The price has been drastically reduced! 2024/3/28 sales price 398,000 yen Electric has been maintained, including replacing a new windshield panel! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the appeal of the sounds of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is dull. Serial JLF1440 (Fujisawa Yukishi)
Maintenance information: 2024.4.24 Manufacturer maintained (various solder fixes on the driver board. windshield panel replacement Switch bezel fixing O ring replacement IC exchange. Capacitors were replaced at various other locations. Filter capacitor replacement. Other relays, transistors, etc. have been replaced, but please note that the pop noise of this unit is difficult to completely remove due to product specifications, so it can be heard slightly depending on when the power is turned on. Replace all front lamps. Lamp fixing grommet replacement There is a difference in meter runout when the volume is low, but when the output is raised by about 3/4, the difference is not very noticeable. Due to specifications due to individual differences in parts, improvements are difficult, so adjustments were made so that they fit at a position of approximately half a meter. Same confirmation and other inspections. *The VOL position is 05, which is the normal level of around 9 o'clock, but this is a specification. (If you are concerned, lower the CD level.)
Accessories: remote control, instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
Maintained! An exclusive popular preamp. It is packed with attention to communication from engineers, such as the quadruple attenuator volume with 22 contacts and the use of copper foil glass epoxy substrates. Oxygen-free copper wire is used as internal wiring material. The abundance of inputs, such as 3 PHONO systems and 3 AUX systems, is also attractive. The high quality, which is thick and roomy, is attractive. There are scratches and scratches on the exterior. Serial 001000885 (Yonejima Satoshi)
Maintenance information: 2024.4.25 Maintained (all lever switch disassembly contacts polished contact grease applied due to poor lever switch contact. Rotary switch contact cleaning. Check the operation of each input/output. (Capacitors have been maintained)
Accessories: No accessories
Main specifications: 22 contact attenuator PHONO 3 system TUNER 1 system AUX 3 TAPE system 3 stage switchable attenuator dimensions W468 x H206 x D342 mm weight 12.5 kg
It is a model designed to further enhance the results of the regular type, with the main focus on thoroughly eliminating sound quality deterioration factors such as mechanical vibration and electrical vibration. 4-tier rack for analog players with decoupler The exterior has dullness and scratches (Satoshi Yonejima)
Accessories: No accessories
Main specifications: shelf size/1st tier 160mm/ 2nd tier 180mm/ 3rd tier 60mm W600 ✕ H540 ✕ D475mm 8.8 kg
※The pole size is 32 mm in diameter, but the casters are inexpensive because they are 19 mm in diameter. Quadraspires 4-tier rack. In addition to excellent design, the structure based on theory is also attractive, as the shelf board has sufficient rigidity even though it has a simple structure, and is subtly curved and cut so that vibration components gather at the four corners. The exterior is dirty and dull (Yonejima Satoshi)
Accessories: casters
Main specifications: W588 x H515 x D395 mm (actual measurement) 1st stage 100 mm, 2nd stage 140 mm, 3rd stage 180 mm 12 kg (actual measurement)
XLR cable 1.0m pair REAN (Neutrik) RCA plug is a reliable and proven Negrex commercial cable. The sound quality is clear and straightforward. (YONEJIMA Satoshi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: No accessories
2 pcs per pair A convenient plug adapter for tight spaces or when you want to convert. There is oxidation on the exterior (Yonejima Satoshi)
Accessories: No accessories
This is a large and medium speaker base using magnesium struts injected with ultra-fine sand. It also creates effective ensembles for other subwoofers. There are scratches and dullness on the exterior (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W100×D400×H300mm 8,2kg/1 bottle
Comes with an acrylic cover. A cartridge keeper that can hold 6 cartridge shells. The clearance is large and easy to handle. There are scratches and dirt on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W200 x H107 x D100 mm weight 450 g (actual measurement)
*Currently sold. This is an AUDIO PHYSIC superwoofer. You can enjoy very powerful bass. The crossover can also be switched between 32/46/61/80/105 Hz, which is convenient. As for the exterior, there are line scratches, saran net holes, dull stains, etc. on the top plate. Serial 573 (Yonejima Satoshi)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: spikes, saran net
Main specifications: W260 x H625 x D400 mm 26 kg
RCA cable 0.6 m pair This cable thoroughly pursues air insulation to suppress the effects of static electricity. We have developed an ultra-low loss high foam insulator and realized a structure to prevent electrification. The sound quality is flat and easy to listen to. (YONEJIMA Satoshi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: No accessories
*Currently sold. Sealed active subwoofer equipped with a 50mm unit. Equipped with a 200W ICEpower amplifier. It has a mushroom structure that increases unit strength and achieves both sharpness and volume, and a sturdy paper kevlar is used for the cone screwdriver. There are some small scratches on the exterior. Serial 2112-0017814 (Yonejima Satoshi)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: power cable
Main specifications: Unit 250mm long throw amplifier output 200W playback frequency band 20Hz to 25/140Hz (-6dB, when EQ A is selected) playback frequency response 27Hz to 40/140Hz (±3dB, when EQ A is selected) rated consumption output 40W (0.5W in standby) W310 x H310 x D375 mm 12.50 kg
Maintained! It is a control amplifier that shines with a good sense of design such as the meter on the front panel. The sound quality makes you feel calm and natural. Recommended for those with high phono input quality and listening to records. As for the exterior, there is rust on the top plate. Serial 200655 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 Maintained (micro relay and resistor replacement, diode replacement. MONITOR lever SW replacement, volume VOL exchange Other head amplifier transistor deterioration replacement, power supply resistance, capacitor replacement, application of polishing grease to each other SW disassembly contact, confirmation of sound output for each input/output connection)
Accessories: No accessories
Main specifications: phono input: 2 systems (MC head amplifier built into PHONO1) W430 x H170 x D320 mm weight 11.2 kg
An RCA cable uses 1.0 m pair of silver-plated copper wires to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. Characters disappear and there is stickiness on the plug (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: case
RCA cable 1.0 m pair The copper/aluminum/brass hybrid configuration, which is also a characteristic of the company, has a high resolution and is an exciting sound that comes out quickly. There is some discoloration on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/23 sales price 118,000 yen This is a Rotel premain amplifier with a built-in D/A converter. It comfortably sounds modern sources with delicate and highly transparent sound quality. It is a convenient product that can also be used for high quality playback for display, with a wide selection of 3 types and 6 systems of D/A inputs. Serial 702-3421046 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: built-in D/A converter (optical coaxial USB) rated output 120W+120W W431 x H150 x D350 mm weight 13.7 kg