Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, square peeling, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
If you are looking for an AV switch selector, 4 ports, 4 inputs, 1 output, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 continuity confirmed
Accessories: instruction manual, original box
Main specifications: W136 x H43 x D88 mm 231 g (actual measurement)
The screw terminal block comes with a 4-pole cover, which is useful for extending and distributing speaker cables. The exterior is dull and there is a feeling of use such as writing (Tomoho Asaine)
Maintenance information: 2024.5.7 continuity confirmed
Main specifications: size W70 x H21 x D34 mm
LUXMAN's discrete premium line selector. You can select sources for up to 4 models. High-rigidity aluminum material is used for the housing, and 6N (99.99997% copper) wire with little information loss is used as the wiring material. The exterior is in good condition with no conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.6 continuity confirmed
Accessories: instruction manual
Main specifications: 6N copper wire, gold-plated internal wiring, 4 systems can be switched, W370 x H71 x D136 mm, 2.4 kg
Convenient digital needle pressure gauge. It is an excellent product that can measure up to 5g with a high accuracy of 0.01 g. (FUJISAWA KOSHI)
Maintenance information: 2024.5.6 operation confirmed
Accessories: No accessories
Main specifications: 5g dead weight
Cartridge case that can hold 2 bottles per shell with cartridges attached (model number unknown). The back case includes an overhang gauge and flathead screwdriver. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: screwdriver, overhang gauge
Main specifications: W130 x H100 x D50 mm 20.3 g (actual measurement)
Unspecified set of 7 insulators It is manufactured with materials thought to be pottery, but details are unknown. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 78 mm in diameter, 22 mm in height, 283 g
※The power has been turned on, but since there are no connected devices, the details have not been checked. Dedicated linear power supplies for the company's D50s+A50, DX3 Pro, etc. Since it is an ultra-low noise design, the frame is also made of hard aluminum blocks and has a high texture. If you've been looking for one, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: power input 115V/230V (50/60Hz) W110×H52×D110mm 0.88kg
※It is inexpensive because there are stains and scratches. Set of 8 DIATONE wooden block ACOUSTIC CUBE DK-5000. The dense composite material has an attractive natural sound. It can be used in a variety of ways, from medium to large speakers. The exterior is stained, scratched, etc. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W90 x H90 x D90 mm, weight approx. 360 g/piece
Stereo magazine appendix. By plugging it into the USB terminal of a PC or USB-compatible DAC, etc., USB power supply/signal noise is cut and sound quality is improved (Satoshi Yonejima)
Maintenance information: 2024.5.5 operation confirmed
Accessories: No accessories
Main specifications: W20×H12×D59mm 13g
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Mini plug to standard jack plug adapter Useful for connecting headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: original box
Set of 4 Technica cable terminator. OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Set of 4 stainless steel spike holders It is also useful for improving sound quality by firmly grasping the spike-shaped legs. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: stainless steel, diameter 35 x height 5 mm, approx. 39.5 g
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
Set of 4 unspecified metal type short pins The center pin is detachable and can also be used as an output terminal. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
※It has a cigarette smell, so it's cheap. Set of 4 WOOD BLOCK INSULATOR MADE BY CORAL. It is built with a sense of stability and can be used with a wide range of speakers from medium to large. The exterior is dirty, scratched, etc. ※Felt is attached to the top plate (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W100×H190×D390mm 5.2 kg/bottle
PSE standard product. Recommended parts for those looking for a high quality slim connector. It is a neutral character with no quirks. There are abrasions ※ cord bushing is missing (Tomoho Asaine)
Accessories: none
Main specifications: maximum diameter standard 8.5 mm/maximum 13.0 mm (when cord bushing is removed)
The company's SONICA DAC remote control unit*Please check the manufacturer's website for operating environments, etc. (https://www.oppodigital.jp/discontinued-product/sonica-dac/)(及川 Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
※Cleaning solution is not included. VPI's classic vacuum record cleaner. Attach the record to the turntable, apply cleaner liquid, clean it with a brush, and then use a vacuum method to strongly suck fine dust and dirt that has entered the disc's groove. There is a dent in the corner
Maintenance information: 2024.5.3 operation confirmed (rotation, vacuum OK)
Accessories: instruction manual, power cable
Main specifications: W394 x H235 x D362 mm 12.7 kg
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
Set of 4 Caldas jumper plates It is machined copper. There is an abrasion on the lug part (Murakoshi Yoichi)
Accessories: none
Main specifications: length from lug center to lug center: 37mm; lug inner diameter: 6mm
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
A set of 4 small mini pottery blocks made by Noritake, famous for its high-grade tableware. Compared to TAOC, etc., the impression is that the sound is gentle. The exterior has stains like tape marks on one side, dullness, and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: 80 x 100 x 200 mm
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. The exterior has line scratches and tape marks on the bottom (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W450 x D500 x H40 mm approx. 7 kg
The 2 shelves are missing and the dowels are missing and cannot be set. A horizontal AV rack designed with heat dissipation and wiring work in mind. Large TVs can be installed. Up to 6 amplifiers, devices, etc. can be stored. You can see the exterior, overall dullness, large abrasions, etc. (Kobayashi Hitoshi)
Accessories: 2 shelves (no missing dowels in the set)
Main specifications: W1202 x H732 x D582 mm load capacity/overall/top plate/shelf board/bottom plate 300/150/50/150 kg mass 83 kg
Jumper wire 18mm (High), 14mm (Low) pair end Y lug specification Caldas tri-wire jumper cable. The model number is unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Continuity confirmed
Accessories: none
Strong casters are used, making it convenient to move heavy equipment and large speakers. In addition to peeling veneer on the exterior and sides, a feeling of use can be seen such as dullness, scratches, and abrasions (Kobayashi Hitoshi)
Accessories: none
Main specifications: W626 x H126 x D570 mm 14 kg
Speaker stand for YAMAHA NS-05 and NS-1 Perfect for other companies' small speakers (Takasaki Atsushi)
Accessories: none
Main Specifications: Speaker Stand External Dimensions W250 ✕ H385 ✕ D330 mm Weight 4.0 kg
※It is cheap because it is out of stock and is a spike replacement. A speaker stand that fits the top plate perfectly with JBL's signature speakers 4312, 4425, and 4428 series. Control the sound by filling the pillars with cast iron powder. The sound is like a control monitor with a sharp focus. The exterior has strokes and bruises (Tamura Eiji)
Accessories: spikes (replacement)
Main specifications: top plate W360 x D293 mm bottom plate W440 x H334 x D370 mm (actual measurement) weight 29 kg/bottle
The price has been reduced. 2024/4/29 sales price 45,000 yen Luxman high quality speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Heavyweight marble board Perfect as a speaker base or as a base for mono power amplifiers. The surface is polished, and the sides and back are not as smooth as the front. On the exterior, you can see a small chip on the back corner (Oikawa Tetsuji)
Accessories: none
Main specifications: Size: W400 x D500 x H50 mm 24.8 kg
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2222-5M2B (Fujisawa Yukishi)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
The price has been reduced. 2024/4/29 sales price 9,000 yen. ※Unused item. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low frequencies clear, and accurate sound images can be obtained (Hiura Katsuji)
Accessories: original box
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. The exterior has scuffs, dullness, and a feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W51×H85×D51mm
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
PSE standard product. A 3P5 port power strip made by BELDEN. This is a long-selling model of audio taps. Equipped with a ground terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance Information: 2024.4.27
Accessories: original box
Main specifications: W51×H32×D278mm 0.6 kg
It is an audio selector (passive type) for Real Acoustics Studio. There are 4 input systems and 1 output system. It is an easy-to-use car with VOL. There are line marks on the exterior (Hiura Katsuji)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: instruction manual connection cable original box
Main specifications: W150 x H60 x D120 mm weight 464 g
The price has been reduced. 2024/4/29 sales price 8,000 yen. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. The exterior has scratches, dirt, rust, and a feeling of use (Hiura Katsuji)
Accessories: none
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
The price has been reduced. 2024/4/29 sales price 8,000 yen. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. The exterior has scratches, dirt, rust, and a feeling of use (Hiura Katsuji)
Accessories: none
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
※The felt is attached upside down. Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. Only 1 out of 4 has butyl rubber attached to the inside. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
KRIPTON line transformer. Use it by placing it between the CD player and the control amplifier. It changes smoothly into expressive power, so it is also suitable for long listening. There are some tape marks on the exterior. Serial 0607119 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main specifications: frequency characteristics 10 Hz to 100 kHz W135 x H90 x D126 mm, weight 1.2 kg
Built-in digital input board. Digital music signals from digital devices can be input. Equipped with coaxial and optical fiber input terminals. There is a feeling of use such as dullness. Serial G2Y425 (Takasaki Atsushi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
Main specifications: Sampling frequency 32 kHz to 96 kHz, 24 bit digital input optical, 1 coaxial system, automatic switching between coaxial/optical input, equipped with automatic recognition function for sampling frequency, bit rate, and de-emphasis compatible models C-2000, C-245, CX-260, E-213, E-307, E-308, E-408, E-530, E-550