Set of 4 Technica cable terminator OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.15 continuity confirmed
Accessories: none
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
The price has been drastically reduced. 2024/3/6 sales price 45,000 yen Accuphase built-in phono equalizer board. For analog record playback, you can switch MM/MC equalizer gain, set MC input impedance, and subsonic filter ON/OFF with an internal dip switch. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main Specifications: Compatible Models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530,, *In the case of E-550/E-350/E-450/C-2110, MC/MM switching is performed on the panel surface, so there is no need for settings on the board. E-550 E-350 E-450 C-2110
Unopened Unspecified spikes, set of 4 spike receivers The exterior is unopened, but it is dull (Kobayashi Hitoshi)
Accessories: none
Key Specifications: Spike length 40mm insulator W17mm H6mm
Unspecified transformer case. The exterior is probably an unused item (Kobayashi Hitoshi)
Accessories: screws
Main specifications: W110 x H115 x D130 mm weight 1.3 kg
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Set of 4 banana plugs There is a description of NAKAMICHI, but the details are unknown. It is small and seems to be easy to handle. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Set of 4 banana plugs There is a description of NAKAMICHI, but the details are unknown. It is small and seems to be easy to handle. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Set of 2 RCA short pin plugs from the “Stereo” magazine appendix. By shorting unused input terminals, the circuit is stabilized and sound quality is improved (Asaine Tomo)
Accessories: none
Unspecified spike receptacle set of 3 There is a feeling of use due to appearance, dullness, scratches, etc. (Asaine Tomoho)
Accessories: none
Main specifications: size 30φheight 10mm weight 16g
※It is inexpensive because it has a cigarette smell, dirt, and deposits. Premium power amplifier/speaker selector. It uses a silver-plated contact mechanical switch to convey the original sound quality as it is. As a speaker selector, you can switch and select up to 3 pairs of speakers from one power amplifier output. Alternatively, as an amplifier selector, you can switch and select up to 3 power amplifier outputs for a pair of speakers. There are scratches, adhesions, and dirt on the exterior (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 3 inputs/1 output system, or 1 input/3 output systems, continuous passing power 250W (8Ω), W250 x D142 x H64 mm, weight 2.4 kg
Comes with original box A machined aluminum alloy separate structure and parallel wiring are realized at this price. The SAA-6SZ MK2 uses the latest independent wiring “super separate” and spike legs, and the center outlet uses a rhodium-plated outlet. Highly recommended for those who prefer vivid resolution. Serial A061411MR (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: original box
Main specifications: rhodium outlet x 1, BRYANT outlet x 2 W400 x H70 x D43 mm 2.5 kg
This is a collet chuck stabilizer. Since it is a type where the center spindle is tightened when the center push button is pressed, it can be fixed more reliably. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: 59 mm in diameter x 34 mm in height, weight 164 g
Audiocraft brass disc stabilizer. Stable playback is possible with a tight weight. Comes with a stroboscope for convenience. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: diameter 79 mm x height 20 mm weight 730 g
The price has been reduced! 2024/4/12 sales price 3,000 yen ※Since operation has not been checked, it is currently on sale. A power distribution system composed of PD2 power distributors and DC cords. If you are looking for one, please take this opportunity. Velcro is attached to the bottom. Serial 095PD2069 (Tomonori Asaine)
Maintenance Information: 2024.4.12 Operation Unchecked
Accessories: instruction manual, AC adapter, DC cord
Main specifications: size 160 mm 35 mm 110 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/15 sales price 1,000 yen It seems to be a VELA series saran net, but details are unknown. It is a 4-point magnetic type. The condition is generally good. If you've been looking for one, why don't you take this opportunity (Tomonori Asaine)
Accessories: none
Main specifications: 160 mm in diameter (actual measurement)
The price has been reduced! 2024/4/11 selling price 5,000 yen unspecified armrest and base set. It is similar to the micro RX-1. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
Main specifications: armrest size W15m x H75mm base hole inner diameter 17mm length 120mm (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/22 sales price 1,000 yen*1 is the pillar of the company's “CL Series” and “XL Series” racks. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: pole length 200mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/20 sales price 2,000 yen, set of 8 wooden blocks. Details are unknown. Can be used as an insulator for small speakers (Hiroki Aso)
Accessories: none
Main specifications: W42 x H42 x D42 mm 54 g (actual measurement)
Self-made bulk capacitor with unknown details. Sound quality is enhanced, and response can be expected to improve. The exterior is generally good (Hiroki Aso)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: none
These are 6 outlet caps whose details are unknown. Definitely for those who like to write their own. In addition to being dull on the exterior, there is a feeling of use, such as the damping sheet being partially peeled off (Hiroki Aso)
Accessories: none
Main specifications: size: width 35 m x height 30 mm, total pin length 3.5 mm (actual measurement)
A set of non-original remote control and light receiver for Studer. Operation has been confirmed with the D730 at the store. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: none
PSE standard product This is a power inline filter that is sandwiched between the power cable and the power tap or audio device. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
A rare item has arrived. Carbon arm pipe with integrated shell for STAX UA-70N/UA-90N How about if you're looking for one? (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: overhang gauge
XLR noise stopper cap It is for XLR input terminals, and not only prevents broadband noise intrusion from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
Noise stopper for XLR (balanced) output terminals. It not only prevents broadband noise from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
This is an antistatic brush for records. It is an ultra-fine fiber with a diameter of 0.03 mm that penetrates into the record groove, and simultaneously removes static electricity and dust while discharging static electricity into the air. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: W127 x H40 x D39 mm 41 g
Short-pin anti-vibration plug for RCA input terminals. It is used by attaching it to an empty analog or digital input terminal of the device. It has noise cutting+reinforced anti-vibration effects. By applying the quartz resonator QR-8, the sound is even fresher and more vivid. It also improves texture. It has a completely non-magnetic structure with gold plating, ultra-high precision processing by domestic suppliers, and is full of attention that only Acoliba can do. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: brass+2017 aluminum alloy, set of 8, 32 mm x diameter, 11.5 mm, weight 10 g/1 bottle (actual measurement)
The price has been reduced. 2024/2/26 sales price 1,500 yen. A high-precision level gauge that is essential for leveling players. This is a long-selling model with an aluminum body. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
PSE standard national hospital grade outlet. A classic tap that became the foundation of the wall boom. For JIS Kikaku Hospitals, the compression strength is strong and has a positive effect on sound quality and video. The exterior has scratches and a feeling of use (Hiroki Aso)
Accessories: none
Main specifications: voltage 125 V amperage 15 A
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter, instruction manual
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter, instruction manual
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter, instruction manual
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2024/2/26 sales price 1,200 yen. *Currently sold. BTL compatible 1:2 amplifier/speaker selector. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.24 Operation confirmed
Accessories: none
Main specifications: W66 x H27 x D84 mm (excluding protrusions) Weight 126 g
※It is currently sold because it is cheap. dbx noise reduction. When recording, the dynamic range of the input signal is compressed to 1/2 with db, and during playback, the decoder expands it by 2 times in reverse. It has a noise reduction effect of 30db or more in all audible frequency bands. The exterior has line scratches and dullness (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: instruction manual
Main specifications: W439 x H48 x D188 mm 2.1 kg
Set of 4 pairs of pin plate insulators Since it is made of 2 different materials, you can enjoy the difference in sound quality by replacing the top and bottom. There is a scratch (Daiki Goto)
Main specifications: advanced high carbon cast iron diameter 50mm x height 12mm dead weight 155 g
Set of 4 pairs of pin plate insulators Since it is made of 2 different materials, you can enjoy the difference in sound quality by replacing the top and bottom. There is a scratch (Daiki Goto)
Main specifications: advanced high carbon cast iron diameter 50mm x height 12mm dead weight 155 g
An audio board using porous metal plate rusks made by sintering and molding small pieces of mouse cast iron on both sides of the board. Mouse cast iron has a high bass absorption effect and exhibits excellent bass absorption effects in boomy environments. The exterior has scratches, dullness, stains, tears, and dents (Daiki Goto)
Accessories: none
Main specifications: W450 x H30 x D350 mm weight 11.2 kg
I think it's a shelf board for the company's rack GS-622. It is in good condition (Daiki Goto)
Accessories: original box
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
I think it's a shelf board for the company's rack GS-622. It is in good condition (Daiki Goto)
Accessories: original box
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
PSE certified product. Matsushita's classic power plug opened up the world of audio power plugs. It is a long-time hospital-grade seller that can be used by beginners to advanced users (Tomoho Asae)
Accessories: original box
PSE certified product. Matsushita's classic power plug opened up the world of audio power plugs. It is a long-time hospital-grade seller that can be used by beginners to advanced users (Tomoho Asae)
Accessories: original box