※It has a cigarette smell, so it's cheap. Maintained! Modular phono equalizer for vacuum tube circuits. The Phono Module, a phono preamp with MC input using a head amplifier instead of a transformer, combines both a vacuum tube and a solid state device, so you can hear a very fine, supple, and stable sound. The exterior has scratches on the volume and top plate. Serial 3105993 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (power supply part rubber foot mounting vacuum tube pin cleaning volume cleaning connector part screw tightened. Audio check for each input/output ※It takes about 2 minutes for the sound to come out after the power is turned on → warm-up is complete. Also, when switching functions, a mute operation of about 15 seconds intervenes. Note: The XLR output is a variable output, so the volume is effective, but the RCA output is fixed. (not via volume)
Accessories: power cable
Main specifications: Vacuum tube used ECC83 x 1, ECC81 x 1, ECC88 x 1 Phono (MM, MC) LINE main body W437 x H80 x D390 mm weight 7.62 kg power supply unit W100 x H77 x D230 mm weight 4 kg
A rare item. Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 Inspection operation has been confirmed (during MC input, when the input is opened in high impedance mode, it is transmitted and lumpy noise is emitted (this is a specification). When the dips SW ② and ⑤ on the bottom plate are placed on the rear side, normal impedance mode becomes normal impedance mode and no noise is emitted. There is no sound during MM input → sound is made by turning off DIP SW ① and ② turned ON in MC input mode (on the rear panel side). (MC input setting for current 330 ohm load) Operation was tested with each function for internal inspection of the main unit and power supply unit.)
Accessories: power supply unit
Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg
※It has a cigarette smell, so it's cheap. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. The exterior has dullness, scratches, etc. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)). (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: remote control, power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
※It's cheap because of the smell of tobacco and the remote control being out of stock. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. There are scratches and scratches on the exterior. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)) has been performed. (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
Center speaker using the same unit as the LS60. The luxurious 3-way specification plays a part in building a theater system. On the exterior, there is a feeling of use, such as small scratches scattered on the top plate. There are small scratches on the exterior. Serial FY00030004240 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: spike, spike base
Main specifications: 16.5cm double woofer 3-way 4-speaker impedance 6Ω playback frequency band 50-40kHz allowable input 150W dimensions W672 x H217 x D235 mm weight 14.4 kg
Krypton speaker stand It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W249 x H620 x D325 mm Weight 7.2 kg/unit
A unique structure in which ribbon-shaped conductors using 1.0m pair collet chucks for RCA cables are arranged spirally on the outside of SVPE insulation. As a result, there is no extra cushioning on the positive side and negative side. The resolution is high and the low-frequency expression is excellent. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
RCA cable 1.0 m pair 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
※Because it smells like tobacco, it's cheap. 2IN/2OUT USB audio interface in the most compact body in the series. In addition to simultaneous microphone and guitar input, it is also compatible with audio applications with RCA line input/output. Serial 1890186 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 simple operation confirmed
Accessories: AC adapter
Main specifications: power consumption 2.5 W 146 x H55 x D120 mm 623 g
Maintained! This is the first AUDIO OF OREGON control amplifier to be in stock in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
Technics network SACD player. In addition to SACD, a wide variety of functions such as MQA-CD and network playback are attractive. It also supports various high-resolution formats. There are no noticeable scratches on the exterior. Serial GJ0D001023 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord, original box
Main specifications: CD playable disc: Super Audio CD (2ch stereo only), CD, CD-RW Bluetooth® Ver. 4.2 input/output terminal section: digital input: coaxial digital input x 1, optical digital input x 1, USB: type A connector USB 2.0Analog output: balanced output x 1, unbalanced output x 1 digital output: coaxial digital output x 1, optical Digital output x 1 USB playback/network playback compatible format WAV/AIFF (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz/16, 24, 32 bit) FLAC · ALAC (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz/16, 24 bit) DSD (2.8, 5.6, 11.2 MHz) AAC (32, 32, 32 bit) 44.1, 48, 88.2, 96 kHz/16 to 320 Kbps) MP3 (32, 44.1, 48 kHz/16 to 320 kbps)
The price has been reduced! 2024/4/23 sales price 258,000 yen Maintained! Comes with a cabinet. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a scratch on the cabinet and a crack in the mounting plate. Serial JEB7808 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Maintained (panel peeling fix. Polishing grease applied to all push switch disassembly contacts. Rotary switch contact cleaning. Volume contact cleaning. Electrolytic capacitor replacement, panel lamp replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D390 mm 11.8 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. Denon network CD receiver. It supports playback of music files on USB memory devices and direct playback of iPod/iPhone, and can play back FLAC/WAV/AAC files. Equipped with an FM/AM radio tuner, it also supports wide FM. Serial 6051253439 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: CD player section/playback frequency characteristics 2Hz to 20kHz sampling frequency 44.1 kHz tuner/reception frequency band/ FM 76.0 MHz to 95.0 MHz, AM522kHz to 1629kHz input terminal/analog audio input x 1, optical digital input x 2 output terminal/subwoofer output x 1, headphone output x 1, other input/output terminal/USB-A (Front) x 1, FM antenna input x 1, AM Antenna input x 1 W210 x H115 x D309 mm 4.0 kg
Internal and external maintenance completed in April 2023! The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound. There are line scratches and some chips on the exterior. Serial 58110513, 58110531 (Yonejima Satoshi)
Maintenance Information: 2023.4.1 Maintained (enclosure polishing, oil/wax painting. baffle paint. Lattice repair/polishing/painting, lining replacement. Unit maintenance (edge replacement. (Corn paper coating) Unit detachable)
Accessories: saran net
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg