A miniature version of the masterpiece speaker NS-1000M. A small speaker system developed for theater sound. The bright and sharp sound quality is attractive. The exterior is dirty and dull (Hiura Katsutsugu)
Maintenance Information: 2023.7.5 Sound output confirmed
Accessories: saran net
Main specifications: 3-way sealed (anti-magnetic) 6 ohms playback frequency band 70 Hz to 24 kHz W150 x H275 x D180 mm 3.0 kg
Yamaha's compact monitor was created with a focus on the advent of the digital age. It is a sibling aircraft of the NS-1000M, which is known for its compatibility with Senmoni. It is an easy-to-use model with a tone that makes you feel the transparency of the NS-1000M. The rear SP terminal has been remodeled. There are dullness and small scratches due to use over time (Sasaki Shota)
Maintenance Information: 2023.7.4 Sweep Test Good
Accessories: none
Main specifications: 6 ohm frequency band 50 to 40,000 Hz crossover 2,000 10,000 Hz W270 x H410 x D255 mm 9.5 kg
HAMILEX speaker stand Depending on how the connecting plate is attached, the width is 330 mm and 300 mm, and it is possible to install it by changing the direction of height and depth. It's just the right size for mid-size speakers such as the YAMAHA NS-1000M. The exterior has peeling and abrasions on the veneer (Mizusaki Ryo)
Accessories: instruction manual
Main specifications: W300 (330) x 250 x 300 mm, weight 5.4 kg/unit
Refresh by replacing 54 capacitors, 80 transistors, and other deteriorated parts! The clear and refreshing sound has been revived. This is the 3rd generation model in the CA-1000 series. Even though the CA-2000's specs have been reduced, its sound characters are the same. It is also convenient to be able to switch instantly between Class A operation and Class B operation with switching. As for the exterior, there are chips on the back of both side panels, and a feeling of use such as dullness and small scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2023.3.25 Maintained (chemicon, transistor, heat dissipation sheet, SP terminal, RCA terminal, semi-fixed resistor, relay, resistor, diode, fuse, op amp, meter lamp replacement. VR contact cleaning, SW type ultrasonic cleaning. Substrates are re-soldered and flux removed. (Semi-fixed VR adjustment, in-flight cleaning, waveform check, input/output check, various function check F special check, input/output waveform confirmation, load test)
Accessories: instruction manual (copy)
Main specifications: Class B operation 100W+100W (8Ω) Class A operation 20W+20W (8Ω) phono MM/MC compatible W461 x H170 x D360 mm 19 kg
*Currently on sale. A low-cost model that imitates the NS-1000M model. It shows performance comparable to 1000M, which is above the price. A feeling of use can be seen on the exterior, abrasions, bruises, dullness, etc. (Kobayashi Hitoshi)
Maintenance information:2023.6.4 operation confirmed
Accessories: saran net
Main specifications: 3-way/3-speaker sealed system, bookshelf type, anti-magnetic type, playback frequency band 45 Hz to 20,000 Hz, crossover frequency/2,000 Hz/10,000 Hz (12 dB/oct), output sound pressure level, 91 dB/W/m, impedance 6 ohms, W312 x H530 x D275 mm 14.0 kg
*Currently on sale. A miniature version of the masterpiece speaker NS-1000M. A small speaker system developed for theater sound. The bright, sharp sound quality is attractive. Paint stains on the front part of the right channel and slight peeling of the veneer on the bottom (Murakoshi Yoichi)
Maintenance information: 2023.6.5 sound output confirmation
Accessories: saran net
Main specifications: 3-way sealed (anti-magnetic) 6Ω playback frequency band 70 Hz to 24 kHz W150 x H275 x D180 mm 3.0 kg
Maintained! The A-2000 is equipped with Yamaha's own RICHNESS circuit. Settings can be made by switching between speakers, such as the company's NS-2000 and 1000M. The low frequencies with a rich sense of scale and the transparent tone typical of Yamaha are attractive, and the luxurious structure typical of the bubble period is directly linked to the sound. As for the exterior, there are abrasions on the top surface and sidewood (Murakoshi Yoichi)
Maintenance information: 2023.6.14 maintenance (replacement of defective parts in the left and right main amplifier circuits, circuit board soldering all fixes. PHONO SELECTOR SWITCH RECOUT SWITCH DISASSEMBLY CONTACT POLISHING CONTACT CLEANER APPLICATION Switch and volume classification contact correction. I/O pin jack polish.)
Accessories: none
Main specifications: 130W+130W (8Ω) richness circuit frequency characteristics 5Hz to 100kHz W473 x H169 x D464mm 26 kg
Head shell for Yamaha's record player GT-1000. Colors of the same quality as the arms match well. Overhang can be finely adjusted by adjusting the side screw with a hexagonal wrench (Murakoshi Yoichi)
Maintenance information: 2023.6.3 Confirmation confirmed
Accessories: none
Main specifications: own weight 14g
It is a stylish SACD player with a design panel inspired by the famous CA-1000 and CA-2000 machines of yesteryear. With outstanding transparency, thick mids, and sharp sound quality, it is particularly convincing for piano expression in SACD. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2023.5.31 sound output confirmed
Accessories: remote control, instruction manual, original box
Main specifications: 2 digital output systems (optical/coaxial) analog output 1 system (RCA) SACD for media music playback, CD, CD-R/RW (MP3, WMA playback possible) W435 x H137 x D440 mm 15 kg
Head shell for Yamaha's record player GT-1000. Colors of the same quality as the arms match well. Overhang can be finely adjusted by adjusting the side screw with a hexagonal wrench (Murakoshi Yoichi)
Maintenance Information: 2023.5.30 Confirmation Confirmed
Accessories: none
Main specifications: own weight 14g