SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm height 7 mm weight 47 g (actual measurement)
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please do it 1 to 2 times on the label side first, front to back. There is dullness (Daiki Goto)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
※ It can be used without problems, but since future repairs are not possible, it is sold as is without warranty. 100V specification Reference power supply. This is a high quality AC generator that produces a clean, low distortion power supply. The 5 zones are isolated, and since mutual interference does not occur between each zone, the interference of each device can be completely shut out. By switching modes, you can check the voltage/distortion rate during input and voltage/distortion rate during output in real time. Stains and stains are conspicuous on the top plate. Serial 8L0159 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (English characters), power cord, mounting hardware
Main specifications: output 1500 VA output outlet, 5 zones, 10 ports, size W425 x H104 x D413 mm, weight 15.9 kg
The price has been reduced! 2024/4/20 sales price 20,000 yen Fisher (male) terminal pair. Great for 3-pin CELLO and VIOLA users. There is a feeling of use on the exterior such as scratches (Tomonori Asae)
Accessories: No accessories
The price has been drastically reduced. 2024/4/20 sales price 248,000 yen Genuine AC is out of stock. An esoteric isolation transformer. Stress-free 6N copper wire is used as the coil wire. We are pursuing the ultimate clean power supply environment by using the same extra thick 6N copper single wire for internal wiring. In addition to scratches on the exterior and top plate, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmation (power can be turned on)
Accessories: instruction manual
Main specifications: maximum rated power 1,500 W, number of outlets 6 external dimensions W246 x H219 x D422 mm, mass 31 kg
MICRO's rare copper turntable seat. The sound has the sharpness and sense of speed peculiar to metal. The exterior has line scratches on the surface (Sasaki Shota)
Accessories: none
Main specifications: dimensions 294 in diameter x 3 mm in thickness, weight 1.65 kg
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please do it 1 to 2 times on the label side first, front to back. There are scratches and scratches on the exterior. Serial T912 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: power cord
Main specifications: W160 x H58 x D195 mm weight 882 g
This set of 8 brass (brass) spike receivers is familiar with its natural, thick, brass-like character. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: diameter 40 mm x 8 mm 72.5 g
Enacom series cable terminator. It has the effect of eliminating ringing distortion in speaker cables. The signal-to-noise ratio is increased, and quiet sound quality can be obtained. (FUJISAWA KOSHI)
Accessories: No accessories
PSE certified product. The successor model to the 4-port 3-pin power strip with a cable length of 1.0 m, and a heavy steel tap. Sound resolution has been further improved by further improving shield performance compared to the previous model (Fujisawa Yukishi)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: No accessories
Main specifications: W120 x H120 x D50 mm 1.65 kg (not including cable part)
PSE certified product. Successor model to the 2-port 3-pin power strip with a cable length of 1.0 m, and a heavy steel tap. Sound resolution has been further improved by further improving shield performance compared to the previous model (Fujisawa Yukishi)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: No accessories
Main specifications: W75 x H120 x D50 mm 0.9 kg (not including cable part)
When connected to a speaker, it reduces speaker impedance fluctuations in the mid to high range. More faithful speaker driving is possible, speaker resolution and stand-up are improved, and natural afterglow is also reproduced. There are scratches on the exterior. Serial 00753, 00754 (Fujisawa Yukishi)
Accessories: instruction manual, original box
Main specifications: W100 x H47 x D117 mm approx. 190 g/piece
Genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/28 sales price 6,000 yen This is a subweight (small) common to the AC-3000/AC-4000 Craft Arm. A rare item that is hard to obtain now. Recommended for those who didn't have it or those who lost it (Oikawa Tetsuji)
Accessories: none
Main specifications: actual measurement 12g
Line transformer using TANGO's input transformer, NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70 H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)