Add search
170 results
Manufacture | Model/Title | Price | Arrival date

PhonomoduleGermany

Ask 24-42327-06199-00
Phonomodule
Manufacture:OCTAVE
Original price: JPY 1,415,000
Price: JPY 425,455
Germany 2010 made
Arrival: 2024-04-27 20:11:00
description
※It has a cigarette smell, so it's cheap. Maintained! Modular phono equalizer for vacuum tube circuits. The Phono Module, a phono preamp with MC input using a head amplifier instead of a transformer, combines both a vacuum tube and a solid state device, so you can hear a very fine, supple, and stable sound. The exterior has scratches on the volume and top plate. Serial 3105993 (Yonejima Satoshi) Maintenance information: 2024.4.27 Maintained (power supply part rubber foot mounting vacuum tube pin cleaning volume cleaning connector part screw tightened. Audio check for each input/output ※It takes about 2 minutes for the sound to come out after the power is turned on → warm-up is complete. Also, when switching functions, a mute operation of about 15 seconds intervenes. Note: The XLR output is a variable output, so the volume is effective, but the RCA output is fixed. (not via volume) Accessories: power cable Main specifications: Vacuum tube used ECC83 x 1, ECC81 x 1, ECC88 x 1 Phono (MM, MC) LINE main body W437 x H80 x D390 mm weight 7.62 kg power supply unit W100 x H77 x D230 mm weight 4 kg

LEGGIEROJapan

Ask 24-42330-06235-00
LEGGIERO
Manufacture:FIDELIX
Original price: JPY 185,000
Price: JPY 161,818
Japan 2014 made
Arrival: 2024-04-27 20:10:58
description
A rare item. Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. (FUJISAWA KOSHI) Maintenance information: 2024.4.27 Inspection operation has been confirmed (during MC input, when the input is opened in high impedance mode, it is transmitted and lumpy noise is emitted (this is a specification). When the dips SW ② and ⑤ on the bottom plate are placed on the rear side, normal impedance mode becomes normal impedance mode and no noise is emitted. There is no sound during MM input → sound is made by turning off DIP SW ① and ② turned ON in MC input mode (on the rear panel side). (MC input setting for current 330 ohm load) Operation was tested with each function for internal inspection of the main unit and power supply unit.) Accessories: power supply unit Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg

AX-501-SPJapan

Ask 24-42332-06256-00
AX-501-SP
Manufacture:TEAC
Price: JPY 40,909
Japan 2015 made
Arrival: 2024-04-27 20:10:49
description
※It has a cigarette smell, so it's cheap. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. The exterior has dullness, scratches, etc. Serial 0020331 (Yonejima Satoshi) Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)). (In addition to the above, each part is cleaned, inspected, and adjusted) Accessories: remote control, power cable Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg

AX-501-SPJapan

Ask 24-42332-06605-00
AX-501-SP
Manufacture:TEAC
Price: JPY 36,182
Japan 2015 made
Arrival: 2024-04-27 20:10:48
description
※It's cheap because of the smell of tobacco and the remote control being out of stock. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. There are scratches and scratches on the exterior. Serial 0020331 (Yonejima Satoshi) Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)) has been performed. (In addition to the above, each part is cleaned, inspected, and adjusted) Accessories: power cable Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg

LS CENTERU.S.A

Ask 24-42632-08673-00
LS CENTER
Manufacture:JBL
Original price: JPY 140,000
Price: JPY 36,182
U.S.A 2006 made
Arrival: 2024-04-27 20:10:44
description
Center speaker using the same unit as the LS60. The luxurious 3-way specification plays a part in building a theater system. On the exterior, there is a feeling of use, such as small scratches scattered on the top plate. There are small scratches on the exterior. Serial FY00030004240 (Fujisawa Yukishi) Maintenance information: 2024.4.27 Operation confirmed Accessories: spike, spike base Main specifications: 16.5cm double woofer 3-way 4-speaker impedance 6Ω playback frequency band 50-40kHz allowable input 150W dimensions W672 x H217 x D235 mm weight 14.4 kg

SD-3.5Japan

Ask 24-42548-08012-00
SD-3.5
Manufacture:KRIPTON
Original price: JPY 67,000
Price: JPY 27,091(pair)
Japan
Arrival: 2024-04-27 20:10:40
description
Krypton speaker stand It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji) Accessories: instruction manual Main specifications: W249 x H620 x D325 mm Weight 7.2 kg/unit

RSC VECTOR2-8N/1.0mU.S.A

Ask 24-42533-07852-00
RSC VECTOR2-8N/1.0m
Manufacture:TARALABS
Original price: JPY 63,000
Price: JPY 13,636(pair)
U.S.A
Arrival: 2024-04-27 20:10:32
description
A unique structure in which ribbon-shaped conductors using 1.0m pair collet chucks for RCA cables are arranged spirally on the outside of SVPE insulation. As a result, there is no extra cushioning on the positive side and negative side. The resolution is high and the low-frequency expression is excellent. (FUJISAWA KOSHI) Maintenance information: 2024.4.27 continuity confirmed Accessories: No accessories

6NAC-3000 Meister/1.0mJapan

Ask 24-42533-07853-00
6NAC-3000 Meister/1.0m
Manufacture:Zonotone
Original price: JPY 16,900
Price: JPY 6,364(pair)
Japan
Arrival: 2024-04-27 20:10:29
description
RCA cable 1.0 m pair 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. (FUJISAWA KOSHI) Maintenance information: 2024.4.27 continuity confirmed Accessories: No accessories

US-1x2Japan

Ask 24-42334-06273-00
US-1x2
Manufacture:TASCAM
Price: JPY 5,455
Japan 2017 made
Arrival: 2024-04-27 20:10:16
description
※Because it smells like tobacco, it's cheap. 2IN/2OUT USB audio interface in the most compact body in the series. In addition to simultaneous microphone and guitar input, it is also compatible with audio applications with RCA line input/output. Serial 1890186 (Fujisawa Yukishi) Maintenance information: 2024.4.27 simple operation confirmed Accessories: AC adapter Main specifications: power consumption 2.5 W 146 x H55 x D120 mm 623 g

BT-2U.S.A

Ask 24-41975-03439-00
BT-2
Manufacture:AUDIO OF OREGON
Original price: JPY 178,000
Price: JPY 72,545
U.S.A 1978 made
Arrival: 2024-04-27 20:09:58
description
Maintained! This is the first AUDIO OF OREGON control amplifier to be in stock in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji) Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check) Accessories: No accessories Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg 
170 results
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out