Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Network players
- Integrated amplifiers
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Cables
- Insulators
- Racks
- Parts
- Tubes
- Manual
- Audio set
- Other audio
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other records
- Other soft
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- The price has been drastically reduced! 2023/12/1 sales price 99,800 yen*Spike covers are now in stock. An impressive premain amplifier with Yamaha's traditional retro design. It is an amplifier that inherits the characteristics of the delicate and elegant old Yamaha sound. It comes with a PHONO input and features balanced ease of use in all aspects. As for the exterior, there are scratches on the front panel and side wood. Serial Y03691800 (Yonejima Satoshi) Maintenance information: 2023.12.1 operation confirmed Accessories: remote control instruction manual power cable spike cover Main specifications: full-stage balanced amplification output 90W+90W (8Ω) Phono (MM/MC) dimensions W435 x H137 x D465 mm, weight 22.7 kg
- description
- The manufacturer has maintained it! This is the 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, and loud mid-low frequencies and well-sharpened tones. There is a feeling of use such as dullness, dirt, slight loss of input characters, sunburn on the SP terminal, etc. Serial 2061502843 (Takasaki Atsushi) Maintenance information: 2023.10.19 manufacturer maintenance completed (phono part ground side replacement, MM/MC changeover switch replacement, volume volume/SD switch contact restoration agent application, input select switch disassembly/contact polishing/lubricant application, idling adjustment. Operation test.) Accessories: instruction manual copy, power cord Main specifications: High rigidity, 6-block, separate chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
- description
- Maintained! A late model in the popular classic 607 series. The resolution is high, the outline is clear, and matches well with modern speakers. You can experience the mid-low range, which has a sense of power, in this price range. The exterior has dullness and small scratches. Serial 60505454 (Yonejima Satoshi) Maintenance information: 2023.11.18 maintenance completed (input selector, other switch disassembly, polishing, grease application (tone, loudness, muting, subsonic, processor, power amplifier direct, source direct, tape), master volume, switch cleaning, output relay replacement, solder main part repair, pin jack polishing, stop screw rust removal, interior and exterior cleaning, each input/output check, operation inspection) Accessories: copy of the instruction manual Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
- description
- Maintained! A premain amplifier with clear contours and sharp sound quality. In addition to the conventional sense of dynamism, it is an amplifier with a high degree of perfection with a wide high frequency range. The low range with good extrusion generated from the powerful power supply unit is an advantage unique to the XR series. It is suitable for jazz and rock music. There is a feeling of use such as scratches, dirt, etc., and the panel board floats. Serial 613100151 (Takasaki Atsushi) Maintenance information: 2023.12.10 maintained (input selector and other switches below, disassembly, polishing grease application (power amplifier direct, source direct, tape, rackout, tone, loudness, subsonic, muting, processor switch), output relay, headphone relay replacement, main amplifier, power supply part and other solder repair, volume cleaning, internal inspection and cleaning, inspection and adjustment, running test .) Accessories: copy of the instruction manual Main specifications: 160W+160W (6Ω) 130W+130W (8Ω) rated power consumption: 330W, W466 x H162 x D452 mm, 23 kg
- description
- The price has been drastically reduced! 2023/12/8 Sales price 178,000 yen Maintained by Luxman! This is a pure A grade premain amplifier that combines subtlety and strength. The smooth, glossy sound unique to Lux Class A amplifiers with a sense of scale is attractive. Low frequency playback also has a sense of volume, and it has a reputation for being compatible with European speakers such as TANNOY. As for the exterior, there are small scratches on the front and cabinet. Serial A20715616A (Yonejima Satoshi) Maintenance information: 2023.12.8 manufacturer maintenance completed (balance volume replacement. Protector relay replacement. Main part limiter circuit capacitor replaced. Solder deterioration part fixed. (Other parts inspection and readjustment) Accessories: copy of the instruction manual Main Specifications: 50W+50W (8Ω) Pure A Class Operation Large Capacity Toroidal Transformer Equipped with Phono Equalizer MM/MC Compatible W438 x H176 x D467 30 kg
- description
- The price has been drastically reduced! 2023/12/2 sales price 648,000 yen This is Luxman's flagship premain amplifier. The new LECUA1000 is installed, and the output stage of the preamp circuit uses a discrete buffer circuit, a unique amplification feedback circuit ODNF Ver. 4.0, an LR independent block capacitor, and high sound quality parts permitted only for high-end models. It is the ideal premain amplifier advocated by Luxman. There are some scratches on the exterior. Serial G70900090 (Kimiya Miura) Maintenance information: 2023.12.2 operation confirmed Accessories: remote control, instruction manual, power cable Main specifications: rated output 120W+120W (8Ω), 240W+240W (4Ω), 4 input lines, 1 phono system (MM, MC switching), 2 balanced systems, 1 separate input/output system, 1 system, W440 x D463 x H193 mm, 29.3 kg
- description
- In addition to the scuff marks on Source Direct, there are many small scratches and stains, so it is inexpensive, and is currently sold. DENON's premain amplifier has excellent cost performance. Suitable for entry-level machines and second systems (Murakoshi Yoichi) Maintenance information: 2023.12.8 sound output confirmed Accessories: remote control, instruction manual copy, power cord Main specifications: 70W+70W (8Ω) 140W+140W (4Ω) PHONO/MM/MC switching compatible W434 x H134 x D407 mm 14.6 kg
- description
- The manufacturer has maintained it! Accuphase entry pre-main amplifier. It is equipped with the same AAVA volume control system as higher-level models such as the E-560. Even though it's an entry-level machine, it boasts a degree of perfection that makes you feel the high quality typical of Accuphase everywhere. The exterior is beautiful even though there is some feeling of use. Serial 15X158 (Asaina Tomonori) Maintenance information: 2023.12.9 maintenance completed (COMP switch replacement, other switch cleaning, TONE rotary cleaning, inspection and adjustment of each part, safety check, pressure resistance check, pressure resistance check ※ currently using a non-shorting type switch, and when the switch is pressed, there is a buzzing sound, but it is not abnormal) Accessories: original box remote control power cable instruction manual Main specifications: 115W+115W (6Ω) 105W+105W (8Ω) W465 x H151 x D420 mm 20 kg
- description
- Maintained! This pre-main amplifier is characterized by the clean sound quality typical of Yamaha and the fineness of the mid to high range. The PHONO input is MM/MC compatible, and is also recommended for analog users. There is a feeling of use such as dirt and scratches. Serial 128265 (Takasaki Atsushi) Maintenance information: 2023.12.7 maintained (switch, volume type disassembly, contact polishing. All main board solders have been fixed. Panel disassembly knob cleaning, input/output pin jack polishing.) Accessories: copy of the instruction manual Main specifications: 100W+100W (8Ω) MM/MC compatible W435 x H112 x D365 5mm 9.1 kg
- description
- Hi-Fi Hall's first appearance! Sharp's high-end premain became Japan's first digital amplifier. It uses 1-bit digital amplifier technology jointly developed with Waseda University to achieve reproduction that is extremely close to the original sound. The exterior has small scratches and a feeling of use (Hiura Katsugu) Maintenance information: 2023.11.29 Operation confirmed (iLink Audio input not checked) Accessories: power cord, insulator Main specifications: 1 bit amplifier rated output 100W+100W (8Ω) frequency characteristics 5Hz to 100kHz+1-3db digital input ST optical, BNC coaxial, RCA coaxial, 1 optical system each analog input RCA2 system, XLR1 system output terminal digital optical, 1 RCA analog system each W472 x H89 x D462 mm 18.5 kg
Manufacture:Cambridge Audio
Price: JPY 72,545 Sold Out
- description
- The price has been drastically reduced. 2023/11/24 sales price 89,800 yen Cambridge Audio premain amplifier that supports up to DSD256 with USB input. The ESS saver ES9010K2M is used as the DAC. The full range of performance that greatly exceeds the price, such as Roon support, is attractive. The degree is generally good (Murakoshi Yoichi) Maintenance information: 2023.11.17 sound confirmed Accessories: remote control, instruction manual, power cord, antenna, original box Main specifications: 60W+60W (8Ω) analog input 4 systems, digital input coaxial, optical, USB, Bluetooth PCM32 to 384 kHz, DSD256 or DOP256 up to W430 x H115 x D341 mm 8.3 kg
- description
- Maintained! This is a masterpiece primain with an exhilarating thickness in the middle range and thickness of the low range. The special phono part uses a transformer to boost the built-in MC. Compared to lower models, it combines care that allows you to enjoy classical music. The exterior is scratched on the top of the front, and there are other threads and stains overall (Mizusaki Ryo) Maintenance information: 2023.11.17 Maintained (input selector and other switches below, disassembly, polishing grease application (tone, filter) 16 Hz, 20 kHz, tape, muting, rackout switch), balance, treble, bus volume exchange, output relay, headphone relay replacement, main amplifier circuit transistor, semi-fixed VR, capacitor replacement, solder repair, each volume, switch cleaning, pinjack polishing, internal inspection and adjustment, operation confirmation. (*If the power is turned off when the tone is on, a popping sound may appear, but there is no effect on sound quality, etc.) Accessories: copy of the instruction manual Main specifications: 130W+130W (8Ω) W460 x H160 x D444 mm 18 kg
- description
- Denon's best-selling model. In addition to the thickness of the mid to low frequencies, the sound that smoothly extends to the high frequencies is attractive. It is an amplifier that incorporates the functions of high-end machines, such as a separate function that allows phono MM/MC switching and pre-out power-in. There are no noticeable scratches on the exterior. Serial 2111500737 (Kimiya Miura) Maintenance information: 2023.11.26 operation confirmed Accessories: remote control, instruction manual, power cable Main Specifications: Rated Output 80W+80W (8Ω) Speaker Output 2 Systems AORB Load 4Ω to 16/A+B Load 8Ω to 16Ω W434 x H181.5 x D434.2 mm Weight 24.4 kg
- description
- The price has been reduced. 2023/6/28 Sales price 39,800 yen ※The SP terminal is missing. Maintained Marantz premain amplifier with excellent cost performance. The solid, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are of a quality unique to that time. There are signs of use such as dullness, scratches, peeling of side paint, back corrosion, etc. Serial MZ01938040636 (Takasaki Atsushi) Maintenance information: 2023.6.28 maintenance completed (switch and volume type disassembly contacts fixed. It's fine when the direct switch is on, but there is a slight gang error when off. (Each part can be decontaminated and the sound output check for a long time is OK) Accessories: copy of instructions Main specifications: 20W+20W (grade A time) 100W+100W (AB grade time) W454 x H165 x D380 mm 17.5 kg
- description
- Maintained! A pre-main amplifier where you can enjoy the luster and thick sound typical of Sansui. What should be noted is the mid to low range, and the bass line, which clearly shows the outline, is an appeal unique to the KX series during this period. There is a feeling of use such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2023.3.15 Maintained (input selector, power amplifier direct, source direct, tape, readout switch disassembly, polishing grease application, output relay replacement, solder main part repair, each volume, switch cleaning, pin jack polishing, internal inspection and cleaning, offset adjustment, operation confirmation) Accessories: copy of the instruction manual Main Specifications: 90W+90W (8Ω) Phono mm/MC Compatible Dimensions W430 x H161 x D446 mm Weight 18.0 kg
- description
- A pure Class A operating pre-main amplifier with a simple design and functionality. An amplifier that combines good graininess and thickness, and has a reputation for its high ability. The height of Cost Puff Ormans is also good. As for the exterior, there are scuffs and line scratches on the top plate. Serial 0001809 (Kimiya Miura) Maintenance information: 2023.11.28 Operation confirmed Accessories: remote control, power cable Main specifications: 120W+120W (8Ω) 135W+135W (4Ω) input/balance 2 systems (XLR) unbalanced 3 systems (RCA) output/speaker output 1 system RECOUT1 system W435 x D375 x H123 mm 14.3 kg
- description
- Denon's mid-range model. You can enjoy all genres with modern response and unobtrusive sound quality. Since it is relatively thin, this model is recommended for those who are concerned about space. Phono is MM/MC compatible. The exterior is dull. Serial 0041500188 (Kimiya Miura) Maintenance information: 2023.11.23 operation confirmed Accessories: remote control, power cable Main specifications: rated output 70W+70W (8Ω) dimensions W434 x H134 x D410 mm, weight 15.5 kg
- description
- Disposal prices have been reduced! (Member discount is not applicable) 2023/11/25 Marantz high-end premain amplifier PM-11S3 with sales price 228,000 yen. A new circuit “SA Driver” has been introduced to the power amplifier circuit, and all circuits from input to speaker output have been increased at high speed. It's an amplifier that lets you listen to spatial expressiveness, decisive tones, and low frequencies with a rich sense of scale. The exterior is good with no noticeable scratches. Serial 15001630001168 (Yonejima Satoshi) Maintenance information: 2023.11.25 Operation confirmed Accessories: remote control, power cable, instruction manual, original box Main specifications: 100W+100W (8Ω) 200W+200W (4Ω) damping factor 100 input terminal RCA x 5, XLR x 1, phono x 1, power amplifier direct x 1, output terminal REC out x 2, pre-out x 1, headphone x 1, W440 x H168 x D453 mm 26.6 kg
- description
- Maintained! An improved model of the AU-D707F. Super FF and diamond differential circuits are used in the power amplifier section. It was released before CDs appeared, and the energetic sound quality that makes you feel like Sansui is attractive. I would recommend this model to all jazz and rock fans. There is a chip in the corner of the side panel (Fujisawa Yukishi) Maintenance information: 2023.11.24 maintenance completed (tone, filter (16 20k), muting switch removed, and disassembly grease applied.) 2022.12.29 Maintained (master volume, balance volume replacement, output relay replacement, headphone relay replacement, power supply floating resistor replacement, input selector, rec out switch disassembly, polishing grease application, solder repair, each volume, switch cleaning, internal inspection and cleaning, operation inspection) Accessories: copy of the instruction manual Main specifications: 100W+100W PHONO2 system with MM/MC W460 x H160 x D404 mm 14.7 kg
- description
- Accuphase entry pre-main amplifier. It is equipped with the same AAVA volume control system as higher-level models such as the E-560. Even though it's an entry-level machine, it boasts a degree of perfection that makes you feel the high quality typical of Accuphase everywhere. There are thin scrapes and small scratches on the top plate (Oikawa Tetsuji) Maintenance information: 2023.11.27 Operation confirmed Accessories: remote control, power cable, instruction manual Main specifications: 115W+115W (6Ω), 105W+105W (8Ω) W465 x H151 x D420 mm 20 kg
- description
- A transistor type premain amplifier that reminds me of the Luxman of yesteryear. The loose, warm-colored rack stones remain the same, and you can feel the ease of cutting typical of modern machines. It is an MM/MC compatible, analog compatible, and shines well with its good quality even when it's simple. The exterior is good (Kobayashi Hitoshi) Maintenance information: 2023.11.25 Operation confirmed Accessories: remote control, instruction manual, power cord Main specifications: output 50W+50W (8Ω), 75W+75W (4Ω) W402 x H169 x D330 mm 15.0 kg
- description
- A compact and convenient receiver. With a configuration of a SACD/CD player+FM/AM radio+PHONO terminal (with MM/MC compatible phono equalizer), you can easily build a compact system with good sound. There are no noticeable scratches on the exterior. Serial 3051504544 (Tamura Eiji) Maintenance information: 2023.11.26 operation confirmed Accessories: remote control, instruction manual, power cable, AM/FM antenna Main specifications: rated output 37.5 W+37.5 W, compatible speaker impedance 4 Ω to 16 Ω, frequency characteristics 10 Hz to 40 kHz, W300 x H110 x D341 mm, 8 kg
- description
- A new-generation digital premain amplifier that combines CSR's digital amplifier “DDFA (Direct Digital Feedback Amplifier).” Compared to conventional Class D amplifiers, higher S/N and lower distortion have been achieved. In particular, the USB-DAC is compatible with DSD 5.6MHz and PCM192kHz/24bit inputs, and its sound quality is more vivid and realistic than other digital amplifiers. It is also compatible with Airplay via Bluetooth connection. The exterior is dull. Serial 5103504415 (Kimiya Miura) Maintenance information: 2023.11.25 Operation confirmed Accessories: remote control, instruction manual, power cable Main specifications: USB-DAC premain amplifier 25W+25W (8Ω) 50W+50W (4Ω) input USB Type-B x 1 line RCA x 1 COX x 1 TOS x 2 Bluetooth x 1 S/N ratio 117 dB total harmonic distortion ratio 0.004% or less W200 x H86 x D258 mm weight 2.5 kg
- description
- Maintained! A popular late 80s model with a sound that has a good balance of clarity and thickness. Good parts such as power transformers, etc., and a sense of energy in the mid to low range are abilities unique to this era. It is particularly effective in jazz and rock. There are spots and small scratches over time (Fujisawa Yukishi) Maintenance information: 2023.11.24 maintenance completed (maintenance contents/input selector, etc., switch disassembly, polishing, grease application (power amplifier direct, source direct, tape, rackout, tone, muting, subsonic, loudness), balance and other volume cleaning, output relay replacement, solder main part repair, interior and exterior inspection and cleaning, offset adjustment, operation confirmation.) Accessories: copy of the instruction manual Main specifications: 90W+90W (8Ω) MM/MC compatible phono equalizer W430 x H159 x D446 mm 18 kg
- description
- Maintained! The middle class of the Sansui α series. It is also attractive that you can enjoy not only jazz, but also various genres such as rock and pop, with a good balance between the strength of the bass and the clarity of the mid and high notes. The exterior is dull and there are plug marks on the top plate. Serial 637065630 (Takahashi Nobuyuki) Maintenance information: 2023.11.23 Maintained (each switch disassembling, polishing, grease application (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, rackout switch) each volume and switch cleaning output relay and headphone relay replacement main amplifier and power unit solder repair interior and exterior inspection cleaning side cover screw replacement operation confirmation when the power is on (It makes a pop sound, but it stabilizes within a few minutes) Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 x H160 x D441mm 20.3 kg
- description
- Maintained by the manufacturer. A refined model of the PM-17SA. Further refinement has been applied to the clear, highly transparent tone with good visibility. From its thin, stylish design, the modern SN's highly delicate expressive power is appealing. The power that seems to be held back draws more precise and expressive depictions. There is dullness and a feeling of use (Sasaki Shota) Maintenance Information: 2023.11.23 Manufacturer Maintained (Muting Relay Replacement. Amp board soldering correction. Each switch/volume contact cleaning. Idling adjustment, inspection of each part.) Accessories: remote control, power cable Main specifications: Equipped with a pre-out power-in terminal, 60W+60W (8Ω), W458 x H110 x D429 mm, 16 kg
- description
- Beautiful item with original box! An integrated stereo amplifier equipped with advanced “AAVA volume control” that realizes a high signal-to-noise ratio and a low distortion rate. The power amplifier section uses high-power transistors in a parallel push-pull configuration, and the powerful power supply unit and output circuit have reduced impedance to achieve clear and clear sound with good visibility. The exterior is beautiful with no noticeable scratches. Serial F3X706 (Yonejima Satoshi) Maintenance information: 2023.11.23 operation confirmed Accessories: remote control, instruction manual, power cable, original box Main specifications: rated continuous average output 120 W/ch (4 Ω) 90 w/ch (8 Ω) damping factor 500 (8 Omega/50 Hz) W465 x H151 x D420 mm 20.4 kg
- description
- Maintained! A premain amplifier developed during the heyday of CDs and gained popularity. The deep, punchy sound quality that balances mid-high range quality and low frequency power is attractive. There's room that lower models don't have, and you can enjoy the sound that is full of scale typical of SANSUI. The exterior has small scratches and dullness. Serial 61027978 (Yonejima Satoshi) Maintenance information: 2023.11.18 maintained (tone and other switch disassembly, polishing grease application (turnover, loudness, muting, subsonic, processor, MM/MC, rackout, input selector, power amplifier direct, source direct, tape switch), main amplifier circuit part transistor, semi-fixed volume replacement, solder repair, contact repair, rear panel repair, bias, DC Adjust, clean each volume switch, and check operation. *The tape selector was slightly eccentric, but the functionality is fine) Accessories: copy of the instruction manual Main Specifications: Equipped with advanced α-X circuit 160W+160W (8Ω), damping factor 150 (8Ω), phonomm/MC compatible, W460 x H159 x D446 mm, weight 33 kg
- description
- ※Since it is inexpensive, it will be handed over as is. AIRBOW PM5005 tune model. It has punching power and good sound field visibility. You can enjoy music comfortably at a low cost. As for the exterior, there is a scratch on the top plate. Serial AEW27190609318 (Tamura Eiji) Maintenance information: 2023.11.19 operation confirmed Accessories: instruction manual, remote control, power cable, original box Main specifications: 40W+40W (8Ω) W440 x H105 x D370 mm Weight 6.7 kg
- description
- This is Luxman's mid-range premain amplifier, blaster white. It makes a well-balanced sound that is in perfect harmony between softness and strength typical of LUXMAN in recent years. You can enjoy sharp mid to low frequencies, which are different from the LUX tones of the past in popular series in general. There is a slight scuff on the top plate. Serial G40201303 (Mizushima Itsuro) Maintenance information: 2023.11.19 operation confirmed Accessories: remote control, instruction manual, power cable, original box Main specifications: 100W+100W (8Ω) 150W+150W (4Ω) PHONO (MM, MC) power consumption 270W W440 × H178 × D454 mm 22.0 kg
- description
- The price has been reduced. 2023/11/17 sales price 89,800 yen This premain amplifier is a class-A amplifier with high power of 190 W, yet has an attractive soft, thick sound quality. In particular, in large orchestras, each instrument is clearly reproduced without blurring. There are abrasions all over, and there are noticeable scratches on the back of the right side (Sasaki Shota) Maintenance information: 2023.11.17 Operation confirmed Accessories: remote control, power cable, spike receiver Main specifications: 190 W+190 W (8 Ω) W435 x H125 x D373 mm 16 kg
Manufacture:Cambridge Audio
Price: JPY 33,455 Sold Out
- description
- The price has been reduced. 2023/11/12 sales price 39,800 yen*Remote is out of stock. Cambridge Audio pre-main amplifier compatible with USB input. It is an amplifier that aims for quality above the price at a low cost, and is compatible with USB input. It features smooth sound quality that is delicate and has a high signal-to-noise ratio. The entire exterior is dull, and there is a feeling of use such as scratches and scuffs on the top surface (Kobayashi Hitoshi) Maintenance information: 2023.11.10 Operation confirmed Accessories: none Main specifications: USB input compatible (USB Audio 1.0 32, 44.1, 48 kHz/16 bit compatible) rated output 75W+75W (8Ω) size W430 x H115 x D345 mm weight 8.4 kg
- description
- Maintained! Levinson's long-selling pre-main amplifier. A dual monaural configuration thoroughly packed into one chassis while keeping the separate design concept intact. You can be satisfied with all genres of music with quality that easily surpasses separate amplifiers. As for the exterior, there is a scratch on the top plate. Serial 1900 (Miura Kimiya) Maintenance information: 2023.11.16 Maintained (springs, resistors, etc. replaced. DC voltage/DC offset voltage/other inspection adjustments) Accessories: remote control, instruction manual, power cable Main specifications: 100W+100W (8Ω) Input: XLR2 system/RCA3 system gain adjustable (preamp section 0/6/12 dB) W445 x H162 x D483 mm 29.5 kg
- description
- Maintained! The mid-level α series uses an α-X balance circuit that blocks the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, it also has good sound separation, and is a classic premain that entertains people regardless of genre. Appearance, dullness, abrasions, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi) Maintenance information: 2023.11.12 maintained (tone, following switch disassembly, polishing grease application (muting, subsonic, loudness, processor, MM/MC rackout), direct part LED replacement, output relay replacement, main amplifier part, protector part transistor replacement, power supply, amplifier part solder repair, each volume, switch cleaning, internal inspection and cleaning, offset adjustment, operation confirmation) Accessories: copy of the instruction manual Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
- description
- Maintained! This is the masterpiece VA-40. I am fascinated by the beautiful design that eliminates waste. Hitachi MOS-FETs and toroidal transformers are at the heart of this beautiful sound. It is a sound that exudes tension and strength while making you feel the warmth of human skin. It goes great with European speakers such as B&W and Dynaudio. There are scratches on the left side of the front, VOL knob, and top plate on the whole (Sasaki Shota) Maintenance information: 2023.9.1 maintenance completed (VR has been replaced with a product with the same resistance value. The ground terminal has been replaced and the burnout resistor has been replaced. (All input/output terminal function tests are excellent.) Main specifications: 40W+40W (8Ω) W430 x H55 x 276 mm 4.2 kg
- description
- Disposal prices have been reduced! (Member discounts are not applicable) 2023/10/15 sales price 128,000 yen This is a pre-main that refines resolution and spatial reproducibility, and allows you to clearly hear the details of the sound. While it has delicate splendor, it makes a powerful, low-pitched sound in marantz. Built based on the higher-level model PM-15S2, luxurious high-quality sound parts have been introduced, so you can enjoy a performance that is a notch higher. The exterior has a feeling of use such as dullness and small scratches. Serial 20000947000216 (Takahashi Nobuyuki) Maintenance information: 2023.10.15 Operation confirmed Accessories: instruction manual, remote control, power cable Main specifications: 90W x 2 (8Ω) 140W x 2 (4Ω) frequency characteristics 5Hz to 100kHz with phono MM/MC W440 x H127 x D444 mm 20 kg
Manufacture:KENWOOD
Price: JPY 8,000 Sold Out
- description
- Prices have been reduced! 2023/11/10 sales price 9,800 yen*Operation is good, but since it is inexpensive, it is currently being handed over. This is Kenwood's KA series amplifier. It has a small, clean design, and can be placed either horizontally or vertically. The sound quality is as good as it looks, and it's recommended for those who want to enjoy music in a small space with a clean sound. Serial 61100015 (Asaina Tomonori) Maintenance information: 2023.11.10 Operation confirmed Accessories: none Main specifications: 3 input lines, 12W+12W (8Ω), dimensions W171 x H67 x D207 mm, weight 2 kg
- description
- The price has been reduced. 2023/11/14 sales price 328,000 yen*There is no problem with operation, but it is cheap because it smells like cigarettes. Maintained! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich, rich sound world typical of Macintosh. A sense of power that makes you feel deep is as powerful as if it were separate. Maintenance information: 2023.11.14 maintenance completed (knob correction, tact switch replacement. (Check input/output waveforms) 2022.9.27 Maintained (each SW, VOL, loud noise → cleaning (loudness cannot be completely removed) glass panel dismantled, parts reinstalled and replaced. Replace the meter and illumination lamp. Solder fix, RCA pin jack ground float → clean Backup power supply transformer, relay pattern correction re-solder, driver board, regulator part capacitor deterioration replacement) Accessories: remote control Main specifications: 150W+150W (8/4/2Ω) phono input mm dimensions W445 x H179 x D508 mm weight 30 kg
- description
- The price has been drastically reduced! 2023/11/12 sales price 298,000 yen Maintained by Accuphase in 2021! Comes with a remote control! It is the company's popular pre-main amplifier manufactured with the pre section and power section completely independent. The high resolution that is accurate and sharp, and the sharp sound quality are appealing enough even now. The quality of phono equalizers is also high in terms of age, and I recommend them. The exterior includes small scratches, dullness, and bruises. Serial G0X909 (Yamato Yuki) Maintenance information: 2023.11.12 Operation confirmed Maintained on 2021.4.19 Accuphase (transistors, electrolytic capacitors, and resistors in the power amplifier ASSY were replaced. Replaced due to main volume loss. Replaced the capacitors in each ASSY due to deterioration. Contact cleaning for each switch volume. Reapply silicone grease. Readjust the bias current. Each function and performance can be checked. (Dielectric voltage test OK) Accessories: Remote control instruction manual copy Main specifications: 170W+170W (8Ω) PHONO input compatible (MM/MC) dimensions W475 x H180 x D375 mm, weight 25 kg
- description
- Hi-Fi Hall is in stock for the first time! LUXMAN's new AB class flagship premain. The results of the amplification feedback engine LIFES fed from the M-10X and the electronically controlled attenuator LECUA-EX are certainly excellent, and I have the impression that the sound field and sense of realism have increased and musicality has improved compared to the previous 509X. After all, I felt that their obsession with ATT was the biggest. Exterior, thin scuffs on the top plate, everything else is fine (Kobayashi Hitoshi) Maintenance information: 2023.11.11 Operation confirmed Accessories: remote control, instruction manual, power cord, original box (cushioning material is partially missing) Main specifications: 120W+120W (8Ω), 240W+240W (4Ω) input sensitivity/input impedance PHONO (MM) 2.5mV/47kΩ PHONO (MC-H) 0.3mV/100Ω PHONO (MC-L) 0.1mV/40Ω LINE 180mV/47kΩ BAL.LINE 180mV/55kΩ MAIN-IN1.1V/47kΩ output voltage PRE OUT 1V frequency characteristics PHONO 20 Hz to 20 kHz (± 0.5 dB or less) LINE 20 Hz to 150 kHz (-3.0 dB or less) total harmonic distortion ratio 0.006% or less (8 Ω, 1 kHz) 0.06% or less (8 Ω, 20 Hz to 20 kHz) S/N ratio (IHF-A) PHONO (MM) 87 dB or more PHONO (MC-H) 70 dB or more PHONO (MC-L) 62 dB or more LINE 106 dB or more. W440 x H193 x D463 mm (depth includes front knob 20 mm, back terminal 37 mm) 29.4 kg
- description
- This is Denon's popular premain amplifier. It uses the latest generation UHC-MOS FET, which was also used in the predecessor flagship model SX1, and combines subtlety and strength at a high level, and drives the speaker firmly. As for the exterior, there is a scratch on the top plate. Serial ANK151801200634 (Yonejima Satoshi) Maintenance information: 2023.11.11 operation confirmed Accessories: remote control, instruction manual, power cable, original box Main specifications: rated output 120W+120W Phono (MM/ MC switching) input x 1 system LINE input x 5 systems EXT.PRE input W435 x H181 x D506 mm 27.4 kg
Manufacture:Musical Fidelity
Price: JPY 27,091 Sold Out
- description
- ※This item is currently sold. Compact digital amplifier. It has a warm sound that isn't typical of a digital amplifier in a good sense, and it's not difficult even when paired with modern high-spec speakers. The exterior has a feeling of use such as dullness. Serial VAY0166 (Tomonori Asaina) Maintenance information: 2023.11.11 operation confirmed Accessories: power cord Main specifications: 20W 8Ω input impedance 47KΩ line level input/optical input 1 system (same 3.5mm mini jack) 1 USB input (type B) speaker output 1 pair W170 ✕ H47 ✕ D117mm 710g
- description
- Maintained! This model marks the start of the KENWOOD brand. A premain amplifier that constructs strong driving power and transparency with thorough non-magnetic materials and a separate power supply unit. It has a firm sense of stability, and it plays a clean, clear sound. The unique design is also highly popular. There is a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance Information: 2023.10.10 Maintained (Speaker ON/OFF switch replaced. Speaker relay replacement. MM/MC switching small relay replacement. Mode indicator lamp replacement. Electrolytic capacitor deterioration replacement. Exchangeable for 330u/63v, 220u/63v, 100u/63v, 100u/25v Power board A solder repair (double-sided printed circuit board). (Check DC balance, idling adjustment, and other input/output connection sounds) Accessories: power supply unit Main specifications: rated output 100W+100W (8Ω) main body W440 x H156 x D452 mm 9.5 kg Power supply part W170 x H156 x D403 mm 17.5 kg
- description
- Maintained! The α907 limited model is limited to 2000 units. A pre-main amplifier that stands out for its high SN and good tone unique to MOS-FET. The fine particle feel in the mid to high range is one of the best workmanship in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid to low range, it is one of the most famous machines, whose appeal has not faded even now. As for the external condition, there are small scratches and dullness over time, and there is slight undulation on the side panels. Serial 604055009 (Yamato Yuki) Maintenance information: 2023.11.6 maintenance completed (veneer peeling, cracked adhesion, mute, etc., switch disassembly, polishing grease application, below switch (loudness, processor, subsonic, power amplifier direct, source direct, tape, rackout), output relay, headphone relay replacement, power amplifier circuit part transistor, semi-fixed volume replacement, power circuit part transistor replacement, solder repair, bias, DC adjustment, running test) Accessories: instruction manual original box Main specifications: 80W+80W (8Ω) MM/MC compatible, MOS-FET used, W466 x H166 x D453 mm, 34 kg
- description
- Capacitors, transistors, and other deteriorated parts have been firmly replaced and brushed up! The flagship model of the 70s. Only this model has a very aggressive sound, and the sound comes out loud and forward. It's one that makes jazz and rock sound crisp, thick, and crisp, and exhilarating. Not only is the tone a bit different from modern amplifiers, but the retro face is also attractive. The exterior has small scratches, dirt, dullness, and a feeling of use (Hiura Katsugu) Maintenance information: 2023.11.2 Maintained (capacitors, transistors, semi-fixed resistors, resistors, relays, SP terminals, RCA terminals, light bulbs, lamp covers, fuse holders replaced. (Since LOUD-SW was damaged, disassembly and correction, internal cleaning of each SW class, board re-soldering, flux cleaning, circuit adjustment, internal and external cleaning, and various tests.) Accessories: copy of the instruction manual Main specifications: 80W+80W (8Ω) frequency characteristics 5Hz to 100kHz tone control/Bass, Midrange, Treble 3-stage adjustment W462 x H155 x D316mm 17.5 kg
- description
- The price has been drastically reduced! 2023/10/31 sales price 168,000 yen maintenance completed. A talented premain amplifier that has a good balance of clean mid/high frequencies and low frequencies with a strong sense of protrusion. The well-outlined sound image expression is also superb. As for the exterior, there are small scratches and dents on the cabinet. Serial A5Y389 (Kimiya Miura) Maintenance Information: 2023.10.31 Maintained (RCA jack contact replacement. Electrolytic capacitors, relays, and semi-fixed VR have each been replaced. Volumetric cleaning. Bias and offset checks. Output voice check. Interior and exterior cleaning) Accessories: instruction manual Main Specifications: 120W+120W, Power Consumption, 280W, MM/MC Compatible, 5 Line Inputs, 2 Tape Terminals, 2 Systems, Pre/Power Separable, W445 x H145 x D370 mm, 16.2 kg
- description
- The price has been drastically reduced! 2023/11/5 Sales price 148,000 yen Maintained! This is the accuphase sound from the time when high frequency sharpness was good. It has enough power in the low frequencies, and it drives powerfully even in the JAZZ and ROCK series. The exterior has small scratches and dullness. Serial A2Y571 (Tomonori Asaina) Maintenance information: 2023.5.3 Maintained (output relay tone volume (no alternative clicks), electrolytic capacitor switch, SP terminal, black (used product of the same type), switch contacts, each replacement, solder correction, contact cleaning, each input/output voice check, interior and exterior, were cleaned) Accessories: instruction manual copy power cable (general purpose) Main specifications: PHONO input, pre-main separable 110W+110W (8Ω) W445 x H160 x D370 mm 17.2 kg
- description
- The price has been reduced. 2023/8/26 Sales price 39,800 yen Maintained! A pre-main amplifier with built-in D/A that is compatible with digital input (COAXIAL). There is also a phono input (MM/MC compatible), making it one with excellent cost performance. The powerful sound in the mid to low frequencies makes me feel somewhat warm. A convenient unit that can be used for a variety of purposes, from analog to digital. In addition to the exterior, paint falling off the top plate, and many scuffs, there are many signs of use such as dullness on the front panel (Kobayashi Hitoshi) Maintenance information: 2023.8.26 Maintained (defective transistor replaced in amplifier circuit. Digital circuit power supply unit defective parts replaced. Remote wire switch disassembly, contact polishing, contact cleaner application. Solder correction on all boards. I/O pin jack polish) Accessories: none Main specifications: PHONO with digital input (MM/MC) rated output 110W+110W (8Ω) W434 x H172 x D396 mm 15.6 kg
- description
- The manufacturer has maintained it! The remote control is out of stock. Denon's mid-level premain. Phono is also attractive for its excellent cost performance, which is MM/MC compatible. A model with a natural, clean tone that is easy to match with a variety of speakers. It is also recommended as an introductory machine. There is an appearance, dullness, and a feeling of use. Serial 0021517262 (Mizushima Itsuro) Maintenance information: 2023.10.20 maintenance (input select switch replacement, SD switch contact restoration agent application, idling adjustment, operation inspection.) Accessories: power cable, copy of instruction manual Main specifications: rated output 70W+70W (8Ω), playback frequency band 5Hz to 100kHz, input, 5 systems, output, 2 systems, dimensions: W434 x H134 x D410 mm, weight: 14.6 kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
