Torrens entry model. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for entry-level belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
Maintained by the manufacturer. The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There are abrasions on the exterior and volume, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (1 PSW rework, 12V relay, function SW replacement. (Amplifier board inspection, solder correction, operation confirmation test)
Accessories: instruction manual, power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible W434 x H180 x D478 mm 22 kg
Maintained! 15th anniversary model of the 607 series. MOS-FET is used for the power stage, adding a sense of transparency to its characteristic heat, and is compatible with various music genres. It has a configuration that exceeds its class, such as balanced input support, and it is a powerful machine that is still popular today. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 maintenance completed (tone and other switches dismantled and polished, coated with grease (loudness, muting, processor, subsonic, input selector, power amplifier direct, source direct switch), output relay replacement, protector part capacitor replacement, solder repair, internal inspection and cleaning, bottom repair, operation confirmation)
Accessories: power cable, copy of manual
Main specifications: 45W+45W (8Ω) PHONO (MM/MC) W460 × H159 × D446mm 18.8 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
A power supply with approximately 2.5 times the capacity of the power supply built into the GT player. In addition to improving rotation stability, the phono motor's bidirectional servos are used as electronic brakes, and heavyweight turntables stop quickly. There are dents on the exterior, dents on the top plate, rust on the output terminals, dullness throughout, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: Applicable models GT-2000/L/X W135 x H93 x D365 mm, weight 5 kg
*Currently sold. A small Yamaha speaker with a piano finish. Rich bass reproduction is achieved by deepening the depth while being small. Deep low frequencies are added to the sharp, stretchy mid-high range unique to Yamaha, so you can enjoy sound that's more than the price. There are scuffs and dents on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: saran net
Main specifications: output sound pressure level 85dB impedance 6Ω allowable input 40W playback frequency band 55Hz to 80kHz W154 x H274 x D287 mm weight 3.9 kg
※1 bottle only. By adopting a diaphragm with a weight of 0.03 g or less and a magnetic circuit with a strong magnet that makes use of the characteristics of the 1000m tweeter berylum material, we have achieved smooth frequency characteristics and excellent start-up even at the high end. The sharp, realistic sound quality is a fresh and transparent sound. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: size W115 x H45 x D115 mm 0.9 kg (actual measurement)
The price has been drastically reduced! 2024/4/26 sales price 178,000 yen Maintained by TEAC! VRDS-25 rigid menism final model. This is a popular model used by JAZZ/ROCK fans with a strong housing and a highly accurate VRDS mechanism, and has high resolution and clear contours. Spikes are attached to the solid 8 mm thick bottom plate, and the excellent construction with an excellent sense of reliability is also attractive. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.26 Maintained (All parts have been inspected. We have confirmed wear on the tray belt, clamp belt, and turntable bearings. Tray belt, clamp belt, and turntable bearing replacement. (Check operation by cleaning and lubricating the pickup and mechanical parts)
Accessories: Remote control instruction manual copy
Main specifications: multi-bit DAC, 25 bits, 8 times oversampling digital filter, W442 x H145 x D344 mm, weight 23 kg
The price has been drastically reduced. 2024/5/12 sales price 238,000 yen Accuphase power conditioner. PS-500 upgraded model. The sense of transparency increases, and the way stillness and motion are drawn is more delicate. It is recommended for those who are thinking about upgrading the power supply area. There are dents and stroke marks on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, power cable
Main specifications: rated output capacity 510V (continuous) rated output voltage AC100V±2V rated output current 5.1A output frequency 50/60 Hz (synchronized with input frequency) instantaneous current supply capacity 70A input voltage range AC90 to 110V power consumption at no load 55 W 475 W x 180 H x 394 Dmm 23.8 kg
ADK 4-tier rack. Of course, other rack units can be stacked and used. Depending on the size of the device, you can change the rack to your liking. There is a feeling of use due to appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: 4 hole caps
Main specifications: upper stage and middle height 170 mm, lower stage height 250 mm W574 x H730 x D497 mm
The price has been reduced! 2023/5/9 sales price 17,000 yen set of 4. A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
The price has been reduced! 2023/5/9 sales price 17,000 yen set of 4. A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
The price has been reduced. 2024/4/10 sales price 26,800 yen ※6 month warranty triode MM/MC compatible phono equalizer. You can easily enjoy records even with an amplifier that does not have a PHONO input. It's slightly dull (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: instruction manual, power cable
Main specifications: semiconductor circuit input impedance mm47kΩ/mc2Ω to 47Ω compatible gain mm36dB/mc55dB W90 x H100 x D230 mm 1.6 kg
Since it is cheap, it will be sold as is. SANSUI left and right independent 10-band equalizer. It is an equalizer that has a high amount of change and can drastically improve sound quality. The red LED for the slide volume is also nice, but above all, if you like the spectrum analyzer in the center, pay attention. The spare aner can switch back and forth between the 3 patterns of Lch, Rch, and both. The intuitive operation makes it easy to create sound quality, and it is a car that can also be enjoyed visually. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: center frequency 32 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz variable range ± 12 dB W430 × H112 × D223 mm weight 3.1 kg
An item that improves sound quality simply by placing it on the floor between the speakers! The development period is 30 years, so it's worth trying out. For those who are worried about not being able to tune the way they want with just sound-absorbing materials or reflective materials, please go for it. As far as I've tried it at the store, I have the impression that the high range is slightly milder and the middle range is thicker. There are scuffs on the exterior and bottom, but others are good with little feeling of use (Kobayashi Hitoshi)
Accessories: special aluminum case, special cleaner liquid, cloth, instruction manual
Main specifications: diameter 80mm height 58mm 1.1 kg
The price has been reduced! 2024/5/11 sales price 79,800 yen A player equipped with a DAC chip Wolfoson WM8740 with 192 kHz/24 bit resolution, and has strong expressive power and tends to sound straight. The exterior has a feeling of use such as dullness. Serial 704-3341068 (Tomonori Asaine)
Maintenance information: 2024.5.11 operation confirmed
Accessories: remote control power cord
Main specifications: W431 x H104 x D320 mm 7.4 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
FOSTEX aluminum horn tweeter A horn tweeter with an Alnico magnet, horn type, and attractive specs with high efficiency. It is sharp and has excellent penetrating power. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: none
Main specifications: Hard aluminum alloy diaphragm, Alnico magnet, frequency characteristics, 5kHz to 35kHz, impedance 8Ω, output sound pressure level, 106 dB, recommended crossover, 7 kHz, baffle opening dimensions: 61 mm, weight: 720g
The price has been drastically reduced. 2024/5/10 sales price 468,000 yen Maintained! By installing a double 10-inch (25cm) diameter woofer while equipped with a traditional JBL horn and compression driver, a slim tall boy style is achieved with sufficient low frequency energy. It is an excellent speaker that combines low frequencies with instantaneous power typical of JBL and sharp mid-high frequencies. The exterior is good with no noticeable scratches (Shota Sasaki)
Maintenance information: 2024.5.10 Maintained (magnetic fluid removal/cleaning/center adjustment in the single-sided driver magnetic circuit gap)
Accessories: none
Main specifications: 3-way 4-speaker woofer 100FE-12 scoker 175Nd-3 tweeter 139 Nd playback frequency band 33 Hz to 40 kHz crossover frequency 850 Hz/12 kHz impedance 6 Ω output sound pressure level 92 dB allowable input 250W (RMS) W370 x H1,007 x D368 mm 39 kg
The price has been drastically reduced! 2024/5/11 sales price 128,000 yen Maintained! Late QUAD44 with CD input terminal. It's not flashy, but the thick, glossy tone is attractive. In particular, it softens female vocals. Serial Q36114 (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (internal power supply switch contact dirt contact polishing treatment, balance VOL cleaning ~ check OK. Check the other boards and re-solder the holes. C, R check OK)
2024.5.9 Internal power supply switch contact polishing treatment
Accessories: power cord
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
The disposal price has been reduced (member prices are not applicable) 2023/5/9 sales price 35,000 yen with casters. Hayami's 5-tier vertical audio rack shelf can be changed to a 16mm pitch. The 4-way open structure also has excellent heat dissipation. Sound countermeasures are also good with heavy weight MDF+particle board. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Main specifications: 4 shelves, load: top plate/bottom plate 150 kg, adjustable shelf 50 kg W604H992 x D580 mm (height 1060 mm including casters), weight 58 kg
The price has been reduced! 2024/4/27 sales price 8,000 yen Hamilex speaker stand. Not only is the small speaker, but it also has a sturdy construction with a load capacity of 50 kg. There is a feeling of use on the exterior due to small scratches etc. (Tomoho Asae)
Accessories: none
Main specifications: load capacity approx. 50 kg, top plate W200 x D240 mm, overall W240 x H450 x D300 mm, weight 4 kg/1 unit
The price has been reduced. 2024/5/12 sales price 398,000 yen A popular model equipped with a diamond tweeter that rewrote the history of the 800 series. The color is rose. The excellent stretch that penetrates the high range without habit and the sense of volume in the mid to low range, which has a strong presence, are appealing not found in the current D3. The bass reflex port is sticky and there is rubbing on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, original box, jumper cable, cloth
Main specifications: 2 way 2 speakers bass reflex diamond dome tweeter 8 ohm crossover 4 kHz frequency characteristics 42 to 33 kHz W238 x H418 x D351 mm 12 kg
The price has been reduced. 2024/5/9 sales price 49,800 yen Woofer edge softening treatment! A classic model that uses carbon graphite on woofer cone paper. The high and middle ranges have a core yet are glossy, and the low frequencies are tight. It is a well-balanced speaker and is suitable for a wide range of genres. In particular, the vocals in combination with a vacuum tube amplifier are excellent. You can enjoy the enchanting diatone sound. As for the exterior, the frame has rust, scuffs, dullness, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.7 maintenance (exterior cleaning, edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed impedance 6 ohms, W380 x H680 x D325 mm, 21 kg
The price has been reduced. 2024/5/10 sales price 99,800 yen Maintained. professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. There is a feeling of use such as a scuff on the top plate. Serial Q002959 (Mizushima Itsuro)
Maintenance information: 2024.2.15 maintenance (internal Tr, C, R check, output phase correction resistor, DC IN± bypass C, gain setting C, CDS replacement within the INPUT photocoupler. INPUT VOL CLEANING Output cable XLR cannon attached)
Accessories: copy of instruction manual, power cable, speaker cable
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
Audio-Technica universal tone arm for broadcast stations. The lead wire inside the arm uses silver wire with a Teflon coating. This is such a masterpiece arm that was later reprinted for a limited time. The exterior is slightly dull, but it is good for the model year (Murakoshi Yoichi)
Maintenance information: 2024.5.13 operation confirmed 2024.2.27 operation confirmed, IFC weight thread replacement
Accessories: copy of instruction manual, connection cord, armrest, hex wrench
Main specifications: static balance type, execution length 257 mm, compatible cartridge, 13.5 to 33 g (including shell), needle pressure range 0 to 3 g
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
※Chips and oxidation are conspicuous in the horn part, so it is inexpensive. A tweeter representing JBL. It gives an expression with a greater sense of depth and breadth than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. The exterior has dullness, rust, and scratches due to aging. Serial 33996/33998 (Yonejima Satoshi)
Maintenance information: 2024.5.13 good oscillator test
Accessories: No accessories
Main specifications: horn type ferrite magnet playback frequency band 2,500 to 15,000 Hz impedance 8 ohms output sound pressure level 110 dB diameter 119 x depth 94 mm weight 2.4 kg
I checked Blu-ray, DVD, and CD playback with a simple check. Since it is cheap, it will be sold as is. A high-end Blu-ray disc player from 2008. Equipped with a high image quality circuit CREAS with 14 bit processing. You can enjoy SONY-like sound quality that is clear and has good cuts (Murakoshi Yoichi)
Maintenance information: 2024.5.10 simple sound output, video output confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: compatible media · BD/DVD-R/-RW/+RW/+R card slot no LAN terminal · no DV terminal · D terminal x 1 · optical D audio x 1 · HDMI terminal x 1, no 3D video compatible W430 x H125 x D365 mm 10 kg
Currently sold. The BEHRINGER DEQ2496 is a digital processor ideal for people who want to make quick and easy settings, since most of the equipment required for a PA system is completed with this one unit. It is a convenient item equipped not only with an equalizer and compressor/limiter, but also with functions that automatically remove frequency correction and feedback (Murakoshi Yoichi)
Maintenance information: 2024.5.9 sound output confirmed (details unchecked)
Accessories: instruction manual, power cord, original box
Main specifications: W480 x H42 x D210 mm 2 kg
Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. Small scratches are scattered on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK)
Accessories: instruction manual (copy)
Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
Maintained! A power amplifier using the AB/LR independent power supply system, which is a further development of the A class B class 2 independent power supply system. Contrary to its solid appearance, it has a beautiful sound with a sense of transparency. The sound quality is moderately tight and firm, and it naturally handles crisp and energetic intonation expressions. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.12 Maintained (replacement of defective output relay contacts. (Replace deteriorated capacitors in power supply circuits and other circuits)
Accessories: none
Main specifications: 100W+100W (8Ω) compatible speakers 4Ω to 16Ω SNR 110dB W420 x H166.5 x D300 mm 19.2 kg
Comes with original box and is in excellent condition! Limited production of 2000 pieces, DL-103 special model. High-grade specifications that use pure gold for the coil and use a special resin containing carbon for the body. Compared to the normal 103, the thick, thick sound from bass to medium is attractive. Not only for collection purposes, this cartridge is worth listening to (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box
Main specifications: Generator coil, pure gold wire body, carbon fiber reinforced case, MC type, output voltage 0.25mV, proper needle pressure, 2.2 g to 2.8 g, dead weight 9.3 g
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
Mono exclusive MC cartridge. It's not flashy, but it stretches and makes a gentle sound that is pleasant. There is a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.5 mV needle pressure 2.5 to 4.5 g dead weight 5 g
A horn type tweeter that is an improved model of the JA-0506. Alnico magnets are used for the magnetic circuit, and hollow-out aluminum is used for the horn part. A hard duralumin V-shaped ring diaphragm is used for the diaphragm. The sound is bright and clear (Daiki Goto)
Maintenance information: 2024.5.13 (operation confirmed)
Accessories: original box
Main specifications: horn type tweeter unit Alnico magnet 0.23 kg impedance 8 ohms playback frequency band 3 kHz to 20 kHz recommended usage band 5 kHz or more rated input 1 W maximum input 2 W sound pressure level 109 dB
Good level! A record player system with Ikeda's long-arm IT-407 attached to the SX-1500 superlative armless model with air floating+vacuum. The heavyweight turntable rotates while levitating 0.03 mm with the same floating structure as the SX-8000 /2. The vacuum function also works well. There is no mechanical noise, and the precision, which can be said to be the finished form of an analog player, is attractive (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: strobe, instruction manual, EP adapter, thread, platter handle, arm original box, 2 shaft fixing columns, hex wrench
Main specifications: IT-407: total length 388 mm effective length 307 mm mounting hole diameter 31 mm cartridge shell balance range 6 g to 38.5 g arm base: AX-6G SX-1500FVG: 33, 45 rotation base frame RB-1500 · W330 x H85 x D330 mm motor unit RY-1500D · W180 x H130 x D315 mm air pump RP-1110 · W200 x H210 x D350 mm Total weight 44.7 kg
The price has been reduced! 2024/5/10 sales price 398,000 yen Maintained! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the sound appeal of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. As for the exterior, there is some rust on the top plate. Serial JMC1488 (Fujisawa Yukishi)
Maintenance information: 2024.5.10 Maintained (VR part gearbox with motor disassembly, cleaning grease replacement. Meter and panel lamp, grommets, and tact SW replacement. Screw replacement. Cleaning volume, loudness, etc. Solder correction. Bias and offset checks. Output audio check. Remote control operation check)
Accessories: remote control, copy of instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
The disposal price has been reduced! Member prices are not applicable. 2024/5/10 sales price 148,000 yen Maintained by Yamaha Service! Yamaha's separate AV power amplifier. It is an authentic AV amplifier that is very careful about the detailed mid-high range, and the thickness and sound quality of the mid and low frequencies. There are scratches on the exterior. Serial Y027223VX (Fujisawa Yukishi)
Maintenance information: 2024.5.10 manufacturer maintained (output relay replaced. Input sheet (input pin jack, balance/unbalance changeover switch, circuit board), CPU sheet (cannon input connector, balance/unbalance changeover switch, circuit board) deterioration replacement, operation check, sound output test)
Accessories: instruction manual, power cord, original box
Main specifications: 75W W435 x H210 x D463.5 mm 25.4 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! An original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine)
Accessories: MA15 woofer grill net
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
The disposal price has been reduced (member prices are not applicable) 2023/5/9 sales price 19,800 yen It is cheap because it is in poor condition! *Currently sold. A horn-shaped tweeter that is familiar to the ear. The appeal is that it's easy to read, but it doesn't hit your ears, so you won't get tired of listening. On the exterior, in addition to a feeling of use such as dullness and small scratches, some terminals are damaged (Asaine Tomoho)
Maintenance information: 2024.5.9 operation confirmed
Accessories: none
Main specifications: horn type tweeter frequency characteristics 2.5 kHz to 22 kHz 8 ohms cutoff frequency 2.3 kHz recommended crossover 3.5 kHz efficiency 105 dB W83 x H83 x D94 mm 1.1 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
A typical woofer attached to first-class products such as the Exclusive2402 and Westlake Audio. It is a highly stable model that can withstand professional use. The response speed is fast and the sound that makes it stand up well is attractive. The exterior has dullness and small scratches. Serial OA8600/OC8677 (Yonejima Satoshi)
Maintenance information: 2024.5.8 sweep test good
Accessories: instruction manual
Main specifications: 40cm cone woofer frequency characteristics 28 Hz to 1000 Hz 8 ohms (measured 7.9 ohms) output sound pressure level 97 dB dimensions diameter 400 mm x depth 167 mm 11 kg/1 unit
The 2.4 m pair terminal uses high-purity OFC (oxygen-free copper), which has little electrical resistance, as the unprocessed core wire, and the stranded part is impregnated with a gold colloid liquid with ultra-fine gold particles of 3.5 to 8 nanometers dispersed in high purity, and the sound quality is well-balanced. (FUJISAWA KOSHI)
Maintenance information: 2024.5.7 continuity confirmed
Accessories: No accessories
The A3500 vacuum tube power amplifier has been refreshed by thorough maintenance down to the smallest details, such as volume disassembly and polishing. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. As for the exterior, paint deterioration and peeling can be seen on the transformer on one side, and there is a feeling of use such as dullness, small scratches, etc., and there is a dent in the hood. ※3-pole tube connection specification. 20W+20W (actual measurement) is output as specified by the manufacturer (Takasaki Atsushi)
Maintenance information: 2023.2.3 maintained (main tube (6CA7) replacement vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, complete disassembly of semi-fixed VR replacement power input gain volume, contact polishing, anti-oxidation/sulfation grease coating load test (8Ω load 1kHz 20W+20W) input/output waveform confirmation sound output check performed)
Accessories: copy of the manual
Main specifications: 20W+20W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg
Maintained by the manufacturer! A system in which Denon's DP-5000F phono motor and SAEC tonearm WE-308, which is highly regarded for its high accuracy, are mounted on the cabinet Lead-console Type2. The DP-5000F is a high-performance phono motor that inherits the elegant and unique design of the previous model DP-5000 and has the same performance as a commercial device, and also adds ease of use and reliability. The WE-308 uses hard rubies for double knife-edge bearings, and is characterized by crisp, clear sound and accurate sound image localization. Furthermore, heavyweight cartridges can also be used with self-made subweights by the previous owner (Oikawa Tetsuji)
Maintenance information: 2024.5.12 Denon maintained (30 defective transistors replaced, speed adjusted)
Accessories: Heavyweight
Main specifications: DP-5000F: servo type direct drive WE-308: double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g W510 x H210 x D456 mm (actual measurement)
The first stereo power amplifier with audio design to arrive. I immediately played it at the storefront, and it expressed a very clear and realistic sound image. In particular, mid-high range vocals and pianos are vivid and powerful amplifiers. There is a small line scratch on the top plate on the exterior (Sasaki Shota)
Maintenance information: 2024.5.12 operation confirmed
Accessories: manual, power cable
Main specifications: 100W+100W (RCA, 8Ω) 270W+270W (XLR, 8Ω) W260 × H290 × D360 mm 18 kg