*Currently sold. Quad condenser speakers It is a revolutionary speaker that embodies founder Peter Walker's idea that a diaphragm should be as light as air. The left and right low range elements come out of the mid and low frequencies with more volume than expected. The high range comes out of the high frequency element in the middle, but it's slightly modest (Mizusaki Ryo)
Maintenance information: 2024.4.30 Operation confirmed
Accessories: power cord, power strip
Main specifications: frequency characteristics 45 Hz to 18,000 Hz total harmonic distortion 100 Hz · 0.5%, 1 kHz · 0.4%, 6.3 kHz · 0.4% impedance 100 Hz · 28 Ω, 1 kHz · 12 Ω, 6.3 kHz · 10 Ω horizontal orientation characteristic 70 degrees vertical orientation characteristic 15 degrees W880 × D265 × H790 mm 18 kg
Maintenance has been completed, including removal of internal glass fogging! The company's first model equipped with a digital panel. The sense of S/N has increased, and the sound is deep enough to be compatible with modern speakers. The high range has also been widened, and while every band remains clear, it makes you feel the thickness typical of McKinn. Detailed settings are also possible with the 8-band equalizer. (MIZUSAKI Ryo)
Maintenance Information: 2024.4.30 Maintained (glass panel fogging cleaning. 8 Tone VR ✕ pieces have been disassembled and cleaned.
Operation check OK)
Accessories: power cord, remote control, instruction manual
Main specifications: digital volume type 8-band equalizer line input 9 systems (RCA x 8/XLR x 1) phono (MM) input 1 system line output 3 systems (XLR/RCA) W445 x H150 x D470 mm 11.5 kg
This is a super dreadnought mono power amplifier. Recommended for those who want to drive large speakers! The sound quality is natural and clearly expresses delicate parts. It is a power amplifier that has driving power and allows you to feel comfortable and at ease. There are small scratches on the exterior, but it is generally good (Ryo Mizusaki)
Maintenance information: 2024.4.30 Maintained (meter acrylic removed, internal glass fog cleaning, all front lamps replaced. (Check that the lamp is on)
Accessories: power cord, instruction manual
Main specifications: 1200W (2/4/8 Ω) speaker output 1 system x 3 (2 ohm x 1, 4 ohm x 1, 8 ohm x 1) input terminal RCA x 1 system, XLR x 1 system, W445 x H313 x D540 mm 66.7 kg/unit
Output transformer sale push-pull output 15 W primary: 8 kΩ secondary: 4/8/16 Ω W97 x H80 x D86 mm approx. 1.9 kg/piece (actual measurement, not including protrusions) There is a dull item with the original box, but it seems to be an unused item due to the condition of the terminals!
Accessories: original box
Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
Jumper cable, 0.2m, set of 4, silver conductor (PSS), banana-Y lug terminal specification, there is dullness around the plug (Kojima Yosuke)
Accessories: none
ALTEC monitor speaker system. The unit configuration is similar to CARMEL. The mid-low range, which has a sense of volume like CARMEL, is slightly thin, but you can enjoy the sharp Altec sound. There is an attenuator gap, but there is no problem playing music (Daiki Goto)
Maintenance information: 2024.4.30 The exterior bottom has been repaired and painted
Accessories: none
Main specifications: 2-way 3-speaker unit configuration/802-8T, 414-16B x 2, N-800-F dimensions W788 x H610 x D488 mm weight 43 kg/book
RCA cable 1.0m pair revision B type signature series There is little dramatization in the tone, but you can enjoy a spectacular sound field feeling as if the speaker size has been larger by one size or more. There is dullness on the plug (Kojima Yosuke)
Accessories: none
RCA cable, 1.0 m pair, hybrid conductor centered on 7N copper, the contact part is a standard model that uses rhodium plating. The cable has a sense of sound pressure in the mid-range and has characteristics suitable for jazz. There is dullness in the plating ring around the plug (Kojima Yosuke)
Accessories: none
Maintained by Denon Service! This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine (Sasaki Shota)
Maintenance information: 2024.4.26 manufacturer maintained (13 deteriorated TRs replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg