashi Nobuyuki)
Main specifications: Weight 1.8 kg (actual measurement)
Unspecified record player cabinet. Unprocessed The double arm is also mountable, and the construction is solid. If you've been looking for one, please take this opportunity. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W602 x H145 x D535 mm 13 kg (actual measurement)
Set of 4 large insulators. The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
A multi-combination structure that allows you to select 7 weights by combining 3 types of stabilizers. It makes it possible to fine-tune the sound quality for each record, and it can also be used on record players that are not compatible with heavy stabilizers. (FUJISAWA KOSHI)
Accessories: instruction manual
Main specifications: W69 x H27 mm (when all parts are attached) under (polycarponet) 70g inner (brass+gold plated) 90g upper (brass+uredium plated) 160g
Tokyo soundproof turntable seat using vibration-absorbing rubber. The vibration convergence time is overwhelmingly fast, and it effectively absorbs unwanted vibrations in the frequency band that is important for music playback. (FUJISAWA KOSHI)
Accessories: case
Main specifications: size 4 mm thick x 291 mm diameter weight 330 g
Comes with original box! Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images. (FUJISAWA KOSHI)
Accessories: original box
This is a turntable sheet using TEAC Japanese paper. In order to solve the problem of dust adsorbing on vinyl records, Japanese paper that is less likely to charge electricity is used. We use stone paper with an appropriate amount of mass. (FUJISAWA KOSHI)
Accessories: case
Main specifications: W300 x H300 x D1 mm, weight approx. 44 g
This is an adapter for a NAGAOKA doughnut board. I use it for EP playback, but the machined aluminum gives it a sense of luxury. There is a small scratch. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: machined aluminum, diameter 40 x height 9 mm, weight 20 g
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place a needle. The LCD screen is backlit and equipped with an auto off function. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: original box, case
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece