Accuphase power amplifier that achieved a damping factor of 700. It is an AB class stereo power amplifier that has greatly improved the performance and sound quality of the previous model, and it has both strength and subtlety, and seems to be compatible with various music scenes. The condition is generally good. Serial J2Y583 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 90W+90W (8Ω) 180W+180W (4Ω) load impedance 2 to 16Ω (in stereo) damping factor 700 (in stereo) input RCA1 system, XLR1 system, speaker output 2 systems dimensions W465 x H190 x D427 mm weight 29.2 kg
RCA cable, 1.0 m pair, is the standard OFC series cable with thick gold plating, and is the company's standard cable with excellent corrosion resistance. The appeal is that it suppresses dramatization specific to cables and does not impair the individuality of amplifiers and players (Hiroki Aso)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
Maintained! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The exterior has a feeling of use such as dullness and small scratches. Serial 44A12 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (main volume A curve replaced with the original vacuum tube 12AX7 noise replacement oil capacitor 0.01 μF domestically manufactured in the USA) replacement block capacitor 40/20/20/1000 μF other defective and deterioration replacement electrolytic capacitor 1000 μF additional electrolytic capacitor 40 μF other deterioration replacement switching noise reduction measures 1/4 W additional resistance 1/2 W deterioration replacement short (Additional pin vacuum tube socket, RCA jack caulk repair, and other operation checked with AC 100 to 117 V)
Accessories: A copy of the English instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Fidelity-Research headshell Lightweight and highly rigid. It is characterized by an enveloping shape with a thick aluminum press-processed body. There are dullness and small scratches on the exterior (Murakoshi Yoichi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 10g
RCA cable, 0.5 m pair, solid PSC+ copper conductor, cable with a large sound field and excellent sense of sound separation. It is a model with extremely excellent cost performance among the company's line cables (Murakoshi Yoichi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: original box
The price has been reduced. 2024/5/19 sales price 148,000 yen A typical woofer attached to first-class products such as Exclusive2402 and Westlake Audio. It is a highly stable model that can withstand professional use. The response speed is fast and the sound that makes it stand up well is attractive. There is a light stain on the corn paper (Murakoshi Yoichi)
Maintenance information: 2024.5.17 sound output confirmed
Accessories: none
Main specifications: 40cm cone woofer frequency characteristics 28 Hz to 1000 Hz 8 ohms (measured 7.9 ohms) output sound pressure level 97 dB dimensions diameter 400 mm x depth 167 mm 11 kg/1
Choke transformer hammer tone color 10H/130mA DC resistance 65/65Ω (actual measurement 61.8/61.9Ω) W50 x H82 x D56 mm 0.8 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
RCA cable 1.0 m pair has a calm sound and a unique thick air feel The LR coloring of the WBT plug and plug with WBT-0144 has deteriorated and there are cracks (Kojima Yosuke)
Accessories: none
Comes with a glass base An all-in-one model that uses waveguide speaker technology to achieve an immersive and powerful sound like you would experience in a concert hall. In addition to CDs and FM/AM radios, you can wirelessly play music stored on your smartphone or tablet such as an iPad. Using your home Wi-Fi network, you can enjoy internet radio from around the world with just one touch. Operation and installation are simple and easy. It is in good condition (Oikawa Tetsuji)
Maintenance information: 2024.5.19 Operation confirmed (CD playback, remote control OK)
Accessories: remote control, instruction manual, power cable, FM antenna, glass base
Main Specifications: Wireless LAN: IEEE 802.11b/g/n Network Playback Sound Format: MP3, WMA, AAC, FLAC, Apple Lossless External Dimensions W368xH142xD221mm Weight 4.5 kg
A consumer model tweeter unit used in the L300. Compared to the 2405 aluminum diffuser, this model of acrylic diffuser has a sweet and clear JBL sound. It is a character that blends in naturally without compromising the taste of the company's system. The exterior has rust and yellowing over time. Serial 13326/107093 (Yonejima Satoshi)
Maintenance information: 2024.5.19 oscillator test good
Accessories: No accessories
Main specifications: Alnico magnet, 8 ohms, allowable input, 20 W, frequency characteristics, 6,500 Hz to 21,500 Hz, crossover, 6,500 Hz, sound pressure level, 105 dB, diameter: 98 mm, depth: 83 mm, 2.3 kg/unit
*Currently sold. Technics 5cm horn tweeter Uses titanium diaphragms and die-cast aluminum horns. The sound quality is bright and hard with good sharpness. There are scratches and oxidation on the exterior (Yonejima Satoshi)
Maintenance information: 2024.5.19 oscillator test is good
Accessories: No accessories
Main specifications: horn type playback frequency 3,000 to 25,000 Hz W70 x H70 x D60 mm 0.35 kg
The SINTRA series, which is Lloyd's hidden masterpiece, and the rare SINTRA IMPROVED have arrived. Using a dome tweeter jointly developed with SCAN SPEAK, a uniquely designed bass reflex port reproduces clear sound with reduced resonance. The sound absorbing material around the tweeter is peeling off, there are small scratches, and dents (Daiki Goto)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: original box
Main specifications: 2 way 2 speakers, 8 ohms, W305 x H203 x D190 mm, weight 7.8 kg (actual measurement)
Maintained by the manufacturer! It is inexpensive because it has 230V specifications. Please use the included step-up transformer. The sound with a firm outline and no hesitation is unique to VRDS. The freshness of the sound and the straight sound image are advantages that cannot be obtained on CDs in recent years (Sasaki Shota)
Maintenance information: 2024.5.18 Maintained by the manufacturer (The function switch has been replaced. Gears and belts have been replaced. Each part has been inspected and adjusted)
Accessories: remote control, manual, power cable, original box, step-up transformer, insulator
Main specifications: 20-bit DAC dimensions W442 x H145 (153 mm when using foot) x D344 mm weight 16.5 kg
Genuine RF Enterprise with side panels Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a thick, supple sound reminiscent of a record, and the intensity of the mid-range is outstanding among many CD players. There are no visible scratches on the exterior, etc., and it can be said that it is good over time (Kobayashi Hitoshi)
Maintenance information: 2014.6.12 maintained (back UP battery fluid leak, poor insulation → battery removal, insulation treatment, supercapacitor replacement, other analog part bypass C, coupling C replacement, front button all dismantling, contact all polishing, operation check)
Accessories: instruction manual, power cord
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
Scarce! Vintage join Made In GDR (former East Germany) 20cm full range speaker. I immediately rang it at the storefront. It's an old full range speaker, so to be honest, the high and low frequencies don't come out at all compared to modern speakers, but the old piano trio is a perfect match and the mid-range is rich. The speaker has an attractive, soft, and deafening sound without making a harsh sound. There are scratches on the corner of the cabinet, and there are small scratches and line scratches overall (Sasaki Shota)
Maintenance information: 2024.5.18 Sound output operation confirmed
Accessories: none
Main specifications: 20cm full range 5Ω W315 x H525 x D210 mm 9.1 kg (actual measurement)
※Since the terminal is broken in one place, it is inexpensive. Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. There are scratches and dullness on the exterior. Serial 121-1 G1 (Satoshi Yonejima)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
5cm full range enclosure It's a backroad type and small, perfect size for those who want to play. It seems to be useful for desktops, etc. There are stains and bumps on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: baffle hole diameter φ54 mm W127 x H154 x D170 mm weight 1.0 kg/1 bottle
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2509-1G2 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
It is a DIGIMASTER X64.4 linked to the famous 2000SH4 series. The thick, elastic sound unique to WADIA's heyday is attractive. It is a high-end aircraft of the time with high musicality, and also has intense colors. The exterior is dull. The exterior has scratches, etc. Genuine AXISS Serial 1 2011-90 (Yonejima Satoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: copy of instruction manual, power cable, connection cord
Main Specifications: Sledgehammer Buffer Drive Resampling Rate 64X Resolution 18 Bits CPU Power 72 MIPS Sampling Frequency 32/44.1/48kHz Input: 2 Coaxial (BNC) Systems, 2 Optical Systems Output: 1 Unbalanced (RCA) System, 1 Balance (XLR) System W486 x H89 x D381 mm Weight 12 kg
Maintained by the manufacturer. It has an aspect as an entry model, but it is a model where you can fully enjoy the uniqueness of Accuphase. In addition to the wide range, it is supple and has a slight sex appeal, so you can enjoy it for 12 minutes. A powerful unit that sounds regardless of whether it is a large or medium speaker. In addition to conspicuous marks on the exterior and top plate, a feeling of use such as dullness, stains, and threads can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.17 manufacturer maintenance (push switch, volume, etc., cleaning, parts replacement, decorative plate installation, inspection of each part, adjustment, safety check, pressure resistance check)
Accessories: power cable, remote control, manual
Main specifications: 100W+100W (8Ω) parallel push-pull output stage current feedback amplifier circuit W475×H170×D424mm 21.4 kg
RCA cable, 1.0 m pair, PCOCC conductor, it is a clear, well-contoured sound typical of Audio-Technica. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
Piezoelectric film super tweeter. With ultra-high frequency playback up to 120 kHz, I get the impression that you can hear the ultra-high range, realism, and even breathing. The exterior has a feeling of use such as dullness and small scratches (Tomoho Asaine)
Maintenance information: 2021.4.22 operation confirmed
Accessories: instruction manual, connection cable, AC adapter adjustment CD
Main specifications: Tweeter part: W125 x H88 x D93 mm body: W120 x H60 x D260 mm
This is a set of 4 AET y rugs. Surface treatment is performed using plating with a content of 99% or more of precious metals (Murakoshi Yoichi)
Accessories: none
Main specifications: width 12 mm, length 23.5 mm
ELAC's classic MM cartridges. The tone spun out of the gold body is a firm tone, and you can enjoy the subtle high frequencies and the warm MM-like thickness (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: mm type output 5.5 mV playback frequency band 10 Hz to 25,000 Hz needle pressure 0.75 to 1.5 g dead weight 6.5 g
Unfortunately, production of the 4312 monitor is a miniature bookshelf speaker. It is a speaker with dry low frequencies, sharp high frequencies, and a compact yet comfortable speaker that can be played energetically like a JBL. The exterior has dullness and slight sunburn on the back corner. Serial FY0009-008869, FY0009-008870 (Murakoshi Yoichi)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: saran net
Main specifications: 3-way bass reflex system bookshelf frequency characteristics 55 Hz to 50 kHz crossover 7 kHz, 12 kHz impedance 6 ohms output sound pressure level 90 dB W181 x H300 x D180 mm 4.0 kg
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ/7 kΩ secondary: 4/8/16 Ω W56 x D50 x H80 mm 0.79 kg/piece with original box (Kojima Yosuke)
Accessories: original box
A passive attenuator that uses DALE NS-2B, a non-inductive wire winding resistor. The input impedance is 10 kΩ, and the maximum attenuation is possible to approximately -58 dB. The 23-contact VOL can be attenuated at approximately -2.5 dB. It has a careful finish that focuses on solid aluminum knobs, internal wiring, and even each part. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: W112 x H68 x D155 mm (including knob terminals)
Digital cable, 1.0 m, 110 ohm, AES/EBU standard, a combination of reliable Belden and Neutrik. The high cost performance is outstanding. (FUJISAWA KOSHI)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: No accessories
USB-A to B terminal conductors are 1.25% silver coated. Silver coating ensures signal transmission performance. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Sound Magic horizontal 2-tier rack. Uses 38mm diameter struts and high-compression, high-mass 19mm thick special MDF. A circular cut is applied to the back to make the cables easier to put together. The exterior has bumps, dirt, threads, etc. ※Shipping costs will be estimated separately (Fujisawa Yukishi)
Accessories: spike, spike base
Main specifications: W1,138 x H476 x D501 mm weight 28 kg load capacity 80 kg/shelf
Power transformer hammer tone color primary: 100V/FUSE1A secondary: 280-250-0-250-280V/AC0.12A 5-6.3V/2A 6.3V/1.5A x 2 W85 x H76 x D71 mm approx. 2.3 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Pair tube EL34 compatible sphere made in Japan black plate measured value 54/54 (rejected value 30) with white box, the printing design is different on the left and right, but the internal structure is the same ※Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Digital cable, 1.0m, RCA terminal, zero crystal silver conductor, has good sound accuracy for faint sounds, and is characterized by a steady sound. It is a cable that can be obtained at a relatively low price among the company's cables, which have many high price ranges (Kojima Yosuke)
Accessories: none
Pair tube EL34 compatible ball, black plate, made in Japan, measured value 54/54 (rejected value 30) with original box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Power transformer hammer tone color primary: 100V/FUSE1A secondary: 280-250-0-250-280V/AC0.12A 5-6.3V/2A 6.3V/1.5A x 2 W85 x H76 x D71 mm approx. 2.3 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Power transformer primary: 90-100-110V secondary: CT-6.3V/1.2A, 5V/2A, 6.3V/2A, CT-6.3V/1.2A, 250-220-0-220-250V/DC130mA W85 × H68 × D71 mm approx. 1.8 kg (actual measurement, not including protrusions) with original box (with writing on the box) (Kojima Yosuke)
Accessories: original box
The Luxman selected tube set 12AX7 x 3/12 AU7 x 5 (with LUXMAN logo) 12AX7 is a GE print with the same structure as Siemens from the same period made in Yugoslavia, and the 12AU7 is a high-reliability type (6189) measuring instrument made by GE and seems to be an unused item due to the state of the tube measured by the TV-7 measuring instrument TV-7 made by GE! (KOJIMA Yosuke)
Accessories: original box, warranty card
MQ-360 vacuum tube set Lux selected product 6550A x 4, 12AU7 x 2, and 6FQ7 x 2 configurations 6550A is made by GE, 1 12AU7 is made in Yugoslavia, the other is a GE black plate specification, and the 6FQ7 all seem to be made by GE, and the printing is peeling due to aging, but it seems that it is an unused item due to tube condition! Both spheres have already been measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box, warranty card
There was no problem with the sound output, but it's cheap because the woofer center caps are dented on both sides. Comes with a genuine stand! 77XG series bookshelf Equipped with a P.P.D.D. woofer using a glass fiber cone and a super tweeter that can play up to 120 kHz, the clean and clear sound is attractive (Sasaki Shota)
Maintenance information: 2024.5.16 sweep test good
Accessories: genuine stand
Main specifications: 3-way 3-speaker bass reflex type anti-magnetic design frequency band 40Hz to 120kHz impedance 6Ω sound pressure level 88dB dimensions W210 x H360 x D273 mm weight 6.7 kg/book
Granite speaker stand by Ishizo Unkei. It has been mirrored and has a careful finish. It contributes to damping the vibration and tightening of the sound of small speakers (Ryo Mizusaki)
Accessories: none
Main specifications: top plate W160 x D220 mm bottom surface W220 x D270 mm height 605 mm weight 17.3 kg
※The spikes are out of stock, so it's cheap. A perfectly sized round top plate is used for B&W's “805 Series”. This speaker stand is made of lightweight magnesium alloy with a high vibration absorption rate (Shota Sasaki)
Accessories: none
Main specifications: top plate W226 x D304 mm bottom plate W238 x D317 mm height 600 mm weight 14 kg
Speaker cable, 1.9 m pair, sold out type, untreated ends, Acrolink 6N series, which is natural and has no habit. At first glance, it's no different from the S1000/2, but the sheath diameter is one size larger and the conductor is extremely thick. The sense of transparency, moderate sound pressure, and a flat yet firm, thick sound are attractive. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable can be replaced with a 2.0m pair end banana plug Y lug. Uses G.S. #79nano3のアッパーバージョンとして企画され、導体にPC -OCC speaker cable impregnated with 3 times the concentration of gold/silver colloid liquid in a high sound quality OFC line (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: Y lug
The 0.5m digital RCA cable terminal is a high quality coaxial cable compatible with REAN (NEUTRIK) HDTV Digital Video. This cable is clear and has good cost performance (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: none
Comes with a dedicated shell! A mid-grade model that uses a solid microlinear needle that achieves low distortion. Trace power has increased and frequency characteristics have been improved (Tamura Eiji)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: none
Main specifications: VM type playback frequency 20 to 25,000 Hz needle pressure 1.8 to 2.2 g (2.0 g standard) load resistance 47 kΩ mass 6.1 g
The price has been drastically reduced! 2023/5/16 sales price 118,000 yen with LS STAND 70 (list price 48,000 yen). This model won the Audio Famous Equipment Award 2005 Speaker System Small Category Award. An excellent balance between the robustness of the enclosure and the suppleness of the unit group. A practical model with attractive spatial expressiveness and accurate sound images that don't make you aware of the presence of a speaker. There are scratches and bumps on the exterior. Serial 37038E002557/37038E002558 (Yonejima Satoshi)
Maintenance information: 2024.5.15 sweep test good
Accessories: instruction manual saran net spike fixing screw
Main specifications: 2-way bass reflex woofer 115mm aluminum hybrid cone tweeter JETIII crossover frequency 3,000 Hz input rating 70W/maximum 90W frequency characteristics 42-50,000 Hz efficiency 86dB impedance 4Ω dimensions W123 x H208 x D282 mm (when grille attached) weight 6.5 kg LS STAND 70: H700 x W240 x D290 mm top plate W75 × D210mm weight 6kg/set
Mark 2600 is famous, and you can't underestimate this either. The power is modest compared to the 2600, but I also like the clear, powerful sound and rugged design. There are dents on the exterior and upper right grill, and a feeling of use can be seen such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: none
Main specifications: 100W+100W (4Ω to 8Ω) W481 x H142 x D246mm 10 kg
GT SONIC's compact ultrasonic cleaner for commercial use. It's not for audio only, but it seems that it can be used for quite a variety of purposes. I think the size is good too. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cord, original box
Main specifications: ultrasonic power consumption 150 W power supply AC 100-120 V 50/60 Hz ultrasonic frequency 40,000 Hz cleaning tank size: W155 x H150 x D300 mm body size: 180 x 310 x 330 mm 5.9 kg
Headshell compatible with EMT tonearms. Why don't you install your favorite cartridge and enjoy it (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: dead weight 9g