Clearance discount! (former price: 198,000JPY)
This is a hybrid model of PD-300 and 3009S2. PD-300 has an excellent arm mount with smooth rotation and strength and it was combined with the masterpiece 3009S2. Without manipulation, the player plays solid and rich sound. The rear plate has some fatigues including dents.
*Vacuum Disc Stabilizer on this player does not work. Rotation switch has looseness but not repaired due to unavailability if the replacement parts.
The price has been reduced! 2023/9/24 Sales price 148,000 yen Maintenance completed! A classic combination of the highly reliable DD motor LUX PD121 and the standard SME/3009S2IMP light needle pressure arm. A stylish design that's suddenly hard to believe from a 70s player. The sound quality is also far from domestic production, and the sound is delicate, soft, and spreads smoothly into space. The exterior has scratches on the turntable mat, small scratches, and dullness on the dust cover. Serial H7903860 (Yonejima Satoshi)
Maintenance information: 2023.9.24 operation confirmed 2023.2.24 maintenance completed (processed and replaced with a stroboscope ultraviolet LED. Rotation adjustment trimmer volume exchange adjustment. Electrolytic capacitor replacement. Arm board and arm cleaning. (Arm operation, voice check)
Accessories: copy of instruction manual
Main Specifications: [PD121] Direct Drive 50/60 Hz Compatible W470 x D390 x H160 mm [3009S2IMP] Light Needle Pressure Arm Static Balance Type Total Length 322 mm Effective Length 299 mm Needle Pressure Range 0 to 1.5 g (0.25 g steps)
Disposal price cut! (Member discount not applicable) 2021/5/30 Sales price 198,000 yen*Because of deterioration of rubber such as turntable vacuum mechanism packing, it is inexpensive because it does not adsorb discs. Set WE-407/23 on turntable equipped with vacuum disk stabilizer with servo It also goes well with a heavyweight turntable by belt drive and tone arm of sharp sharp sound, and you can enjoy a crisp clear and dense timbre. Appearance, there are dullness and scratches. Serial D2811877/D2802135 (Kimiya Miura)
Maintenance Information: 2021.6.3 Maintenance (Rotating indicator lamp LED replacement. Rotation switching switch disassembly contact cleaning contact grease application. Servo circuit electrolytic capacitor replacement. Pitch volume center adjustment Arm cleaning operation check voice check (Vacuum pump inspection, turntable packing inspected, but due to deterioration of pump side, table side, diaphragm, packing etc., can not be adsorbed and vacuum mechanism cannot operate)
Accessories: Instruction manual, power supply unit, EP adapter
Main Specifications: [PD-310] Belt Drive Brush & Slotless DC Servo Motor (FG Servo) 30cm Aluminum Die Cast, 3.5kg Moment of Inertia 500kg · cm2 W490× H175 × D390mm Weight 16 kg [VS-300] W90 × H140 × D390mm 6kg [WE-407/23] Static Balanced Type Needle Pressure 0-4g Total Length 311 mm Effective Length 233mm overhang 12mm cartridge own weight 23g to 33.5g
The disposal price was reduced. Member discounts are not applicable. 2021/9/14 Selling price 168,000 yen* Due to deterioration of the turntable part packing air leakage, vacuum adsorption does not work and it is the current situation. A record player equipped with a vacuum tube stabilizer function. It goes well with SAEC's arm WE-308, combined with the delicate expressiveness of the double knife edge and the quiet and stable rotation of the player, resulting in a very smooth and deep sound ( (Hirotsugu Kondo)
Maintenance information: 2021.9.12 Maintained (33/45 changeover switch was replaced due to poor contact. I replaced the servo circuit and other circuit capacitor. PU code RCA plug connection was corrected. I cleaned the arms and others. Pump mechanism inspection, turntable part packing deterioration air leakage could not be adsorbed. (I checked the others)
Accessories: instruction manual, dust cover, VS-300
Main specifications: Belt drive (thread drive possible) Brush & slotless DC servo motor, body part W490 × H175 × D390mm Weight 16 kg Vacuum part W90 × H140 × D390mm Weight 6 kg
Comes with SAEC arm stabilizer AS-500! A record player highly praised for the smoothness of rotation and the effectiveness of the insulator's suspension. The arm is WE-308, which features crisp sound with a double knife edge and accurate sound image localization. It's a combination where you can fully enjoy the fun and depth of analog with LUX's smooth, quiet motor and SAEC's arm that cuts sharply into the sound source. The exterior is dull and has small scratches. Serial G8903281 (Yonejima Satoshi)
Maintenance information: 2020.6.2 Maintained (created with strobe circuit LED. diode installation. Electrolytic capacitor replacement. Power circuit film capacitor replacement. Inside Force cancellation weight exchange)
Accessories: copy of instruction manual, phono cable
Main Specifications: PD-131 Direct Drive System 8 Pole 24 Slot Brushless DC Servo Motor W472 x H160 x D372 mm Weight 12 kg WE-308 Double Knife Edge Static Balance Universal Type Total Length 240 mm Effective Length 240 mm Overhang 5 mm Needle Pressure 0 to 2 g
The disposal price has been reduced. Member discounts are not applicable. 2024/4/21 sales price 148,000 yen ※ The hinge is damaged, but there are no replacement parts, so this is the current situation. Maintained! Armless PD444 Long arms and short arms can be set, and an original system can be built by placing an arm of your choice on it. The highly rigid chassis and flexible suspension create a tight, easy-to-see sound (Murakoshi Yoichi)
Maintenance information: 2024.4.20 maintenance (power supply circuit, motor servo circuit electrolytic capacitor replacement, power lamp LED replacement, each rotation lock check. (Arm base lock lever with E-ring attachment)
Accessories: motor fixing beads, EP adapter, dust cover, instruction manual, armrest
Main specifications: Direct drive system, quartz control, 30cm, die-cast aluminum turntable, 33/45 rpm, 2 speed switching, W664 x H160 x D392 mm, 22 kg
The disposal price has been reduced. Member discounts are not applicable. 2022/4/28 Sales price 168,000 yen* Turntable part packing deterioration Due to air leakage, vacuum adsorption is ineffective and it is the current situation. A record player equipped with a vacuum tube stabilizer function. It also goes well with the SAEC arm WE-308, and the delicate expressiveness of the double knife edge, coupled with the quiet and stable rotation of the player, results in a very smooth and deep sound
Maintenance Information: 2021.9.12 Maintained (33/45 changeover switch replaced due to poor contact. I replaced the servo circuit and other circuit capacitors. The PU cord RCA plug connection has been corrected. I cleaned the arms and others. Pump mechanism inspection, turntable part packing deterioration It could not be adsorbed due to air leakage. (I checked others)
Accessories: instruction manual, EP adapter, phono cable
Main specifications: belt drive (thread drive possible) brush & slotless DC servo motor, body part W490 × H175 × D390 mm Weight 16 kg Vacuum part W90 × H140 × D390 mm Weight 6kg