A self-made board with a rubber board sandwiched between trees. A damping effect can be expected. There are scratches, dullness, and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: W441 × H20 × D582 mm 3.9 kg
Set of 4 unspecified carbon insulators. Comes with a screw (M8 x 13 mm). How about the feet of players etc. There is a feeling of use such as dullness (Hiroki Aso)
Accessories: none
Main specifications: diameter 57 φheight 42 mm weight 180 g (actual measurement)
Self-made gunmetal turntable. It weighs 2.6 kg. When I replaced the rubber sheet, the performance parts were perfectly divided and sharpened. Recommended for those who like a tight sound. There is dullness and dirt (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 290 mm, thickness 5 mm
A self-made board with a rubber board sandwiched between trees. A damping effect can be expected. There are scratches, dullness, and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: W483 × H15 × D437 mm 2.4 kg
Set of 4 unspecified carbon insulators. There is a feeling of use such as dullness (Hiroki Aso)
Accessories: none
Main specifications: diameter 56 mm, height 30 mm, weight 176 g (actual measurement)
This is a box for self-made records. Since it is well-made, it can also be used as a rack for amplifiers, etc. The exterior is dull and dirty (Tamura Eiji)
Accessories: No accessories
Main specifications: W548 x D450 x H395 mm
A self-made board with a rubber board sandwiched between trees. A damping effect can be expected. Kusumi, there is a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: W400 × H15 × D300 mm 1 kg
JBL Horn Gold Wing Wood Stand If you were looking for it, please take this opportunity. There is a feeling of use such as small scratches. (Jun Takasaki)
Accessories: None
Main Specifications: W510 × H215 × D470mm 4.3kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/2/2 sales price 3,000 yen This is a wooden self-made cabinet that can be equipped with a DENON DP-3000. There are a few scratches, etc., but it is well-made by laminating. There is a feeling of making it yourself (Tomonori Asae)
Main specifications: size 600 x 110 x 450 weight 9.9 kg (actual measurement)
The price has been reduced. 2023/3/25 sales price 15,000 yen. Self-made 2" screwdriver stand. Used to support ALTEC and JBL drivers. Felt is affixed to the installation surface (Murakoshi Yoichi)
Main specifications: W300 x H370 x D92 mm (height up to the bottom of driver installation 280 mm) 1.9 kg
A self-made cabinet with an SME3012R attached to it. An aluminum frame is attached to plywood and foot screws are embedded. The head of a screw is simply placed on an insulator that has been diverted from another source. There are uneven varnish, kusumi, and plywood flipping of hole corners (Kanai Hidetsugu)
Accessories: insulator ()
Main specifications: W603 × H54 (body plate H45) × D453 mm Weight 4.7 kg
Turntable hole φapprox. 310mm, screw hole φ8mm, tone arm hole 70×45mm
This attenuator uses a carbon variable resistor RV24YN 50kΩ. The exterior is dull, etc., and there is a feeling of use (Morning Inachi Law)
Maintenance Information: 2022.11.13 Operation confirmed
Accessories: none
Main specifications: size 160 x 95 x 170 mm weight 680 kg (measured value)
Large record player dust cover made of 3mm thick acrylic board. There are 2 cuts to escape the cable (Fujisawa Yukishi)
Accessories: none
Main specifications: W515 × H255 × D410 mm (measured value)
Speaker stand with a beautifully pasted JBL logo. How about a medium sized bookshelf? It is also possible to set up diagonally depending on how to place it. Unevenness of painting on the back bottom side (Yoichi Murakoshi)
Accessories: none
Main specifications: W305 × H84 × D317mm 0.7kg
Line transformer A line transformer incorporating Tamura A-8711 and TN-6. With gain volume. The polite and smooth sound softens the sound a little, and the depth comes out in the mid-range sound. There is dullness in the body (Yosuke Kojima)
Accessories: none
Main specifications: W130 × H133 × D22 mm9 3 kg
Speaker selector with 2 inputs and 3 outputs. The exterior has a feeling of use such as dullness and scratches. Rubber tape is attached to the bottom (Tomonori Asaine)
Maintenance Information: 2022.11.12 Continuity Confirmed
Accessories: none
Main specifications: External dimensions W145 x H45 x 135 mm Weight approx. 376 g (actual measurement)
Self-made attenuator with unknown details. BNC specification (Oikawa Tetsuji)
Maintenance information: 2023.10.10 Operation confirmed
Accessories: none
Main specifications: W120 x H160 x D80 mm, weight 600 g (actual measurement)