The disposal price has been reduced. Member prices are not applicable. 2024/4/8 sales price 198,000 yen This is a 2-inch compression driver that is also installed in the company's studio monitor CD-3820. Since the mounting position is common with the JBL 2-inch driver, it is a driver that can be enjoyed not only between GAUSS units, but also with JBL units. There is something like a white stain on the diaphragm (Oikawa Tetsuji)
Maintenance information: 2024.4.8 operation confirmed
Accessories: none
Main specifications: 2 inch compression driver playback frequency band 600 Hz to 13 kHz impedance 8 ohms diameter 178 x D 145 mm 13.1 kg
※The rotation is slightly fast, but it is a specification, and since it is cheap, it is currently sold. current product. A fully automatic wireless turntable that combines the traditional analog technology of Technica with convenience. It can be connected to Bluetooth, so you can enjoy recording with wireless headphones, etc. The cartridge is included, and the phone is built-in, so you can easily enjoy it even with system components. There are no particularly large conspicuous wounds (Oikawa Tetsuji)
Maintenance information: 2024.4.15 Operation confirmed
Accessories: cartridge, instruction manual, power adapter, connection cable, EP adapter
Main specifications: belt drive 33/45 rotation W435.6 x H128 x D374 mm 5 kg
The price has been drastically reduced! 2024/2/23 sales price 39,800 yen This is an 8 ohm specification Japanese 1 inch driver developed for professional use. A must-see for anyone who owns the company's AH-501 horn. It makes a penetrating treble and deep mid-range sound unique to CORAL. It is also recommended for those who make their own speakers. There is paint peeling on the exterior. Serial 1304, 1325 (Fujisawa Yukishi)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: No accessories
Main specifications: throat diameter 25.4 mm (1 inch) sound pressure 104 dB impedance 8 ohms playback frequency 500 Hz-18 kHz magnetic flux density 18000 gauss maximum input 100 W diameter 120 x H74 mm 3.3 kg/piece
※It has a cigarette smell, so it's cheap. This is Series 2 with dual outputs. It is a famous machine that achieves both a mild and highly textured mid to high range while having an unquestionably high amount of information. The high level of musicality that never becomes stiff due to its moderate temperature is also attractive. The exterior has scratches, stroke marks, and dullness. Serial R1256, S1256 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cord, connection cord, brand new solbutton
Main specifications: full balance circuit input: XLR x 5/bypass XLR x 1 preamp part: W445 x H80 x D152.5 mm 11 kg power supply part: W445 x H38 x D122 mm 3 kg
The disposal price has been reduced. 2024/3/31 sales price 378,000 yen equipped with a long arm RMG309i for SPU-G shells! The dust cover will be replaced with a new one in 2022. You can enjoy the fluffy feeling unique to Torrens belt drives, and the afterglow of the sound fading away. You can enjoy the rich sound of the SPU, which is firmly scraped out from the depths of the sound groove. The phono cable is made by Canale, and the manufacturer of the armrest is unknown. As for the exterior, there is a slight feeling of use, dullness, etc. on the arms and armrests. Serial 12396 (Murakoshi Yoichi)
Maintenance information: 2022.2.13 maintenance (new dust cover created)
Main specifications: TD-521 belt drive floating system compatible with 33/45/78 main body W550 x H180 x D410 mm 15 kg RMG309 dynamic balance type needle pressure 0 to 7 g total length 408 mm effective length 320 mm overhang 11 mm
Comes with a stand. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. There is a feeling of use such as dullness and slight scratches over time (Yamato Yuki)
Maintenance information: 2024.4.16 sweep test good
Accessories: stand
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book (stand not included)
Record stabilizer from unknown manufacturer. It has a gold-plated finish, and the design looks great. There is a slight feeling of use such as a thread (Yamato Yuki)
Main specifications: diameter 80 mm, height 30 mm, dead weight 289 g (both measured)
A popular Fidelity-Research headshell. The headshell has a simple design and is compatible with light needle pressure tone arms (Yamato Yuki)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7.6g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. There is a feeling of use such as a slight small scratch (Yamato Yuki)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. There is a feeling of use such as a slight small scratch (Yamato Yuki)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Maintained by the manufacturer! Marantz consumer CD recorder. Only music CD-Rs with equal speed can be used. There are things that cannot be used with double speed CD-Rs. The D/A converter is a CD recorder equipped with the same DAC7 as the CD-16 and CD-17D, and has a smooth sound even as a CD player. There are scratches and stains on the top plate (Sasaki Shota)
Maintenance information: 2024.4.16 Manufacturer maintained (REC volume gap occurred, contact cleaning carried out. (Other operation inspections carried out)
Accessories: remote control, power cable
Main specifications: Recordable disc: CD-R for music, CD-RW for music W458 x H83 x D324 mm 8.0 kg
Balance cable 0.7 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound yet has a firm thickness in the mid to low range. The printing on the sheath has disappeared (Kojima Yosuke)
Accessories: none
Balance cable 0.6 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
Balance cable 0.6 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
Balance cable 0.5 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
※Only 1 balance cable is 9.9m. This is a standard BELDEN line cable with a firm outline of the Neutrik plug sound, yet has a particularly firm thickness in the mid to low range. The printing on the sheath part has disappeared (Kojima Yosuke)
Accessories: none
※Only 1 balance cable is 4.9m. This is a standard BELDEN line cable with a firm outline of the Neutrik plug sound while also having a firm thickness in the mid to low range. The printing on the sheath part often disappears (Kojima Yosuke)
Accessories: none
※Only 1 balance cable, 4.9m, is a standard BELDEN line cable with a firm outline of the Neutrik plug sound while having a firm thickness in the mid to low range. The printing on the sheath part has disappeared and there are seal marks on the plug shell (Kojima Yosuke)
Accessories: none
* No. 3 hot specification RCA-XLR conversion cable, 3.9 m pair, both end plugs are a standard BELDEN line cable that clearly shows the outline of Neutrik's sound yet has a firm thickness, especially in the mid to low range. The sheath printing disappears a lot (Kojima Yosuke)
Accessories: none
A popular vacuum tube headphone amplifier. By adopting a double triode vacuum tube push-pull system, you can enjoy powerful and dynamic sound. It is also attractive that it has an impedance changeover switch that can be used with various headphones. There are scratches and small scratches on the exterior. Serial 10090026 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 650 mW+650 mW 12 AU7 x 2 sticks 16 to 600 ohms W130 x H170 x D259 mm 3.5 kg
※It has a cigarette smell, so it's cheap. JOB's power conditioner will be in stock for the first time in about 4 years. Genuine Zephan product. Can be used up to 800W. AC noise reduction, sound energy, wide sound field, good sound quality of each one, and improvements in speed can be expected. There are dirt and scratches on the exterior. *One side outputs 100V and the other side outputs 110V. Serial 21103915 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: No accessories
Main specifications: capacity 800 W external dimensions W150 x H55 x D 208 mm 3.22 kg
RCA cable 0.5m pair REAN (Neutrik) RCA plug This is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range (Fujisawa Yukishi)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: No accessories
RCA cable 0.5m pair REAN (Neutrik) RCA plug This is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range (Fujisawa Yukishi)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: No accessories
※It is inexpensive because it is in poor condition such as scratches and dirt. An audio board that uses carbon, which is effective in absorbing slight vibrations. It brings out the smoothness and excellent resolution of the entire band. It's easy to feel the effects in a room with good SN. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: none
Key Specifications: W482 ✕ D380 ✕ H20mm Weight 5.6 kg
※It is inexpensive because it is in poor condition such as scratches and dirt. An audio board that uses carbon, which is effective in absorbing slight vibrations. It brings out the smoothness and excellent resolution of the entire band. It's easy to feel the effects in a room with good SN. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: none
Key Specifications: W482 ✕ D431 ✕ H20mm
※It has a cigarette smell, so it's cheap. High performance headphone amplifier with topping. It is compatible with a variety of headphones, and is an inexpensive yet cost-effective one. The size is also compact, so I recommend it. The exterior is dull. Serial 2101691163 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 3-stage gain setting, built-in NFCA circuit, dynamic range 145 dB, W222 x H45 x D160 mm
The price has been reduced. 2023/5/31 sales price 85,000 yen Asahi Lumber horizontal rack. It is a model with plenty of storage capacity and adjustable height. As an audio rack, its performance is high, and it is a stable unit. It is made of full-body natural wood, has a sturdy structure, and is highly decorative. ※Since this is a large item, shipping costs will be estimated separately. There are scratches, threads, etc. on the exterior. Also, felt is attached to the bottom (Takasaki Atsushi)
Accessories: none
Main specifications: W1227×D565×H1060mm
Maintained. This is 3009 series 2. The sharp, well-sharpened followability and solid tone due to the metallic knife edge are attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (elastic coupling rubber x 1, bed plate grommets x 4 replaced, base clamp nut x 1 installed, main body disassembly check and cleaning)
Accessories: instruction manual (English), phono cable
Main specifications: short arm static balance type total length 265 mm overhang 15 mm needle pressure (when 1 rider weight is attached) 1 memory 0.25 g steps/0 g to maximum 2.5 g needle pressure (when 2 rider weights are attached) 1 memory 0.5 steps/0 g to maximum 5 g cartridge weight up to 28 g
*Currently sold. It is an improved version of the small and popular blockbuster model CONTROL1, and its tight and energetic sound is impressive. It is a speaker that can be used in a variety of ways, from pure audio to surround sound (Mizushima Itsuro)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
Unspecified CD storage case. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Main specifications: W305 x H290 x D172 mm 2.3 kg (actual measurement)
Unspecified CD storage case. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W305 x H290 x D172 mm 2.3 kg (actual measurement)
※The Y lug on the ground cord on one side is missing. 24K gold plating is also applied to the electrode part and Y terminal of the 2.0m phono cable plug, so while ensuring durability, the sound stage also feels spacious. The cost performance is high! In addition to the appearance described above, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
The latest cable technology has been introduced, such as an XLR cable 0.6m pair conductor, a domestic high-purity PVC conductor (premium virgin oxygen-free copper) insulator, air-containing PE material (30% air content), and a 2-core twist structure. The AET sound is clear and sharp (Mizushima Itsuro)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: none
※Inexpensive because of the cigarette smell. Balance cable, 0.5 m pair, NEUTRIK plug. Neumann RCA cable familiar from the prestigious German family. Recommended for those who listen to classical music on records. Since it is slender and soft, it is useful in a variety of situations. There is a feeling of use due to appearance, dullness, friction, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Sold 1 bottle 12AX7 compatible ball smooth plate measurement value 54 (rejected value 32) The printing with white box has almost disappeared, but it was determined that it was an ECC83 made in Yugoslavia based on the structure ※The measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Sold in 1 bottle 12AX7 compatible ball made in Germany and determined from the German structure and date code to be ECC83 made in Germany Code: I62 Ki3C? Measured value 48 (rejected value 32) *The measured value represents the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: none
The price has been drastically reduced! 2024/4/5 sales price 398,000 yen ※Saran net is out of stock. Network maintenance was applied to the tweeter, and an oil finish was applied to exterior maintenance to give it a clean refresh! This model is a rare combination with the 075. A floor-type speaker system that can be grounded vertically or horizontally according to room preferences. It features a well-balanced sound style that you won't get tired of, and the enclosure has plenty of capacity, so you can feel the power of the bass and the depth of the sound. There are repair marks on the exterior. Serial 10927, 10938 (Fujisawa Yukishi)
Maintenance information: 2024.4.5 maintained (tweeter maintenance: horn polishing, magnetic circuit gap cleaning, terminal cleaning/screw replacement, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, exterior repair/polishing/oil finish, front and rear baffle repair/painting)
Accessories: No accessories
Main specifications: D130/075/N2400, 8 ohms, allowable input, 60 W, crossover frequency, 2.5 kHz, measured size W550 x H750 x D390 mm, 46.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/11 sales price 148,000 yen ※It is cheap because the condition is poor due to noticeable bumps and frayed saran nets. JBL 60th anniversary model. A tall boy who embodies a wide range of modern JBL sounds. It has a smooth, smooth tone, and is compatible with various genres without difficulty. Of course, you can also enjoy a sense of energy with a punch in the mid to low range. The exterior has blows, scratches, and fissures on Saran (Tamura Eiji)
Maintenance information: 2024.4.11 sweep test good
Accessories: saran net, spikes
Main specifications: 3 way 4 speakers 6Ω 90dB crossover frequency 2.5kHz, 8kHz W260 × H1,130 × D430 mm 35.6 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 278,000 yen The lively sound has been revived through careful maintenance utilizing original capacitors. JBL's rare 36cm coaxial 2-way unit LE14C is mounted on the S-99 Athena enclosure made by Utopia Equipment. The high frequencies are also connected to a cone-shaped unit, and you can enjoy a variety of music sources with smooth, natural sound. There are repair marks on the top plate and right corner. Serial 98300, 98311 (Fujisawa Yukishi)
Maintenance information: 2023.4.18 maintained (exterior maintenance (exterior cleaning/touch repair, top plate polishing/oil finish, lattice back fabric repair), unit maintenance (low frequency side: edge replacement, damper replacement, cone paper repair/coating, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning, high range side: magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning), Network maintenance (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT replacement with a brand new one. A frequency characteristic measurement check (~42 khz) was performed, and the original capacitor was continued to be used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex bookshelf type unit 35.5 cm coaxial 2-way (LE14C) network LX2-1 crossover 2,000 Hz impedance 8 ohms W450 x H610 x D346 mm
BNC cable 0.6 m is a 75 ohm digital coaxial cable for professional use that uses Oyaide Electric's “Precision Conductor 102 SSC” (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The price has been reduced. 2024/2/15 sales price 69,800 yen ※The remote control lid is out of stock, so it's cheap. Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function), high pass, low pass filter (2 levels each), etc., making it convenient. The exterior has line scratches on the top plate and threads on the front panel (Mizusaki Ryo)
Maintenance information: 2024.2.15 Maintained (remote control itself disabled → IR sensitivity adjustment VOL (internal) NG → replacement ~ adjustment. Other 006P holder NG → replace. (Poor button response in the remote control → all dismantled contacts polished)
Accessories: remote control, instruction manual, power cord
Main specifications: full remote control control amplifier with PHONO input (mm) W321 x H80 x D255 mm 3.3 kg
The price has been drastically reduced. 2024/4/14 sale price 1,450,000 yen Mark Levinson dual mono preamp No. 526! This is an ESS 32-bit D/A converter compatible with 192 kHz/32 bits. Also, it is equipped with plenty of digital inputs such as 2 coaxial, 2 optical, AES/EBU, and USB, and reproduces compressed digital sources with high fidelity. It is impressive that it has a more glossy SN feel than No. 326S. The exterior has a scratch on the upper front corner, and a small scratch on the back of the remote control about the size of a pinky finger nail (Sasaki Shota)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, manual, power cable, screwdriver, original box
Main specifications: analog input terminals/XLR balance x 2 pairs, RCA unbalance x 3 pairs, phono input x 1 pair, digital input terminal/XLR balance x 1 pair, RCA coaxial x 2, optical (Toslink) x 1, USB-B (asynchronous) x 1 output terminal/XLR balance x 1 pair, RCA unbalance x 1 pair, headphones (6.3 mm phono) x 1 W438 x H102 x D457 mm 18.6 kg
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Maintained! The 175 DLH horn is famous for its crisp, dry, and rich sound. While it has a sound that comes off quickly, it has a thick sound without being too hard, and it is a famous machine with a honeycomb lens that disperses sound. The exterior has scratches and a feeling of use over time. Serial 37086 36964 (Tomonori Asaine)
Maintenance information: 2024.4.9 maintained (magnetic circuit rust removal gap cleaning diaphragm adjustment screw replacement center adjustment terminal, 1 exterior cleaning horn, paint plate reapplied)
Accessories: No accessories
Main specifications: LE175/1 inch driver, 8 ohms, maximum sound pressure level, 108 dB, frequency characteristics, 800 Hz to 15 kHz, directivity 60 degrees (cone), allowable input, 30 W, W145 x H145 x D270 mm, 5.9 kg
It is a small class D digital amplifier made in China, and it is one that seems to come in handy on a desktop, etc., even in terms of size. It is an inexpensive model with excellent cost performance. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual (no Japanese), remote control, power cable
Main specifications: 150W×2 W100×H125×D10mm weight 1.45 kg
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book