This is Victor's classic MM cartridge. The sound makes you feel a unique sense of nostalgia. It's not delicate or precise, but it adds a good old atmosphere to the sound source. The exterior is dull and has a feeling of use (Ryuichiro Kaneko)
Maintenance information: 2026.4.19 sound output confirmed
Accessories: none
Main specifications: output 3 mV needle pressure 1.5 to 2.0 g dead weight 6 g
It's a headshell very similar to Victor's PH-6. It also has its own weight and seems to be easy to use. (TAMURA Eiji)
Maintenance information: 2026.6.3 continuity confirmed
Accessories: none
Main specifications: dead weight 14g
※Color loss and discoloration are noticeable, so it is inexpensive. All units use magnetic circuits with a pot-shaped internal magnetic structure that luxuriously use Alnico magnets. It is an excellent structure with a very elaborate cost in every corner, and while having high performance as a reproducer such as wide range and high resolution, it has excellent music playback ability, and its delicate, bright, and well-balanced sound typical of Victor is attractive. Serial 11300174L, 11300221R (Fujisawa Yukishi)
Maintenance information: 2026.5.31 Operation confirmed
Accessories: saran net
Main specifications: 3 way 3 speakers sealed floor type frequency characteristics 25 to 50,000 Hz impedance 4 ohms output sound pressure level 90 dB W550 x H807 x D372 mm weight 68.0 kg
A ribbon tweeter used in the company's speakers, Zero-3, etc. An aluminum diaphragm is used to achieve playback frequencies up to 100 kHz. There is a feeling of use such as dullness, scratches, etc., and there is slight corrosion on the horn part (Kojima Yosuke)
Maintenance information: 2026.5.29 Operation confirmed (sweep tested on a crossover 7kHz network)
Accessories: none
Main specifications: ribbon tweeter 8Ω polyimide heat-resistant film base flat voice coil W145 x H88 x D70 mm (actual measurement)
The price has been reduced. 2026/5/10 sales price 44,800 yen*Inexpensive because the woofers on both sides have concave nets. Dolce Eterno is a masterpiece of bookshelf speakers completed 25 years after the SX-3. This is an upgraded model that continues the tradition of famous machines. A clean, clear flavor has been added to the 500 series, which has a mellow tone and is rich. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.10 Operation confirmed
Accessories: none
Main specifications: 2-way bass reflex, anti-magnetic playback frequency band, 40 to 30,000 Hz, impedance, 6 ohms, output sound pressure level, 90 dB, W253 x H454 x D317 mm, 12.5 kg
It is a system equipped with an Audio-Technica AT-1503/3 in a Victor TT-81 phono motor and CL-P1D genuine cabinet. The model was developed by inheriting the technology of Victor's leading phono motor TT-101, and the AT-1503/3 is equipped, so you can fully enjoy the stable analog sound of yesteryear. Many people are still using it, and it satisfies both driving power and stability at a high level. The exterior has threads, etc., but it is beautiful for its age. Serial 14103382 (Yonejima Satoshi)
Maintenance information: 2023.11.16 Maintained (transistor replaced due to transistor corrosion deterioration. The electric field capacitor was replaced due to deterioration. Check each rotation operation)
Accessories: No accessories
Main specifications: [AT-1503/3] Static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g quartz lock DC servo direct drive W510 x H195 x D410 mm weight 16.5 kg (actual measurement)
*Currently sold. This is Victor's wood cone speaker. It was originally part of the system components, but it has a reputation for the sound of the speaker, and it is a popular model even after production has been completed. The subtlety of wood cones creates the brilliance of medium to high tones. The vocals and piano sounds are very beautiful. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.10 Operation confirmed
Accessories: saran net
Main specifications: Speaker unit used 8.5 cm wood cone full range W120 x H161 x D239 mm 1.6 kg
This is Victor's classic MM cartridge. The sound makes you feel a unique sense of nostalgia. It's not delicate or precise, but it adds a good old atmosphere to the sound source. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2026.3.28 sound output confirmed
Accessories: none
Main specifications: output 3 mV needle pressure 1.5 to 2.0 g dead weight 6 g
*Currently sold. Victor's small bookshelf. Although it is small, it has a good extrusion sound due to its unique design such as the uniframe baffle system. It has a good balance of high and low frequencies, perfect for jazz and rock. The exterior has dullness due to aging. Serial 14004689/ 14004689 (Yonejima Satoshi)
Maintenance information: 2026.5.4 sweep test is good
Accessories: saran net
Main Specifications: 2 Way Bookshelf Type Impedance 6Ω 89dB Dimensions W185 x H345 x D260 mm Weight 4.5 kg
The Victor V1 series premain amplifier is designed with an emphasis on sound quality and is still popular today. Simple is the best, not only in terms of appearance and size, but also in terms of volume, selector, and presence! Phono is also compatible with MM/MC. Scratches and paint deterioration can be seen on the exterior. Serial 11001694 (Yonejima Satoshi)
Maintenance information: 2026.4.22 operation confirmed
Accessories: remote control
Main specifications: 40W+40W (8Ω) 80W+80W (4Ω) W360 × H129 × D337 mm 13.5 kg
*Inexpensive due to missing remote control and missing lower tray opening/closing mechanism and transport lid, sold as is. Maintained. HMV series CD player. Although it has natural sound quality without any habit, the outline of each band is not lost, and it is a highly musical player. Every genre sounds elegant and exciting to listen to. The chic, streamlined body also makes a good impression. There are scratches and dullness on the exterior (Takasaki Atsushi)
Maintenance information: 2025.12.9 Maintained (front panel structure fixed) 2025.9.12 Maintained (loading belt replaced. (Internal optical system mechanical cleaning)
Accessories: none
Main specifications: digital output/coaxial, optical equipped W360 × H129 × D317 mm 7.2 kg
The price has been reduced. 2026/3/17 sales price 19,800 yen. Currently sold. Inexpensive because it is in poor condition. An advanced model in the 70s Victor SX series. The delicate high-frequency expression allows you to play music regardless of genre. The tone is relaxed. In addition to the exterior and torn saran net, there are many feelings of use, such as dullness, chipped corners, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.3.15 Operation confirmed (ATT is slightly cramped, but the current situation is)
Accessories: saran net
Main specifications: 3 way 3 speaker sealed type Kurt Müller corn paper usage frequency characteristics 25-20,000 Hz crossover 500/5,000 Hz 4 ohms W355 x H635 x D322 mm 25 kg
VICTOR glass turntable seat The sound image is clear, and a sense of speed comes out. There is a slight thread on the exterior label part in the center (Mizusaki Ryo)
Accessories: none
Main specifications: diameter 289 mm, weight approx. 0.8 kg
Head shell similar to the company's PH-6. It is a simple design with high versatility. The exterior is dull and has a feeling of use (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.8 continuity confirmed
Accessories: none
Main specifications: dead weight 12 g
This is Victor's classic MM cartridge. The sound makes you feel a unique sense of nostalgia. It's not delicate or precise, but it adds a good old atmosphere to the sound source. The exterior has a feeling of use such as dullness (Takahashi Nobuyuki)
Maintenance information: 2026.3.31 operation confirmed
Accessories: none
Main specifications: output 3 mV needle pressure 1.5 to 2.0 g dead weight 6 g
A speaker stand similar to the company's LS-800S. This stand is perfect for medium bookshelf speakers such as the SX-3 series and SX-500 series. On the exterior, there is a part where the felt insulator on the top is missing, and abrasions etc. can be seen (Yamato Yuki)
Accessories: none
Main specifications: W500 x H190 x D500 mm Speaker installation surface W350 x D350 mm 1.4 kg (both measured)
Comes with original box! It is an arm base that can be used with micro 1500/5000/8000 series. The exterior is dull and has small scratches (Ryuichiro Kaneko)
Accessories: original instruction manual box
Main specifications: Compatible arms: audio-technica AT1501/2, AT1501/3 MICRO MAX-282 fidelity research FR-66S AUDIO CRAFT AC-4000MC Victor UA-7045, UA-7082 SAEC WE-506/30 aperture diameter 41mm weight 1468g
The price has been reduced. 2026/3/17 sales price 7,000 yen This is Victor's classic MM cartridge. The sound makes you feel a unique sense of nostalgia. It's not delicate or precise, but it adds a good old atmosphere to the sound source. The exterior has a feeling of use such as dullness (Matsumoto Tsuyoshi)
Maintenance information: 2026.3.16 sound output confirmed
Accessories: none
Main specifications: output 3 mV needle pressure 1.5 to 2.0 g dead weight 6 g
Victor's 3-weight dollboy speaker. It is a masterpiece that combines a glossy sound that spans the entire area with a clear mid-range. It is characterized by a clear sense of transparency in mid and high tones, and shows its true value with female vocals, etc. The exterior has a feeling of use such as dullness and threads (Mizusaki Ryo)
Maintenance information: 2026.3.19 sound output confirmed
Accessories: instruction manual, original box
Main specifications: 3-way 4-speaker system bass reflex type (anti-magnetic JEITA) 32 Hz to 80,000 Hz W300 x H1029 x D345 mm (including foot part) 22 kg
Head shell similar to the company's PH-6. It is a simple design with high versatility. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.3.11 confirmed
Accessories: none
Main specifications: dead weight 12g
The disposal price has been reduced! (Member prices are not applicable) 2026/1/3 sales price 17,800 yen ※ phono motor only. The younger brother of the Quartz Rock DD turntable TT-81. This is an orthodox phono motor with a high degree of stability. There is dullness and oxidation. Serial 17605802 (Tamura Eiji)
Maintenance information: 2026.1.3 operation confirmed
Accessories: No accessories
Main specifications: FG detection quartz lock DC servo direct drive W350 x H120 x D350 mm 6.2 kg
Dolce Eterno is a masterpiece of bookshelf speakers completed 25 years after the SX-3. This is an upgraded model that continues the tradition of famous machines. A clean, clear flavor has been added to the 500 series, which has a mellow tone and is rich. The exterior has a feeling of use such as dullness and small scratches. Serial 0940053/0940053 (Tomonori Asaine)
Maintenance information: 2026.2.27 sound output confirmed
Accessories: instruction manual
Main specifications: 2-way bass reflex, anti-magnetic playback frequency band, 40 to 30,000 Hz, impedance, 6 ohms, output sound pressure level, 90 dB, W253 x H454 x D317 mm, 12.5 kg
Head shell similar to the company's PH-6. It is a simple design with high versatility. The exterior is dull and has a feeling of use (Matsumoto Tsuyoshi)
Maintenance information: 2026.2.26 continuity confirmed
Accessories: none
Main specifications: dead weight 12g (actual measurement)
A headshell with a thick aluminum body and resin finger rests. It is built with no resonance, and the sound quality is clear and of high quality vibration damping (Sasaki Shota)
Accessories: none
Main specifications: Molten aluminum, forged, dead weight 13.4 g
Head shell similar to the company's PH-6. It is a simple design with high versatility. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.2.18 continuity confirmed
Accessories: none
Main specifications: dead weight 12g (actual measurement)
Victor wooden speaker stand Compatible with a wide range of medium speakers. The height from the floor is just right, making it an easy-to-use speaker stand (Ryo Mizusaki)
Accessories: original box
Main specifications: W365 x H147 x D365 mm 0.85 kg
The price has been drastically reduced. 2025/10/28 A genuine Victor option clamper with a sales price of 35,000 yen became rare. For large CD players such as VICTOR XL-Z900/XL-Z999/XL-Z999EX. It fixes the disc firmly and rotates stably (Murakoshi Yoichi)
Accessories: none