A new-generation integrated upgrade that brings out the appeal of unique speakers as much as possible by raising the damping factor to 600 and bringing out the appeal of unique speakers as much as possible. The power amplification stage with 3 parallel push-pull power MOSFETs allows you to hear more powerful sound than before. There are no noticeable scratches on the exterior. Serial B0X159 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: rated output 180W+180W (8Ω) input RCA5 systems, XLR2 system, tape input/output 1 system, pre-out RCA1 system, XLR1 system main in RCA1 system, XLR1 system damping factor 600 size W465 ✕ H181 ✕ D428mm weight 24.6 kg
Maintained by Electri. A new generation of performance has been achieved by adopting a powerful new microprocessor and the latest audio-grade parts. All digital inputs are integrated into separate slot-in modules, and modules can be exchanged to support future new formats. You can experience the new era of McKinn sound, which is highly transparent and spacious. The top plate is rubbed and there is a small scratch (Oikawa Tetsuji)
Maintenance information: Maintained on 2024.5.1 Electric (front display assembly replaced. Front switch damage replacement. Update the console firmware program to the latest version. Set to factory default state. Operation confirmation, other inspections)
2024.5.8 Maintained (acrylic removal on meter and display, removal of internal fog)
Accessories: remote control, instruction manual, power cable, original box
Main Specifications: Frequency Characteristics: 10Hz to 100kHz S/N Ratio: Phono (MC) 80dB · Phono (MM) 82dB · High Level 95dB · Power AMP 113dB Analog Input: RCA ✕ 5 System/ XLR ✕ 1 System/ MC/MM ✕ 1 System Each Digital Input: USB (PCM32bit/384kHz, DSD256, DXD384KHz) ✕ 1 system/TOSLINK/coaxial (24 bit/ 192 kHz) ✕ 2 systems each, MCT (CD/SACD) ✕ 1 system W445 × H194 × D476 mm weight 34.1 kg
The price has been drastically reduced! 2022/7/12 selling price 698,000 yen A rare premain amplifier by Jeff Rowland. A beautiful tone where you can enjoy the drifting finish peculiar to high-end and the fine grain feeling. There is an amount of information comparable to that of a separate one, and you can enjoy all music genres with plenty of room. It is possible to build a high-quality system without taking up much space. The appearance has a feeling of use such as dullness and small scratches. Serial CU0013 (Hiroshi Aso)
Maintenance information: 2022.7.12 Operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: Output 500wx2 Frequency band 5Hz-45kHz Dynamic range 120dB Input terminal/unbalanced (RCA) 2 systems/balanced (XLR) 2 systems Output terminals unbalanced ( RCA) 1 system/balance (XLR) 1 system/speaker terminal 1 system Size W394 × H135 × D380 mm Weight 20 kg
Comes with original box, beautiful item! This is Luxman's flagship premain amplifier. Equipped with the new LECUA1000, the output stage of the preamp circuit uses a buffer circuit with a discrete configuration, a unique amplification feedback circuit ODNF Ver. 4.0, an LR independent block capacitor, and high sound quality parts permitted only for high-end models. It is the ideal type of premain amplifier advocated by Luxman. The exterior is in good condition with no scratches (Shota Sasaki)
Maintenance information: 2023.9.7 Operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: rated output 120W+120W (8Ω), 240W+240W (4Ω), 4 input lines, phono 1 system (MM, MC switching), balance 2 systems, separate input/output 1 system, W440 x D463 x H193 mm 29.3 kg
I cut the price. 2021/10/20 Selling price 628,000 yen Option TM-3 (list price 150,000 yen) with tuner module! A purine main amplifier equipped with a DA-converter compatible with 32bit/192kHz. It has a good sound that makes you energetic and has a margin, yet it has a solid gloss and demonstrates a potential that is not defeated by Separate. It is also nice that the phono equalizer is compatible with both MM/MC. As for the appearance, there are no noticeable scratches, but there is a slight stickiness on the remote control. Serial ACR1677 (Kimiya Miura)
Maintenance information: 2021.10.20 operation confirmed
Accessories: Remote control, instruction manual, power cable, connection cable, RAA2 AM ANTENNA, original box
Main specifications: 200W+200W (2, 4, 8 Ω) W445 × H194 × D481mm Weight 34.1kg
The price has been drastically reduced. 2024/2/24 sales price 698,000 yen A full digital premain amplifier equipped with a 32-bit S-Master PRO. The digital has 6 input systems, and is compatible with DSD playback by connecting to the company's SACD player with an i.Link terminal. The flagship model of Sony's high-end premium is attractive for its naturalness that doesn't make you feel digital, and its good sound separation. There are 2 blows in front of the top plate (Oikawa Tetsuji)
Maintenance information: 2024.2.24 Operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: digital input/optical x 1 coaxial x 4 (BNC x 1) analog input/RCA x 1 XLR x 1 i.LINK x 1 clock input/BNC x 1 150W+150W (8Ω) 300W+300W (4Ω) 10Hz to 50kHz W456 x H125 x D430 mm 21.8 kg
A new-generation integrated upgrade comparable to a separate amplifier that raises the damping factor to 600 and brings out the appeal of unique speakers as much as possible. The power amplification stage, which consists of three parallel push-pull power MOSFETs, makes you hear a more powerful sound than ever before. There are no noticeable scratches on the exterior. Serial C9Y406 (Yuki Yamato)
Maintenance information: 2022.8.18 Operation confirmed
Accessories: remote control instruction manual power cable original box
Main specifications: Rated output 180W+180W (8Ω) input RCA5 system, XLR2 system tape input/output 1 system pre-out RCA1 system, XLR1 system main-in RCA1 system, XLR1 system Damping Factor 600 Size W465 ✕ H181 ✕ D428mm Weight 24.6kg
With original box! The top model of the premain amplifier that Accuphase sent out to commemorate its 40th anniversary. Adopts AAVA method volume. The power amplifier part of pure Class A operation is resistant to changes in the surrounding environment. The amount of information filled with overwhelming silence and sense of scale. It is the height of a premain with a high degree of perfection. The appearance has a slight scratch on the right edge of the top plate (Shota Sasaki)
Maintenance information: 2021.12.2 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: 30W+30W (8Ω) 60W+60W (4Ω) Frequency characteristics 20Hz to 20kHz input terminal/balance (XLR) × 2 systems, unbalanced (RCA) × 5 system optional for rear panel Up to 2 boards can be added W465 × H191 × D428mm 24.7kg
The top-of-the-line model of the premain amplifier that Acupase sent to commemorate its 40th anniversary. Adopts AAVA system volume. The pure Class A operation power amplifier is resistant to changes in the surrounding environment. The amount of information filled with overwhelming silence and a sense of scale. It is the height of a premain with a high degree of perfection. There are no noticeable scratches on the appearance. Serial C4Y318 (Satoshi Yoneshima)
Maintenance info: 2021.11.15 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 30W+30W (8Ω) 60W+60W (4Ω) Frequency characteristics 20Hz to 20kHz input terminal/balance (XLR) × 2 systems, unbalanced (RCA) × 5 systems Optional for rear panel Up to 2 boards can be added: W465×H191×D428mm 24.7kg
The top model of the pre-main amplifier sent out by AccuPhase to commemorate the 40th anniversary of its founding. Adopts AAVA method volume. The power amplifier part of pure A class operation is designed to be resistant to changes in the surrounding environment. The amount of information filled with an overwhelming sense of silence and scale. It is the height of a premain with a high degree of perfection. There are some threads on the appearance. Serial A6X469
Maintenance information: 2022.4.2 operation confirmed
Accessories: remote control, copy of instruction manual, power cord
Main specifications: 30W+30W (8Ω) 60W+60W (4Ω) Frequency characteristic 20Hz to 20kHz input terminal/balance (XLR) × 2 systems, unbalance (RCA) × 5 systems Optional for rear panel Up to 2 boards can be added W465 × H191 × D428 mm 24.7 kg
We have drastically reduced prices! 2020/11/12 Sales price 628,000 yen A purine main amplifier equipped with a DA converter compatible with 32 bit/192 kHz. It is energetic and has plenty of sound that makes you feel good, yet it has a solid gloss and demonstrates the potential that does not lose to the separates. It is also nice that the phono equalizer is compatible with both MM/MC. The state of the appearance has some feeling of use, but it is good without noticeable scratches. Serial AE1168 (Yuki Yamato)
Maintenance information: 2021.11.12 Operation confirmed
Accessories: Remote control (HRO85) power cable (general purpose) instruction manual
Main specifications: 200W+200W (2, 4, 8 Ω) W445 × H194 × D481mm Weight 34.1 kg
The price has been reduced! 2024/5/25 sales price 598,000 yen Mark Levinson's current premain amplifier. It is composed of Mark Levinson's traditional full discrete, direct coupling, dual mono class A circuit preamp section and Class AB amplification, and a power section equipped with a large capacity power transformer and a large capacity capacitor. In addition to analog disc (MM/MC), high-resolution, and streaming playback, it also has an aptXHD compatible Bluetooth connection function. The exterior is generally good, but there is a slight scratch on the side (Tomonori Asaine)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: output 125 W+125 W (8 ohms) frequency response 2 Hz to 20 kHz input balance (XLR) x 1, line (RCA) x 2, phono MC x 1, MM x 1, optical x 2, coaxial x 1, USB 2.0-B x 1 Bluetooth connection compatible digital format linear PCM 32 to 384 kHz/32 bit, DSD 64 to 256 (2.8 to 11.2 MHz) digital processing MQA decoding, 7 PCM digital filters, upsampling to 352.8 kHz and 384 kHz, 4 DSD digital filters selectable W438 × H145 × D507 mm 28.1 kg
The price has been reduced! 2023/7/30 sales price 598,000 yen This is Luxman's flagship primary amplifier. The new LECUA 1000 is installed, and the output stage of the preamp circuit uses a buffer circuit with a discrete configuration, a unique amplification feedback circuit ODNF Ver. 4.0, an LR independent block capacitor, and high sound quality parts permitted only for high-end models. This is the ideal type of premain amplifier advocated by Luxman. The exterior is extremely slightly scratched and dull. Serial G20400493 (Asaine Tomonori)
Maintenance Information: 2023.7.28 Sound output confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: rated output 120W+120W (8Ω), 240W+240W (4Ω), 4 input lines, 1 phono system (MM, MC switching), 2 balanced systems, separate input/output system, 1 system, W440 x D463 x H193 mm, 29.3 kg
The manufacturer has inspected and maintained it! Special custom capacitors were generously introduced, and it's just that it took 4 years to develop, so the workmanship is quite impressive. The graininess of the sound is good, and the sound comes out comfortably throughout the entire range. There are some small scratches and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2023.4.11 manufacturer maintenance (main volume replacement, operation confirmation)
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 50W+50W (8Ω, 20Hz to 20kHz, THD 0.1%) 100W+100W (4Ω, 1 kHz, THD 0.7%) total harmonic distortion ratio 0.01% (rated output, at -3 dB), load 8Ω, 1kHz load 4 to 16 ohms PHONO (MM/MC) ±0.5 dB (20 Hz to 20 kHz) balanced input x 1, unbalanced input x 5, PHONO (MM) input x 1, PHONO (MC) input x 1, PHONO (MC) input x 1, EXT PRE × 1 analog audio output terminal unbalanced output (RECORDER) × 1 frequency characteristics 5 Hz to 100 kHz (0 to -3 dB) W434 × H181 × D504 mm 29.5 kg
A new-generation integrated upgrade comparable to a separate amplifier that raises the damping factor to 600 and brings out the appeal of unique speakers as much as possible. The power amplification stage, which consists of three parallel push-pull power MOSFETs, makes you hear a more powerful sound than ever before. There are no noticeable scratches on the exterior. Serial E0X366 (Yuki Yamato)
Maintenance info: 2022.7.25 Operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: Rated output 180W+180W (8Ω) input RCA5 system, XLR2 system tape input/output 1 system pre-out RCA1 system, XLR1 system main-in RCA1 system, XLR1 system Damping Factor 600 Size W465 ✕ H181 ✕ D428mm Weight 24.6kg
A new generation of performance is achieved by adopting a powerful new microprocessor and the latest audio-grade components. All digital inputs are integrated into separate slot-in modules, and modules can be replaced to support new future formats. You can experience a new-age McKin' sound with high transparency and plenty of room. The appearance is good with slight dullness. Serial AFM 2307 (Takasaki Atsushi)
Maintenance Information: 2023.6.26 Operation confirmed
Accessories: remote control, instruction manual, power cable, original box (inside)
Main specifications: frequency characteristics: 10Hz to 100kHz S/N ratio: Phono (MC) 80db · phono (MM) 82db · high level95db · power amp113db analog input: RCA ✕ 5 systems · XLR ✕ 1 system · MC/MM ✕ 1 system each digital input: USB (PCM32bit/384kHz, DSD256, DXD384kHz) ✕ 1 system · TOSLINK/ coaxial (24 bit/ 192 kHz) ✕ 2 systems each · MCT (CD/SACD) ✕ 1 system W445 × H194 × D476 mm weight 34.1 kg
The company 20th century flagship control amplifiers. Compared to the later digital control series, it has a strong sound and analog appeal. It is a very well-balanced amplifier that demonstrates punch power while maintaining a clear tone of the mid and high frequencies with a high-resolution sound without any habit. Serial A9Y103 (Itsuro Mizushima)
Maintenance information: 2021.12.9 operation confirmed
Accessories: instruction manual, power cable
Main specifications: input/unbalanced 7 systems, balanced 3 systems, output unbalanced 2 systems, balanced 2 systems W496 × H160 × D405mm 23.8kg
The price has been drastically reduced! 2023/12/2 sales price 648,000 yen This is Luxman's flagship premain amplifier. The new LECUA1000 is installed, and the output stage of the preamp circuit uses a discrete buffer circuit, a unique amplification feedback circuit ODNF Ver. 4.0, an LR independent block capacitor, and high sound quality parts permitted only for high-end models. It is the ideal premain amplifier advocated by Luxman. There are some scratches on the exterior. Serial G70900090 (Kimiya Miura)
Maintenance information: 2023.12.2 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: rated output 120W+120W (8Ω), 240W+240W (4Ω), 4 input lines, 1 phono system (MM, MC switching), 2 balanced systems, 1 separate input/output system, 1 system, W440 x D463 x H193 mm, 29.3 kg
I cut the price! 2021/2/20 Price 548,000 yen A new generation of performance is realized by adopting powerful new microprocessors and the latest audio grade parts. Integrate all digital inputs into independent slot-in modules and replace modules for future new formats. You can experience the Mckin sound of the new era with high transparency and clear. The appearance is in good condition without noticeable scratches. Serial AFM1262 (Satoshi Yonejima)
Maintenance Information: 2021.2.20 Operation confirmed
Accessories: Remote control, instruction manual, power cord
Main specifications: Frequency characteristics: 10Hz to 100kHz S/N ratio: Phono (MC) 80dB Phono (MM) 82dB high level 95dB Power amp113dB Analog Input: RCA ✕ 5 systems・XLR ✕ 1 system・MC/MM ✕ Each 1 system digital input: USB (PCM32bit/384KHz, DSD256, DXD384KHz) ✕ 1 line・TOSLINK/Coaxial ( 24bit/192KHz) ✕ each 2 strains · MCT (CD/SACD) ✕ 1 system W445 × H194 × D476mm Weight 34.1kg
The price has been reduced. 2024/4/30 sales price 548,000 yen Denon premain amplifier. They generously introduced special custom capacitors, and I can only say that 4 years of development were spent, so it's pretty good. The sound is well grained, and the sound comes out comfortably over the entire area. The exterior is good with no conspicuous scratches. Serial BMM15220700235 (Hiura Katsuji)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: instruction manual, remote control, power cable, original box
Main specifications: 50W+50W (8Ω) 100W+100W (4Ω) PHONO (MM/MC) balance input x 1, unbalanced input x 5, PHONO (MM) input x 1, PHONO (MC) input x 1, EXT. PRE×1 analog audio output terminal unbalanced output (RECORDER) ×1 frequency characteristics 5 Hz to 100 kHz W434 × H181 × D504 mm 29.5 kg
The price has been reduced! 2022/1/13 Selling price 548,000 yen A new generation of performance is realized by adopting a powerful new microprocessor and the latest audio grade parts. All digital inputs are integrated into independent slot-in modules, and the module can be replaced to support future new formats. You can experience the McKinn sound of the new era, with high transparency and space. Although there are some small scratches, it can be said that it is generally good (Fujisawa Yukishi)
Maintenance information: 2022.1.13 operation confirmed (sound output OK USB input PCM384kHz/DSD5.6MHz test OK. (Remote control OK phono MM/MC OK)
Accessories: remote control, instruction manual, power cord, original box, wrench
Main specifications: Frequency characteristics: 10 Hz to 100 kHz S/N ratio: Phono (MC) 80 dB · Phono (MM) 82 dB · High level 95 dB · Power AMP 113dB Analog Input: RCA ✕ 5 systems · XLR ✕ 1 system · MC/MM ✕ 1 system each Digital input: USB (PCM32bit/384kHz, DSD256, DXD384kHz) ✕ 1 system · TOSLINK/Coaxial ( (24bit/192kHz) ✕ 2 systems each · MCT (CD/SACD) ✕ 1 system W445 × H194 × D476mm Weight 34.1kg
The price has been drastically reduced. 2024/3/3 sales price 598,000 yen Mark Levinson's current pre-main amplifier. It is composed of Mark Levinson's traditional full discrete, direct coupling, dual mono class A circuit preamp section and Class AB amplification, and a power section equipped with a large capacity power transformer and a large capacity capacitor. In addition to analog discs (MM/MC), high-resolution, and streaming playback, it also has an aptXHD compatible Bluetooth connection function (Sasaki Shota)
Maintenance information: 2024.3.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: output 125 W+125 W (8 Ω) frequency response 2 Hz to 20 kHz input balance (XLR) x 1, line (RCA) x 2, phono MC x 1, MM x 1, optical x 2, coaxial x 1, USB 2.0-B x 1 Bluetooth connection compatible digital format linear PCM 32 to 384 kHz/32 bit, DSD 64 to 256 (2.8 to 11.2 MHz) digital processing MQA decoding, 7 PCM digital filters, upsampling to 352.8 kHz and 384 kHz, 4 DSD digital filters selectable W438 × H145 × D507 mm 28.1 kg
Disposal price cut (not eligible for member discount) 2021/7/18 sales price 548,000 yen New generation thanks to the adoption of powerful new microprocessors and the latest audio grade parts Achieve performance Integrate all digital inputs into independent slot-in modules, and replace modules for future new formats. You can experience the new era McKinne sound with high transparency and ample space. The appearance is in good condition without noticeable scratches. Serial AFM1262 (Hirotsugu Kondo)
Maintenance information: 2021.7.18 operation check
Accessories: Remote control, instruction manual, power cord
Main specifications: Frequency characteristics: 10Hz to 100kHz S/N ratio: Phono (MC) 80dB, Phono (MM) 82dB, High Level95DB, Power AMP113dB analog Input: RCA ✕ 5 systems/XLR ✕ 1 system/MC/MM ✕ 1 system digital input: USB (PCM32bit/384KHz, DSD256, DXD384KHz) ✕ 1 system・TOSLINK/Coaxial ( 24bit/192KHz) ✕ Each 2 systems/MCT (CD/SACD) ✕ 1 system W445 × H194 × D476mm weight 34.1kg
The price has been reduced! 2023/9/3 sales price 517,000 yen, beautiful item with box! Equipped with a new amplifier circuit “LIFES Version 1.0,” the graininess of the sound and sense of realism have become even more prominent while retaining the natural, gentle sound of the previous model. They seem to handle all genres flawlessly. The appearance is good with little feeling of use (Asaine Satoshi method)
Maintenance information: 2023.9.3 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: rated output 110W+110W (8Ω) 220W+220W (4Ω) input sensitivity/input impedance PHONO (MM) 2.5mV/47kΩ, PHONO (MC) 0.3 mV/100Ω, LINE 180mV/47kΩ, LINE 180mV/47kΩ, BAL.LINE 1
80 mV/79 kΩ, frequency characteristics PHONO 20 Hz to 20 kHz (within ± 0.5 dB) LINE 20 Hz to 100 kHz (within -3.0 dB) W440 × H178 × D454 mm 25.4 kg
※Since the remote control is out of stock, it is inexpensive. A full digital premain amplifier equipped with a 32-bit S-Master PRO. It also supports DSD playback by connecting to the company's SACD player with 6 digital inputs and an i.Link terminal. Sony's high-end pre-main flagship model is attractive for its naturalness that doesn't make you feel digital and good sound separation. There are line scratches in the center of the top plate and center of the front. There is black friction in the power switch and volume (Fujisawa Yukishi)
Maintenance information: 2023.10.5 Operation confirmed
Accessories: power cord
Main specifications: digital input/optical x 1 coaxial x 4 (BNC x 1) analog input/RCA x 1 XLR x 1 i.LINK x 1 clock input/BNC x 1 150W+150W (8Ω) 300W+300W (4Ω) 10Hz to 50kHz W456 x H125 x D430mm 21.8 kg
The price has been reduced. 2022/7/20 selling price 517,000 yen Equipped with a new amplifier circuit “LIFES Version 1.0,” the natural and gentle sound of the old model is intact, while maintaining the grain of the sound, The sense of realism is becoming even more prominent. It seems that they will do all genres well. The appearance is good with little feeling of use (Hitoshi Kobayashi)
Maintenance information: 2022.7.20 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Rated output 110W+110W (8Ω), 220W+220W (4Ω) Input sensitivity/input impedance PHONO (MM) 2.5mV/47kΩ, PHONO (MC) 0.3mV/ 100Ω, LINE 180mV/47kΩ, BAL.LINE 1
80mV/79kΩ, frequency characteristic PHONO 20Hz to 20kHz (within ±0.5dB) LINE 20Hz to 100kHz (within -3.0dB) W440×H178×D454mm 25.4 kg