Replacement needle compatible with National EPS-19ST Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI)
Maintenance information: 2023.10.7 operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
Unspecified head shell. It is similar to the Technics SH-98D. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Unspecified silver shell. The exterior has dullness, abrasions, etc., and there is a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: dead weight 12g (actual measurement)
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)
Unspecified mmType cartridge. It's very similar to the cartridge that comes with the DENON DP-500M. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
Unspecified XLR (male) to RCA (female) conversion plug only. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.8.14 Confirmation confirmed
Accessories: none
Main specifications: No. 2 HOT
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
We generously use 3 types of luxurious high-purity materials, starting with the 1.2 m pair of RCA cables, pure silver coated OFC. Designed to go all the way to the tip of the terminal. This is a cable with a high degree of perfection that cannot be enjoyed in this class. There is an appearance, dullness, and a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
For the 5.2+6.2 m pair of untreated conductors for the speaker cable, 4 types of materials with excellent sound, mainly high-purity 6NCU, were selected. The deep low frequencies and dynamic playback sound are attractive. There is friction and dirt on the sheath (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Power cable, 1.5 m, high purity, 3 scare, high quality 3-core shielded power cable, a model that boasts performance that exceeds the preconceived notions of 6NCU+OFC hybrid entry models (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
RCA cable 1.0 m pair 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
Speaker cable 4.0m pair Y lug - banana 6N high-purity copper thick aluminum wrap shield. This speaker cable has an excellent balance between the warmth of the sound of 6N copper and elongation in the high range due to the silver coating. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
※This is a speaker cable with only 4.0 m untreated end, 6N high-purity copper thick aluminum wrap shield, and excellent balance between the warmth of the sound of 6N copper and elongation in the high range due to the silver coating. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. In addition to the exterior and finger tips being straight, you can also see a feeling of use such as dullness (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 9g
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
※Since it is cheap and the video system has not been checked, it is currently sold. Yamaha AV receiver. It is based on Yamaha's sound field creation technology Cinema DSP. It is equipped with a cinema DSP (3D mode) that realistically reproduces a three-dimensional surround space. There are line scratches on the rear panel and dullness on the front (Daiki Goto)
Maintenance information: 2024.2.25 Operation confirmed (2ch playback only)
Accessories: remote control, instruction manual, power cable, original box, antenna
Main specifications: W435 x H171 x D367.5 mm Weight 11.2 kg
The company's standard grade cable uses high-purity OFC (oxygen-free copper/4N) as the 1.0 m pair of RCA cables as OAI7 conductors to achieve transparent sound. Recommended for the first step in cable tuning (Tomoho Asae)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Balance cable 1.0m pair Glen optimized copper+polymer coating features a rich three-dimensional, high-contrast expression. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
The price has been reduced. 2023/8/12 sales price 19,800 yen speaker cable 1.5m pair single (Y lug) single side (Y lag) single side tri-wire (Y lag) specification A parallel arrangement structure that neutralizes and makes the flow of electricity accurate. A high CP cable that is smooth and has a sense of speed. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2023.8.12 Conductivity confirmed
Accessories: no accessories
Balance cable 1.0m pair Glen optimized copper+polymer coating features a rich three-dimensional, high-contrast expression. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
A set of 2 seems to be a choke transformer, but the details are unknown. Measured DC resistance value 380/373Ω W31H95 x 44mm 0.31 kg/piece (actual measurement, not including protrusions), only conduction and resistance values have been confirmed by a tester (Kojima Yosuke)
Accessories: none
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/4/28 sales price 118,000 yen Vienna Acoustic tall boy speaker. The low frequencies are modest, but you can enjoy the supple, transparent sound typical of Vienna acoustics. There are no major noticeable scratches, but there is a part of the foot that looks like it has faded on one side. There is stickiness in the back duct port (Oikawa Tetsuji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: spikes
Main specifications: 4Ω 90dB W188 × H878 × D250 mm 19 kg
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/9 sales price 6,500 yen MM type cartridge developed by inheriting the technology of the X-1 series. It inherits technology from the X-1 series, such as beryllium cantilevers, laminated cores, and samarium-cobalt magnets. Furthermore, the degree of perfection has been enhanced through theoretical analysis and strict hearings using computers. The exterior has a feeling of use such as dullness, scratches, and peeling of the front plate. There is a slight bend in the stylus (Jun Tamai)
Maintenance information: 2024.4.9 sound output confirmed
Accessories: none
Main specifications: mm type cartridge, suitable needle pressure 1.5 g to 2.0 g, dead weight 5.5 g
※ Present sale item. Victor microcomponent system UX-SH5 speaker. Unit unconfirmed because it does not come off the net. Serial 10612Z (Ryuichi Okubo)
Maintenance Information: 2019.2.14 Good Sweep Check
Accessories: None
Main Specifications: 1-way bass reff type W140 × H250 × D134mm Approx. 1.3 kg
Speaker cable 5.0 m pair M.C.CS 122 HYBRID is a Vandenhall speaker cable using a parallel multiple stranded wire structure. It is a character that carefully conveys musical expression, and brings depth to the expression of European speakers such as Tannoy, as well as domestic speakers. You can see a feeling of use, such as appearance, writing, dullness, deterioration, scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 continuity confirmed
Accessories: none
※The continuity of the 5.0 m line cable has been confirmed for only 1 line cable. The exterior is beautiful with little feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.20 Confirmation Confirmed
Accessories: none
The price has been drastically reduced. 2024/4/25 sales price 278,000 yen Maintained! A stereo power amplifier limited to 200 units. The careful, natural, and delicate sound that can be heard for a long time, backed by artistic internal wiring, is the true essence of Wesugi amplifiers. Modern speakers also drive quietly and firmly (Yasuhito Koshihama)
Maintenance information: 2024.4.25 Maintained (*confirmed above, lots of dust and dirt* input volume replacement, solder correction, misalignment correction, vacuum tube pin cleaning mold, dirt cleaning, foreign matter removal, bottom plate mounting reversed* bias check output audio check (output approx. 40W confirmed)
Accessories: none
Main specifications: 40W+40W vacuum tube ECC83 x 1 ECC82 x 2 EL34 x 4 W365 x H232 x D310 mm 31 kg
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
The price has been reduced! 2024/4/21 sales price 79,800 yen A masterpiece tuner equipped with an 8-stage varicon. It was introduced to the world as the first pulse-counting unit developed by Trio ahead of the rest of the world, and it is a model with a reputation for sound quality. You can get a sense of satisfaction just by turning the heavy tuning knob. Serial 530245 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: copy of instruction manual
Main specifications: FM dedicated tuner, equipped with 8 vari-controllers, W440 x H154 x D393 mm, 11.5 kg
※The sound output operation has been confirmed, but there is a slight band gap, and since it is cheap, it will be handed over as is. Trio quadruple varicon-type FM/AM tuner. The high range is moderate, but the fresh, thick sound that is difficult to obtain with a synthesizer tuner is attractive. The exterior has spots, small scratches, and rust spots (Mizusaki Ryo)
Maintenance information: 2015.3.4 manufacturer maintenance (The detection circuit offset has been adjusted. Other adjustments have been made to RF, detection, VCO, separation, meter, etc. (There is a contact problem with the switch and volume, but since parts are not available, the contacts have been cleaned)
Main specifications: W430 x H149 x D376 mm 8 kg
A 6cm full range is mounted in an enclosure that reproduces JBL's masterpiece Paragon in a small size. The back road horn and rear leg height can be adjusted, so it's quite elaborate (Murakoshi Yoichi)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: 6cm full range, 8Ω, W527 x H160 x D145 mm, 2.4 kg
Maintained including the creation of a new dust cover! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 2172380XCK00186 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg