The price has been reduced. 2022/8/27 selling price 12,000 yen A short horn of unknown manufacturer that can be attached to a 1-inch driver of JBL. Deadening has been applied to the metal body to make a sound skip. There is a lot of feeling of use (Hitoshi Kobayashi)
Accessories: none
Main specifications: W380 × H164 × D280 mm
There is only one bottle. With throat adapter HA21 (JBL/ALTEC compatible) (Koshihama Yasuhito)
Accessories: none
Main specifications: Sectoral horn cutoff 250Hz opening W608 × H248 mm W700 × H320 × D500 mm
An external brass horn that can be used for JBL 075, 2405, 077, etc. Please enjoy the change in sound and appearance that changes drastically with the horn (Fujisawa Yukishi)
Accessories: none
Main specifications: weight kg/piece
This is a 1 inch throat for Raftcraft. I was able to install a 1-inch driver from JBL and ALTEC. The exterior is scratched, and the paint is bald. (Ryo Mizusaki)
Accessories: none
Main specifications: W132 × H115 × D180 mm 1.3 kg/1 bottle
The disposal price has been reduced! Member prices are not applicable. 2022/8/9 selling price 198,000 yen A horn for 2 inches using laminated Eastern oak lumber. The natural, moisturized sound is attractive. Please enjoy it with the TAD TD-4001, JBL2440, etc. There is a scratch on the back of the horn part on one side (Oikawa Tetsuji)
Main Specifications: Eastern Oak Finish 588 x 191 x 328 Diffraction Horn Recommended Crossover Frequency: 700 Hz Directivity: Horizontal 110° Vertical 40° W585 x H191 × D328mm 9.6kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/6/10 Selling price 89,800 yen Raft Craft's 2-inch throat is mounted on JBL's professional large radial horn. Of course, the JBL can be mounted as it is. A radial horn with a straight sound and a profound way of sounding with a moderate spread. Please try the sound with good sound skipping that was also used for large output outdoor use. The exterior has been repainted, and there is a slight stickiness and paint peeling off. Serial 11462/11474 (Eiji Tamura)
Accessories: No accessories
Main specifications: Radial horn crossover 500Hz for 2 inches Directivity: horizontal 60° x vertical 40° W613 × H203 × D508mm 9.5 kg/1 bottle
Honeycomb Horn for 1" Driver It is recommended for those who use JBL LE175 and LE85. There is dullness and peeling. Serial 4823 4876 (Asaine Tomoho)
Accessories: none
Main specifications: Crossover frequency 1200 Hz recommended directivity 60 degrees (cone) horn total length 171 mm Compatible unit LE175 LE85
* It is inexpensive because there are many scratches. JBL 2 inch screwdriver wooden horn Originally designed only for concert halls, it is a horn that spreads the sound over a wide area without difficulty. Since it is made of wood, it echoes a warm and soft tone that is different from metal. (Ryo Mizusaki)
Accessories: none
Main specifications: Directivity 140 degrees × 60 degrees (horizontal × vertical) crossover frequency 800 Hz W660 × H95 × D340 mm Weight 4.4 kg
* It is painted black and is inexpensive because there are paint unevenness, paint peeling, and scratches. Attach a 2-inch driver such as a professional large radial horn 2440 and enjoy a thick, exciting sound. The powerful sound pressure that goes straight is a masterpiece. It is also recommended as an introductory machine for large horns (Tetsuji Oikawa)
Accessories: none
Main specifications: Crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 × H615 × D215 mm 13.8 kg/book 11.3 kg
There is no label on one side, so it is cheap. bi-radial horn for JBL 2" drivers Because there is no depth and the opening is large, it makes you listen to a light and open sound. It is a horn that can be played quite a bit because it is small and lightweight with a mild sound without tightness (Oikawa Tetsuji)
Accessories: none
Main specifications: bi-radial horn cutoff for 2 inches 400Hz horizontal 60 degrees vertical 40 degrees throat diameter 5cm dimensions W445xH279xD236mm weight 2.2kg (1 bottle)