The price has been drastically reduced! 2024/5/23 sales price 198,000 yen ※This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve replacement. AC cord replacement Main bearing disassembly, bearing thrust replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing/added; nuts, metal washers, and rubber washers added. Running tests OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: No accessories
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. It also has good efficiency, so it's easy to play, and it features a chic design with a shiny mirror piano paint. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/21 sales price 99,800 yen DALI's HELICON series center speaker. If you use the company's HELICON series and are considering surround, please give it a try. The exterior is dull. Serial 7660180 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: original box, saran net
Main specifications: 4Ω playback frequency band 49Hz to 27kHz W650 ✕ H210 ✕ D435mm weight 18.4 kg
The price has been reduced! 2024/5/25 sales price 69,800 yen ※The exterior is in poor condition, so it's cheap. An upgraded model of PMC's small monitor DB1. It has excellent characteristics as a near-field monitor, and is characterized by good phase characteristics and rich spatial expression. It is a high-quality model that can be further upgraded by adding an amplifier. There are line scratches and bumps on the exterior. Also, there are cracks or tears in the urethane on the back. Serial 012503/012504 (Yonejima Satoshi)
Maintenance information: 2024.5.25 sweep test good
Accessories: saran net
Main specifications: 2 way 2 speakers, frequency characteristics, 50 Hz to 25 kHz, output sound pressure level, 87 dB, impedance, 8 ohms, dimensions: H290 x W155 x D240 mm (including grille), mass: 4.5 kg
Denon high-end MC cartridges in the heyday of analog, using amorphous boron pipes. A sound with a wide range and good separation, which has a different trend from the standard 103 series. This is the reference cartridge at the time. There is slight dirt and a feeling of use. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: instruction manual, needle cover
Main specifications: MC type output 0.2 mV 40 ohm boron cantilever solid diamond special oval needle playback band 20 to 75 kHz proper needle pressure 1.0 to 1.4 g dead weight 5.8 g
The higher model of the DL-103. Wide range was measured, and 20 Hz to 70 kHz was achieved. Delicate, wide, and powerful sound quality. There is slight dirt and a feeling of use. ※There is a note on the original box. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output 0.2 mV playback frequency 20 to 70,000 Hz impedance 40 ohms needle pressure 1.2 g dead weight 6.5 g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
※It is inexpensive because it is in poor condition, such as rust. Maintained! A vintage Lux Premain model. The 75W yet firm, extruded bass and thick, mild mid-high sound are lackstones themselves. Enjoy playing records with a tasteful sound. The exterior is serial 2503734 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (main amplifier circuit board solder correction. Switch and volume contacts corrected. Panel lamp replacement Output relay replacement. (I/O pin jack polish)
Accessories: No accessories
Main specifications: 75W+75W phono 1 system (MM/MC switching) line 2 tape systems, 2 tape systems, pre/power separable, W453 x H135 x D425 mm 13 kg
※1 bottle only. The diaphragm has been replaced with a D8R2421. It is an 8 ohm specification. Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 23890 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. (This is a genuine diaphragm, but it comes with D8R2421)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 8 ohms (3.8 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained! Comes with a remote control. This model was created by gathering the know-how of the Integra series. There are only models produced with a thorough emphasis on sound quality, which is a bit different from other Integra series, and has a relaxed, relaxed sound. The exterior has dullness, threads, and small scratches. Also, the SP terminal has been replaced. Serial 6301012428 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (disassemble the push switch and remote wire switch, polish the contacts, and apply contact cleaner. Volume contact correction. Remote control operation check OK)
Accessories: remote control, instruction manual
Main specifications: 155W+155W (6Ω) 120W+120W (8Ω) damping factor 400 (8Ω) frequency characteristics 2Hz to 100kHz W471 ✕ H170 ✕ D430 mm 26.6 kg
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
The price has been reduced! 2024/5/8 sales price 12,000 yen ※The exterior is in poor condition, so it's cheap. 1 bottle only Altec green horns were also used in the early A7. While it has wide diffusion characteristics, it is an attractive horn because it is easy to listen to where you can feel the core. The exterior is dull, scratched, and peeling paint (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 800Hz crossover frequency compatible driver 802-8D, 806-8A, 807-8A W470 × H220 × D340 mm 4.1 kg
Maintained! The successor to the C-220, which was particular about the phono equalizer. Models from the heyday of analog are notable models that focus on records. The deep, authentic sound quality of PHONO with good sharpness is attractive. The exterior is dull and has small scratches. Serial C4X515 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (contact cleaning due to poor main volume and balance volume. Due to poor contact with the compensation center switch in the sealing door, disassembly contact polishing contact grease was applied. Electrolytic capacitor replacement near the heating unit. (Check the operation of each input/output)
Accessories: power cord, copy of instruction manual
Main specifications: PHONO (MM/MC) line input 5 systems W466 x H153 x D385 mm 9.7 kg