Hybrid phase equalizing plug (brass+copper) for B&W. The sound changes so that you can't see it just by changing it. It's worth a try. There is a slight haze (Fujisawa Yukishi)
※The arm holes have been machined. According to actual measurements, the hole diameter was 210 mm. Arm base for MICRO record players SX-8000, RX-5000, RX-3000, 1500 series, and DQX-1000. It is a model painted matte black on brass (Fujisawa Yukishi)
Accessories: none
Main specifications: W80 x H20 x D140 mm, weight 1.2 kg, arm mounting hole diameter 210 mm, hole pitch (between centers) 4.3 mm (actual measurement)
It is an arm base that can be used for the 1500/5000/8000 series of micro. It is built in sturdy. (Fujisawa Yukishi)
Main Specifications: Brass Arm Base Compatible Arms: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C, DENON DA-303/305/307/309/401, FR FR-54/24MK2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/840FB/940/945S, etc.
Arm base for micro/SX-8000/5000/3000/1500 series by VYOYO in Osaka Compatible with SME long arm (3012/3012R) No arm mounting screws, there is rust on the shaft mounting screw, some dullness (Yoichi Murakoshi)
Accessories: None
Main specifications: Weight 1kg (actual measurement)
It is an arm base that can be used for the 1500/5000/8000 series of micro. It is built in sturdy. (Fujisawa Yukishi)
Main Specifications: Brass Arm Base Compatible Arms: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C, DENON DA-303/305/307/309/401, FR FR-54/24MK2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/840FB/940/945S, etc.
The price has been reduced! 2024/3/4 sales price 6,000 yen The Texas Instruments high-precision high-speed operational amplifier OPA627AU is mounted on both sides of an 8-pin DIP conversion board, and it is an operational amplifier famous for its high sound quality (Jun Tamai)
Accessories: original instruction manual box
Main specifications: input voltage noise density 4.5 nV gain bandwidth at 10 kHz 16 MHz slew rate 55 V/us operating voltage ± 4.5 to 18 V
The price has been reduced! 2024/3/4 sales price 6,000 yen The Texas Instruments high-precision high-speed operational amplifier OPA627AU is mounted on both sides of an 8-pin DIP conversion board, and it is an operational amplifier famous for its high sound quality (Jun Tamai)
Accessories: original instruction manual box
Main specifications: input voltage noise density 4.5 nV gain bandwidth at 10 kHz 16 MHz slew rate 55 V/us operating voltage ± 4.5 to 18 V
This is a Lustre arm lifter made by Koshin Electric. This arm lifter is convenient for playing records. How about taking this opportunity? On the exterior, you can see a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W30×H44×30mm
Speaker stand using Aomori Hiba wood. The former owner seems to have been used for JBL4348. There is a small wound (Oikawa Tetsuji)
Accessories: none
Main specifications: W587 × H185 × D400mm 5.1kg
A self-made attenuator. 16 contact volume is used, Tektron T-245L-20600 × 2 20kΩ (seems to be a custom-made product) is used. The gain is low. The range of motion of the knob is narrow and only goes up until 12:00 (Oikawa Tetsuji)
Maintenance Information: 2022.5.3 Confirmation
Accessories: None
Main specifications: W370 × H126 × D370mm 10.3 kg (actual measurement)
Speaker stand with a beautifully pasted JBL logo. How about a medium sized bookshelf? It is also possible to set up diagonally depending on how to place it. Unevenness of painting on the back bottom side (Yoichi Murakoshi)
Accessories: none
Main specifications: W305 × H84 × D317mm 0.7kg