The disposal price has been reduced! Member prices are not applicable. 2024/3/26 sales price 25,000 yen An easy-to-use balance line selector. It is 3 input systems/1 output system. The LR input/output terminals are arranged symmetrically, the LR internal wiring is also divided into left and right, and mutual interference between LRs is reduced by using a separate L/R structure. There are fine scratches and paint peeling on the exterior. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: W250 x H64 x D117 mm 2.3 kg
A storage type with 5 cartridge keepers similar to the FR K-5. A convenient case for storing important cartridges. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W300×H45×D120mm
MayRecord stylus cleaner If you've been looking for this type, take this opportunity. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: original box
24K gold-plated inlet plug If you've been looking for one, take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.31 continuity confirmed
Accessories: instruction manual, original box
Shure's classic needle pressure gauge. Needle pressure can be adjusted in 0.05g increments. Since there are 2 measurement positions, tracking forces can be measured up to 3 grams. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: original box
TEAC electronic stylus cleaner. Stains on the needle tip are removed by vibrating. There is no doubt that this item will come in handy if you have one. There is a feeling of use on the exterior, dullness, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.3.31 Operation confirmed
Accessories: none
SONY CD CLEANER. It would come in handy if you had one. If you've been looking for one, go ahead. There are cracks in the exterior and case, as well as dullness and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Case included. Y-lug exclusive banana plug set of 4 has a monocoque structure, so there is no deterioration in sound quality inside the plug. The entire body from the tip to the cable clamp is pink gold plated, so each contact part does not deteriorate even during long-term use (Murakoshi Yoichi)
Accessories: original box
Main specifications: Compatible with Y-lugs of approx. 6 mm to approx. 8 mm
We've reduced the price! 2024/3/30 selling price 5,000 yen Granite board from unknown manufacturer. How about a pair of mirrored, beveled, medium floor speakers, etc. The exterior is dull and has a feeling of use (Jun Tamai)
Accessories: none
Main specifications: size W450mm x H30mm x D400mm weight 15kg (actual measurement)
Dry record cleaner made with premium velvet. The shape is easy to hold, and records can be cleaned effectively. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Case included. Y-lug exclusive banana plug set of 4 has a monocoque structure, so there is no deterioration in sound quality inside the plug. The entire body from the tip to the cable clamp is pink gold plated, so each contact part does not deteriorate even during long-term use (Murakoshi Yoichi)
Accessories: original box
Main specifications: Compatible with Y-lugs of approx. 6 mm to approx. 8 mm
Tin/copper 2-layer Fostex PPTA film capacitor for speaker networks. The exterior is dull and has a slight feeling of use (Jun Tamai)
Accessories: none
Key Specifications: Capacitance μF 0.33 μF
Tin/copper 2-layer Fostex PPTA film capacitor for speaker networks. The exterior is dull and has a slight feeling of use (Jun Tamai)
Accessories: none
Main specifications: capacity 1.0 μF DC withstand voltage 120 V DC AC withstand voltage 240 V AC weight 41 g
A storage type with 5 cartridge keepers similar to the FR K-5. A convenient case for storing important cartridges. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W300×H45×D120mm
Set of 4 A wood block speaker stand made of laminated chipboard. There are scratches and broken veneers (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H190×D390mm 5.2 kg/bottle
Special stand for Sonas Fabers. Italian walnut wood is assembled, and marble, a specialty of the Tuscan region, is used as a base, and you can feel the beauty of handicraft as well as a sense of stability (Daiki Goto)
Accessories: none
Main specifications: Height 600 mm Top plate: W170 x D200 mm Bottom plate: W320 x D320 mm 15 kg/bottle
A rare item! Audiocraft bi-amp adapter. It distributes 1 input system to 3 systems. Recommended for multi-faceted people. It is also equipped with a phase selector (Oikawa Tetsuji)
Accessories: none
Main specifications: W312 x H80 x D120 mm (actual measurement)
Technica headphone stand Hard and sturdy beech wood is used for the top wood and base wood. This headphone stand pursues interior design and ease of use. There is a small wound (Oikawa Tetsuji)
J1 project isolation board (small size). pair. This board is perfect for standing tall boy speakers on the floor, between small bookshelf speaker stands and speakers, and underneath small components. There are a lot of line wounds (Oikawa Tetsuji)
Main specifications: 250 x 300 x 20 mm
Set of 4 Supra banana plugs Since it can also be connected, it can be used for various purposes, such as installing a super tweeter. 24K plating Overall there is dullness (Oikawa Tetsuji)
Accessories: none
※One felt foot is missing, so one side is tilted. There are a lot of scratches. When connected to a speaker, it reduces speaker impedance fluctuations in the mid to high range. More faithful speaker driving is possible, speaker resolution and stand-up are improved, and natural afterglow is also reproduced (Oikawa Tetsuji)
Accessories: none
Main specifications: W100 x H47 x D117 mm approx. 190 g/piece
This item converts unbalanced input to balanced output. It has a loop through function. The exterior has scratches and paint bald spots (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: instruction manual
Main specifications: 4 unbalanced inputs, 4 balanced outputs, W210 x H44 x D230 mm, 2.3 kg
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
※There is no problem with the operation, but since there is no manufacturer, it will be handed over as is. CSE isolation regulator. It is recommended for those who live in the Kanto area and have a 60Hz player or the like. The exterior has some dullness and scratches. Serial 710716 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main Specifications: Isolation Regulator Input Voltage 90-110V Rated Output Voltage 100V Rated Output Power 30W W214 x H85 x D163 mm 4 kg
Sony's RCA. This is a cable connection plug. If you've been looking for one, please take this opportunity. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
A rare line transformer for CDs in stock. It is used by connecting between the CD output terminal and the amplifier input terminal. The digital smell is eliminated, and the sound is supple and taut. It's an excellent product that doesn't lose sound even when the volume is low. *It appears to be “MK2” from the writing on the back. There are small scratches and scratch marks on the exterior (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: dimensions W150 x H75 x D130 mm, weight approx. 2 kg
※It is inexpensive because it is in poor condition, such as rust. Set of 4 high-carbon cast iron stands with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has rust spots, dirt, etc. (Tamura Eiji)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
Set of 2 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has a feeling of use such as being dull or torn in felt (Tomoho Asaine)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product There is dirt on the exterior (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
Accoliba RCA short pins, set of 8 A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. There is no guarantee even if the sound stops coming out or if it breaks down by any chance (Oikawa Tetsuji)
Accessories: none
Set of 4 Y lugs Oyaide's screw-fastening Y lug terminals are made in Japan with excellent processing accuracy. This is a high quality sound plug that provides a wider range and a sense of density. There is little feeling of use (Oikawa Tetsuji)
Accessories: original box, wrench
Main specifications: Dual screw clamp system, pure domestic copper alloy (RoHS compatible), pure silver plating (1.5 μm) + platinum plating (0.3 μm), inner diameter 8.0 mm, compatible cable diameter 4.0 mm
Air bow stabilizer. Can be used with all AIRBOW belt drive CD transporter players and CEC TL3, TL3N, TL5100, TL51 Series, etc. (Tamura Eiji)
Accessories: original box, manual
A very rare Lux noise cutting transformer. It cuts harmful noise from the power supply and enables high-quality music playback. What is the exterior. There are threads and dullness. Serial 21030124 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: instruction manual
Main specifications: W231 x H137 x H207 mm 6.9 kg
Details unknown. Corian board of the same size as the AIR BOW DCB44412 The size seems to be just right for amplifiers, CD players, etc. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W490 x H12 x D440 mm 4.6 kg (actual measurement)
Details unknown. Corian board of the same size as the AIR BOW DCB44412 The size seems to be just right for amplifiers, CD players, etc. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W490 x H12 x D440 mm 4.6 kg (actual measurement)
This is an arm base for THORENS TD124 with unknown details. OrtoFon's RMA309 was mounted. There is a feeling of use due to appearance, dullness, mounting scratches, etc. (Kobayashi Hitoshi)
SOUND BOX DOUBLE ARM CABINET FOR GARRARD301 A must-see for 301 users! Starting with the arm base for SME, Ortofon, etc., a spare base is also attached, so you can mount an arm of your choice. If you've been looking for one, please take this opportunity! The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Accessories: arm base
Main specifications: W560 x H100 x D467 mm 6.5 kg (actual measurement)
The price has been reduced! 2024/3/17 sales price 29,800 yen It is essential for those who use heavy weight weight weight weight cartridges for FR64fx. I have dullness (Tomoho Asaine)
Accessories: none
Main specifications: dead weight 255 g
Set of 3 metal spike bases Details are unknown, but it is an affordable and easy to use type. There is a feeling of use on the exterior such as scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size 35φ×H7mm, weight 32g (actual measurement)
Banana plug with negative ion coating. It seems that improvements in sound quality can be expected. The condition is dullness over time and small scars. (Yamato Yuki)
※Inexpensive due to dullness, scratches, etc. Taok cast iron speaker stand This is a standard stand that tightens the bass and constructs an accurate sound image (Oikawa Tetsuji)
Accessories: spike, spike receiver
Main specifications: top plate W200×D240mm bottom plate W250×D300mm height 600mm 14kg
HDMI switcher with 4 inputs and 2 outputs. The video and sound of an HDMI device can be switched and output to 2 monitors, projectors, etc. It is equipped with 3 audio outputs: a 3.5 mm stereo mini jack, coaxial digital, and optical digital terminals. There are small scratches etc. on the exterior (Tamai Jun)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: instruction manual, original box, AC adapter
Main specifications: size W190 x D97 x H25 dead weight 416 g
Hamilex speaker stand Dark brown with a high texture. Uses a PVC sheet with excellent durability. It is recommended for those who listen to it on the sofa at a slightly lower level. There are slight scratches and creases (Murakoshi Yoichi)
Accessories: none
Main specifications: total load capacity 20 kg, top plate 190 x 230 mm, W230 x H450 x D 295 mm, approx. 3 kg
The small B&W speaker stand is just the right size for the company's 600 series and is sturdy. The exterior has an overall feeling of use and stains (Ryo Mizusaki)
Accessories: instruction manual, spikes
Main specifications: top plate W180×D200mm bottom plate W240×D300mm H610mm weight 9.1 kg/1 bottle