Fully overhauled, including motor dismantling, 14 capacitors, 3 semi-fixed resistors, belts, insulator rubber feet, etc., and replacement of a total of 56 deteriorated parts! Limited edition model of 100 units! The tone arm is equipped with a beautiful SME 3012R. This is a rare long-arm turntable with a micro housework air bearing system. The ultra-heavyweight air float gunmetal platter has excellent regeneration power, high resolution in the low range that is difficult to distinguish, and the sense of stability in the mid to high range that is clearly positioned is perfect for a micro. There are small scratches, but it is a beautiful individual (Oikawa Tetsuji)
Maintenance information: 2026.2.17 Maintained (replacement of deteriorated parts on each board (capacitors, semi-fixed resistors)). Replace the internal and external air hoses of the main unit and air pump unit. Rotation switching SW contact cleaning, power supply SW, rotation adjustment VR replacement. Turntable shaft disassembly, cleaning and lubrication. Motor disassembly and cleaning, internal rotor cleaning, assembly after lubrication. Arm disassembly, bearing replacement, and drive SF belt replacement. Phono cable creation. Exterior cleaning. Drive belt attachment tool creation. After assembling the main unit, rotation speed was adjusted, needle pressure was checked, each speed was checked, sound output was tested, and comprehensive operation was confirmed.)
Accessories: power cable, handle, belt installation aid
Main specifications: gunmetal turntable weight 13 kg moment of inertia 2 tons/cm2 rotation speed adjustment range ± 6% W604 × H248 × D485 mm air pump RP-5070 W200 × H122 × D366 mm 5 kg
Maintenance has been completed, including replacement of a total of 50 deteriorated parts, such as 14 capacitors, 2 bearings, and 3 semi-fixed resistors! A high-performance analog player that combines precise technology developed with the company's SX-8000 etc. into an elegant design. The ultra-heavyweight air float gunmetal platter has excellent regeneration power, high resolution in the low range that is difficult to distinguish, and the sense of stability in the mid to high range that is clearly positioned is perfect for a micro. Equipped with the SME 3010R, which has a reputation for its good sound, it is a system you want to make a sound with an SPU, etc. The decorative plate is peeling off on the back (Oikawa Tetsuji)
Maintenance information: 2026.1.29 Maintained (replacement of deteriorated parts on each board (capacitors, semi-fixed resistors)). Replace the internal and external air hoses of the main unit and air pump unit. Rotation switching SW contact cleaning, power supply SW, rotation adjustment VR replacement. Turntable shaft disassembly, cleaning and lubrication. Motor disassembly and cleaning, internal rotor cleaning, assembly after lubrication. Arm disassembly, bearing replacement, exterior cleaning. Creation of drive belt hanging tools and platter mounting tools. After assembling the main unit, rotation speed was adjusted, needle pressure was checked, each speed was checked, sound output was tested, and comprehensive operation was confirmed.)
Accessories: air pump unit, handle, instruction manual, power cable
Main specifications: gunmetal turntable weight 13 kg moment of inertia 2 tons/cm2 rotation speed adjustment range ± 6% W555 × D440 × H250 mm 46 kg air pump RP-5070 W200 × H122 × D366 mm 5 kg)
The price has been reduced! 2025/11/10 sales price 39,800 yen*Inexpensive because the calibration microphone is out of stock. This is a digital amplifier equipped with S-MASTER PRO. Uses a one-board main board. It is made without unnecessary contact points, so you can enjoy a straightforward and stretchy sound. Equipped with loudness, 1 optical system, and 3 coaxial systems, and there are plenty of input/output, it is an amplifier that I like because it is built without cutting corners. There are small scratches and a slight feeling of use. Serial 2201532 (Fujisawa Yukishi)
Maintenance information: 2025.11.10 Operation confirmed
Accessories: remote control, power cord
Main specifications: PHONO MM compatible digital input light 1, coaxial 3 output 50W+50W (6Ω) frequency characteristics 20 Hz to 20,000 Hz size W280 x H111 x D286 mm weight approx. 4.6 kg
This is a popular Micro headshell with a sharp form. Neutral sound with magnesium. A raised line is printed on the mounting part, making it easy to install it straight, which is extremely important for cartridge settings. There are disappearing characters etc. on the exterior (Yonejima Satoshi)
Maintenance information: 2025.10.20 continuity confirmed
Accessories: No accessories
Main specifications: magnesium alloy dead weight 9g
※Shipping service. Special Issue No. 69 = <1>The Attractive World of Super-Large Speakers/<2>Latest CD Player Test/Published 1984.1.15. Published models: EXCLUSIVE/EXCLUSIVE C5 AUDIO RESEARCH/D250 YAMAHA/C2X, B2X LUXMAN/MQ50, CL40 MERIDIAN/MCA1_MC ELECTRO VOICE/BARON CD35I VICTOR/MC-L1000 JADIS/JA80 EXCLUSIVE/EXCLUSIVE 2402 B&O/M150-2 SERESSION/DITTON66 SERIES2 DIATON/DS1000 TECHNICS/SB-M3 HARMAN/KARDON/HK825, HK870 ACCUPHASE/E303X NEC/A11 SONY/TA-F777ES YAMAHA/A2000 EXCLUSIVE/EXCLUSIVE P3A MICRO/SX555FVW EMPIRE/ 4000D_3GOLD HIGHPHONIC/HP-T5, HP-T7, MC-A6, MC-D15 ENTRE/ET300 SME/3012R-PRO.” Since the photograph is a sample, the actual item may be broken or have markings etc.
Air bearing and vacuum record player. The arm is equipped with an SME 3010R. Excellent quietness and high resolution are achieved with the air bearing system and belt drive cultivated in the SX-8000. It is a famous machine that feels the style of a micro, combining enthusiasm for analog playback and precise technology into an elegant design. There are small injuries in places (Kojima Yosuke)
Maintenance information: 2024.7.19 Maintained (replacement of deteriorated capacitors and semi-fixed resistors on each board. Replace air hose fittings inside and outside the main unit and air pump unit. Rotation switching SW contact cleaning, power supply SW, rotation adjustment VR replacement. Turntable shaft disassembly, cleaning and lubrication. Motor disassembly cleaning, internal rotor cleaning, lubrication. Arm disassembly, bearing replacement, exterior cleaning. Repaint and clean the pulley cover. (Rotation speed adjustment, needle pressure check, each rotation speed check, sound output test)
Main specifications: belt drive 33/45 rotation gunmetal 31cm turntable air bearing system suction turntable W555 x H250 x D440 mm 46 kg RP-1100 (pump unit) W200 x H205 x D350 mm approx. 6.8 kg
Maintained! Premium air floating bearing belt drive player for enthusiasts. The ultra-heavyweight air float gunmetal platter has excellent regeneration power, high resolution in the low range that is difficult to distinguish, and the sense of stability in the mid to high range that is clearly positioned is perfect for a micro. Equipped with the FR-64FX, you can hear extremely sharp and sharp sounds. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 02100371 (Hiroki Aso)
Maintenance information: 2024.6.20 Maintained (deteriorated capacitors, semi-fixed resistors, replacement, main unit, air pump unit, internal and external air hose joint replacement, rotation switching, SW contact cleaning, power supply, SW rotation adjustment, VR rotation adjustment, turntable, shaft disassembly, lubrication, motor disassembly, lubrication, internal rotor cleaning, post-lubrication, assembly arm disassembly, bearing replacement, exterior cleaning, pulley cover, repainting/cleaning, rotation speed adjustment needle after main assembly (Pressure check, speed check, sound output test, overall operation check)
Accessories: power cable pump unit belt handle
Main specifications: SX-777air gunmetal turntable weight 13 kg rated speed 33 1/3, 45 rpm rotation speed adjustment range ± 6% body/size W555 x D440 x H250 mm weight 46 kg air pump/size W200 x H122 x D366 mm weight 5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/2/17 sales price 20,000 yen MICRO Seiki's optional arm base. It can be used for in-house arms MA-505/505X/505S/707X, SAEC/WE-407/23, Audiocraft/AC-300MK2, Technics/EPA-99, etc. There is a feeling of use on the exterior such as rubbing and dullness (Asaine Tomoho)
Accessories: none
Main specifications: Compatible models: SX-777, BL-111, BL-101, BL-91, RX-2000, hole diameter: 28 mm, weight: about 1.6 g
An air bearing and vacuum record player. The arm is equipped with AUDIO CRAFT AC-3000 Silver. Outstanding quietness and high resolution are achieved with the air bearing system+belt drive cultivated in the SX-8000. It's a famous machine that combines the passion for analog playback and precise technology into an elegant design, and you can feel the style of a micro. The exterior is dull overall (Oikawa Tetsuji)
Maintenance information: 2023.12.14 maintenance completed (deteriorated capacitors on each board, semi-fixed resistors replaced. Rotation switching SW contact cleaning, power supply SW, rotation adjustment VR replacement. Turntable shaft disassembly, cleaning and lubrication. Motor disassembly and cleaning, internal rotor cleaning, and assembly after lubrication. Arm disassembly, silicone oil removal, exterior cleaning. After the main unit was assembled, rotation speed was adjusted, needle pressure was checked, each rotation speed was confirmed, sound output test, and comprehensive operation confirmation were carried out)
Accessories: RP-1100, handle, optional weight
Main specifications: belt drive, 33/45 rotation, gunmetal, 31 cm turntable, air bearing type, adsorption turntable, W555 x H250 x D440 mm, 46 kg, RP-1100, W200 x H205 x D350 mm, approx. 6.8 kg
RCA cable, 1.0m pair, standard cable as an RCA plug microphone cable made by REAN (Neutrick). It features soft sound quality and ease of handling (Kojima Yosuke)
Accessories: none
* Armless (the previous owner installed SAEC and micro arms) You can enjoy clear sound quality with a double structure platter and a powerful servo motor. The arm base can be removed with screws. If you can do processing by yourself, you can build a double arm system of your choice (Yoichi Murakoshi)
Maintenance information: 2022.7.13 Maintenance (33,45, STOP button repair, IC, transistor replacement, servo adjustment.)
Accessories: transport screws
Main specifications: quartz lock 33/45 rotation W600 × H140 × D500 mm
* Phono cable is out of stock. A dynamic balance type short type tone arm that is easy to use. It's affordable yet sturdy, and is the perfect arm for those who want to use it with a jerk of pressure on cartridges. Appearance has small scratches and oxidation (Kimiya Miura)
Maintenance information: 2022.6.4 operation confirmed
Accessories: No accessories
Main specifications: Dynamic balance type Total length 322mm Running length 237mm Overhang 15mm Needle pressure range 0-3g
It is an air floating bearing belt drive player of the highest grade machine for enthusiasts! The ultra-heavyweight air float gun metal platter has excellent regeneration power and high resolution in the low range that is difficult to distinguish, and the stability of the mid-high range, which is localized sharply, is perfect for micro-likeness. Equipped with the FR-64S, you can hear a very sharp sound. The overall appearance is Kusumi, there are small scratches (King Exhibition)
Maintenance information: 2022.4.23 Maintained (electrolytic capacitor was replaced due to liquid leakage deterioration. I replaced the 33/45 switching relay due to poor contact. Turntable bearings have been submerged, so the bearings have been additionally adjusted. I removed the crate of the pump unit. The pump unit internal seismic cushion has been replaced. I installed rubber feet. I replaced the arm lifter disassembly silicone grease. (I checked the rotation and audio)
Accessories: power cable, pump unit, belt, handle
Main Specifications: SX-777Air Gunmetal Turntable Weight 13kg Rated Speed 33 1/3, 45 Rpm Rotation Speed Adjustment Range ± 6% Body/Size W555 × D440 × H250mm Weight 46kg air pump/size W200 × H122 × D366mm weight 5kg
It is an arm base that can be used for micro SX-777/BL-111/BL-101/BL-91/RX-2000, etc. It is a robust construction (Fujisawa Yukishi)
Accessories: original box
Main specifications: A-1203 type compatible arm FR-64 series, FR-14, etc.
Optional arm base for MICRO SEIKI Can be used for in-house arms MA-505, 505X, 505S, 707X, SAEC/WE-407/23, Audio Craft/AC-300MK2, Technics/EPA-99, etc. The appearance is rubbing, there is a feeling of use such as dullness (Morning Satoshi method)
Accessories: none
Main Specifications: Compatible Models: SX-777 BL-111 BL-101 BL-91 RX-2000 Hole Diameter 28mm Weight Approx. 1.6g
The successor of micro speaker 301.2 BS302 which condensed the unique charm of 300LINE has arrived. The sound field characteristic of this size is attractive, and the quality is too good enough as a desktop speaker. Recommended for those looking for high quality in micro size. The appearance is not noticeable scratches. Serial 35005E007877/35005E0078788 (Satoshi Yoneshima)
Maintenance information: 2021.8.20 Sweep check good
Accessories: Saran net, instruction manual, original box
Main specifications: Coaxial 2-way, sealed type efficiency 86dB impedance 4Ω frequency characteristics 80 to 35,000 Hz crossover frequency 80Hz/2,390Hz W91 × H121 × D122mm ( Weight 1.3 kg/when grille is installed
unit