※It is inexpensive because it has dead marks. A short horn used in the 43 series. It can also be built into an enclosure, but you can hear good sound even if you attach a screwdriver and place it on top of the enclosure. On the exterior, tape marks are conspicuous. Serial 55128/55468 (Tamura Eiji)
Accessories: no accessories
Main specifications: 80 degrees horizontal and 45 degrees vertical orientation for 1" drivers Recommended crossover 1.2 kHz baffle opening diameter 108 mm depth 216 mm
2" PA horn It's cheap yet well-made, and doesn't make you feel cheap. A JBL 2-inch driver can be mounted. (TAMURA Eiji)
Accessories: no accessories
Main specifications: throat diameter 2 inches angle 60 degrees ✕ 40 degrees W315 ✕ H185.4 ✕ D154.9 mm weight 2.2 kg/book
It is inexpensive because the manufacturer label on one side is missing. The short horn used on 4343, 4344 It can be built into the enclosure, but it can also be used with a screwdriver and placed on top of the enclosure to make it sound good (Shota Sasaki)
Accessories: Nothing
Main specifications: 1 inch driver directional horizontal 80 degrees, vertical 45 degrees Recommended crossover 1.2 kHz Baffle opening diameter 108mm Depth 216mm
The short horn used on 4343, 4344 It can be built into the enclosure, but it can also be used with a screwdriver and placed on top of the enclosure to make it sound good (Shota Sasaki)
Accessories: None
Main specifications: 1 inch driver directional horizontal 80 degrees, vertical 45 degrees Recommended crossover 1.2 kHz Baffle opening diameter 108mm Depth 216mm
A short horn that fits JBL type 2 inch drivers. It is a radial type with a shape similar to an electro voice horn. Made of resin, the weight is light, and you can easily enjoy the horn sound. There is a tape mark on the back (Yoichi Murakoshi)
Accessories: none
Main specifications: Mounting 4 holes W300 × H200 × D160 mm 600g
Straight short horn for 1" driver Adopted by various speakers, it is a standard model that has been used for a long time (Shota Sasaki)
Accessories: none
Main specifications: Directional characteristics 90 (horizontal) /45 (vertical) throat diameter 2.5 cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
※ Because the texture is different on the left and right, it is inexpensive. A short horn used in 4343 and 4344. It can also be integrated into the enclosure, but you can also hear good sound by attaching a screwdriver and placing it on top of the enclosure. The appearance has a feeling of use such as dullness and scratches. (Morning Tomoho)
Accessories: None
Key Specifications: For 1" Drivers Directional Horizontal 80 Degrees, Vertical 45 Degrees Recommended Crossover 1.2kHz Baffle Opening Diameter 108mm Diameter Depth 216mm
This is a 1 inch throat for Raftcraft. I was able to install a 1-inch driver from JBL and ALTEC. The exterior is scratched, and the paint is bald. (Ryo Mizusaki)
Accessories: none
Main specifications: W132 × H115 × D180 mm 1.3 kg/1 bottle
Straight short horn for 1" driver It has been adopted in various speakers and is a standard model that has been used for a long time. Paint peels off and there is dirt (Shota Sasaki)
Accessories: Nothing
Main specifications: Directivity characteristic 90° (horizontal) /45° (vertical) throat diameter 2.5 cm Crossover frequency 500 Hz or more Horn total length 216 mm 1.1 kg/1
Straight Short Horn for 1" Driver It is a long-used standard model that is used in a variety of speakers. Painting is peeled off (Tetsuji Oikawa)
Accessories: None
Main specifications: Directional characteristics 90( horizontal) /45( vertical) throat diameter 2.5cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
I cut the price! 2021/3/10 Selling price 15,000 yen ※ It is inexpensive because of poor condition. BL exponential horn. The long horn allows for use at low crossover frequencies. It is possible to create highly directional monitor sound in conjunction with acoustic lenses. Appearance has a noticeable rubber-based dump material mark. Serial 11206/11239 (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Crossover Frequency 800Hz Sound Pressure Level 108 dB (2308 Lens Use) Throat Diameter 2.5cm Diameter 156 × D293mm Weight 1kg/This
price cut! 2021/6/12 selling price 12,000 yen 1 inch driver straight short horn It has been adopted by various speakers and is a standard model that has long been used. The appearance has Slight Scratch. (YONEJIMA Satoshi)
Accessories: no accessories
Main specifications: Directional characteristics 90 (horizontal) /45 (vertical) throat diameter 2.5 cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
Unspecified short horn for 1 inch. JBL can be mounted. The exterior has peeling paint and stains (Tamura Eiji)
Accessories: No accessories
Main specifications: W190 x D119 x H126 mm
Shorthorn very similar to JBL shorthorn 2307. The previous owner installed and used the company's 2420. There is some dullness (Murakoshi Yoichi)
Accessories: none
Main Specifications: Total length 220mm Bolt pitch: 100mm on exit side 50mm on entrance side
I cut the price! 2021/3/10 Selling price 19,800 yen ※ It is cheap because of poor condition. Flat-front vial horn for small and lightweight type It helps to make horizontal characteristics constant and to correct driver characteristics. It is a horn that stretches well in the middle range, and it is difficult to get noisy feeling in the high range. It is suitable for a slightly smaller system. (Kimiya Miura)
Accessories: No accessories
Main Specifications: Throat Diameter 25mm Compatible Driver 2426H/J Use Minimum Frequency 500Hz Recommended Lowest Crossover Frequency 630Hz High Density Polyurethane W448 x H173 x D174mm 1.4kg