The disposal price has been reduced! (Member discounts are not applicable) 2023/5/11 sales price 148,000 yen The BBC monitor speaker is equipped with an in-house manufactured unit based on the LS3/5A, and the phase characteristics and frequency characteristics of the mid to low range, and the responsiveness of music signals have been greatly improved. You can listen to calm traditional English sounds. The exterior has a feeling of use such as dullness and small scratches. Serial 206B08481 206B08482 (Tomonori Asaine)
Maintenance information: 2024.5.11 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers sealed crossover 5 kHz impedance 8 ohms frequency characteristics 75 Hz to 20 kHz output sound pressure level 84 dB input terminal 4 mm terminal bywire compatible W165 ✕ H305 ✕ D 190 mm weight 4.6 kg
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
Speaker system with 2 French Suprabox field type full range 215EX units and 40cm woofers 400-2000EXC. It combines a sense of speed that makes it impossible to return to a permanent magnet, and an audible response. In addition to small holes scattered on the exterior and top plate, a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 sound output confirmed
Accessories: dedicated power supply unit, connection cable, power cable
Key Specifications: 2 way 3 speakers W600 x H1200 x D270 mm
D/A converter compatible with sampling frequencies from 22.05 to 192 kHz. The sound is straight and direct, with perfect resolution and penetrating power. The sound suitable for JAZZ/ROCK, which is currently hard to see, is attractive. There are thin threads on the exterior. Serial 091210022 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main Specifications: Compatible Frequencies: 22.05 to 192 kHz Compatible Formats: PCM 2CH Stereo 16 to 24 Bits Digital Input: Coaxial x 3, Optical x 3 System Equipped Analog Output: XLR x 1, RCA x 1 System Equipped W420 x H98 x D233 mm 5.2 kg
The price has been reduced. 2022/7/4 sales price 12,000 yen 2.5mm plug specification for genuine balance cable for IER-Z1R. Shafts have been exchanged with perfect accuracy. If you have an DAP with a 2.5 mm balance terminal such as Astell&Kern, this is for you. (SASAKI Shota)
Maintenance information: 2022.7.4 sound output confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 sales price 129,800 yen Sony 1TB HDD built-in audio player. It reproduces not only high-resolution sound sources such as DSD 5.6 MHz and 192 kHz/24 bits, but also compressed sound sources with high sound quality. If you install the software on your PC or smartphone, you can transfer and operate music data to the HDD. You can also enjoy CDs and MP3s ripped at home with high sound quality. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: remote control, instruction manual (simplified version), power cord, connection cord, original box
Main specifications: High-resolution sound source compatible internal HDD (1TB) playback compatible codec DSDIFF [DSD] /2.8 MHz/5.6 MHz) DSDIFF [DST] DSF/2.8 MHz/5.6 MHz) WAV/maximum 192 Hz/32 bit) AIFF/192 Hz/24 bit) FLAC/192 Hz/24 bit) ALAC/192 Hz/24 bit) WMA · MP3 · AAC · ATRAC (Non DRM) playback frequency Characteristics 2 Hz to 80 kHz audio output (XLR/RCA) EXT terminal (USB type A) W430 x H130 x D390 mm 14.5 kg
Sony Theatre System Tallboy Speaker The sweep test is good, but since the corn paper has dents, it is currently sold at a low price. This speaker is easy to use with both front and rear speakers. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.3.18 Operation confirmed
Accessories: nothing
Main specifications: W60 x H1050 x D60 mm bottom 250 mm weight 3.4 kg (actual measurement)
*Currently sold. Details of only one Sony 15 cm full range unit are unknown, but there is an I-502-437-11 description on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
Optical angle/optical mini plug - light angle/optical mini plug cable 1.0m exterior, the cord attached to the adapter is broken, and it is sticky, dull, and feels used (Kobayashi Hitoshi)
Maintenance information: 2024.3.31 continuity confirmed
Accessories: original box
The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso)
Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test)
Accessories: copy of instruction manual
Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
*We were able to confirm the simple sound output, but since it is cheap, it is currently sold. A 2.1 channel (wireless subwoofer) system developed to match the company's Bravia X9000F series. The S-Force PRO front surround mechanism virtually creates a three-dimensional stereoscopic sound image without installing a rear speaker. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.13 Operation confirmed (video, remote control, simple BT sound)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: 2.1 ch maximum power output 300W front 100W/100W subwoofer 100W size: bar speaker W930 x H58 x D85 mm 2.5 kg subwoofer W190 x H382 x D387 mm 7.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/5/30 sales price 12,000 yen. Simple conduction has been confirmed, but the details have not been checked. Sony electret condenser microphone Can be used with AA batteries (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple conduction confirmed
Accessories: instruction manual, case, windscreen x 2, holder clip
Main specifications: frequency characteristics 40 to 15,000 Hz omnidirectional 250 ohms maximum input sound pressure level 122 dB
A plug adapter that converts a micro jack to a stereo mini plug. It is convenient for converting plugs into headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: total length 8 cm
The price has been reduced. 2024/5/4 sales price 39,800 yen Speaker developed in collaboration with an Italian furniture manufacturer. The sound is delicate and calm, and it is a speaker that allows you to soak in the music for a long time. In addition to corrosion on the exterior and terminals and stains on the saran net, a feeling of use can be seen such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 2 speakers, bass reflex, bookshelf type, anti-magnetic design, 45 Hz to 30 kHz, 86 dB, 8 ohms, W230 x H350 x D335 mm, 9.5 kg
*Currently sold. Details of Sony's 15 cm full range unit pair are unknown, but there is a description of i-502-437-11 on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
Micro jack to stereo mini plug adapter It is used when converting a micro plug to a stereo mini plug. There are cracks in the plastic packaging due to aging (Murakoshi Yoichi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: package
The price has been drastically reduced. 2024/5/12 reprint model of the famous MINIMA with a sales price of 298,000 yen. The unique expanse and colorful sound transcends the boundaries of compact speakers. If you set it slightly away from the wall, a deep sound field space will be drawn. The beautiful wood grain and good texture are also attractive. There are small scratches on the side etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, cover
Main specifications: 2-way speaker bass reflex type frequency characteristics 55 Hz to 25 kHz impedance 8 ohms output sound pressure level 84 dB W200 x H330 x D275 mm weight 6.9 kg
M/MC compatible A tubular phono equalizer developed with the aim of better analog reproduction. You can enjoy a warm, natural sound using a vacuum tube non-feedback amplifier and a CR-type equalizer. The impedance can be switched according to the cartridge. Externally, there are line scratches on the top plate. Serial 00180 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cable
Main specifications: MM/MC compatible 12AX7 (ECC83) x 2 W300 x H100 x D260 mm 4.8 kg
Shure's final high-end cartridge model. It has a smooth sound that is different from the thick, jazz-friendly series, and vocals and classical music are carefully reproduced. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: mm type oval needle frequency band 20 Hz to 22 kHz needle pressure 0.75 to 1.5 g (appropriate 1.25 g) dead weight 7 g
※ The stylus is a genuine SHURE VN35HE. The lock on the needle cover doesn't work, so it's cheap. Good needle tip! It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
This is a phono equalizer amplifier using FET. Excluding local feedback, the overall CR type circuit configuration is compatible, and MM/MC switching is handled by first-stage FET gain switching. The sound is neutral and unobtrusive. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cable
Main Specifications: Input Terminal Unbalance (RCA) 1 System Output Terminal Unbalance (RCA) 1 System mm3mV MC0.25mV W102 x H112 x D209 mm 1.0 kg
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
OTTO ST-7D stylus For MG8, MGT-2, and MGT42K It seems unused, but it's junk because the needle hasn't come out of the body due to deterioration of the damper. Please use it as a parts remover. There is dullness on the exterior ※ member prices are not applicable and there is no guarantee for junk items, and they are sold as is (Kobayashi Hitoshi)
Maintenance information: Operation unconfirmed (the cantilever has sunk due to damper deterioration. (As for junk items, they will be handed over as is.)
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
OTTO ST-4D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Maintained. This model has been reproduced by utilizing Sansui's technology down to the smallest detail. It's a bold sound, but it also has a very clear outline and is also delicate. There are plenty of pleasant sounds of jazz, rock, soul, etc. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.14 Maintained (switch dismantling and polishing grease, etc. applied (tone, loudness, muting, subsonic, turnover, power amplifier direct, source direct, reck-out, tape switch), balance volume replacement, output relay, headphone relay replacement, power amplifier section transistor adjustment volume replacement, protector capacitor replacement , solder repair, volume, switch cleaning, interior and exterior inspection and cleaning, bias, DC adjustment, operation confirmation. (Balance volume is a reusable product)
Accessories: copy of instruction manual
Main specifications: effective output 6Ω160W+160W, 8Ω130W+130W power amplifier direct circuit (with both balanced and unbalanced inputs) PHONO (MM/MC) dimensions W460 x H159 x D446 mm weight 22.5 kg
Since it is cheap, it will be sold as is. SANSUI left and right independent 10-band equalizer. It is an equalizer that has a high amount of change and can drastically improve sound quality. The red LED for the slide volume is also nice, but above all, if you like the spectrum analyzer in the center, pay attention. The spare aner can switch back and forth between the 3 patterns of Lch, Rch, and both. The intuitive operation makes it easy to create sound quality, and it is a car that can also be enjoyed visually. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: center frequency 32 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz variable range ± 12 dB W430 × H112 × D223 mm weight 3.1 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
Maintained! A popular model from late Sansui. While promoting wider range, the sound that feels the depth and energy unique to the company is compatible with modern speakers. The punching power in the mid to low range that drives a medium bookshelf speaker is truly a word. There is a feeling of use such as dullness and abrasions (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/TONE, loudness, subsonic, processor, input selector, power amplifier direct, source direct, tape, reckout switch disassembly, polishing grease application, output relay replacement, power supply capacitor replacement, solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 90W+90W NEW HYPERα-X balance circuit PHONO (MM/MC) power amplifier with direct function W430 x H162 x D452 mm 18 kg
Maintained! 15th anniversary model of the 607 series. MOS-FET is used for the power stage, adding a sense of transparency to its characteristic heat, and is compatible with various music genres. It has a configuration that exceeds its class, such as balanced input support, and it is a powerful machine that is still popular today. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 maintenance completed (tone and other switches dismantled and polished, coated with grease (loudness, muting, processor, subsonic, input selector, power amplifier direct, source direct switch), output relay replacement, protector part capacitor replacement, solder repair, internal inspection and cleaning, bottom repair, operation confirmation)
Accessories: power cable, copy of manual
Main specifications: 45W+45W (8Ω) PHONO (MM/MC) W460 × H159 × D446mm 18.8 kg
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.20 Maintained (The mechanical fixing parts were manufactured and replaced in 1 pair. The clamper and loading belt have been replaced. The velocity coil has been repaired and corrected. (The tact switch on the operation panel has been replaced)
Accessories: remote control
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
RCA cable, 1.0 m pair, 6N ultra-pure copper and 70 specially twisted hybrid structured conductors with OFC copper, an R resonator is attached as a damping function based on a new concept, and the plug is an original collect chuck. It is a natural, highly transparent sound quality with few SAEC habits (Shota Sasaki)
Maintenance information: 2024.4.21 sound output operation confirmed
Accessories: none
The price has been reduced! 2024/5/9 sales price 8,000 yen RCA cable 0.7 m pair 6N copper+OFC hybrid collet chuck plug There are no prominent characters, and it is a cable that naturally makes you enjoy music. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 6N ultra-pure copper and 70 specially twisted hybrid structured conductors with OFC copper, an R resonator is attached as a damping function based on a new concept, and the plug is an original collect chuck. It is a natural, highly transparent sound quality with few SAEC habits (Shota Sasaki)
Maintenance information: 2024.4.21 sound output operation confirmed
Accessories: none
Balance cable, 0.7 m pair, PC-Triple C conductor, conductor with stable electrical characteristics such as ultra-low distortion ratio and high conductivity, and double shielding for perfect noise countermeasures. It has an edgy, well-cut sound using a gold plated plug made by Neutrik. The lettering is frayed and thinned. (FUJISAWA KOSHI)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: No accessories
SAEC long-selling model with a 0.6 m digital cable. 6N ultra-high purity copper with excellent transmission characteristics is used as the conductor material, and transmission loss is reduced with accurate impedance matching (Tamura Eiji)
Maintenance information: 2024.4.4 continuity confirmed
Accessories: none
Mark 2600 is famous, and you can't underestimate this either. The power is modest compared to the 2600, but I also like the clear, powerful sound and rugged design. There are dents on the exterior and upper right grill, and a feeling of use can be seen such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: none
Main specifications: 100W+100W (4Ω to 8Ω) W481 x H142 x D246mm 10 kg
A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
The price has been reduced! 2024/5/11 sales price 79,800 yen A player equipped with a DAC chip Wolfoson WM8740 with 192 kHz/24 bit resolution, and has strong expressive power and tends to sound straight. The exterior has a feeling of use such as dullness. Serial 704-3341068 (Tomonori Asaine)
Maintenance information: 2024.5.11 operation confirmed
Accessories: remote control power cord
Main specifications: W431 x H104 x D320 mm 7.4 kg
SONY ND-200G equivalent Replacement needle for XL-20G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
SONY ND-138G equivalent Replacement needle for VL-38G It has been opened, but since there is no target cartridge, operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Super sapphire needle for Rectany Ronette type LP It has been opened, but since there is no target cartridge, operation has not been confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. It is an attractive amplifier with a maximum output of 100W during 4-channel operation, and the strength unique to commercial use. There is a feeling of use such as scratches and dullness on the exterior as a whole (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W x 4 (8 Ω continuous output) 100 W x 4 (4 Ω continuous output) 200 W (BTL 8 Ω continuous output) W480 x H88 x D417 mm weight 12.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/13 sales price 128,000 yen ※The PHONO board is for MC only (MM cannot be used). Maintained! It has an elegant and glossy tone, and although combinations with 405 are common, 606 etc. are also a good match. It has the natural texture of the acoustic sauce and the smooth tone that feels good against the skin. There are small scratches and paint peeling on the right side. Serial 24151 (Takasaki Atsushi)
Maintenance information: 2024.4.12 maintenance (main board ground point screw reprocessing, operation check) 2024.1.17 maintenance (replacement of coupling C, bypass C, etc. in each board, AC SW spark killer C replacement, INPUT switching analog SW through hole pattern re-soldering, power SW internal contact polishing ~ operation check)
2020.6.13 Maintained (balance VR, SW disassembly cleaning. Attach 1 kΩ resistors to both the left and right sides of the flat board. Replaced due to faulty IC. All flat and mother boards have been soldered again. (Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting the power amplifier to confirm normal operation.)
Accessories: power cord, copy of manual
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 25,000 yen*Since the output terminal has been remodeled to an XLR terminal, it is inexpensive. It is a pretty niche product that uses 2 stereo amplifiers so that it can be used like a mono amplifier. Actually, it seems to be a product intended for use with the company's 405-2. There is a lot of dullness on the exterior due to aging (Fujisawa Yukishi)
Maintenance information: 2023.6.4 sound output confirmed
Accessories: none
Main specifications: W80xH47xD140mm approx. 1.0 kg/unit