Pair tube 45 Special/38142 compatible ball, direct heat triode, fishing rod type, filament measurement value 120/118 (rejection value 55) with original box ※ The pair was determined based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
※The continuity of the 5.0 m line cable has been confirmed for only 1 line cable. The exterior is beautiful with little feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.20 Confirmation Confirmed
Accessories: none
※Only 1 is an unopened item, the line cable is 5.0 m unopened and has not been checked, but this is the current situation (Kobayashi Hitoshi)
Accessories: original bag
MiniHDMI to HDMI converter cable 5.0 m Details are unknown, but it is a thin, lightweight cable that is easy to handle. The sheath smells like tobacco (Takahashi Nobuyuki)
Maintenance information: 2024.5.4 unchecked
Accessories: none
Pair tube, ambient heat beam tube, 5881 equivalent tube, made in America, JAN brown base measurement value 42/42 (rejected value 25) with white box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube 6CA7 compatible sphere Russian reprint model measurement value 52/48 (rejection value 30) white box with getter burn ※The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube 6CA7 compatible sphere Russian reprint model measurement value 46/42 (rejection value 30) white box with getter burn ※The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube metal brown base Russian dharma tube measured value 60/58 (rejected value 44) with white box, printing on one side often disappears ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
※Since there is no main unit, operation has not been checked. Nagaoka replacement needles. This is a TRIO N-39 compatible product. As for the exterior, the needle tip is slightly to the left (Hiroki Aso)
Maintenance information: 2024.4.7 operation unchecked
Accessories: none
Main specifications: Appropriate needle pressure 1.5g
Heater transformer spare sale primary: 105-115-125V secondary: 6.3V/5A (with CT) W49 × H69 × D45 mm 0.5 kg/piece (actual measurement, not including protrusions) with original box exterior, terminals It seems to be an unused item from the condition! (Kojima Yosuke)
Accessories: original box
An elaborate structural design and carefully selected materials that support the 6.0m pair of XLR cable transparent sensitivities have established the highest level of transmission quality required for audio cables. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.30 continuity confirmed
Accessories: none
Pair tube ambient heat beam tube made in Japan Hi-Fi measurement value 46/44 (rejection value 25) with original box (inner box/outer box) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: original box (inner box/outer box)
Pair tube triode for Hi-Fi made in Japan*Pairs are determined based on EM values measured with the test machine EM-604 (Yosuke Kojima)
Accessories: none
Pair tube, large beam output tube, 8147 compatible bulb, gray plate for Hi-Fi, with original box (outer box/inner box), has slightly decreased getter for both tubes ※ The pair measures and determines EM values with the measuring machine TC-162 (Kojima Yosuke)
Accessories: original box
TOPPING USB isolator This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
※1 bottle only. TOA large metal radial horn. In terms of sound quality, it has a narrower impression than Altec's sectional horn 311, but it has a bright sound with a sense of overhang unique to radial horns. *The diameter of the mounting hole seems to be slightly smaller than ALTEC, so there is a possibility that ALTEC's 1.5-inch drivers will not fit depending on individual differences. Overall, there are wounds, dullness, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: cross 500 Hz or more, horizontal 90 degrees, vertical 40 degrees, throat diameter 35.5 mm, compatible driver HFD-651, width 720 mm, height 220 mm, depth 580 mm, 10.9 kg
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for entry-level belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type