This is a set of 4 AET y rugs. Surface treatment is performed using plating with a content of 99% or more of precious metals (Murakoshi Yoichi)
Accessories: none
Main specifications: width 12 mm, length 23.5 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi)
Accessories: none
Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ/7 kΩ secondary: 4/8/16 Ω W56 x D50 x H80 mm 0.79 kg/piece with original box (Kojima Yosuke)
Accessories: original box
A passive attenuator that uses DALE NS-2B, a non-inductive wire winding resistor. The input impedance is 10 kΩ, and the maximum attenuation is possible to approximately -58 dB. The 23-contact VOL can be attenuated at approximately -2.5 dB. It has a careful finish that focuses on solid aluminum knobs, internal wiring, and even each part. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: W112 x H68 x D155 mm (including knob terminals)
Digital cable, 1.0 m, 110 ohm, AES/EBU standard, a combination of reliable Belden and Neutrik. The high cost performance is outstanding. (FUJISAWA KOSHI)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: No accessories
USB-A to B terminal conductors are 1.25% silver coated. Silver coating ensures signal transmission performance. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Sound Magic horizontal 2-tier rack. Uses 38mm diameter struts and high-compression, high-mass 19mm thick special MDF. A circular cut is applied to the back to make the cables easier to put together. The exterior has bumps, dirt, threads, etc. ※Shipping costs will be estimated separately (Fujisawa Yukishi)
Accessories: spike, spike base
Main specifications: W1,138 x H476 x D501 mm weight 28 kg load capacity 80 kg/shelf
Power transformer hammer tone color primary: 100V/FUSE1A secondary: 280-250-0-250-280V/AC0.12A 5-6.3V/2A 6.3V/1.5A x 2 W85 x H76 x D71 mm approx. 2.3 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Pair tube EL34 compatible sphere made in Japan black plate measured value 54/54 (rejected value 30) with white box, the printing design is different on the left and right, but the internal structure is the same ※Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Digital cable, 1.0m, RCA terminal, zero crystal silver conductor, has good sound accuracy for faint sounds, and is characterized by a steady sound. It is a cable that can be obtained at a relatively low price among the company's cables, which have many high price ranges (Kojima Yosuke)
Accessories: none
Pair tube EL34 compatible ball, black plate, made in Japan, measured value 54/54 (rejected value 30) with original box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Power transformer hammer tone color primary: 100V/FUSE1A secondary: 280-250-0-250-280V/AC0.12A 5-6.3V/2A 6.3V/1.5A x 2 W85 x H76 x D71 mm approx. 2.3 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Power transformer primary: 90-100-110V secondary: CT-6.3V/1.2A, 5V/2A, 6.3V/2A, CT-6.3V/1.2A, 250-220-0-220-250V/DC130mA W85 × H68 × D71 mm approx. 1.8 kg (actual measurement, not including protrusions) with original box (with writing on the box) (Kojima Yosuke)
Accessories: original box
The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The Fostex 20cm double woofer enclosure D-70 is a plywood cut service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in stereo magazines at the time, and this is not a genuine assembly kit. There is no difference in dimensions or material. Wiring, SP terminals, detailed instructions, etc. are not included. If you can understand it, and if you are a self-made person, how about DIY this summer!? *The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications:20cm Backload Enclosure for Double Woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight approx. 93.6 kg
The price has been reduced! 2024/4/28 sales price 9,800 yen*Inexpensive because the cantilever is slightly leaning to the left. The first stereo cartridge in the Empire lineup. The sound is perfect for the 6th to 70s editions where you can feel the core clearly (Yamato Yuki)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
Maintained! A power amplifier with a characteristic large meter. A straightforward tone with no peculiarities. There is momentum unique to the 80s, and you can enjoy crisp sound quality. It is also ideal as an introduction to separate amplifiers. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.14 maintained (output relay, meter relay replacement, indicator lamp replacement, meter lamp replacement, volume replacement, operational amplifier replacement, solder repair, interior and exterior inspection and cleaning, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) 170W+170W (4Ω) frequency characteristics 1Hz to 100kHz impedance 4Ω to 16Ω W450 × H174 × D422mm 18.5 kg
Refresh yourself with internal and external maintenance! This is an attractive mid-size model with the large 38cm HPD385 unit pressed into a compact enclosure. It has good phase characteristics and plays classical music and vocals in a pleasant tone with a high texture and a good, moist tone (Mizusaki Ryo)
Maintenance information: 2024.5.11 Maintained (exterior repair/cleaning
unit assembly)
2019.12.30 Maintained (input terminal rust removal (pickling) treatment, cleaning. Internal connection terminal (faston) replaced with a new one. Output terminal polish cleaning. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Exterior repair/polishing/oil finish. Front and rear baffle/hakama paint Saran net replacement. Unit maintenance (low range side: edge exchange, magnetic circuit gap cleaning center adjustment, high range side: magnetic circuit gap cleaning center adjustment) unit detachment)
Accessories: none
Main specifications: coaxial 2-way speaker, front bass reflex system, 8Ω, 91 dB, W540 x H840 x D310 mm, 32 kg
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. The exterior has scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/6 sales price 29,800 yen 6 month guarantee. Fourth generation model of Victor's masterpiece speaker SX-500 series representing the 90s. Alnico magnets are used in all units, and the woofer unit has particularly excellent low-level reproducibility, contributing to improved clarity and good tone during quiet sounds. The exterior has scratches and dullness over time. Serial 10800021 (Yamato Yuki)
Maintenance information: 2024.5.6 sweep test is good
Accessories: none
Main specifications: 2 way, 2 speakers, sealed system, bookshelf type, anti-magnetic type, 20 cm cone type for low range/3.5 cm dome type impedance 6 Ω for high range, output sound pressure level 90 dB, W270 x H454 x D 293 mm, weight 12.5 kg/book
The price has been drastically reduced! 2024/5/15 sales price 148,000 yen The X-DP7, which specializes in DACs, has arrived. By inheriting the performance of the X-DP10 and specializing in DACs, a high signal-to-noise ratio has been achieved. It is also DSD compatible, and it is a high quality car with excellent cost performance. There are no noticeable scratches on the exterior. Serial R10939 (Tamura Eiji)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: digital input: USB x 1, OPTICAL x 2, COAXIAL x 2, AES/EBU x 1, CLOCK x 1 analog input: RCA x 2, XLR x 2 analog output: RCA x 1, XLR x 1 PCM: 24, 32 bit/44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768 kHz DSD: 2.8224, 5.6448, 11.2896 MHz (DoP, (Compatible with ASIO 2.2) W420 x H68 x D320 mm weight 5.9 kg
The price has been drastically reduced! 2024/5/15 sales price 198,000 yen 800 Diamond series center speaker It is well connected to the Diamond Series due to unit groups that have evolved further from the previous game. High quality mid-range is reproduced. It is a cheap character that can be combined with other speakers for the center. There are thin threads on the exterior. Serial 12120002808 (Yonejima Satoshi)
Maintenance information: 2024.5.15 sweep test good
Accessories: jumper cable
Main specifications: 2-way bass reflex drive unit 25mm diamond dome tweeter x 1, 165mm Woben Kevlar cone FST mid woofer x 1 playback frequency band 42Hz to 33kHz output sound pressure level 88dB nominal impedance 8Ω W486 x H279 x D287 mm weight 12.5 kg
The price has been reduced! 2024/5/8 sales price 45,000 yen ※Pedestal is out of stock. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator test is good
Accessories: instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
The price has been reduced! 2024/5/11 sales price 6,500 yen RCA cable 1.0 m pair 6N+5N hybrid 2-core (twin) W shield. It consists of 4 types of high purity (PC-OCC+ pure silver coated OFC). The range is wide and the sound quality is well-balanced. In addition to being dull on the exterior, there is a feeling of use, such as having a habit (Hiroki Aso)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/5/13 Tall Boy with a sales price of 148,000 yen. The woofer uses a wood fiber cone, and the tweeter is equipped with a 28mm dome tweeter and ribbon tweeter. In addition to the conventional mid-high range with a high texture, we have acquired a new low range where you can feel the high response. Serial 1917336 (Murakoshi Yoichi)
Maintenance information: 2024.5.13 sound output confirmed
Accessories: saran net, jumper cable, spikes, metal fittings
Main specifications: 3 way 4 speakers bass reflex type frequency characteristics 49 Hz to 32 kHz efficiency 89 dB impedance 4 ohms W195 x H001 x D330 mm weight 18.9 kg
The Luxman selected tube set 12AX7 x 3/12 AU7 x 5 (with LUXMAN logo) 12AX7 is a GE print with the same structure as Siemens from the same period made in Yugoslavia, and the 12AU7 is a high-reliability type (6189) measuring instrument made by GE and seems to be an unused item due to the state of the tube measured by the TV-7 measuring instrument TV-7 made by GE! (KOJIMA Yosuke)
Accessories: original box, warranty card
MQ-360 vacuum tube set Lux selected product 6550A x 4, 12AU7 x 2, and 6FQ7 x 2 configurations 6550A is made by GE, 1 12AU7 is made in Yugoslavia, the other is a GE black plate specification, and the 6FQ7 all seem to be made by GE, and the printing is peeling due to aging, but it seems that it is an unused item due to tube condition! Both spheres have already been measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box, warranty card
There was no problem with the sound output, but it's cheap because the woofer center caps are dented on both sides. Comes with a genuine stand! 77XG series bookshelf Equipped with a P.P.D.D. woofer using a glass fiber cone and a super tweeter that can play up to 120 kHz, the clean and clear sound is attractive (Sasaki Shota)
Maintenance information: 2024.5.16 sweep test good
Accessories: genuine stand
Main specifications: 3-way 3-speaker bass reflex type anti-magnetic design frequency band 40Hz to 120kHz impedance 6Ω sound pressure level 88dB dimensions W210 x H360 x D273 mm weight 6.7 kg/book
Granite speaker stand by Ishizo Unkei. It has been mirrored and has a careful finish. It contributes to damping the vibration and tightening of the sound of small speakers (Ryo Mizusaki)
Accessories: none
Main specifications: top plate W160 x D220 mm bottom surface W220 x D270 mm height 605 mm weight 17.3 kg
※The spikes are out of stock, so it's cheap. A perfectly sized round top plate is used for B&W's “805 Series”. This speaker stand is made of lightweight magnesium alloy with a high vibration absorption rate (Shota Sasaki)
Accessories: none
Main specifications: top plate W226 x D304 mm bottom plate W238 x D317 mm height 600 mm weight 14 kg
Speaker cable, 1.9 m pair, sold out type, untreated ends, Acrolink 6N series, which is natural and has no habit. At first glance, it's no different from the S1000/2, but the sheath diameter is one size larger and the conductor is extremely thick. The sense of transparency, moderate sound pressure, and a flat yet firm, thick sound are attractive. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable can be replaced with a 2.0m pair end banana plug Y lug. Uses G.S. #79nano3のアッパーバージョンとして企画され、導体にPC -OCC speaker cable impregnated with 3 times the concentration of gold/silver colloid liquid in a high sound quality OFC line (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: Y lug
The 0.5m digital RCA cable terminal is a high quality coaxial cable compatible with REAN (NEUTRIK) HDTV Digital Video. This cable is clear and has good cost performance (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: none
Comes with a dedicated shell! A mid-grade model that uses a solid microlinear needle that achieves low distortion. Trace power has increased and frequency characteristics have been improved (Tamura Eiji)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: none
Main specifications: VM type playback frequency 20 to 25,000 Hz needle pressure 1.8 to 2.2 g (2.0 g standard) load resistance 47 kΩ mass 6.1 g
Mark 2600 is famous, and you can't underestimate this either. The power is modest compared to the 2600, but I also like the clear, powerful sound and rugged design. There are dents on the exterior and upper right grill, and a feeling of use can be seen such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: none
Main specifications: 100W+100W (4Ω to 8Ω) W481 x H142 x D246mm 10 kg
Headshell compatible with EMT tonearms. Why don't you install your favorite cartridge and enjoy it (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Accuphase's core preamp. It inherits the design technology of the higher-level model C-2800 and is equipped with AAVA volume control. You can enjoy high transparency and pure sound with fine particles typical of Accuphase. Exterior, small scratches on the INPUT selector dial, scratches on the left corner of the front window, small scratches on the remote control, dullness, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord, original box
Main specifications: 7 line preamp input systems (RCA x 5, XLR x 2), 3 output systems (XLR x 1, RCA x 2) W465 x H150 x D405 mm 16.2 kg
Phono cable 1.2m 5pin-RCA high-purity 6NCU hybrid core wire 7-layer double 2-core shield structure, high quality cable that strongly shuts out induced noise. Comparing various cables as a standard for phono cables is also fun. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: original box
Denon network player. Starting with streaming services and internet radios, you can play back a variety of sound sources, such as music servers (NAS/PC/Mac, etc.) on a local network, sound sources stored on USB memory devices, smartphones, tablets, and Bluetooth devices. Serial BBG36200101300 (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: digital audio input terminal, USB-A input x 1, analog audio output terminal... balanced output x 2, headphone output x 1, digital audio output terminal, optical digital output x 1, others/NETWORK x 1, Wi-Fi/Bluetooth antenna terminal x 2, IR control output x 1 W434 x H107 x D312 mm 3.9 kg
A stabilized power supply that improves sound quality by supplying a stable power source with very little noise to USB devices in place of PC bus power. It plays a part in upgrading the USB data you have (Murakoshi Yoichi)
Maintenance information: 2024.5.11 sound output confirmed
Accessories: AC adapter
Main specifications: AC100V output voltage DC5V maximum current 500mA input terminal Neutrik USB B type connector output terminal high quality USB cable approx. 10 cm+B type plug W97 x H31 x D39 mm
The price has been reduced. 2024/5/3 sales price 27,800 yen This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed)
Accessories: power cable
Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
RCA cable 1.0m pair revision B type signature series There is little dramatization in the tone, but you can enjoy a spectacular sound field feeling as if the speaker size has been larger by one size or more. There is dullness on the plug (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 sales price 129,800 yen Sony 1TB HDD built-in audio player. It reproduces not only high-resolution sound sources such as DSD 5.6 MHz and 192 kHz/24 bits, but also compressed sound sources with high sound quality. If you install the software on your PC or smartphone, you can transfer and operate music data to the HDD. You can also enjoy CDs and MP3s ripped at home with high sound quality. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: remote control, instruction manual (simplified version), power cord, connection cord, original box
Main specifications: High-resolution sound source compatible internal HDD (1TB) playback compatible codec DSDIFF [DSD] /2.8 MHz/5.6 MHz) DSDIFF [DST] DSF/2.8 MHz/5.6 MHz) WAV/maximum 192 Hz/32 bit) AIFF/192 Hz/24 bit) FLAC/192 Hz/24 bit) ALAC/192 Hz/24 bit) WMA · MP3 · AAC · ATRAC (Non DRM) playback frequency Characteristics 2 Hz to 80 kHz audio output (XLR/RCA) EXT terminal (USB type A) W430 x H130 x D390 mm 14.5 kg
Both inside and outside have been maintained! This is an ultra-rare speaker Allegro equipped with Monitor Gold. This bookshelf is almost the same size as a 3LZ. It is an attractive speaker with a beautiful sound unique to Monitor Gold and a mid-low range resolution that is a bit different from 3LZ. It lets me listen to quality that is compatible with everything. Serial SG1515/SG1517 (Yonejima Satoshi)
Maintenance information: 2024.5.12 maintained (saran net reinstallation/resonance prevention measures, unit maintenance: magnetic circuit gap cleaning/center adjustment for both low and high frequencies, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning, 4-pin direct connection modification repair. Exterior repair/polishing/oil finishing, rear baffle repair/painting)
Accessories: No accessories
Main specifications: unit using a coaxial 2-way bass reflex speaker system 12 inch MONITOR GOLD coaxial 2-way playback frequency band 25 Hz to 20 kHz maximum input 15 W input impedance 8 Ω crossover frequency 1 kHz dimensions W380 x H583 x D 240 mm weight 16.2 kg (actual measurement)
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. Kanchireya is slightly to the left. Serial 21536 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 AccuPhase CD player with sales price 148,000 yen. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: remote control, copy of manual
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
Transistors, capacitors, and many other parts have been replaced and refreshed and maintained! It was the highest-grade model at the time and had a vintage sound that overwhelmed the others, and by actively replacing deteriorated parts, the sound, which tends to be cloudy, has become clear, and the original momentum of the sound has been revived. It is particularly compatible with the JBL Lancer series back then. The exterior is dull, but it is in a good category even when viewed from the year it was released (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (capacitor, transistor, heat dissipation sheet, semi-fixed resistor, fuse replacement. SP terminal created. Various SW/VR internal cleaning. Clean each board contact. Solder again after removing the old solder. Internal and external cleaning, idle DC offset adjustment. (Audio output tested for various inputs and all SP terminals)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) frequency characteristics 5Hz to 100kHz tone control/bass, midrange, treble 3-stage adjustment W462 x H155 x D316 mm 17.5 kg
It's early plastic shell, but the interior has been replaced with a new one. The rich, rich SPU-like sound is attractive. The built-in transformer gives the impression that transparency and clarity have been improved. The exterior is broken into the plastic cover, and there is a feeling of use such as dullness. Serial 624056 (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: original box
Main specifications: MC type with built-in transformer, output 10 mV, needle pressure 3 to 4.5 g, dead weight 32 g