A low price pre-main amplifier that allows you to enjoy Marantz-like sound. How about it as an introduction to audio or as a subsystem, etc. There is a feeling of use such as scratches and dullness
Maintenance information: 2024.4.1 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: W440×H124×D340 mm 7.5 kg
Maintained! A pre-main amplifier with Class A operation that allows you to enjoy sharp sound. The moderate amount of extrusion is comfortable, and this model is suitable for jazz and rock. The exterior has small scratches and dullness appropriate for the model year (Daiki Goto)
Maintenance information: 2024.1.22 maintained (balance volume (replacement) replacement, output relay replacement, input selector, reck-out, MM/MC switching, MONO, loudness, CD direct switch disassembly polishing grease application, solder repair, other volumes, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) input 6 systems PHONO (MM/MC) quarter A amplification method using CD/PHONO direct switch W462 x H164 x D376 mm 14.3 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. Remote control is missing. AM/FM stereo tuner with dual-gate MOS FET on the front end. The tone is bright and natural. There is rubbing near the power button (Sasaki Shota)
Maintenance information: 2024.3.24 Operation confirmed
Accessories: none
Main specifications: AM/FM stereo synthesizer tuner dimensions W428 x H86 x D295 mm weight 3.2 kg
A standard machine that also supports 192 kHz/24 bit digital input. With the theme of improving speaker driving power, the power transistors on the power amplifier driver stage have been made larger, and you can hear sounds with a higher driving power with a sense of stability. There are no particularly noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, power cable
Main specifications: 40W+40W (8Ω) PHONO (MM) optical digital input 2 systems coaxial digital input 1 system W440 × H105 × D370 mm 7.8 kg
Set of 4. High quality banana plugs made from machined solid brass. The terminals are machined from solid brass and finished with 24K gold plating. Since there are fixing screws at the tip and the root, the cable can be firmly fixed. The exterior has dullness on the plating part (Hiroki Aso)
Accessories: none
Main specifications: machined solid brass, 24K gold plating, 21.5g/piece
Set of 4. High quality banana plugs made from machined solid brass. The terminals are machined from solid brass and finished with 24K gold plating. Since there are fixing screws at the tip and the root, the cable can be firmly fixed. The exterior has dullness on the plating part (Hiroki Aso)
Main specifications: machined solid brass, 24K gold plating, 21.5g/piece
The price has been drastically reduced. 2024/5/10 sale price 398,000 yen one-owner item! Instantaneous power reality of up to 960W has been acquired from 120W (8Ω), which pursues drivability for all speakers, and is compatible with pure A class operation of up to 6W by setting bias current. A masterpiece that combines rich musical expression with high power. There is rust on the balance terminal, but it is good without any other noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.10 operation confirmed
Accessories: manual, power cable
Main specifications: rated output 120W+120W (8Ω) /stereo, 240W+240W (4Ω) /stereo, 480W (8Ω) /mono instantaneous maximum output/damping factor 960W+960W (1Ω) /stereo, 1920 W (2Ω) /mono time/350 input sensitivity/input impedance 1.1 V/120W (8 Ω) /unbalanced 51 kΩ, balanced 34 kΩ input/output unbalance 1 system, balance 1 System/large speaker terminal 1 system W440 x H190 x D427 mm 27.5 kg
An affordable Lax interconnect cable with attention to detail, such as each core structure that makes the hot and cold of the 1.0 m RCA cable transmission line the same, and a core wire wrapped in Japanese paper. It is characterized by its moderate thickness and good S/N. (YONEJIMA Satoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: No accessories
Maintained in 2023. After all, the warm, and glossy sound quality is excellent for stringed instruments. It has a soft and vivid sound not found in transistors, making it perfect for listening for long periods of time. In addition to noticeable scuffs and paint peeling on the exterior and transformer area, dullness and a feeling of use can be seen. Serial F0800283 (Murakoshi Yoichi)
Maintenance information: 2023.7.23 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 25W+25W) input/output waveform confirmation sound output check performed gain VOL NFB switching SW disassembly contact refinement to prevent oxidation and sulfation grease coating input/output waveform confirmation distortion load test (1 kHz (25W+25W at sine wave 8Ω load) sound output test)
Accessories: copy of instruction manual
Main specifications: 50CA10 push-pull output 30W+30W W410 x H183 x H160 mm 13.8 kg
The A3500 vacuum tube power amplifier has been refreshed by thorough maintenance down to the smallest details, such as volume disassembly and polishing. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. As for the exterior, paint deterioration and peeling can be seen on the transformer on one side, and there is a feeling of use such as dullness, small scratches, etc., and there is a dent in the hood. ※3-pole tube connection specification. 20W+20W (actual measurement) is output as specified by the manufacturer (Takasaki Atsushi)
Maintenance information: 2023.2.3 maintained (main tube (6CA7) replacement vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, complete disassembly of semi-fixed VR replacement power input gain volume, contact polishing, anti-oxidation/sulfation grease coating load test (8Ω load 1kHz 20W+20W) input/output waveform confirmation sound output check performed)
Accessories: copy of the manual
Main specifications: 20W+20W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg
The price has been reduced! 2024/4/13 sales price 5,000 yen LINN remote control. Details are unknown, but it is similar to EXOTIK and UNIDISK 1.1 remote controls. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.13 operation confirmed (infrared checked)
Accessories: none
The price has been reduced! 2024/5/15 sales price 128,000 yen LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The price has been reduced! 2024/5/15 sales price 128,000 yen LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1220444 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed.
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The price has been drastically reduced. 2024/5/14 sales price 158,000 yen The top plate has line damage, so it's cheap. Genuine Rin Japan. A famous player that brought network audio to the world at a high level. Equipped with the same functions as the KLIMAX DS, such as balanced output. The density of sound and the rich amount of information are attractive. The remote control is LINN's general-purpose type (Oikawa Tetsuji)
Maintenance information: 2024.5.14 operation confirmed (PCM/playback up to 192 kHz OK)
Accessories: power cable, universal remote control
Main specifications: support files FLAC, WAV, AIFF, AAC, MP3, WMA W381 x D360 x H80 mm 4.0 kg
The price has been reduced. 2024/2/23 sales price 35,000 yen KRK powered speaker equipped with a Class D power amplifier. The amplifier section is equipped with an equalizer to help adjust room acoustics (Sasaki Shota)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: power cable, original box
Main specifications: 2-way 145 W playback frequency band 42 Hz to 40 kHz input balance, standard jack W225 x H339 x D284 mm 7.6 kg
A new concept connecting tap equipped with a surge absorber (lightning protection) and noise filter in one package. It has contributed greatly to further improvements in S/N and sharp sound quality that is transparent yet makes you feel dynamic. There are no noticeable scratches on the exterior. Serial 38600KK042 (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: W56 x H35 x D233 mm (including connected outlets) 620 g
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product. There is dirt on the exterior (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
It is a headphone amplifier with separate power supply with a preamp function. Genuine Naspec. It is compatible with most commercially available headphones, and high sound quality playback is possible even with inner-earphones or authentic stereo headphones. There are small scratches and dullness on the exterior. Serial KRHQ1200069/KRHQP120069 (Yonejima Satoshi)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: power cord, connection cord
Main Specifications: Dynamic Range 110dB SNR 115dB Output Impedance 8Ω Body: W185 x D175 x 53mm 1.0 kg Power Supply Unit: H185 x D150 x H53 mm 1.7 kg
※Operation has been confirmed, but since it is cheap, it will be handed over as is. This is a KENWOOD KA series amplifier. It has a compact and clean design, and can be placed horizontally or vertically. The sound quality is as clean as it looks, and it is recommended for those who want to enjoy music in a small space. Serial 61100061 (Sato Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 3 input lines 12W+12W (8Ω) dimensions W171 x H67 x D207 mm weight 2 kg
Since the condition is poor, such as cracks in the body, it is currently being sold. A small full-range speaker that is compact, can be placed freely, and has a gentle impression. The sound quality is soft and the sound is relaxed. You can see a feeling of use such as cracks, dullness, and abrasions on the exterior and body (Kobayashi Hitoshi)
Maintenance Information:2023.6.5 Operation confirmed
Accessories: none
Main specifications: full range compact speaker 8ohm maximum input 40W W230 x H150 x D163 mm 1.6 kg
The price has been reduced. 2024/4/24 sales price 69,800 yen ※Since the digital input circuit module cannot be repaired, the digital input cannot be used. Maintained! Kenwood pre-main amplifier. It plays clear, transparent mid-high frequencies and low frequencies with a firm sense of power typical of Kenwood in a well-balanced manner. There is an air cap mark on the top of the front panel. (KOBAYASHI Hitoshi)
Maintenance information: 2024.4.24 Maintained (input board connector correction, switch correction, contact correction, operation confirmation) 2023.5.21 Maintained (display lamp replacement. Switch and volume contact correction. (*The digital circuit module is broken, but the digital input cannot be used because it is not available)
Accessories: none
Main specifications: 150W+150W (8Ω) phonomC/mm mounted damping factor 1000 W 476 x H170 x D424 mm 19.7 kg
The price has been reduced. 2024/4/26 sales price 12,800 yen. This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
There is no problem with operation, but since it is cheap, it will be handed over as is. The cleanness of the mid to high range sound is attractive. The speaker has a strong design, so it goes well with the interior of the room. In addition to dullness and small scratches on the exterior, there are gaps in the veneer seal. Serial 3276746G 3276747G (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net jumper cable
Main specifications: 2-way bass reflex playback frequency band 50 to 40,000 Hz maximum input 100 W efficiency 88 dB impedance 8 ohms W175 x H301 x D261 mm 4.5 kg
The price has been reduced! 2024/3/22 sales price 200 yen ※PSE standard product! This is a standard type of wall outlet. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.3.22 continuity confirmed
Accessories: none
Sony VL-37G compatible replacement needle Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
*Genuine Oba Shoji product. Although it is a low-end model, the integrated chassis made from a newly selected 6061 aircraft-grade hard aluminum block has an excellent design. The view is good, and the expression of silence gives a sense of comfort. There is a scratch on the front of the exterior. Serial SD1019 (Yonejima Satoshi)
Maintenance information: 2024.5.12 Operation confirmed.
Accessories: instruction manual, power cord
Main Specifications: Continuous Effective Output: 100W x 2 (8Ω) Frequency Band: 5Hz-65kHz, 3dB Dynamic Range: 110dBA Damping Factor: 1000 @1kHz8Ω Gain: 26dB Input Impedance: 40kΩ Input: Balanced (XLR) 1 System Output: 1 System (using CARDAS binding posts) Dimensions: W348 x H75 x D186 (mm) Weight 3.4 kg
The uncompromising construction is excellent, with an aircraft-grade machined aluminum block chassis. I am amazed at its compactness and beauty. I'm only particular about the expressive power of the silent part, and the way the faint sound disappears is as clear as if you take your breath away. It's true that it makes me lament the warmth of human skin. Serial SE0950 (Fujisawa Yukishi)
Maintenance information: 2024.5.12 operation confirmed
Accessories: remote control, instruction manual, power cord
Main Specifications: Input Terminal Unbalance (RCA) 2 Systems/Balance (XLR) 2 Systems/Bypass, Unbalanced (RCA) 1 System Output Terminal Unbalance (RCA) 1 System/Balance (XLR) 1 System Input Impedance/Unbalance 48kΩ/Balance 48kΩ Dimensions W348 x H75 x D191 mm (maximum dimensions) Weight 4.2 kg
The price has been reduced. 2024/4/29 sales price 110,000 yen The 3 channel 5 units are nicely put together in one package. In addition to the fact that a rich sound field can be simply played back via Bluetooth, etc., it is a product with an emphasis on functionality that can also be enjoyed with analog. Recommended for studio users. Other than the exterior and stains on the top plate, it's fine (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: remote control, power cord
Main specifications: 33mm pure pulp cone woofer x 2, 25mm aluminum dome tweeter x 2, 100mm pure pulp cone center midrange x 1 input HDMI (ARC), 3.5mmAUX, RCA Phono (MM), Ethernet/WiFi Bluetooth playback frequency characteristics 45Hz to 25kHz (-6dB) W790 x H216 x D287mm 15.9 kg
The price has been drastically reduced. 2024/2/12 sales price 89,800 yen ※It has been replaced with a non-genuine edge. You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are viscoid sagging marks (Oikawa Tetsuji)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
※Inexpensive because there are scratches and paint peeling. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
The price has been drastically reduced! 2024/4/27 sales price 39,800 yen Center speaker using the same unit as the LS60. The luxurious 3-way specification helps build a theater system. On the exterior, there is a feeling of use, such as small scratches scattered on the top plate. There are small scratches on the exterior. Serial FY00030004240 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: spike, spike base
Main specifications: 16.5cm double woofer 3-way 4-speaker impedance 6Ω playback frequency band 50-40kHz allowable input 150W dimensions W672 x H217 x D235 mm weight 14.4 kg
It is a model that has completely renewed all units in the JBL 4312 series control monitor, which has continued for over 30 years. In addition to the vibrant sound with a high sense of freshness, which is characteristic of the series, the expansion of the high frequency range is remarkable. The exterior has a feeling of use such as dullness. Serial 0261 0440 (Tomonori Asae)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: 3-way bookshelf type frequency characteristics 40 Hz to 40 kHz crossover 2 kHz 5 kHz 6 Ω output sound pressure level 93 dB W362 x H597 x D301 mm 18.1 kg
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2022/5/18 sales price 2,000 yen When used between an S-terminal AV noise filter device and a display, unnecessary noise is removed without deteriorating the amount of information or high frequency characteristics of the video signal at all, and the video signal is organized. The exterior is dull and dirty, and there are floating marks on the label. (TAMURA Eiji)
Maintenance Information: 2022.5.18 Continuity Confirmed
Accessories: There are no accessories
A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
The price has been reduced. 2024/5/4 sales price 128,000 yen*Inexpensive because Saran Net is out of stock. Infiniti's best-selling speaker. It's a 3-way system that brings out quite a bit of volume for a tall boy type. The bass is also sufficiently reproducible with a sense of scale coming out of the double woofer, and even pipe organs can be reproduced with plenty of room. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.6.7 operation confirmed
Accessories: copy of instruction manual, jumper, spike
Main specifications: 3-way system frequency characteristics 35 to 450,000 Hz crossover 250/3,500 Hz 6 ohms W390 × H1200 × D380 mm 40 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: power cable
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
Sound can be produced, but there is uneven rotation and sound shake, so it will be sold as it is. The sound box is HMV No.4. The volume is not large, but you can hear an elegant tone in the high range with fine grain. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka)
Maintenance information: 2021.11.28 Operation confirmed
Accessories: handle
Main specifications: W290 × H150 × D425mm 7.0kg (actual measurement)
Genuine Hitachi, genuine replacement needle for IFS-240 The cantilever is slightly turned to the left. Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Roadie's representative 2-way speaker system. A luxurious magnetic circuit was added, and a machined aluminum horn tweeter of unusual quality for this size was used. Along with its elegant look, you can easily enjoy the thick domestic vintage sound. There are small scratches, stains, and warps on the top surface and side angles (Murakoshi Yoichi)
Maintenance information: 2024.2.17 sound output confirmed
Accessories: saran net
Main specifications: 2 way, 2 speakers, dumped bass reflex system, bookshelf type impedance, 8 ohms, output, sound pressure level, 88 dB, dimensions W360 x H610 x D340 mm, weight 22 kg
Genuine Hitachi, genuine replacement needle for IFS-240 Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Sound can be produced, but there is uneven rotation and sound cracking, so it will be sold as it is. The volume is not loud, but it has a soft tone that creates a nostalgic atmosphere. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka)
Maintenance information: 2021.11.27 Operation confirmed
Accessories: handle, paper horn
Main specifications: W278 × H78 × D300mm 3.7kg (actual measurement)
Power cable 1.8 m PSE standard 5-core power cable using PCUHD and 4N-OFC. The plug is a 2P type that uses brass+rhodium plating. Thick, orthodox sound. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories