JBL's exponential horn. Since it is a longhorn, it can be used at low crossover frequencies. Together with an acoustic lens, it is possible to create a monitor sound with high directivity. The exterior has bald paint, dirt, etc. Serial 20444/20547 (Tamura Eiji)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses) throat diameter 2.5 cm diameter 156 x D 293 mm weight 1 kg/book
Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/20 sales price 198,000 yen ※It is cheap because there is dirt, cigarette smell, and part of the stay is broken. Comes with stand 2505! 2 inch horn+ lens with huge slant plate. As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. The exterior has line scratches and paint peeling. Serial 17862, 18641 (Fujisawa Yukishi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
This wood horn is compatible not only with FOSTEX drivers, but also with JBL 1-inch drivers (3-point stop). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Asaine Tomoho)
Accessories: none
Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch wood parallel plywood W444 × H90 × D293 mm 3.1 kg (actual measurement)
The price has been reduced. 2024/4/1 sales price 19,800 yen JBL straight short horn for 1 inch drivers. It is a standard horn that has been used in various models. There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: Orientation characteristics 90° (horizontal) 45° (vertical) throat diameter 2.5 cm, crossover frequency 500 Hz or more, total length 216 mm, 1.1 kg/1
The disposal price has been reduced. Member discounts are not applicable. 2023/12/24 sales price 10,000 yen. Unknown 1.5 inch horn. There are 4 holes, but they didn't fit JBL drivers. The material is easy to process, so why not adjust it yourself? The exterior has scuffs and a feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W457 x H304 x D204 mm throat diameter 163 mm throat pitch 120 mm 2.6 kg
The price has been reduced! 2024/3/26 sales price 26,800 yen The sound spread is very good, and it seems to be good for PA systems. Rather than sending sound with a large output, it is a horn that feels like it can deliver a wide range of clean and organized sounds. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main Specifications: Compatible Driver JBL 2 inch (2446H/J 2450H/J 2485J, etc.) Throat Diameter 49mm 120°X40° Recommended Crossover 500Hz Baffle Opening Diameter W403xH238mm (front mount) W445xH279xD236mm 1.6 kg (1)
The disposal price has been reduced. Member discounts are not applicable. 2024/2/29 sales price 39,800 yen This is a bi-radial horn that uses an optimized aperture design. The horn's throat can be directly connected to the driver's phase plug, and we have succeeded in optimizing system performance. The main body is made of plastic reinforced with fiberglass, which maintains strength while reducing weight and eliminates resonance. *Since this is a 1.5 inch throat horn, a 2 inch throat driver cannot be used. There are small scratches on the entire exterior. Serial 005060, 005019 (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible unit 2447H/J, 2451H/J crossover frequency 500 Hz throat diameter 38 mm W559 × H457 × D254 mm 2.2 kg
The price has been drastically reduced. 2024/2/29 sales price 17,800 yen Small and lightweight flat front bi-radial horn. It is useful for stabilizing horizontal characteristics and correcting driver characteristics. It is a horn that stretches well in the middle range, making it difficult to feel noisy in the high range. Suitable for slightly smaller systems (Kanai Hidetsugu)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver, 2426H/J, use minimum frequency of 500 Hz, recommended minimum crossover frequency of 630 Hz, made of high density polyurethane, W448 x H173 x D 174 mm, 1.4 kg
The price has been reduced! 2024/2/22 The EXCLUSIVE Sectoral Wood Horn has arrived for the first time in a long time at a sales price of 99,800 yen! This horn is ideal for TD-2001, ED-911, etc. You can enjoy the exquisite sound of Japanese maple plywood with this wooden horn. A JBL 1 inch driver can also be attached. There are scratches and scratches on the exterior. Serial BC1012/BC1013 (Tamura Eiji)
Accessories: No accessories
Main specifications: Sectoral wood horn cutoff frequency 325 Hz mounting pitch diameter 57.2 mm throat opening hole diameter 25.4 mm opening dimensions W630 x H80 mm horizontal opening angle 120 degrees W630 x H90 x D381 mm 5.9 kg