The price has been reduced! 2024/5/20 sales price 148,000 yen JBL large horn set 2360H and 2360T. It's perfect for those who want to experience the intense and open sound of a horn. A self-made mounting stand is also included, so you can quickly attach it to the enclosure. In addition to dullness and small scratches on the exterior, there is a feeling of use such as peeling paint (Hiroki Aso)
Accessories: self-made stand
Main specifications: 2360H 2 inch driver radial horn recommended crossover 500 Hz overall size W792 x H786 x D894 mm weight 18.2 kg (actual measurement)
The price has been reduced! 2023/5/10 sales price 18,000 yen Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Asae Tomoho)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
JBL's exponential horn. Since it is a longhorn, it can be used at low crossover frequencies. Together with an acoustic lens, it is possible to create a monitor sound with high directivity. The exterior has bald paint, dirt, etc. Serial 20444/20547 (Tamura Eiji)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses) throat diameter 2.5 cm diameter 156 x D 293 mm weight 1 kg/book
Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/20 sales price 198,000 yen ※It is cheap because there is dirt, cigarette smell, and part of the stay is broken. Comes with stand 2505! 2 inch horn+ lens with huge slant plate. As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. The exterior has line scratches and paint peeling. Serial 17862, 18641 (Fujisawa Yukishi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
This wood horn is compatible not only with FOSTEX drivers, but also with JBL 1-inch drivers (3-point stop). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Asaine Tomoho)
Accessories: none
Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch wood parallel plywood W444 × H90 × D293 mm 3.1 kg (actual measurement)
The price has been reduced. 2024/4/1 sales price 19,800 yen JBL straight short horn for 1 inch drivers. It is a standard horn that has been used in various models. There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: Orientation characteristics 90° (horizontal) 45° (vertical) throat diameter 2.5 cm, crossover frequency 500 Hz or more, total length 216 mm, 1.1 kg/1
The price has been reduced! 2024/3/26 sales price 26,800 yen The sound spread is very good, and it seems to be good for PA systems. Rather than sending sound with a large output, it is a horn that feels like it can deliver a wide range of clean and organized sounds. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main Specifications: Compatible Driver JBL 2 inch (2446H/J 2450H/J 2485J, etc.) Throat Diameter 49mm 120°X40° Recommended Crossover 500Hz Baffle Opening Diameter W403xH238mm (front mount) W445xH279xD236mm 1.6 kg (1)
The disposal price has been reduced. Member discounts are not applicable. 2024/2/29 sales price 39,800 yen This is a bi-radial horn that uses an optimized aperture design. The horn's throat can be directly connected to the driver's phase plug, and we have succeeded in optimizing system performance. The main body is made of plastic reinforced with fiberglass, which maintains strength while reducing weight and eliminates resonance. *Since this is a 1.5 inch throat horn, a 2 inch throat driver cannot be used. There are small scratches on the entire exterior. Serial 005060, 005019 (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible unit 2447H/J, 2451H/J crossover frequency 500 Hz throat diameter 38 mm W559 × H457 × D254 mm 2.2 kg
The price has been drastically reduced. 2024/2/29 sales price 17,800 yen Small and lightweight flat front bi-radial horn. It is useful for stabilizing horizontal characteristics and correcting driver characteristics. It is a horn that stretches well in the middle range, making it difficult to feel noisy in the high range. Suitable for slightly smaller systems (Kanai Hidetsugu)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver, 2426H/J, use minimum frequency of 500 Hz, recommended minimum crossover frequency of 630 Hz, made of high density polyurethane, W448 x H173 x D 174 mm, 1.4 kg
This horn is designed for LE85 and LE175. Since the effective length of the exponential horn has been lengthened, the connection with the woofer is smoother. There are scratches and repair marks on the exterior. Serial 7428/9098 (Tamura Eiji)
Accessories: No accessories
Main specifications: throat diameter 2.5 cm, crossover frequency 800 Hz or higher, compatible models/LE175, LE85 horn total length 293 mm (horn depth only) dimensions W250 x H150 x D60 mm weight 2.7 kg
A rare Yamamoto sound craft wood horn. It is a diffraction horn made of Asada cherry wood, which is beautiful in terms of sound quality and appearance, and the company is particular about it. Compatible with JBL 1 inch drivers. There are some scratches on the exterior. Serial 605021/605022 (Tamura Eiji)
Accessories: none
Main specifications: diffraction horn recommended crossover frequency 800 Hz compatible driver TAD 2001, JBL LE175, LE85, 2420, 2425, 2426, etc. 1 inch driver W448 x H140 x D269 mm 5.6 kg
The price has been reduced! 2024/2/22 The EXCLUSIVE Sectoral Wood Horn has arrived for the first time in a long time at a sales price of 99,800 yen! This horn is ideal for TD-2001, ED-911, etc. You can enjoy the exquisite sound of Japanese maple plywood with this wooden horn. A JBL 1 inch driver can also be attached. There are scratches and scratches on the exterior. Serial BC1012/BC1013 (Tamura Eiji)
Accessories: No accessories
Main specifications: Sectoral wood horn cutoff frequency 325 Hz mounting pitch diameter 57.2 mm throat opening hole diameter 25.4 mm opening dimensions W630 x H80 mm horizontal opening angle 120 degrees W630 x H90 x D381 mm 5.9 kg
The price has been reduced. 2024/2/18 sales price 45,000 yen ※Since there is no dedicated slot for 2328, it is cheap. JBL's large radial horn is now in stock. You can experience the dynamic sound full of penetrating power unique to 2-inch drivers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: recommended crossover 500 Hz size W810 x H210 x D510 mm weight 11.6 kg
※Since special slot adapters 2328 and 2329 are not included, it is inexpensive. A large radial horn developed for professional use. The exterior is 60 degrees horizontal and 40 degrees vertical, and you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: crossover 500 Hz sound pressure level (new JIS) 114 dB W613 x H203 x D508 mm 11.2 kg
The price has been drastically reduced. 2024/2/18 sales price 248,000 yen with stand 2505! 2 inch horn+ lens with huge slant plate As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. You can see a feeling of use on the exterior, paint removal, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
※The paint on the throat part is in poor condition, such as peeling paint and scratches, etc., so it is inexpensive. A combination of a 2-inch driver horn and acoustic lens used for short-range PAs and monitors. It makes 2441, 2440, etc. sound sharp. Recommended for those who think the sound is too high with a radial horn (Ryo Mizusaki)
Accessories: none
Main specifications: directivity: horizontal 100° x vertical 45°, throat diameter: 51 mm, crossover frequency: 800 Hz, 5.2 kg (actual measurement)
Comes with a dedicated stand! Professional acoustic lenses in the shape of a “beehive”. If you combine 375 or 2440, you can enjoy the feeling of extrusion that can only be experienced with this horn and a sense of energy that is bathed in your whole body. The exterior has stains, etc., but it is a beautiful individual for its age. Serial 1172/1174 (Tamura Eiji)
Accessories: stand
Main specifications: 2 inch driver horn crossover frequency 500 Hz throat diameter 50 mm W343 x H420 x D420 mm 13.6 kg
The price has been reduced. 2024/1/21 sales price 19,800 yen A short type bi-radial horn that is light and easy to use. It has a light sound loss, and you can enjoy a good sound that won't lose even when matched to a larger system (Takasaki Atsushi)
Accessories: none
Main specifications: Bi-radial horn cutoff 400 Hz horizontal 90 degrees vertical 40 degrees foam resin W445 x H279 x D236 mm baffle opening dimensions W403 x H238 mm (front mount) baffle plate W590 x H400 mm 3.9 kg/unit
First arrival! 2" wood horn JBL and TAD 2-inch drivers can be used. How about it together with the TCX-1500AL enclosure which is in stock at the same time. There are small scratches and paint peeling (Oikawa Tetsuji)
Accessories: none
Main specifications: W520 x H235 x D380 mm 8.4 kg
A short bi-radial horn that is light and easy to use. It has a light sound loss, and you can enjoy a good sound that won't be lost even when paired with a larger system. There are small scratches, dullness, dirt, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: Bi-radial horn cutoff 400 Hz horizontal 90 degrees vertical 40 degrees foam resin W445 x H279 x D236 mm baffle opening dimensions W403 x H238 mm (front mount) baffle plate W590 x H400 mm 3.9 kg/unit
Shorthorn very similar to JBL shorthorn 2307. The previous owner installed and used the company's 2420. There is some dullness (Murakoshi Yoichi)
Accessories: none
Main Specifications: Total length 220mm Bolt pitch: 100mm on exit side 50mm on entrance side
The disposal price has been reduced. Member discounts are not applicable. 2023/12/24 sales price 10,000 yen. Unknown 1.5 inch horn. There are 4 holes, but they didn't fit JBL drivers. The material is easy to process, so why not adjust it yourself? The exterior has scuffs and a feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W457 x H304 x D204 mm throat diameter 163 mm throat pitch 120 mm 2.6 kg
For JBL 1" drivers, commonly known as beehive horns. Recommended for LE175 and LE85 users. There is a feeling of wear such as rust, small scratches, scuffs, etc. on the exterior (Kobayashi Hitoshi)
Accessories: none
Main specifications: Recommended crossover frequency 1200 Hz directivity 60 degrees (cone) horn total length 171 mm Compatible units LE175, LE85
Significant price reduction. 2023/12/11 sales price 19,800 yen JBL bi-radial horn. It is a short type that is easy to use. The lightness and ease of removal is attractive. You can enjoy the good sound even when matched to a larger system. The logo seal is missing (Daiki Goto)
Accessories: none
Main specifications: Bi-radial horn cutoff 400 Hz horizontal 90 degrees vertical 40 degrees foam resin W445 x H279 x D236 mm baffle opening dimensions W403 x H238 mm (front mount) baffle plate W590 x H400 mm 3.9 kg/unit
The price has been drastically reduced. 2023/12/7 sales price around 178,000 yen is good! Large wood horn Solid construction and a lot of weight! It seems to fit JBL and TAD 2 inch drivers. You can enjoy the thick, rich sound (Fujisawa Yukishi)
Accessories: none
Main specifications: recommended crossover frequency 600 Hz throat diameter 49 mm 2 inch driver W635 x H230 x D365 mm approx. 18 kg
It is probably my own work that imitates a JBL 2329 double throat. It can be attached to JBL 2350, 2355, 2397 horns, etc. A 2 inch slot such as a JBL 2440 or 375 is suitable as a driver. (FUJISAWA Koshi)
Accessories: none
JBL 2328 with slot This horn was made to match Yamaha's JA-6670 and JA-6681. The quality of construction is amazing at Yamaha. There is a slight feeling of use, but it is a beautiful individual for the model year (Fujisawa Yukishi)
Accessories: none
Main specifications: cutoff frequency 230 Hz, W725 x H250 x D580 mm, approx. 11.5 kg
※There is no label, and it is painted black, so it is inexpensive. Attach a 2 inch driver such as a large professional radial horn 2440 and enjoy the thick, exciting sound. The strong sound pressure that comes straight out is impressive. It is also recommended as an introduction to large horns (Fujisawa Yukishi)
Accessories: none
Main specifications: crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 × H615 × D 215 mm 13.8 kg/book 11.3 kg
Disposal prices have been reduced! (Member discount is not applicable) 2023/12/4 sales price 10,000 yen 2 inch horn with unknown details. The previous owner had a JBL/2445J mounted on it. The exterior has rust, scuffs, etc. (Hiroki Aso)
Accessories: none
Main specifications: opening diameter 225 x 220 mm, opening screw pitch length 238 x width 252 mm, slot part diameter 50 mm, slot part screw pitch 72 mm, W280 x H295 x D265, 1.8 kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/4 sales price 8,000 yen ※It is cheap because the construction is different on the left and right. Unspecified 2" horn. The previous owner had a JBL/2445J mounted. In addition to rust and scuffs on the exterior, the color is different on the left and right, and the inner structure is different (Hiroki Aso)
Accessories: none
Main specifications: aperture diameter 225 x 220 mm opening screw pitch length 238 x width 252 mm throat diameter 50 mm throat part screw pitch 72 mm W280 x H295 x D 265 mm 1.8 kg/1
Beautiful item with original box and dedicated stand! A “beehive” type professional acoustic lens. If you combine 375 or 2440, you can enjoy a sense of extrusion that can only be experienced with this horn and a sense of energy as if you were being bathed in with your whole body. ※What was originally an unopened item has only recently been opened. There is some deterioration over time, and there are very slight small scratches, but it is in a beautiful state. Serial 3447 3463 (Yamato Yuki)
Accessories: Stand for original box (JBL2505)
Main specifications: 2 inch driver horn crossover frequency 500 Hz throat diameter 50 mm W343 x H420 x D420 mm 13.6 kg
Disposal prices have been reduced! (Member discount will not apply) 2023/11/8 sales price 148,000 yen wood horn with unknown details. It feels like the horn that was originally mounted on the speaker has been removed. It has a pretty solid construction, and the JBL 375 was originally mounted on it. The exterior has scratches, peeling, etc. (Tamura Eiji)
Accessories: no accessories
Main specifications: W660 x H60 x D360 mm, weight 9.8 kg
Unspecified short horn for 1 inch. JBL can be mounted. The exterior has peeling paint and stains (Tamura Eiji)
Accessories: No accessories
Main specifications: W190 x D119 x H126 mm
Comes with a dedicated stand! A “beehive” type professional acoustic lens. If you combine 375 or 2440, you can enjoy a sense of extrusion that can only be experienced with this horn and a sense of energy as if you were being bathed in with your whole body. The exterior is generally beautiful with no noticeable scratches. Serial 01645 01719 (Asaina Tomonori)
Accessories: stand
Main specifications: 2 inch driver horn crossover frequency 500 Hz throat diameter 50 mm W343 x H420 x D420 mm 13.6 kg
The price has been reduced. 2023/10/6 Sales price 10,000 yen ※1 bottle only. This is a rare JBL bi-radial horn. It is thicker and heavier than the 2385A, and is well built. The 2385 is a fixed directional horn with a slightly narrowed horizontal direction angle compared to the 2380, and the sound pressure level is about 2 dB higher. Also, the throat diameter, horn length, and opening dimensions are the same as 2380. The exterior has scuffs, scratches, and stains. Serial 021530 (Tamura Eiji)
Accessories: no accessories
Main specifications: directivity (-6 dB points) horizontal 70° (500 Hz to 16 kHz) vertical 40 degrees (2 kHz to 16 kHz) throat diameter 5 cm dimensions W445 x H279 x D236 mm weight 4.6 kg/1 bottle
The price has been reduced. 2023/7/16 sales price 49,800 yen 2inch straight short horn. Compared to 2350, etc., there is little afterglow, and it has a sharp sound that comes off quickly and disappears quickly. It's a straight yet straightforward sounding character, and it's the perfect size for those who want to embed both horn and tweeter into an enclosure. The appearance, paint peeling, scuffs, dullness, etc. can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: 500 Hz to 90 degrees horizontally 45 degrees vertically
2 inch horn from JBL. It is made of sturdy, heavy resin. The sound removal is very good, and you can enjoy a sound that won't be lost even when paired with a larger system. You can see the appearance, dullness, abrasions, etc. of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: bi-radial horn recommended crossover frequency 500 Hz cutoff frequency 400 Hz horizontal 90°, vertical 40° throat diameter 5 cm screw pitch (left and right) 122/178/122 mm (up and down) 129/129 mm W445 x H279 x D236 mm 5.0 kg
Product currently on sale. JBL's 2 inch to 1 inch conversion throat. It is an essential item when attaching a screwdriver with a throat diameter of 2.5 cm to a horn with a throat diameter of 5 cm. The appearance is generally good with small scratches (Kobayashi Hitoshi)
Accessories: 6 screws
Main specifications: opening 2 inch side 49 mm 1 inch side 25 mm W120 x H105 mm approx. 0.5 kg
The price has been reduced. 2023/8/3 sales price 49,800 yen 2inch straight short horn. Compared to 2350, etc., there is little afterglow, and it has a sharp sound that comes off quickly and disappears quickly. It's a straight yet straightforward sounding character, and it's the perfect size for those who want to embed both horn and tweeter into an enclosure. Exterior, generally good (Murakoshi Yoichi)
Accessories: none
Main specifications: 500 Hz to 90 degrees horizontally 45 degrees vertically
This is JBL's rare 2-inch driver single-throat adapter. If you have 2397 or 2350, don't miss this opportunity. The exterior is dark and there is a lot of feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: W128 x H122 x D100 mm 1.1 kg/book for horn JBL 2350/2355/2397
The price has been reduced. 2023/7/31 sales price 69,800 yen JBL wooden horn for 2 inch screwdrivers. Since it was originally designed only for concert halls, it is a horn that spreads sound over a wide area without difficulty. Since it's made of wood, it has a warm, soft tone that is different from metal. There are abrasions on the back side of the individual on one side of the exterior, but the others are about dullness and can be said to be generally good (Kobayashi Hitoshi)
Accessories: none
Main specifications: directionality 140 degrees x 60 degrees (horizontal x vertical), crossover frequency 800 Hz, W660 x H95 x D340 mm, weight 4.4 kg
The price has been reduced. 2023/7/25 sales price 39,800 yen The large electric voice horn has a clear, open sound, and you can enjoy the unique three-dimensional effect of vocals, etc. It is a convenient specification that allows a JBL 2-inch screwdriver to be attached. There are line scratches, paint peeling, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: 2 inch radial horn driver mounting part outer diameter 128 mm throat diameter 50 mm screw pitch (diagonal) 102 mm W712 x H334 x D434 mm approx. 3.8 kg
JBL SELENIUM PRO DRIVER HORN Since it's made of aluminum, it has a good sound and makes a light sound. The installation is also light and the screw type makes it easy to handle. The company's driver D220TI can be mounted. (TAMURA Eiji)
Accessories: There are no accessories
Main specifications: cutoff frequency 1200 Hz throat 1 inch opening dimensions 235 x 125 mm W274 x H164 x D151 mm 0.82 g
This is a conversion throat that fits JBL's 1 inch and 2 inch screw holes. The manufacturer is unknown, but it is made of solid metal. There is paint loss on the mounting surface (Murakoshi Yoichi)
Accessories: none
Main specifications: opening 1.5 inch side 51 mm, 1 inch side 38 mm, outer diameter 120 mm, height 50 mm
1 inch to 2 inch conversion adapter by JBL Professional Grey shrink-coated throats are rare. There is some dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: 1 inch side diameter 102 mm, inner diameter 36 mm, 2 inch side diameter 120 mm, inner diameter 50 mm, height 650 mm
A good, unused item! It comes with a special stand and original box! Professional “beehive” type acoustic lens. If you combine 375 and 2440, you can enjoy the sense of extrusion that can only be experienced with this horn and the energy of being bathed with your whole body. (SASAKI Shota)
Accessories: original box, special stand
Main specifications: 2 inch driver horn crossover frequency 500 Hz throat diameter 50 mm W343 x H420 x D420 mm 13.6 kg
JBL 1-inch driver straight short horn It has been used in various models and is a standard model. Something like glue is stuck (Daiki Goto)
Accessories: none
Main specifications: Directional characteristics 90° (horizontal) 45° (vertical), throat diameter 2.5 cm, crossover frequency 500 Hz or more, horn total length 216 mm, 1.1 kg/1
The price has been reduced! 2023/6/17 sales price 39,800 yen ※ It is cheap because some paint, peeling, etc. are in poor condition. A compact radial horn. A JBL compression driver with a 2.5 cm throat diameter can be attached. It is made of die-cast aluminum, and the outside is coated with the special damping agent Lansa Plus to prevent resonance. The exterior has peeling and some signs of irritation. Serial 17424/17430 (Tamura Eiji)
Accessories: There are no accessories
Main specifications: directivity (horizontal x vertical) 90 x 40 crossover frequency 800 Hz W584 x H140 x D394 mm 9.1 kg