Speaker cable, sold in 1, 4.0 m, 4-core structure, speaker cable included with LINN KIKO DSM systems, etc. It is a flat, natural cable with no habits unique to the company, and the luxurious sheath, which is comparable to advanced cables, is also attractive (Kojima Yosuke)
Accessories: none
The price has been reduced! 2024/4/27 sales price 25,000 yen small diaton 3-way bookshelf. It has a compact yet solid 3-way sound with a good balance from treble to bass. It has excellent value for money and is recommended for those starting out with audio or those looking for a subsystem. The exterior has a feeling of use such as dullness and small scratches. Serial 16122 16122 (Tomonori Asaine)
Maintenance information: 2024.4.27 Operation confirmed (confirmed that there is no edge deterioration)
Accessories: saran net
Main specifications: 3 way 3 speakers 90db W270 x H300 x D290 mm 4.0 kg (main unit only)
Genuine stand for B&W805 series It enhances the sound quality of the speaker and has an appeal unique to genuine products. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: instruction manual, mounting screw, spike holder (general purpose)
Main specifications: W275 x H600 x D370 mm 8.1 kg
The price has been reduced! 2024/4/28 sales price 398,000 yen A popular model equipped with a diamond tweeter that rewrote the history of the 800 series. The color is rose. The excellent stretch that penetrates the high range without habit and the sense of volume in the mid to low range, which has a strong presence, are appealing not found in the current D3. The exterior has dullness, small scratches, and stickiness on the bass reflex. Serial 0012701 0012702 (Asaine Tomoho)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: saran net jumper cable
Main specifications: 2 way 2 speakers bass reflex diamond dome tweeter 8 ohm crossover 4 kHz frequency characteristics 42 to 33 kHz W238 x H418 x D351 mm 12 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/20 sales price 198,000 yen ※It is cheap because there is dirt, cigarette smell, and part of the stay is broken. Comes with stand 2505! 2 inch horn+ lens with huge slant plate. As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. The exterior has line scratches and paint peeling. Serial 17862, 18641 (Fujisawa Yukishi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
The price has been drastically reduced. 2024/4/27 sales price 278,000 yen SACD/CD player. The younger brother of the X-01. Even though it's a younger brother, the sound quality is thin compared to the X-01, and it has a very high degree of perfection. Even though the sound is very clear, the texture does not fade, and the sound quality is well accompanied by a satisfying listening experience. Recommended for those looking for good esoteric sound. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: remote control, power cable
Main specifications: 2 analog outputs (XLR/RCA), 2 digital outputs (optical/coaxial) 5.1 channel, multi (I.Link), 1 system, word sync, 1 system, dimensions W442 x H153 x D353 mm, weight 23.5 kg
The price has been drastically reduced! 2024/4/27 sales price 178,000 yen rare item. Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 Inspection operation confirmed (when MC is input at 1 GΩ, ① knock down dip switch No. 2 No. 5 to the front side. It can be used by ② tilting the DIP Switch No. 1 and 6 to the front side ③ and inserting the short pin into the MM terminal). (MC input setting for current 330 ohm load) Operation was tested with each function for internal inspection of the main unit and power supply unit.)
Accessories: power supply unit, copy of instruction manual
Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg
The price has been drastically reduced! 2024/4/23 sales price 99,800 yen genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The price has been reduced! 2024/4/21 sales price 79,800 yen A masterpiece tuner equipped with an 8-stage varicon. It was introduced to the world as the first pulse-counting unit developed by Trio ahead of the rest of the world, and it is a model with a reputation for sound quality. You can get a sense of satisfaction just by turning the heavy tuning knob. Serial 530245 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: copy of instruction manual
Main specifications: FM dedicated tuner, equipped with 8 vari-controllers, W440 x H154 x D393 mm, 11.5 kg
The price has been reduced! 2024/4/25 sales price 59,800 yen Maintained! Comes with a cabinet. Accuphase quartz rock synthesizer FM tuner. A pulse tuning system is used that enables manual station selection with the same feeling as the varicone system. You can enjoy sharp and clear sound typical of Accuphase. The exterior has bumps, scratches, etc. Serial JOY347 (Yonejima Satoshi)
Maintenance information: 2024.4.25 Maintained (jumper wire connection due to disconnection of the tuning circuit. System control board corrosion repair pattern check. (Check reception)
Accessories: instruction manual, power cable
Main specifications: synthesizer FM tuner reception frequency 76.1 MHz to 89.9 MHz tuning system quartz rock frequency synthesizer system manual pulse tuning memory 6 stations W445 x H128 (including legs) x D370 mm 8.4 kg
The price has been drastically reduced! 2024/4/20 sales price 69,800 yen This is the first arrival at the A100BT5.0 Hi-Fi Hall, the top model of the company's A80. The color is red high gloss with a luxurious high-gloss finish. The sound is very loud and has an extruding effect. There are plenty of input/output interfaces, and the wired USB is compatible with optical digital input, analog audio input, subwoofer output, and Bluetooth with aptX, a high-quality sound codec using the Qualcomm Bluetooth v5.0 chipset, making it easy to use. There are no noticeable scratches on the exterior. Serial 496000712560 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, power cord, connection cord
Main specifications: DAC built-in active speaker output 40W x 2 input (digital) USB/Optical/Bluetooth (analog) RCA size W160 x H283 x D255 mm weight 5.5 kg
The price has been drastically reduced! 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8000 Hz maximum input 40 W 8 Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
The price has been drastically reduced! 2024/4/26 sales price 178,000 yen Maintained by TEAC! VRDS-25 rigid menism final model. This is a popular model used by JAZZ/ROCK fans with a strong housing and a highly accurate VRDS mechanism, and has high resolution and clear contours. Spikes are attached to the solid 8 mm thick bottom plate, and the excellent construction with an excellent sense of reliability is also attractive. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.26 Maintained (All parts have been inspected. We have confirmed wear on the tray belt, clamp belt, and turntable bearings. Tray belt, clamp belt, and turntable bearing replacement. (Check operation by cleaning and lubricating the pickup and mechanical parts)
Accessories: Remote control instruction manual copy
Main specifications: multi-bit DAC, 25 bits, 8 times oversampling digital filter, W442 x H145 x D344 mm, weight 23 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/25 sales price 198,000 yen manufacturer maintenance completed! Tubular premain amplifier equipped with 300B. In addition to combining a vacuum tube with a modern design, it is easy to use with easy bias adjustment. Since it can also be used as a power amplifier using the PRE-IN terminal, it is also recommended for those considering separating them in the future. Serial 05050050 (Hiroki Aso)
Maintenance information: 2024.4.25 Maintained (maintenance including restoration of the contact point of the selector polishing volume ※ vacuum tubes can still be used, but they have deteriorated appropriately over time, so please understand that this is a current product)
Accessories: instruction manual copy power cable
Main specifications: maximum output 18W+18W (8Ω) vacuum tube 300B/A grade push-pull input terminal input RCA4 system
(4 rear systems, 1 tape out system) output terminals 6/8/16 ohm, 1 system each, TRIODE original 300B power consumption 220W size 440 x depth 320 x height 200 mm weight 20 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/10 sales price 69,800 yen Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: output 45W+45W (8Ω, Class B operation) 10W+10W (8Ω, Class A operation) 20Hz-20kHz power consumption rating 190W maximum 300W external dimensions 436 x H144 x D323 mm weight 13.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/29 sales price 99,800 yen Maintenance completed! The design full of oldies is attractive, and Newcam's mono mixer premain for PA. 6L6 is used as the output tube. Channel 1 is compatible with LINE, PHONO, and MIC, and channels 2 to 4 are compatible with microphones. The volume for each channel is around 12 o'clock, and MASTER is used for volume adjustment. There is a feeling of use such as small scratches and paint deterioration appropriate to the exterior model year (Kobayashi Hitoshi)
Maintenance information: 2023.12.12 maintenance (master volume disassembly, cleaning repair, contact repair for each part such as MIC input transformer, etc., left side front lamp off, 12AX7, 150 μF electrolytic capacitor replacement. Vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 41 to 61 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Main specifications: 6L6 push-pull 60W mono LINE, 1 PHONO system each, MIC4 system W440 x H190 x D350 mm 16.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/25 sales price 19,800 yen ※There is no problem with operation, but it is cheap because there is a lot of rust. LUXMAN's thin synthesizer tuner. The design matches the Luxman Primaine from the 80s, and has a nostalgic, nostalgic atmosphere. The exterior has dullness, small scratches, and rust, and there is a feeling of use, as the power cable has been changed to an external product. Serial G2701694 (Hiroki Aso)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: FM/AM tuner FM tuner part S/N stereo 80dB selectivity NARROW (±300kHz) 80dB
WIDE (±400kHz) 65dB AM tuner part S/N50dB dimensions W453 x H87 x D344 mm weight 4.8 kg
The price has been reduced! 2024/4/27 sales price 23,000 yen This is a standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Asaine Tomoho)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
The price has been reduced. 2024/4/26 sales price 20,000 yen A convenient speaker selector that can connect 3 sets of speakers to 1 amplifier. Also, it is possible to switch between 3 amplifiers for 1 set of speakers. A simultaneous bipolar switching system has been adopted, and low contact resistance has been achieved by silver plating on the switch contacts and gold plating on the terminals. There is dullness and strong discoloration in the terminal (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: W250 x H60 x D150 mm 1.2 kg
The price has been drastically reduced. 2024/4/27 sales price 148,000 yen The current studio monitor 4309 equipped with the latest sound technology has arrived. A ring radiator type compression driver similar to the higher-level model is used for the medium to high range unit. It is also highly capable as a desktop monitor. There are repair marks on the exterior and top plate, and a feeling of use such as dullness can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper, manual, original box
Main specifications: 2-way bass reflex type nominal impedance 4 ohms output sound pressure level 87 dB frequency characteristics 42 Hz to 30 kHz crossover frequency 1.6 kHz W260 ✕ H419 ✕ D227mm 11 kg
The price has been reduced. 2024/4/26 sales price 19,800 yen ※There is wobble on one side, so it's cheap. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
The price has been reduced. 2024/4/24 sales price 69,800 yen ※Since the digital input circuit module cannot be repaired, the digital input cannot be used. Maintained! Kenwood pre-main amplifier. It plays clear, transparent mid-high frequencies and low frequencies with a firm sense of power typical of Kenwood in a well-balanced manner. There is an air cap mark on the top of the front panel. (KOBAYASHI Hitoshi)
Maintenance information: 2024.4.24 Maintained (input board connector correction, switch correction, contact correction, operation confirmation) 2023.5.21 Maintained (display lamp replacement. Switch and volume contact correction. (*The digital circuit module is broken, but the digital input cannot be used because it is not available)
Accessories: none
Main specifications: 150W+150W (8Ω) phonomC/mm mounted damping factor 1000 W 476 x H170 x D424 mm 19.7 kg
The price has been reduced. 2024/4/17 sales price 34,800 yen ※Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price. Inside Force Canceller B is out of stock
Maintenance information: 2024.4.13 sound output confirmed
Accessories: phono cable
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
Pair tube 6SN7 compatible ball smoke made in England lot: 1185 MXA/1185 MXA measured value 64/64 (rejected value 50) with white box*Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube 6SN7GTY compatible ball tea base smoke code: unknown measured value 98/94 (rejected value 50) printing with castle box is erased ※ pair is determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube Russian lot: 0202/0107 measured value 36/36 (rejected value 25) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube 6L6WGB compatible ball Russian short base measurement value 42/42 (rejected value 25) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. As for the exterior, the cork around the frame has deteriorated (Mizusaki Ryo)
Maintenance information: 2024.4.28 Maintained (edge holes repaired with rubber adhesive, edge wood chips removed, center cap removed and dustproof net glued, magnetic circuit slit cleaned, rust prevention, coil bobbin center removal)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
Maintained including the creation of a new dust cover! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
※The felt is attached upside down. Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. Only 1 out of 4 has butyl rubber attached to the inside. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
KRIPTON line transformer. Use it by placing it between the CD player and the control amplifier. It changes smoothly into expressive power, so it is also suitable for long listening. There are some tape marks on the exterior. Serial 0607119 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main specifications: frequency characteristics 10 Hz to 100 kHz W135 x H90 x D126 mm, weight 1.2 kg
Built-in digital input board. Digital music signals from digital devices can be input. Equipped with coaxial and optical fiber input terminals. There is a feeling of use such as dullness. Serial G2Y425 (Takasaki Atsushi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
Main specifications: Sampling frequency 32 kHz to 96 kHz, 24 bit digital input optical, 1 coaxial system, automatic switching between coaxial/optical input, equipped with automatic recognition function for sampling frequency, bit rate, and de-emphasis compatible models C-2000, C-245, CX-260, E-213, E-307, E-308, E-408, E-530, E-550
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
Uses 1.0 m pair of RCA cables PSC+ (Perfect Surface Copper Plus) made of copper. Polyethylene air tube insulators are used. The sound is tight throughout the entire area, and the delicate expression is also amazing (Mizushima Itsuro)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: original box
A record stabilizer that can be used properly with an LP/EP board on the front and back. There is a hole so that the EP adapter fits, so you can use it while attached (Mizushima Itsuro)
Accessories: none
Main specifications: zinc alloy diameter 70×H35mm 710g
The 2.0m OFC 0.18 x 140 conductor is twisted and an aluminum shield is applied to the inner circumference of the 3.5 mm x 2 sheath. Uses natural cotton thread as a countermeasure against static noise (Mizushima Itsuro)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
An outlet plate made of 5mm thick machined aluminum alloy with a beautiful surface treatment unique to ORB. The play structure and physical properties with excellent stability express sound quality that is crystal clear and speedy than ever before (Mizushima Itsuro)
Accessories: bag, screws
Main specifications: UL standard product (cannot be used with JIS standard outlets)
Krypton outlet plate By tightening the 3-layer neo-fade carbon matrix material with a stainless steel frame, it is designed to have ideal damping characteristics without resonance/vibration. You can bring out the merits of high-resolution sound sources, etc. (Mizushima Itsuro)
Accessories: original box, screws
Main specifications: W70.4 x H114.4 x D4.0 mm approx. 50 g
It is an outlet cover with a stainless steel base, a beautiful finish made of carbon and glass fiber damping material, and a vibration suppression effect due to the hybrid structure (Mizushima Itsuro)
Accessories: original box, screws
Main specifications: Dimensions 71 x 116 mm, weight 71 g (actual measurement)
Since it is said that electrode resonance is attenuated and rectified by combining multiple different materials such as phosphor bronze, brass, aerospace-spec aluminum alloy, and natural smoky quartz as materials, it seems that the effect can be realized if you try it by attaching a clean power source to an outlet, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 37 mm, cover length 63 mm
A 6cm full range is mounted in an enclosure that reproduces JBL's masterpiece Paragon in a small size. The back road horn and rear leg height can be adjusted, so it's quite elaborate (Murakoshi Yoichi)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: 6cm full range, 8Ω, W527 x H160 x D145 mm, 2.4 kg
Speaker cable, 8.5 m pair terminal, banana - QED 40th anniversary model, cylindrical 6-core structure, has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Key Specifications: Comments in progress
※There is a tear in the coating at the base of the terminal, so it's cheap! Speaker cable 5.0 m pair terminal banana QED 40th anniversary model cylindrical 6-core structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
A 5-tier rack made of full-body solid natural wood with beautiful Asahi wood processing. We use 30mm thick solid natural wood for the top plate and bottom plate, and 25mm thick for the shelf board. The generous load capacity of 100 kg for the top plate, 50 kg for the middle shelf, and 150 kg for the bottom plate is unique to ADK, which has a sturdy structure. There is a slight scuff on the top plate. (Yamato Yuki)
Accessories: none
Main specifications: load capacity 100 kg, height adjustable with 3 shelves, 3 upper shelves, 5 lower steps (30mm pitch) dimensions W619 x H861 x D520 mm weight 41 kg
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
Speaker cable 1.0m pair terminal banana QED 40th anniversary model. The 6-core cylindrical structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Set of 4 speaker stands Block type can be installed either vertically or horizontally. It is a very convenient and useful item for installing medium sized speakers, etc. There is a feeling of use on the exterior, such as dullness or peeling of the outer sticker ※ There is content like sand inside (Asaine Tomoho)
Accessories: none
Main specifications: Scythe W110 x H190 x D390 mm weight 6.6 kg (actual measurement)