The price has been reduced. 2023/3/22 sales price 150,000 yen. A rare wooden sand-filled horn from Onken (Onken) is in stock. It comes with a slot to which Altec or JBL 1-inch drivers can be attached. The material is very carefully made and is moderately soft, so it is rich in expressiveness. You can enjoy warm sound when combined with OS-500MT (Murakoshi Yoichi)
Accessories: Transformation Throat
Main specifications: wooden sector horn, metal slot, recommended usage frequency band, 500 to 25,000 Hz, compatible unit OS-500MT, W560 x H250 x D420 mm, 6.82 kg
The price has been reduced. 2023/3/22 sales price 248,000 yen. Comes with stand 2505! 2 inch horn+lens with huge slant plate It is the size and presence of “ghost horn” as it is nicknamed. The echoes of the exponential horn with an elliptical aperture create a natural sound with no particular peculiar features. There is a feeling of use on the exterior, such as JBL stickers attached, slight paint peeling, abrasions, etc. (Murakoshi Yoichi)
Accessories: Stay (2505)
Main specifications: crossover frequency 800 Hz slot diameter 5 cm dimensions W914 x H305 x D483 mm weight 10.5 kg/1 bottle
Bi-radial Horn for JBL 2" Driver Since there is no depth and the opening is large, it makes you hear a light and open sound. It's a horn that's pretty playable because it's not tough, has a mild sound, and is small and lightweight. serial 24840. 25472 There are scratches and a feeling of use on the exterior (Katsutsugu Hiura)
Accessories: none
Main specifications: bi-radial horn cutoff for 2 inches 400 Hz horizontal 60 degrees vertical 40 degrees throat diameter 5 cm dimensions W445xH279xD236mm weight 2.2 kg (1 piece)
2" PA horn It's cheap yet well-made, and doesn't make you feel cheap. A JBL 2-inch driver can be mounted. (TAMURA Eiji)
Accessories: no accessories
Main specifications: throat diameter 2 inches angle 60 degrees ✕ 40 degrees W315 ✕ H185.4 ✕ D154.9 mm weight 2.2 kg/book
The price has been drastically reduced. 2022/9/11 sales price 99,800 yen Please enjoy the thick, exciting sound by attaching a 2-inch driver such as a large radial horn 2440 for professional use. The strong sound pressure that comes out straight through is impressive. It is also recommended as an introduction to large horns. The exterior has a feeling of wear over time, such as bumps, paint peeling, etc. (Fujisawa Yukishi)
Accessories: none
Main specifications: 2350: crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 x H615 x D215 mm 11.3 kg/book
The price has been reduced. 2022/11/16 Sales price 39,800 yen*The exterior is dead with petil sheets, but the current situation is. The large horn of the electro voice sounds clean and open, and you can enjoy the unique three-dimensional effect of vocals, etc. It is a convenient specification that allows a JBL 2-inch screwdriver to be attached. There is a feeling of use on the exterior, stains, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2 inch radial horn driver, mounting part, outer diameter, 128 mm, slot diameter, 50 mm, screw pitch (diagonal), 102 mm, W712 x H334 x D434 mm, approx. 3.8 kg
※It is inexpensive because it has dead marks. A short horn used in the 43 series. It can also be built into an enclosure, but you can hear good sound even if you attach a screwdriver and place it on top of the enclosure. On the exterior, tape marks are conspicuous. Serial 55128/55468 (Tamura Eiji)
Accessories: no accessories
Main specifications: 80 degrees horizontal and 45 degrees vertical orientation for 1" drivers Recommended crossover 1.2 kHz baffle opening diameter 108 mm depth 216 mm
The price has been drastically reduced. 2023/1/19 sales price 398,000 yen with driver stand! A 2-inch special horn machined out of wood by Tematsu Sound Works. The natural sound that stretches smoothly even on high frequencies with good sound that can only be obtained with this horn is amazing. Compatible with JBL 375/376/2440/2441/2450/2446, TAD TD-4001 TD-4003 (Fujisawa Yukishi)
Accessories: self-made stand
Main specifications: SH maple urethane colored paint finish, 2 inch driver unit, directivity 70 degrees horizontal x 50 degrees vertical, recommended crossover 500 Hz or more, measured external dimensions W650 x H290 x D600 mm, measured weight 25 kg
Disposal prices have been reduced! (Member discounts do not apply) 2022/9/15 sales price 79,800 yen Exponential horn with unknown details. It is similar to JBL 2343, but the size is slightly different. Of course, JBL's 2-inch drivers can be mounted. The exterior has paint peeling and dullness. (TAMURA Eiji)
Accessories: no accessories
Main specifications: W333 x H182 x D250 mm weight 3.3 kg/book (actual measurement)